A compact CPW-fed wideband metamaterial-inspired antenna for GSM, WLAN/Wi-Fi, and WiMAX applications

2016 ◽  
Vol 9 (3) ◽  
pp. 567-571 ◽  
Author(s):  
Ashish Gupta ◽  
Raghvendra Kumar Chaudhary
Keyword(s):  
Transmission Line ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Radiation Efficiency ◽  
Asymmetric Structure ◽  
Impedance Bandwidth ◽  
Radiation Characteristics ◽  
Average Gain ◽  
Lumped Parameters

A compact coplanar waveguide (CPW)-fed wideband metamaterial-inspired antenna is designed and developed in this paper. The proposed structure is an asymmetric structure in which three rectangular stubs are employed between signal patch and CPW ground plane. It is demonstrated that these stubs provides lumped parameters of conventional epsilon-negative transmission line (ENG-TL). As an advantage of these stubs proposed antenna operates on 1.67–2.76 GHz with −10 dB impedance bandwidth of 49.2%. The proposed antenna having small electrical size of 0.17λ0 × 0.35λ0 × 0.01λ0 at fo = 2.21 GHz. The simulated average gain and radiation efficiency of the proposed antenna is 1.61 dB and 96.33% respectively throughout the bandwidth. Properties such as smaller electrical size, simpler design, consistent radiation characteristics, and ease of fabrication are making this antenna suitable for GSM, WLAN/Wi-Fi, Bluetooth, and WiMAX applications.

scholarly journals Coplanar Waveguide-Fed Bidirectional Same-Sense Circularly Polarized Metasurface-Based Antenna

2021 ◽  
Vol 21 (3) ◽  
pp. 210-217
Author(s):  
Cho Hilary Scott Nkimbeng ◽  
Heesu Wang ◽  
Ikmo Park
Keyword(s):  
Reflection Coefficient ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Axial Ratio ◽  
Radiation Efficiency ◽  
Impedance Bandwidth ◽  
Antenna Gain ◽  
Circularly Polarized ◽  
Feed Line

This paper presents the design of a bidirectional same-sense circularly polarized (CP) antenna that uses metasurfaces. The antenna consists of two metasurfaces, each comprising an array of 2 × 4 corner truncated patches placed back-to-back on the top and bottom of the antenna. In addition, a ground plane with an etched slot is sandwiched between the substrates at the front and back, and the feed line is a 50 Ω coplanar waveguide. The antenna radiates same-sense right-handed CP waves in both the front and back directions and has overall dimensions of 48 mm × 24 mm × 3.048 mm (0.91λo × 0.45λo × 0.05λo at 5.7 GHz). The measured reflection coefficient for |S11| < -10 dB yields an impedance bandwidth of 5.21–6.26 GHz (18.4%) and an axial ratio (AR) bandwidth of 5.36–6 GHz (11.2%) for both front and back directions. The antenna gain is 3–5.29 dBic for both directions and has a radiation efficiency of >96% within its AR bandwidth.

scholarly journals CPW-fed circularly-polarized antenna array with high front-to-back ratio and low-profile

Open Physics ◽  
2018 ◽  
Vol 16 (1) ◽  
pp. 651-655 ◽  
Author(s):  
Yilin Liu ◽  
Kama Huang
Keyword(s):  
Antenna Array ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Axial Ratio ◽  
Antenna Design ◽  
Impedance Bandwidth ◽  
Feeding Method ◽  
Circularly Polarized ◽  
Low Profile ◽  
Novel Design

Abstract A novel design of a coplanar waveguide (CPW) feed antenna array with circular polarization (CP) and a high front-to-back ratio is described. The proposed CP array is achieved by using a compact CPW–slotline transition network etched in the ground plane. The measured results show that this kind of feeding method can improve the impedance bandwidth, as well as the axial ratio bandwidth of the CP antenna array and provide adequate gain. The proposed array can achieve a 6.08% impedance bandwidth and a 4.10% CP bandwidth. Details of the antenna design and experimental results are presented and discussed.

scholarly journals Reconfigurable 2×1 CPW-Fed Rectangular Slot Antenna Array (RSAA) Based on Graphene for Wireless Communications

2021 ◽  
Vol 36 (6) ◽  
pp. 788-795
Author(s):  
Dalia Elsheakh ◽  
Osama Dardeer
Keyword(s):  
Wireless Communications ◽  
Antenna Array ◽  
Coplanar Waveguide ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Average Gain ◽  
Rectangular Slot ◽  
High Data ◽  
Peak Gain

This article presents a 2×1 CPW ultra wideband rectangular slot antenna array (UWB-RSAA) with a modified circular slot shape to support a high data rate for wireless communications applications. The proposed antenna array dimensions are 0.7λ×0.8λo×0.064λo at the resonant frequency 1.8 GHz. It is fabricated on Rogers RO4003 substrate and fed by using a coplanar waveguide (CPW). A graphene layer is added on one side of the substrate to realize frequency reconfigurability and improve the array gain. The proposed array acquires -10 dB impedance bandwidth of the RSAA that extends from 1.7 GHz to 2.6 GHz, from 3.2 to 3.8 GHz, and from 5.2 GHz to 7 GHz. The proposed array achieved a realized peak gain of 7.5 dBi at 6.5 GHz at 0 Volt bias with an average gain of 4.5 dBi over the operating band. When the graphene bias is increased to 20 Volt, the antenna bandwidth extends from 1 GHz to 4 GHz and from 5 to 7 GHz with a peak gain of 14 dBi at 3.5 GHz and an average gain of 7.5 dBi. The linearly polarized operation of the proposed array over the operating bands makes it suitable for short-range wireless communications .

scholarly journals Design of a Substrate-Integrated Fabry-Pérot Cavity Antenna forK-Band Applications

2015 ◽  
Vol 2015 ◽  
pp. 1-12 ◽  
Author(s):  
Truong Khang Nguyen ◽  
Ikmo Park
Keyword(s):  
Coplanar Waveguide ◽  
Ground Plane ◽  
Cost Effective ◽  
Frequency Selective Surface ◽  
High Gain ◽  
Hole Array ◽  
Impedance Bandwidth ◽  
Low Profile ◽  
Fabry Perot ◽  
Feeding Structure

This paper presents the design of a planar, low-profile, high-gain, substrate-integrated Fabry-Pérot cavity antenna forK-band applications. The antenna consists of a frequency selective surface (FSS) and a planar feeding structure, which are both lithographically patterned on a high-permittivity substrate. The FSS is made of a circular hole array that acts as a partially reflecting mirror. The planar feeding structure is a wideband leaky-wave slit dipole fed by a coplanar waveguide whose ground plane acts as a perfect reflective mirror. The measured results show that the proposed antenna has an impedance bandwidth of more than 8% (VSWR ≤ 2), a maximum gain of 13.1 dBi, and a 3 dB gain bandwidth of approximately 1.3% at a resonance frequency of around 21.6 GHz. The proposed antenna features low-profile, easy integration into circuit boards, mechanical robustness, and excellent cost-effective mass production suitability.

scholarly journals Bandwidth Enhancement Technique of the Meandered Monopole Antenna

2015 ◽  
Vol 2015 ◽  
pp. 1-6
Author(s):  
Chien-Jen Wang ◽  
Dai-Heng Hsieh
Keyword(s):  
Communication Systems ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Matching Condition ◽  
Resonant Mode ◽  
Monopole Antenna ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Feeding Structure

A small dual-band monopole antenna with coplanar waveguide (CPW) feeding structure is presented in this paper. The antenna is composed of a meandered monopole, an extended conductor tail, and an asymmetrical ground plane. Tuning geometrical structure of the ground plane excites an additional resonant frequency band and thus enhances the impedance bandwidth of the meandered monopole antenna. Unlike the conventional monopole antenna, the new resonant mode is excited by a slot trace of the CPW transmission line. The radiation performance of the slot mode is as similar as that of the monopole. The parametrical effect of the size of the one-side ground plane on impedance matching condition has been derived by the simulation. The measured impedance bandwidths, which are defined by the reflection coefficient of −6 dB, are 186 MHz (863–1049 MHz, 19.4%) at the lower resonant band and 1320 MHz (1490–2810 MHz, 61.3%) at the upper band. From the results of the reflection coefficients of the proposed monopole antenna, the operated bandwidths of the commercial wireless communication systems, such as GSM 900, DCS, IMT-2000, UMTS, WLAN, LTE 2300, and LTE 2500, are covered for uses.

scholarly journals A Wideband Circular Polarized Antenna using Coplanar Waveguide

2019 ◽  
Vol 8 (6S4) ◽  
pp. 587-589
Keyword(s):  
Circular Polarization ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Rectangular Slot ◽  
Feed Line ◽  
Polarization Characteristics ◽  
Orthogonal Phase

A wideband coplanar waveguide (CPW) antenna with circular polarization characteristics using modified ground slot is studied in this work. Proposed design incorporates a hexagonal slot instead of rectangular slot, accounting for enhanced impedance matching. This ground slot is energized by a 50Ω feed line, resulting in excitation of two orthogonal phase quadrature modes (even-odd modes). Thus, fulfilling the essential criteria required for realizing circular polarization. A narrow horizontal slit (lg) is embedded in the ground plane at immediate left of feed line, accounting for wideband characteristics. 10dB impedance bandwidth of proposed antenna extends from 2.65- 5.60 GHz, while 3dB axial ratio bandwidth extends from 3.90- 5.80 GHz. Hence, overlapping bandwidth of proposed antenna extends from 3.90 - 5.60 GHz. RHCP characteristics with monopole radiation pattern makes proposed antenna useful for WLAN, radio navigation and radiolocation applications.

scholarly journals Design of Ultra Wideband Antenna

2020 ◽  
Vol 8 (5) ◽  
pp. 3988-3990
Keyword(s):  
Return Loss ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Dielectric Substrate ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Uwb Antenna ◽  
Rectangular Patch ◽  
Microstrip Feed

In this paper, A coplanar waveguide (CPW) ultra-wideband(UWB) antenna is designed, analyzed and simulated by computer simulation technology(CST). The proposed antenna is fabricated on FR-4 dielectric substrate. A microstrip feed line is used to excite the antenna.The ground plane is slotted to improve the impedance bandwidth (BW). Here, a rectangular patch is used as radiator and two corners out of four are truncated to improve impedance matching and UWB characterization.This antenna satisfies UWB characteristics like VSWR<2, Return loss(S11)<-10 dB,Gain<5dB and the antenna is operating within the frequency range of 1.59 to 11.87 GHz range which covers whole ultra wideband i.e. 3.1 to 10.6 GHz range.

A flexible broadband antenna for IoT applications

2020 ◽  
Vol 12 (6) ◽  
pp. 531-540 ◽  
Author(s):  
Abdullah Al-Sehemi ◽  
Ahmed Al-Ghamdi ◽  
Nikolay Dishovsky ◽  
Gabriela Atanasova ◽  
Nikolay Atanasov
Keyword(s):  
Flexible Substrate ◽  
Coplanar Waveguide ◽  
Radiation Efficiency ◽  
Woven Fabric ◽  
Impedance Bandwidth ◽  
Minor Effect ◽  
Broadband Antenna ◽  
Iot Applications ◽  
Antenna Performance ◽  
A Minor

AbstractA flexible broadband antenna with high radiation efficiency for the Internet of Things (IoT) applications is presented. The design is based on a U-shaped and a triangular-shaped radiator with two tuning stubs. A 50 Ω coplanar waveguide (CPW) transmission line is employed to feed the antenna. The proposed antenna is fabricated on a flexible substrate from a composite synthesized by mixing natural rubber with SiO2 as a filler. The radiating elements, along with the CPW, are built using a highly conductive woven fabric. Results show that the antenna has a simulated and measured impedance bandwidth of 0.856–2.513 GHz and covers the most commonly used wireless communication standards and technologies for IoT applications. The radiation efficiency of the antenna reaches over 75% throughout the operating frequency band with satisfactory radiation patterns and gain. The flexible antenna was also tested under bending conditions. The presented results demonstrate that bending has a minor effect on the antenna performance within the target frequency range. The measured results show a good agreement with simulations.

CPW-fed circular-shaped fractal antenna with three iterations for UWB applications

2015 ◽  
Vol 9 (2) ◽  
pp. 373-379 ◽  
Author(s):  
Sarthak Singhal ◽  
Ankit Pandey ◽  
Amit Kumar Singh
Keyword(s):  
Coplanar Waveguide ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Fractal Antenna ◽  
Frequency Range ◽  
Fractal Structures ◽  
Antenna Structure ◽  
Uwb Applications ◽  
Good Agreement

A coplanar waveguide (CPW)-fed circular-shaped fractal antenna with third iterative orthogonal elliptical slot for ultra-wideband applications is presented. The bandwidth is enhanced by using successive iterations of radiating patch, CPW feedline, and tapered ground plane. An impedance bandwidth of 2.9–20.6 GHz is achieved. The designed antenna has omnidirectional radiation patterns along with average peak realized gain of 3.5 dB over the entire frequency range of operation. A good agreement is observed between the simulated and experimental results. This antenna structure has the advantages of miniaturized size and wide bandwidth in comparison to previously reported fractal structures.

scholarly journals A Novel Compact CP Antenna with Wide Axial Ratio Bandwidth for Worldwide UHF RFID Handheld Reader

2019 ◽  
Vol 2019 ◽  
pp. 1-9 ◽  
Author(s):  
Waleed Abdelrahim Ahmed ◽  
Feng Quanyuan
Keyword(s):  
Radio Frequency Identification ◽  
Low Cost ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Axial Ratio ◽  
Plane Layer ◽  
Impedance Bandwidth ◽  
Uhf Rfid ◽  
Frequency Identification ◽  
The Right

This study presents a novel compact circularly polarized antenna for universal ultrahigh-frequency (UHF) radio-frequency identification (RFID) handheld reader applications. The antenna is composed of a coplanar waveguide (CPW) L-shaped feedline mounted at the right edge of the square slot at the bottom of the ground plane to realize a circular polarization; a horizontal stub protruded from the right side of the square slot towards the slot centre, and a vertical stub is mounted at the lower left of the square slot. The designed antenna printed on one ground plane layer of a low-cost FR4 substrate with an overall size of 120×120×1.6 mm3. The measurement results show indicate that the fabricated antenna achieves a wide axial ratio (AR) bandwidth of 460 MHz (818–1278 MHz), wide impedance bandwidth of 54.6% (630–1103 MHz), and a measured peak gain of 4.0 dBi. The proposed antenna is a good candidate for compact universal UHF RFID handheld reader applications (840–960 MHz).

Sign in / Sign up

Export Citation Format

Share Document