A new compact and wideband CPW-fed sleeve antenna

2020 ◽  
Vol 12 (6) ◽  
pp. 513-518
Author(s):  
Peyman Hasani ◽  
Seyed Mohammad Hashemi ◽  
Javad Ghalibafan
Keyword(s):  
High Efficiency ◽  
Low Cost ◽  
Coplanar Waveguide ◽  
Equivalent Circuit Model ◽  
Good Choice ◽  
Design Parameters ◽  
Impedance Bandwidth ◽  
Frequency Bands ◽  
Compact Size ◽  
Metallic Cylinder

AbstractIn this article, a sleeve antenna with a wide impedance bandwidth that consists of a coplanar waveguide line connected to a metallic cylinder is presented. The effect of design parameters on the impedance bandwidth is considered by some simulations. In addition to the wide impedance bandwidth, the omnidirectional pattern, high efficiency, low cost and easy fabrication process, and compact dimensions cause this antenna to be a good choice for some applications at low VHF/UHF frequency bands. Due to the flexible structure of this antenna, it is possible to cover the various frequency bands by changing the parameters of the antenna. In this work a typical model of the proposed antenna for the frequency range of 127 to 586 MHz is fabricated and compared with other previous works. An equivalent circuit model has been proposed to better understand how the antenna works. The proposed antenna has a bandwidth of about 128.7% for a voltage standing wave ratio (VSWR) of less than 3, compact size of 0.274λ × 0.047λ and higher than 90% efficiency.

A compact CPW-fed monopole antenna for multi-band application

2021 ◽  
pp. 1-7
Author(s):  
YunYan Zhou ◽  
NianShun Zhao ◽  
RenXia Ning ◽  
Jie Bao
Keyword(s):  
Mobile Communications ◽  
Radio Frequency Identification ◽  
Communication Systems ◽  
Satellite Communication ◽  
Coplanar Waveguide ◽  
Dielectric Substrate ◽  
Monopole Antenna ◽  
Radiation Characteristics ◽  
Frequency Bands ◽  
Compact Size

Abstract A compact coplanar waveguide-fed monopole antenna is presented in this paper. The proposed antenna is composed of three monopole branches. In order to achieve the miniaturization, the longest branch was bent. The antenna is printed on an FR4 dielectric substrate, having a compact size of 0.144λ0 × 0.105λ0 × 0.003λ0 at its lowest resonant frequency of 900 MHz. The multiband antenna covers five frequency bands: 820–990 MHz, 1.87–2.08 GHz, 2.37–2.93 GHz, 3.98–4.27 GHz, and 5.47–8.9 GHz, which covers the entire radio frequency identification bands (860–960 MHz, 2.4–2.48 GHz, and 5.725–5.875 GHz), Global System for Mobile Communications (GSM) bands (890–960 MHz and 1.850–1.990 GHz), WLAN bands (2.4–2.484 GHz and 5.725–5.825 GHz), WiMAX band (2.5–2.69 GHz), X-band satellite communication systems (7.25–7.75 GHz and 7.9–8.4 GHz), and sub 6 GHz in 5G mobile communication system (3.3–4.2 GHz and 4.4–5.0 GHz). Also, the antenna has good radiation characteristics in the operating band, which is nearly omnidirectional. Both the simulated and experimental results are presented and compared and a good agreement is established. The proposed antenna operates in five frequency bands with high gain and good radiation characteristics, which make it a suitable candidate in terminal devices with multiple communication standards.

UWB MIMO antenna with common radiator

2016 ◽  
Vol 9 (3) ◽  
pp. 573-580 ◽  
Author(s):  
Garima Srivastava ◽  
B. K. Kanuijia ◽  
Rajeev Paulus
Keyword(s):  
Low Cost ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Rectangular Slot ◽  
Mimo Antenna ◽  
Circular Patch ◽  
Capacity Loss ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output

A compact printed 2 × 2 ultrawideband (UWB) multiple input multiple output (MIMO) antenna with a single circular patch as a common radiator for both the antenna elements is presented in this paper. A single circular patch is excited by two tapered CPW feeds for dual polarization. To improve the isolation between two ports, a rectangular slot of dimension L1 × W1 is created in the radiator. The UWB MIMO antenna has impedance bandwidth of 3–12 GHz with a isolation better than 17 dB between the two ports. The envelope correlation coefficient and the capacity loss are evaluated to ensure the good diversity performance of UWB MIMO antenna. The antenna has a compact size of 45 × 45 mm2 and is fabricated on low cost FR4 substrate and measured using Agilent VNA. The simulated and measured results show that the proposed UWB antenna is good candidate for UWB MIMO applications.

scholarly journals A Jug-Shaped CPW-Fed Ultra-Wideband Printed Monopole Antenna for Wireless Communications Networks

2022 ◽  
Vol 12 (2) ◽  
pp. 821
Author(s):  
Sarosh Ahmad ◽  
Umer Ijaz ◽  
Salman Naseer ◽  
Adnan Ghaffar ◽  
Muhammad Awais Qasim ◽  
...  
Keyword(s):  
Wireless Communication ◽  
Low Cost ◽  
Coplanar Waveguide ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Uwb Antenna ◽  
Compact Size ◽  
Parametric Studies ◽  
Printed Monopole Antenna ◽  
Printed Monopole

A type of telecommunication technology called an ultra-wideband (UWB) is used to provide a typical solution for short-range wireless communication due to large bandwidth and low power consumption in transmission and reception. Printed monopole antennas are considered as a preferred platform for implementing this technology because of its alluring characteristics such as light weight, low cost, ease of fabrication, integration capability with other systems, etc. Therefore, a compact-sized ultra-wideband (UWB) printed monopole antenna with improved gain and efficiency is presented in this article. Computer simulation technology microwave studio (CSTMWS) software is used to build and analyze the proposed antenna design technique. This broadband printed monopole antenna contains a jug-shaped radiator fed by a coplanar waveguide (CPW) technique. The designed UWB antenna is fabricated on a low-cost FR-4 substrate with relative permittivity of 4.3, loss tangent of 0.025, and a standard height of 1.6 mm, sized at 25 mm × 22 mm × 1.6 mm, suitable for wireless communication system. The designed UWB antenna works with maximum gain (peak gain of 4.1 dB) across the whole UWB spectrum of 3–11 GHz. The results are simulated, measured, and debated in detail. Different parametric studies based on numerical simulations are involved to arrive at the optimal design through monitoring the effects of adding cuts on the performance of the proposed antennas. Therefore, these parametric studies are optimized to achieve maximum antenna bandwidth with relatively best gain. The proposed patch antenna shape is like a jug with a handle that offers greater bandwidth, good gain, higher efficiency, and compact size.

scholarly journals Active meta polarizer for terahertz frequencies

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Hang Wong ◽  
Kai Xu Wang ◽  
Laure Huitema ◽  
Aurelian Crunteanu
Keyword(s):  
High Speed ◽  
Phase Change Materials ◽  
High Efficiency ◽  
Low Cost ◽  
Single Layer ◽  
Intense Laser ◽  
Laser Source ◽  
Terahertz Waves ◽  
Compact Size ◽  
Thz Waves

Abstract Active meta polarizers based on phase-change materials have recently led to emerging developments in terahertz devices and systems for imaging, security, and high-speed communications. Existing technologies of adaptive control of meta polarizers are limited to the complexity of external stimuli. Here, we introduce an active terahertz polarizer consisting of a single layer of large array patterns of vanadium dioxide material integrated with metallic patch matrix to dynamically reconfigure the polarization of the terahertz waves. The proposed active polarizer is simple in structure and can independently manipulate the polarization of the incident THz waves in two orthogonal directions. In addition, the device can also be performing as a highly efficient reflector at the same frequencies. We demonstrate that efficient and fast polarization changes of THz waves can be achieved over a wide operating bandwidth. Compared with other active polarizers using mechanical, optical and thermal controls, it can be conveniently manipulated with DC bias without any external actuators, intense laser source or heater. Therefore, with the advantages of high efficiency, compact size, low loss, low cost and fast response, the proposed polarizer can be highly integrative and practical to operate within adaptive terahertz circuits and systems.

Low-cost and compact 3D circularly polarized Microstrip antenna with high efficiency and wide beamwidth

2017 ◽  
Vol 9 (7) ◽  
pp. 1533-1540 ◽  
Author(s):  
Xi Chen ◽  
Zhen Wei ◽  
Dan Wu ◽  
Long Yang ◽  
Guang Fu
Keyword(s):  
Microstrip Antenna ◽  
Printed Circuit Boards ◽  
High Efficiency ◽  
Low Cost ◽  
3D Structure ◽  
Three Dimensional ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Circuit Boards ◽  
Circularly Polarized

A compact three-dimensional (3D) circularly polarized (CP) microstrip antenna is presented in this paper. The antenna adopts three low-cost printed circuit boards to form an integrated and closed 3D structure, and the radiation patch and the feed patches are etched on the surface of that. A crossed slot is cut on the radiation patch to miniaturize the antenna, and triangular feed patches are introduced to increase the bandwidths. In addition, because of the utilization of a low-loss series feed line, the antenna has a high efficiency of more than 95%. A prototype of the antenna is measured to validate the method. The dimensions of the antenna is 0.064λ × 0.36λ (λ is the wavelength in free space at 1.2 GHz). The results indicate that the impedance bandwidth for voltage standing wave ratio ≤ 2 reaches 23%, and the bandwidth for axial ratio (AR) ≤ 3 dB reaches 10.1%. In the overlap band, the gains are > 4.5dBic. Additionally, the 3 dB beamwidth is more than 114°, and the beamwidth for AR ≤ 3 dB is more than 131° at 1.2 GHz.

scholarly journals A Novel Compact CP Antenna with Wide Axial Ratio Bandwidth for Worldwide UHF RFID Handheld Reader

2019 ◽  
Vol 2019 ◽  
pp. 1-9 ◽  
Author(s):  
Waleed Abdelrahim Ahmed ◽  
Feng Quanyuan
Keyword(s):  
Radio Frequency Identification ◽  
Low Cost ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Axial Ratio ◽  
Plane Layer ◽  
Impedance Bandwidth ◽  
Uhf Rfid ◽  
Frequency Identification ◽  
The Right

This study presents a novel compact circularly polarized antenna for universal ultrahigh-frequency (UHF) radio-frequency identification (RFID) handheld reader applications. The antenna is composed of a coplanar waveguide (CPW) L-shaped feedline mounted at the right edge of the square slot at the bottom of the ground plane to realize a circular polarization; a horizontal stub protruded from the right side of the square slot towards the slot centre, and a vertical stub is mounted at the lower left of the square slot. The designed antenna printed on one ground plane layer of a low-cost FR4 substrate with an overall size of 120×120×1.6 mm3. The measurement results show indicate that the fabricated antenna achieves a wide axial ratio (AR) bandwidth of 460 MHz (818–1278 MHz), wide impedance bandwidth of 54.6% (630–1103 MHz), and a measured peak gain of 4.0 dBi. The proposed antenna is a good candidate for compact universal UHF RFID handheld reader applications (840–960 MHz).

scholarly journals Design and Analysis of Wideband Flexible Self-Isolating MIMO Antennas for Sub-6 GHz 5G and WLAN Smartphone Terminals

Electronics ◽  
2021 ◽  
Vol 10 (23) ◽  
pp. 3031
Author(s):  
Jayshri Kulkarni ◽  
Abdullah G. Alharbi ◽  
Arpan Desai ◽  
Chow-Yen-Desmond Sim ◽  
Ajay Poddar
Keyword(s):  
Common Ground ◽  
High Efficiency ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Potential Candidate ◽  
Mimo Antenna ◽  
Mimo Antennas ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output

A single radiator that is a part of four-port diversity Multiple-Input Multiple-Output (MIMO) antenna design is composed of four octagonal rings embedded between the two opposite sides of a T-shaped conductive layer surrounded by inverted angular edge cut L-shaped and E-shaped structures. The radiators are placed at the four corners with common ground at the center of a smartphone to form a four-element mobile MIMO antenna. The printing of the antenna is carried out on the flexible polyamide substrate (dielectric constant = 3.5 and loss tangent = 0.0027) with dimensions of 70 × 145 × 0.2 mm3. A wide impedance bandwidth of (84.12%) 2.39 to 5.86 GHz is achieved for all four radiators. The compact size of the radiators along with their placement enables the proposed MIMO antenna to occupy much less area while preserving the space for 2G/3G/4G antennas. The placement of the antennas results in self-isolation between antenna elements by achieving isolation greater than 17.5 dB in the desired operating bands. Furthermore, besides showing a high efficiency of 85% and adequate gain above 4 dBi, good diversity performances such as Envelope Correlation Coefficient (ECC) of less than 0.05, Diversity Gain (DG) of above 9.8 dB, Mean Effective Gain (MEG) of −3.1 dB, Channel Capacity of 21.50 bps/Hz, and Total Active Reflection Coefficient (TARC) of below −10 dB are achieved by the flexible MIMO smartphone antenna. The effect of bending along the X and Y-axis on the performance of the proposed MIMO antenna is also analyzed where decent performance is observed. This makes the proposed flexible four-element MIMO antenna a potential candidate to be deployed in future smartphones.

Broadband CPW-Fed Circularly Polarized Square Slot Antenna for Universal UHF RFID Handheld Reader

2021 ◽  
Vol 36 (6) ◽  
pp. 747-754
Author(s):  
Rui Ma ◽  
Quanyuan Feng
Keyword(s):  
Low Cost ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Polarization Characteristic ◽  
Dielectric Substrate ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Uhf Rfid ◽  
Circularly Polarized

This paper presents a new coplanar waveguide (CPW)-fed circularly polarized square slot antenna (CPSSA). The proposed antenna uses an inverted Z-shaped feedline protruded from the signal line of the feeding CPW. Circularly polarized (CP) radiation can be achieved by adequately inserting the arc-shaped grounded strip into the upper right corner of the square slot. The widened vertical tuning stub on the L-shaped grounded strip can improve impedance matching and axial ratio (AR) performance. The measured results indicate that the 10 dB impedance bandwidth is 620 MHz (652-1272 MHz), and the 3 dB axial ratio bandwidth is 320 MHz (840-1160 MHz), which has a broadband characteristic. In the range of the universal UHF RFID band, the measured peak gain is about 4.4 dBi. The proposed CPSSA uses low-cost FR4 material as the dielectric substrate. The overall size of the antenna is 119 × 119 × 0.5 mm3. The proposed antenna has a simple structure, easy processing, good performance, wide operating bandwidth, and dual circular polarization characteristic. It can be applied to the universal UHF RFID handheld reader environment.

scholarly journals Ultra-Wideband Low-Cost High-Efficiency Cavity-Backed Compound Spiral Antenna

Electronics ◽  
2020 ◽  
Vol 9 (9) ◽  
pp. 1399
Author(s):  
Charl Baard ◽  
Yulang Liu ◽  
Natalia Nikolova
Keyword(s):  
Time Domain ◽  
High Efficiency ◽  
Low Cost ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Competitive Performance ◽  
Spiral Antenna ◽  
Archimedean Spiral ◽  
Backward Radiation ◽  
Equiangular Spiral

A low-cost high-efficiency ultra-wideband (UWB) cavity-backed spiral antenna is proposed. It employs an equiangular spiral enclosed by an Archimedean spiral and it is fed through a tapered microstrip balun. A center-raised cylindrical absorber-free cavity backs the spiral to minimize the backward radiation without decreasing the efficiency. The cavity is designed to ensure an impedance bandwidth exceeding 16:1 ratio (from 350 MHz to 5.5 GHz). Simulated and measured results are presented and compared, demonstrating competitive performance in terms of impedance bandwidth and efficiency. Time–domain measurements indicate fidelity of 0.62 at boresight.

Study on a New Array of Oscillating Wave Energy Converter

2014 ◽  
Vol 672-674 ◽  
pp. 432-435 ◽  
Author(s):  
Meng Shao ◽  
Hong Da Shi ◽  
Fei Fei Cao ◽  
Kai Zhu ◽  
Zheng Quan Zhang ◽  
...  
Keyword(s):  
Wave Energy ◽  
High Efficiency ◽  
High Reliability ◽  
Low Cost ◽  
Wave Energy Converter ◽  
Design Parameters ◽  
New Wave ◽  
Energy Converter ◽  
On Demand ◽  
Converter Unit

The paper presents a new array of oscillating wave energy converter, which is in accordance with nowadays’ research tendency of China: high power, high efficiency, high reliability and low cost. The paper gives the design scheme and design parameters of the new wave energy converter. It's composed of the wave energy converter unit, which can be assembled to arrays based on demand. Besides, the paper analyzes the power generation principle and advantages of the device. The research results could be a reference for wave energy’s exploration and utilization.

Sign in / Sign up

Export Citation Format

Share Document