scholarly journals Taphonomy of Paleogene and Neogene vertebrate assemblages

1992 ◽  
Vol 6 ◽  
pp. 19-19
Author(s):  
William S. Bartels ◽  
Thomas M. Bown ◽  
Catherine Badgley ◽  
Anna Kay Behrensmeyer ◽  
Michele Morgan ◽  
...  

The Paleogene of Wyoming and Montana and the Neogene Siwaliks of Pakistan contain deposits representing a wide variety of terrestrial environments. Although fossils are preserved in all of these environments, fossil vertebrates are abundant in only certain facies. These principal preservational environments vary within and, particularly, between formations in each region.The Bighorn and Crazy Mountain basins of Wyoming and Montana contain abundant remains of Paleocene and Eocene vertebrates. Over 1800 localities in this region have been established in the Paleocene Fort Union and Paleocene to Eocene Willwood formations. The distribution of vertebrate remains changes dramatically upsection in this sequence. The Fort Union consists of thick fluvial sandstones and minor swampy floodplain mudstones in the lower part, and more widely separated channel sandstones interbedded with better drained floodplain deposits that include paleosol horizons in the upper part. These changes reflect a local increase in aggradation rate. Vertebrates are preserved almost exclusively in channel mud-clast conglomerates in the lower part of the formation, but appear in a wider variety of environments (channels, splays, swamps, and paleosols) in the upper part. The Willwood Formation continues the changes evident in the upper Fort Union. With increased aggradation rates, floodplain deposits became thicker and more well drained. Except for rare occurrences in other environments (channels, a variety of calcareous environments, and oxbows), fossils are recovered primarily from paleosol horizons developed in fine grained floodplain deposits.The Fort Union channel deposits contain assemblages that are often highly biased samples of faunal composition with large aquatic taxa well represented and small terrestrial forms unevenly represented. The upper Fort Union and Willwood floodplain paleosols contain more homogeneous (and therefore comparable) assemblages. These paleosols differ systematically, however, in terms of soil maturity and vertebrate composition, and they are commonly biased against large or aquatic taxa.The distribution of Siwalik vertebrate localities among sedimentary environments is known for four formations spanning early middle to late Miocene: Kamlial, Chinji, Nagri, and Dhok Pathan. The principal deposits in which fossils occur are: major stream channel complexes, secondary (floodplain) channels, crevasse splays, and floodplains. The Kamlial and Nagri formations, dominated by coarse lithologies (>50% sandstone), are notably less productive of fossil localities than the Chinji and Dhok Pathan formations, dominated by fine grained lithologies (>50% mudstone). In the Kamlial and Nagri formations, major channel complexes form the most prevalent environment, and more localities are associated with these channels than with any other environment. In the Chinji and Dhok Pathan formations, the most prevalent environment is floodplain, but more localities are associated with the secondary channels on these floodplains than with any other environment. In the Chinji Formation, most localities developed in secondary channels occur in fining-upward fill sequences, whereas in the Dhok Pathan Formation, most sites in these channels occur in their lag deposits. In these more productive formations, the abundance of certain mammalian taxa is correlated with specific depositional environments. Change upsection in the abundance of these taxa could result largely from change in facies productivity.The taphonomy of the two areas is similar in that channel lag deposits are an important source of fossil vertebrates. The major difference is that the Rocky Mountain Paleogene contains fewer, but highly productive, environments that changed significantly through time, including the Eocene emergence of floodplain paleosols as the primary environment of vertebrate preservation.

2013 ◽  
Vol 40 (4) ◽  
pp. 283-293 ◽  
Author(s):  
Patrick Schielein ◽  
Johanna Lomax

Abstract This study investigates the potential of luminescence to date deposits from different fluvial sedimentary environments; namely point bar deposits, sandy and silty channel fills and floodplain sediments. Samples were taken from Holocene (<5 ka) terraces of the Lech and Danube rivers, for which independent age constraint is available through 14C ages, archaeological data and historical maps. OSL-ages were obtained using small aliquots of coarse grain quartz for the majority of samples. Two further samples were dated by the IRSL-signals of polymineral fine grain extracts, as no sufficient number of coarse grains could be extracted from these sediments. In order to detect and ac-count for incomplete bleaching, we used the decision process suggested by Bailey and Arnold [Statistical modelling of single grain quartz De distributions and an assessment of procedures for estimating burial dose. Quaternary Science Reviews 25, 2475–2502, 2006]. Although their model was designed for single grains of quartz, our study shows that it is also applicable to multiple grains of quartz, pro-vided that a low number of luminescent grains is present on one aliquot. Luminescence ages of point bar deposits and a sandy channel fill correspond most closely to the independent age control. In the floodplain, sand-striped floodplain channel deposits were incompletely bleached to a moderate degree, yielding ages with acceptable overestimations, while fine-grained floodplain deposits were worst bleached. One crevasse splay deposit was so severely incompletely bleached that none of the age models was able to yield accurate ages.


2021 ◽  
Vol 93 (1) ◽  
pp. 31-51
Author(s):  
Maarit Saresma ◽  
◽  
Emilia Kosonen ◽  
Antti E. K. Ojala ◽  
Anu Kaskela ◽  
...  

The capital region of Finland is growing rapidly and into areas with challenging con­struction conditions such as deep fine-grained sediments. In the coastal city of Espoo, present land use is mainly focused in the southern and central parts, which were submerged by the Baltic Sea during the early and mid-Holocene. These areas have experienced saline and brackish water phases during the history of the Baltic Sea Basin. The deposition environments of the presently studied onshore areas are an analogue for the present day offshore Baltic Sea sedimentation settings for fine-grained material. The results from Baltic Sea studies have demonstrated that the seabed topography has a significant role in the deposition of sediments and their properties. In this study, paleotopographic models were created for the ancient Baltic Sea Basin in the Espoo area 1) after deglaciation and 2) during the Litorina transgression and classified into bathymetric (terrain) zones and structures. Topographic classification was combined with the water depth of the Litorina stage, the thickness of fine-grained deposits and wind fetch to establish the overall characteristics of sedimentary environments in the coastal area. Fine-grained sediments can be found mainly in depressions that are classified here as broad, narrow or local. The study found the most challenging environments for construction purposes in sheltered narrow depressions that contain thick layers of fine-grained sediments deposited during the Litorina transgression. These are mainly located in the southern and central parts of Espoo. Minor deep canyons were also found in the northern parts of Espoo. This study provides new prior knowledge for urban planning and construction design in Espoo. The methodology could be applied to other Baltic Sea coastal cities and areas with fine-grained sediments.


2017 ◽  
Vol 7 (1) ◽  
pp. 35
Author(s):  
Paul Gustave Fowe Kwetche ◽  
Marie Joseph Ntamak-Nida ◽  
Adrien Lamire Djomeni Nitcheu ◽  
Jacques Etame ◽  
François Mvondo Owono ◽  
...  

Missole facies description and sequence stratigraphy analysis allow a new proposal of depositional environments of the Douala sub-basin eastern part. The sediments of Missole outcrops (N’kapa Formation) correspond to fluvial/tidal channel to shallow shelf deposits with in some place embayment deposits within a warm and semi-arid climate. Integrated sedimentologic, palynologic and mineralogical data document a comprehensive sequence stratigraphy of this part of the Douala sub-basin. Five facies associations occur: (1) facies association I is characterized by Floodplain deposits; (2) facies association II is Fluvial to mouth bar deposits; (3) facies association III characterise Shallow Shelf deposits; (4) facies association IV represents Distal bay or Lacustrine déposits; and (5) Facies association V is made of Fluvial channel deposits. Six depositional sequences were identified. These sequences are composed of four progradational sequences and two retrogradational sequences containing a fluvial channel portion represented by lag deposits at the base of retrogradational sequences. These deposits represent the outset of the relative sea level rise period. In the study area, the N’kapa Formation is composed of non-marine/coastal aggradational deposits representing the early stage of the regressive period. The occurrence of the estuarine/bay deposits with paleosols development is interpreted as evidence of climate change with significant relative base level fluctuation. The study of key minerals associated to sequence stratigraphy as well as palynology demonstrated that sequence architecture has been controlled mostly by climate evolution and outcrops are dated Paleocene – early Eocene.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yousif M. Makeen ◽  
Xuanlong Shan ◽  
Mutari Lawal ◽  
Habeeb A. Ayinla ◽  
Siyuan Su ◽  
...  

AbstractThe Abu Gabra and Bentiu formations are widely distributed within the interior Muglad Basin. Recently, much attention has been paid to study, evaluate and characterize the Abu Gabra Formation as a proven reservoir in Muglad Basin. However, few studies have been documented on the Bentiu Formation which is the main oil/gas reservoir within the basin. Therefore, 33 core samples of the Great Moga and Keyi oilfields (NE Muglad Basin) were selected to characterize the Bentiu Formation reservoir using sedimentological and petrophysical analyses. The aim of the study is to de-risk exploration activities and improve success rate. Compositional and textural analyses revealed two main facies groups: coarse to-medium grained sandstone (braided channel deposits) and fine grained sandstone (floodplain and crevasse splay channel deposits). The coarse to-medium grained sandstone has porosity and permeability values within the range of 19.6% to 32.0% and 1825.6 mD to 8358.0 mD respectively. On the other hand, the fine grained clay-rich facies displays poor reservoir quality as indicated by porosity and permeability ranging from 1.0 to 6.0% and 2.5 to 10.0 mD respectively. A number of varied processes were identified controlling the reservoir quality of the studies samples. Porosity and permeability were enhanced by the dissolution of feldspars and micas, while presence of detrital clays, kaolinite precipitation, iron oxides precipitation, siderite, quartz overgrowths and pyrite cement played negative role on the reservoir quality. Intensity of the observed quartz overgrowth increases with burial depth. At great depths, a variability in grain contact types are recorded suggesting conditions of moderate to-high compactions. Furthermore, scanning electron microscopy revealed presence of micropores which have the tendency of affecting the fluid flow properties in the Bentiu Formation sandstone. These evidences indicate that the Bentiu Formation petroleum reservoir quality is primarily inhibited by grain size, total clay content, compaction and cementation. Thus, special attention should be paid to these inhibiting factors to reduce risk in petroleum exploration within the area.


2020 ◽  
Vol 30 (1) ◽  
pp. 18-32 ◽  
Author(s):  
Piotr Maciaszek ◽  
Lilianna Chomiak ◽  
Paweł Urbański ◽  
Marek Widera

AbstractThe present study focuses on the upper Neogene deposits, called the “Poznań Clays”, that cover more than 75,000 km2 of Poland. They are situated between the first mid- Polish lignite seam and the glaciogenic deposits of the Pleistocene age. Lithostratigraphically, the “Poznań Clays” belong to the uppermost portion of the lignite-bearing Grey Clays Member and the whole Wielkopolska Member (Poznań Formation). The examined fine-grained sediments include mud-rich floodplain deposits with palaeosol remnants and large sandy-muddy or muddy palaeochannel bodies. Therefore, taking into account facies analysis, cross-sectional geometry, and the planform of the palaeochannels, it can be stated that the “Poznań Clays” formed in the environment of a late Neogene anastomosing river.


1988 ◽  
Vol 3 ◽  
pp. 1-13 ◽  
Author(s):  
Scott L. Wing

Plants can become incorporated into the sediments of virtually any environment, from the oozes of abyssal plains to the silts and sands of delta fronts to brecciated mudflows of volcanic origin. However there is a much narrower range of sedimentary environments in which identifiable plant remains are found in abundance. Generally speaking these are the very shallow or subaerial portions of deltas and estuaries, the channels and floodplains of fluvial systems, lakes of all sizes, ash-falls, and mass-flow deposits such as mudflows. For the purposes of this paper peat swamps are considered as unusual subtypes of deltaic and fluvial environments in which clastic input is low relative to organic accumulation.


2005 ◽  
Vol 45 (1) ◽  
pp. 581 ◽  
Author(s):  
T. Bernecker ◽  
A.D. Partridge

In the Gippsland Basin, the seaward extent of paralic coal occurrences can be mapped in successive time slices through the Paleocene and Eocene to provide a series of straight to gently arcuate surrogate palaeoshorelines within the petroliferous Latrobe Group. Palaeogeographic reconstructions that incorporate this information provide a unique perspective on the changes affecting a siliciclastic depositional system on a passive continental margin where basin development has been primarily controlled by thermal sag. In contrast, the absence of calcareous marine fossils and lack of extensive, widespread and thick fine-grained sediments on the marine shelf and continental slope, beyond the seaward limits of coal accumulation, have contributed to the false impression that the Latrobe Group accumulated in a largely non-marine basin. Based on the proposed model for palaeoshoreline delineation, seismic data, sequence analysis, petrography and palynology can be integrated to subdivide the main depositional environments into distinct facies associations that can be used to predict the distribution of petroleum systems elements in the basin. The application of such palaeogeographic models to the older section of the Latrobe Group can improve the identification of these petroleum systems elements in as yet unexplored parts of the Gippsland Basin. Given the recent attention paid to the basin as a CO2 storage province, palaeogeographic interpretations may be able to assist with the selection of appropriate injection sites.


2017 ◽  
Vol 9 (1) ◽  
Author(s):  
Christopher Baiyegunhi ◽  
Kuiwu Liu ◽  
Oswald Gwavava

AbstractGrain size analysis is a vital sedimentological tool used to unravel the hydrodynamic conditions, mode of transportation and deposition of detrital sediments. In this study, detailed grain-size analysis was carried out on thirty-five sandstone samples from the Ecca Group in the Eastern Cape Province of South Africa. Grain-size statistical parameters, bivariate analysis, linear discriminate functions, Passega diagrams and log-probability curves were used to reveal the depositional processes, sedimentation mechanisms, hydrodynamic energy conditions and to discriminate different depositional environments. The grain-size parameters show that most of the sandstones are very fine to fine grained, moderately well sorted, mostly near-symmetrical and mesokurtic in nature. The abundance of very fine to fine grained sandstones indicate the dominance of low energy environment. The bivariate plots show that the samples are mostly grouped, except for the Prince Albert samples that show scattered trend, which is due to the either mixture of two modes in equal proportion in bimodal sediments or good sorting in unimodal sediments. The linear discriminant function analysis is dominantly indicative of turbidity current deposits under shallow marine environments for samples from the Prince Albert, Collingham and Ripon Formations, while those samples from the Fort Brown Formation are lacustrine or deltaic deposits. The C-M plots indicated that the sediments were deposited mainly by suspension and saltation, and graded suspension. Visher diagrams show that saltation is the major process of transportation, followed by suspension.


Author(s):  
R. L. Stevens ◽  
M. S. Rosenbaum ◽  
L. G. Hellgren

AbstractThis paper relates the Engineering features of fine-grained clays in the Göteborg area to their glacial sources, depositional settings and postdepositional changes. These deposits occupy valley and coastal areas where urban expansion has been concentrated, despite the considerable problems with settlement and quick-clay behaviour. Both mineralogical and permeability trends are largely determined by the textural characteristics of the deposits. The depositional environments, which have largely controlled the textural trends, are known to have evolved during late Weichselian times due to glacial retreat, isostatic land uplift and climatic changes. A generalized lithostratigraphical model has been produced and this is used here to help understand and predict the variability of the geotechnical properties. The stratigraphical trends in texture, mineralogy and structure are considered within four broad genetic categories: 1) coarse-grained glacial deposits, 2) glaciomarine deposits, 3) very distal glaciomarine deposits, and 4) shallow-marine deposits. These divisions can often be recognized within the logs of geotechnical reports, which suggested that they could provide the basis for development of three-dimensional models which have both geological and geotechnical predictive power within the vicinity of Göteborg. They could also act as a guide for the development of similar models in urban areas elsewhere.


2013 ◽  
Vol 50 (3) ◽  
pp. 235-248 ◽  
Author(s):  
Ruth A. Stockey ◽  
Georgia L. Hoffman ◽  
Gar W. Rothwell

In addition to having a rich assemblage of mammalian fossils, the Gao Mine locality in the Paskapoo Formation of south-central Alberta has yielded numerous plant specimens of late Paleocene (late Tiffanian or Ti5) age. The plant fossils are preserved in siltstones and fine-grained sandstones interpreted as overbank sediments that were deposited on an aggrading floodplain. The assemblage is dominated by the cupressaceous conifer Metasequoia foxii and the cercidiphyllaceous dicot Joffrea speirsiae, including their well-preserved seedlings. The flora also contains foliage of the ferns Onoclea and Speirseopteris and the woody dicots Palaeocarpinus, Aphananthe/Celtis, Aesculus, Beringiaphyllum, ?Trochodendron, and Wardiaphyllum, as well as seedlings of unknown dicotyledonous angiosperms. Metasequoia foxii and Speirseopteris are unique to the floras of Gao Mine and the nearby Munce’s Hill site (Tiffanian Ti4). The remainder of the taxa are common in late Paleocene floras of North Dakota, Montana, and Wyoming, all USA. The floras of the nearby Joffre Bridge Roadcut and Blindman River sites (both Tiffanian Ti3) are more diverse, but both of those sites encompass a wider range of depositional environments and may include higher percentages of allochthonous material. Most of the Gao Mine material is autochthonous. The seedlings were buried in place, along with the surrounding leaf litter, preserving a record of the local plant community.


Sign in / Sign up

Export Citation Format

Share Document