Folding of Polymer Chains in the Early Stage of Crystallization

Glassy carbon has been prepared in the shape of disk and fibre by direct pyrolysis of a phenolic resin. Carbonization studies indicate that the unique structure of the final glassy carbon is a direct consequence of the production of very stable aromatic ribbon molecules by the coalescence of phenolic polymer chains at an early stage of pyrolysis. It is shown that molecular orientation induced in the initial polymer before pyrolysis is 'memorized’ to some extent after carbonization. Molecular orientation imposed in this type of carbon is not an intrinsic structural feature, but a physical characteristic which can be varied by the formation process or by extension at high temperatures; there is no essential structural difference apart from preferred orientation between polymeric units or microfibrils in well-oriented carbon fibres and isotropic glassy carbon. High resolution electron microscopy confirms this directly. We thus identify a new class of ‘polymeric carbons’, that consist of intertwined microfibrils comprising stacks of narrow graphitic ribbons. The fibrils are held together with covalent interfibrillar links of strength lower than that in the ribbons themselves. A ribbon structure has been proposed previously by Ruland (1971) for the specific case of high modulus carbon fibre. The structure is elaborated and extended here to cover all polymeric carbons and the steps in its development during carbonization are decisively detailed.

Download Full-text

Singularity Transition in Biosystem with Infinite Number of Conserved Links with Surroundings

System Analysis & Mathematical Modeling ◽

10.17150/2713-1734.2021.3(4).270-278 ◽

2021 ◽

Vol 3 (4) ◽

pp. 270-278

Author(s):

Andrei Moldavanov

Keyword(s):

Infinite Number ◽

Transition Point ◽

Early Stage ◽

Polymer Chains ◽

Subsequent Stage ◽

Natural Evolution ◽

Separate Species ◽

Cooperative Effects ◽

Singularity Point ◽

Complex Polymer

Stages of natural evolution such as biogenesis and abiogenesis are the well-recognized terms to characterize the very different phases of life development. Traditionally, an abiogenesis is believed as the early stage of evolution that is mainly the chemistry phase dealing with intercoupling between the complex polymer chains when manifestations of life assumes substantial participation of cooperative effects. It its turn, a biogenesis as the subsequent stage of evolution is the period for prevalence of Darwin’s laws showing, in particular, in battle among separate species in the way of variability-heredity contest. In this article, we discuss possible nature of the transition between above stages as a normal result of progress in an evolutionary system simulated by mathematical model of open system with infinite number of conserved links with system surroundings. It is shown that the biosystem, in transition point experiences the deep reconstruction in existing pattern of energy exchange which leads to emergence of the more complicated and advanced stage of evolution. Our study showed that the found transition point can be considered as a singularity point in system evolution. In its turn, the evolution stages with the dissimilar meaning are the physical placeholders for stage of abiogenesis and biogenesis in natural evolution, correspondingly.

Download Full-text

Alterations in the number of motoneurons containing immunoreactive calcitonin gene-related peptide(CGRP)& choline acetyltransferase(ChAT) in the cervical spinal cord of the wobbler mouse during the development of the motoneuron disease

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100141226 ◽

1995 ◽

Vol 53 ◽

pp. 970-971

Author(s):

L. Vacca-Galloway ◽

Y.Q. Zhang ◽

P. Bose ◽

S.H. Zhang

Keyword(s):

Spinal Cord ◽

Early Stage ◽

Cervical Spinal Cord ◽

Wild Type Mouse ◽

Reflex Response ◽

Mouse Strains ◽

Behavioral Tests ◽

Wobbler Mouse ◽

Stage 4 ◽

Stage 1

The Wobbler mouse (wr) has been studied as a model for inherited human motoneuron diseases (MNDs). Using behavioral tests for forelimb power, walking, climbing, and the “clasp-like reflex” response, the progress of the MND can be categorized into early (Stage 1, age 21 days) and late (Stage 4, age 3 months) stages. Age-and sex-matched normal phenotype littermates (NFR/wr) were used as controls (Stage 0), as well as mice from two related wild-type mouse strains: NFR/N and a C57BI/6N. Using behavioral tests, we also detected pre-symptomatic Wobblers at postnatal ages 7 and 14 days. The mice were anesthetized and perfusion-fixed for immunocytochemical (ICC) of CGRP and ChAT in the spinal cord (C3 to C5).Using computerized morphomety (Vidas, Zeiss), the numbers of IR-CGRP labelled motoneurons were significantly lower in 14 day old Wobbler specimens compared with the controls (Fig. 1). The same trend was observed at 21 days (Stage 1) and 3 months (Stage 4). The IR-CGRP-containing motoneurons in the Wobbler specimens declined progressively with age.

Download Full-text

Automated high-resolution microscopy: the approaches so far

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100125312 ◽

1987 ◽

Vol 45 ◽

pp. 58-61

Author(s):

W. O. Saxton

Keyword(s):

High Resolution ◽

Early Stage ◽

Automatic Recording ◽

Microprocessor Control ◽

Alternative Systems ◽

Electron Image ◽

Complete Automation ◽

Analysis System ◽

High Resolution Microscopy

Recent commercial microscopes with internal microprocessor control of all major functions have already demonstrated some of the benefits anticipated from such systems, such as continuous magnification, rotation-free diffraction and magnification, automatic recording of mutually registered focal series, and fewer control knobs. Complete automation of the focusing, stigmating and alignment of a high resolution microscope, allowing focal series to be recorded at preselected focus values as well, is still imminent rather than accomplished, however; some kind of image pick-up and analysis system, fed with the electron image via a TV camera, is clearly essential for this, but several alternative systems and algorithms are still being explored. This paper reviews the options critically in turn, and stresses the need to consider alignment and focusing at an early stage, and not merely as an optional extension to a basic proposal.

Download Full-text

Direct observation of Fe-Al-Zn ternary intermetallic compound and its transformation during the early stage of hot-dip galvanizing

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100151416 ◽

1993 ◽

Vol 51 ◽

pp. 1116-1117

Author(s):

C. S. Lin ◽

W. A. Chiou ◽

M. Meshii

Keyword(s):

Intermetallic Compound ◽

Reaction Rate ◽

Diffusion Rate ◽

Early Stage ◽

Zinc Bath ◽

Steel Sheets ◽

Direct Observations ◽

Solid Iron ◽

Iron And Zinc ◽

Ternary Intermetallic Compound

The galvannealed steel sheets have received ever increased attention because of their excellent post-painting corrosion resistance and good weldability. However, its powdering and flaking tendency during press forming processes strongly impairs its performance. In order to optimize the properties of galvanneal coatings, it is critical to control the reaction rate between solid iron and molten zinc.In commercial galvannealing line, aluminum is added to zinc bath to retard the diffusion rate between iron and zinc by the formation of a thin layer of Al intermetallic compound on the surface of steel at initial hot-dip galvanizing. However, the form of this compound and its transformation are still speculated. In this paper, we report the direct observations of this compound and its transformation.The specimens were prepared in a hot-dip simulator in which the steel was galvanized in the zinc bath containing 0.14 wt% of Al at a temperature of 480 °C for 5 seconds and was quenched by liquid nitrogen.

Download Full-text

Anisotropy of interfacial defects in the initial stage of MOVPE GaAs growth On Si

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100176095 ◽

1990 ◽

Vol 48 (4) ◽

pp. 592-593

Author(s):

C. Vannuffel ◽

C. Schiller ◽

J. P. Chevalier

Keyword(s):

Early Stage ◽

Threading Dislocations ◽

Mbe Growth ◽

Detailed Mechanism ◽

Si Substrates ◽

Initial Stage ◽

Interfacial Defects ◽

Interfacial Dislocations ◽

Step Growth ◽

Essential Problem

Recently, interest has focused on the epitaxy of GaAs on Si as a promising material for electronic applications, potentially for integration of optoelectronic devices on silicon wafers. The essential problem concerns the 4% misfit between the two materials, and this must be accommodated by a network of interfacial dislocations with the lowest number of threading dislocations. It is thus important to understand the detailed mechanism of the formation of this network, in order to eventually reduce the dislocation density at the top of the layers.MOVPE growth is carried out on slightly misoriented, (3.5°) from (001) towards , Si substrates. Here we report on the effect of this misorientation on the interfacial defects, at a very early stage of growth. Only the first stage, of the well-known two step growth process, is thus considered. Previously, we showed that full substrate coverage occured for GaAs thicknesses of 5 nm in contrast to MBE growth, where substantially greater thicknesses are required.

Download Full-text