The Densities of Heavy Water Liquid and Saturated Vapor at Elevated Temperatures

NPCIL uses stainless steel AISI 403 grade material extensively for very critical nuclear components. A very special application of this material is for manufacturing END FITTING BODY of COOLANT CHANNEL ASSEMBLIES of Pressurized Heavy Water Reactor (PHWR) of Nuclear Power Plants. Presently, two types of PHWR Nuclear Plants viz 220 MWe and 540 MWe are under operation in India. Next higher rating viz 700 MWe PHWR Nuclear Plants are at various stages of construction and due for commissioning in near future. There are number of Pressure Tubes in PHWR Nuclear Plants wherein fuel is loaded and are called coolant channel assemblies. End fitting bodies are assembled on either end of PRESSURE TUBES of coolant channel assembly. The Coolant (Heavy water) flows inside these assemblies and collects the heat produced during nuclear reaction in pressure tubes. This heat is utilized to produce Steam in Steam Generators. After giving up heat in Steam Generator, coolant returns to pressure tube and cycle continues. Material for End Fittings has been selected keeping in mind the mechanical properties at room and at elevated temperatures are compatible with mating component which are manufactured using Zircaloy and SS 410. It is also an essential that coefficient of thermal expansion is also compatible for mating material. Indigenization of the material for manufacturing of End Fittings with short delivery period has always been a challenge for commercial Nuclear Reactors. Inspection of these types of critical nuclear reactor components becomes critical due to the high safety standards and complexity in structures. There are very few manufacturers for this material in India. NPCIL took up a challenge for developing a new supplier in Northern Region of India for developing this material. A leading company in northern region of INDIA came forward and took up the challenge and succeeded for this venture. This paper deals with development of vender to manufacture of AISI 403 grade material by melting, refining ( ESR process), forging, heat treatment, testing & provide the guidelines to tackle the issue faced during this developmental work.

Download Full-text

Critical Explosible Oxygen Concentration of Methanol-Saturated Vapor/O2/N2 Mixtures at Elevated Temperatures and Pressures

Industrial & Engineering Chemistry Research ◽

10.1021/ie402502j ◽

2014 ◽

Vol 53 (13) ◽

pp. 5617-5621 ◽

Cited By ~ 9

Author(s):

Xueling Liu ◽

Ying Huang ◽

Yue Wang ◽

Qi Zhang

Keyword(s):

Oxygen Concentration ◽

Elevated Temperatures ◽

Saturated Vapor

Download Full-text

Characterization of Rare-Earth Fluoride Anti-Stokes Phosphors by Scanning arid Transmission Electron Microscopy

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100064761 ◽

1971 ◽

Vol 29 ◽

pp. 142-143

Author(s):

N. M. P. Low ◽

L. E. Brosselard

Keyword(s):

Electron Microscopy ◽

Rare Earth ◽

Elevated Temperatures ◽

Stoichiometric Composition ◽

Rare Earth Ions ◽

Crystalline Solid ◽

Precipitation Process ◽

Rare Earth Fluoride ◽

Earth Fluoride ◽

Rare Earth Fluorides

There has been considerable interest over the past several years in materials capable of converting infrared radiation to visible light by means of sequential excitation in two or more steps. Several rare-earth trifluorides (LaF3, YF3, GdF3, and LuF3) containing a small amount of other trivalent rare-earth ions (Yb3+ and Er3+, or Ho3+, or Tm3+) have been found to exhibit such phenomenon. The methods of preparation of these rare-earth fluorides in the crystalline solid form generally involve a co-precipitation process and a subsequent solid state reaction at elevated temperatures. This investigation was undertaken to examine the morphological features of both the precipitated and the thermally treated fluoride powders by both transmission and scanning electron microscopy.Rare-earth oxides of stoichiometric composition were dissolved in nitric acid and the mixed rare-earth fluoride was then coprecipitated out as fine granules by the addition of excess hydrofluoric acid. The precipitated rare-earth fluorides were washed with water, separated from the aqueous solution, and oven-dried.

Download Full-text

Observations oh Nucleation and Growth of Voids in Nickel

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100069065 ◽

1970 ◽

Vol 28 ◽

pp. 414-415

Author(s):

J. L. Brimhall ◽

H. E. Kissinger ◽

B. Mastel

Keyword(s):

High Purity ◽

Growth Stage ◽

Elevated Temperatures ◽

Early Growth ◽

Nucleation And Growth ◽

Pure Nickel ◽

Different Temperatures ◽

Total Fluence ◽

Neutron Exposure ◽

Growth Of Voids

Some information on the size and density of voids that develop in several high purity metals and alloys during irradiation with neutrons at elevated temperatures has been reported as a function of irradiation parameters. An area of particular interest is the nucleation and early growth stage of voids. It is the purpose of this paper to describe the microstructure in high purity nickel after irradiation to a very low but constant neutron exposure at three different temperatures.Annealed specimens of 99-997% pure nickel in the form of foils 75μ thick were irradiated in a capsule to a total fluence of 2.2 × 1019 n/cm2 (E > 1.0 MeV). The capsule consisted of three temperature zones maintained by heaters and monitored by thermocouples at 350, 400, and 450°C, respectively. The temperature was automatically dropped to 60°C while the reactor was down.

Download Full-text

Voids in Irradiated Tungsten and Molybdenum

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100062865 ◽

1969 ◽

Vol 27 ◽

pp. 190-191

Author(s):

Robert C. Rau ◽

Robert L. Ladd

Keyword(s):

Melting Point ◽

Fast Neutron ◽

Neutron Irradiation ◽

Elevated Temperatures ◽

Irradiation Temperature ◽

The Body ◽

Face Centered Cubic ◽

Body Centered Cubic ◽

Cubic Metals ◽

Face Centered

Recent studies have shown the presence of voids in several face-centered cubic metals after neutron irradiation at elevated temperatures. These voids were found when the irradiation temperature was above 0.3 Tm where Tm is the absolute melting point, and were ascribed to the agglomeration of lattice vacancies resulting from fast neutron generated displacement cascades. The present paper reports the existence of similar voids in the body-centered cubic metals tungsten and molybdenum.

Download Full-text

Mechanical Properties and Dislocation Structure of Single Crystal Cdte Deformed in Compression at 300°C

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010009292x ◽

1976 ◽

Vol 34 ◽

pp. 592-593

Author(s):

Ernest L. Hall ◽

J. B. Vander Sande

Keyword(s):

Mechanical Properties ◽

Single Crystal ◽

Dislocation Structure ◽

Room Temperature ◽

Elevated Temperatures ◽

Strain Curve ◽

Optical Devices ◽

Semiconductor Compound ◽

Wide Range ◽

Sample Orientation

The present paper describes research on the mechanical properties and related dislocation structure of CdTe, a II-VI semiconductor compound with a wide range of uses in electrical and optical devices. At room temperature CdTe exhibits little plasticity and at the same time relatively low strength and hardness. The mechanical behavior of CdTe was examined at elevated temperatures with the goal of understanding plastic flow in this material and eventually improving the room temperature properties. Several samples of single crystal CdTe of identical size and crystallographic orientation were deformed in compression at 300°C to various levels of total strain. A resolved shear stress vs. compressive glide strain curve (Figure la) was derived from the results of the tests and the knowledge of the sample orientation.

Download Full-text

Electron microscopy of crystalline structure in thermotropic random copolymers

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100089585 ◽

1991 ◽

Vol 49 ◽

pp. 1054-1055

Author(s):

Afzana Anwer ◽

S. Eilidh Bedford ◽

Richard J. Spontak ◽

Alan H. Windle

Keyword(s):

Electron Microscopy ◽

Crystalline Structure ◽

Liquid Crystalline ◽

Elevated Temperatures ◽

Random Copolymers ◽

Molecular Characteristics ◽

Scanning Calorimetry ◽

X Ray ◽

Identical Monomer ◽

Periodic Layer

Random copolyesters composed of wholly aromatic monomers such as p-oxybenzoate (B) and 2,6-oxynaphthoate (N) are known to exhibit liquid crystalline characteristics at elevated temperatures and over a broad composition range. Previous studies employing techniques such as X-ray diffractometry (XRD) and differential scanning calorimetry (DSC) have conclusively proven that these thermotropic copolymers can possess a significant crystalline fraction, depending on molecular characteristics and processing history, despite the fact that the copolymer chains possess random intramolecular sequencing. Consequently, the nature of the crystalline structure that develops when these materials are processed in their mesophases and subsequently annealed has recently received considerable attention. A model that has been consistent with all experimental observations involves the Non-Periodic Layer (NPL) crystallite, which occurs when identical monomer sequences enter into register between adjacent chains. The objective of this work is to employ electron microscopy to identify and characterize these crystallites.

Download Full-text

Generation of 4H and 6H Structures During the Hexagonal-Rhombohedral Transformation in Dy2Co17

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100113810 ◽

1975 ◽

Vol 33 ◽

pp. 38-39

Author(s):

C. W. Allen ◽

D. L. Kuruzar

Keyword(s):

Elevated Temperatures ◽

Layer Structure ◽

Transition Element ◽

Temperature Structure ◽

Allotropic Transformation ◽

Layer Plane ◽

Planar Defects ◽

Topologically Close Packed ◽

Transformation Mechanisms ◽

Shear Transformation

The rare earth/transition element intermetallics R2T17 are essentially topologically close packed phases for which layer structure models have already been presented. Many of these compounds are known to undergo allotropic transformation of the type at elevated temperatures. It is not unexpected that shear transformation mechanisms are involved in view of the layering character of the structures. The transformations are evidently quite sluggish, illustrated in furnace cooled Dy2Co17 by the fact that only rarely has the low temperature rhombohedral form been seen. The more usual structures observed so far in furnace cooled alloys include 4H and 6H in Dy2Co17 (Figs. 1 and 2) . In any event it is quite clear that the general microstructure is very complicated as a consequence of the allotropy, illustrated in Fig. 3. Numerous planar defects in the layer plane orientation are evident as are non-layer plane defects inherited from a high temperature structure.

Download Full-text