scholarly journals Structure-dynamics relationships in cryogenically deformed bulk metallic glass

2022 ◽  
Vol 13 (1) ◽  
Author(s):  
Florian Spieckermann ◽  
Daniel Şopu ◽  
Viktor Soprunyuk ◽  
Michael B. Kerber ◽  
Jozef Bednarčík ◽  
...  

AbstractThe atomistic mechanisms occurring during the processes of aging and rejuvenation in glassy materials involve very small structural rearrangements that are extremely difficult to capture experimentally. Here we use in-situ X-ray diffraction to investigate the structural rearrangements during annealing from 77 K up to the crystallization temperature in Cu44Zr44Al8Hf2Co2 bulk metallic glass rejuvenated by high pressure torsion performed at cryogenic temperatures and at room temperature. Using a measure of the configurational entropy calculated from the X-ray pair correlation function, the structural footprint of the deformation-induced rejuvenation in bulk metallic glass is revealed. With synchrotron radiation, temperature and time resolutions comparable to calorimetric experiments are possible. This opens hitherto unavailable experimental possibilities allowing to unambiguously correlate changes in atomic configuration and structure to calorimetrically observed signals and can attribute those to changes of the dynamic and vibrational relaxations (α-, β- and γ-transition) in glassy materials. The results suggest that the structural footprint of the β-transition is related to entropic relaxation with characteristics of a first-order transition. Dynamic mechanical analysis data shows that in the range of the β-transition, non-reversible structural rearrangements are preferentially activated. The low-temperature γ-transition is mostly triggering reversible deformations and shows a change of slope in the entropic footprint suggesting second-order characteristics.

2019 ◽  
Vol 58 (1) ◽  
pp. 304-312
Author(s):  
Ádám Révész ◽  
András Horváth ◽  
Gábor Ribárik ◽  
Erhard Schafler ◽  
David J. Browne ◽  
...  

Abstract Bulk metallic glass of Cu60Zr20Ti20 composition has been synthesized by copper mold casting. Slices of the as-cast glass has been subjected to severe plastic deformation by high-pressure torsion for different whole turns. The microstructure and the thermal behavior of the deformed disks have been investigated by X-ray diffraction and differential scanning calorimetry. It was confirmed that the initial compression preceding the high pressure torsion induces crystallized structure, which shows only minor further changes upon the severe plastic shear deformation achieved by twisting the sample. The X-ray line profiles have been evaluated by the Convolutional Whole Profile Fitting algorithm in order to determine the evolution of the microstructural parameters, such as the median and variance of the crystallite size distribution, average crystallite size and dislocation density as a function of the number of revolutions. Hardness measurements by nanoindentation have also been carried out on the as-cast alloys and the deformed disks.


2008 ◽  
Vol 23 (12) ◽  
pp. 3409-3414 ◽  
Author(s):  
Zsolt Kovács ◽  
Erhard Schafler ◽  
Ádám Révész

Commercial Zr44Ti11Cu10Ni10Be25 bulk metallic glass (Vitreloy 1b) disk was subjected to extreme plastic deformation by high-pressure torsion at room temperature. Two-dimensional mapping by high-intensity synchrotron x-ray diffraction in the plane of the shear deformation reveals no evidence of nanocrystallization; however, average effective volume changes as a function of the deformation can be evaluated.


Author(s):  
Vasily Astanin ◽  
Dmitry Gunderov ◽  
Zhi Qiang Ren ◽  
Ruslan Valiev ◽  
Jing Tao Wang

2005 ◽  
Vol 20 (6) ◽  
pp. 1396-1403 ◽  
Author(s):  
C.Y. Tam ◽  
C.H. Shek

The oxidation kinetics of Cu60Zr30Ti10 bulk metallic glass and its crystalline counterpart were studied in oxygen environment over the temperature range of 573–773 K. The oxidation kinetics, measured with thermogravimetric analysis, of the metallic glass follows a linear rate law between 573 and 653 K and a parabolic rate law between 673 and 733 K. It was also found that the oxidation activation energy of metallic glass is lower than that of its crystalline counterpart. The x-ray diffraction pattern showed that the oxide layer is composed of Cu2O, CuO, ZrO2, and metallic Cu. Cu enrichment on the topmost oxide layer of the metallic glass oxidized at 573 K was revealed by x-ray photoelectron spectroscopy while there was a decrease in Cu content in the innermost oxide layer. The oxide surface morphologies observed from scanning electron microscopy showed that ZrO2 granules formed at low temperatures while whiskerlike copper oxides formed at higher temperatures.


2007 ◽  
pp. 1983-1987
Author(s):  
E. Miura ◽  
Gene E. Ice ◽  
E.D. Specht ◽  
J.W.L. Pang ◽  
Hidemi Kato ◽  
...  

2018 ◽  
Vol 385 ◽  
pp. 319-324 ◽  
Author(s):  
Evgeniy Boltynjuk ◽  
Evgeniy Ubyivovk ◽  
Dmitriy Gunderov ◽  
Vladimir Mikhalovskii ◽  
Ruslan Z. Valiev

The Zr62Cu22Al10Fe5Dy1 bulk metallic glass was subjected to high pressure torsion (HPT) processing at temperatures of 20 and 150°C. Structural studies were carried out by TEM on the lamella-sample prepared from the HPT-specimens in transversal direction to the specimen plane. TEM studies revealed formation of multiple shear bands with spacings in a 20-50 nm range for both HPT states. Shear bands could be divided in two types: primary and secondary bands. The morphology of shear bands strongly depends on the processing temperature. Shear bands are distributed homogeneously throughout the whole lamella-sample for state processed by HPT at temperature of 20°C. Regions with shear bands are divided by amorphous regions on lamella-sample cut from the sample processed by HPT at temperature of 150°C. Analysis of optical microscopy and SEM data showed that shear bands are distributed throughout the whole volume of HPT-specimens.


2007 ◽  
Vol 22 (7) ◽  
pp. 1849-1858 ◽  
Author(s):  
Kwang Seok Lee ◽  
Jürgen Eckert ◽  
Hyun-Joon Jun ◽  
Young Won Chang

The influence of annealing on the structural changes and the mechanical properties of Zr41.2Ti13.8Cu12.5Ni10Be22.5 (Vit-1) bulk metallic glass was systematically studied by varying the annealing times at 703 K. The evolution of the structural state at a relatively high temperature within the supercooled liquid region was studied by thermal analysis, x-ray diffraction, high-resolution transmission electron microscopy, extended x-ray absorption fine structure, and dilatometric measurements. The deformation behavior and the mechanical properties were also examined by carrying out hardness and compression tests for the specimens annealed for various times.


2011 ◽  
Vol 23 (25) ◽  
pp. 254204 ◽  
Author(s):  
J Bednarcik ◽  
S Michalik ◽  
M Sikorski ◽  
C Curfs ◽  
X D Wang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document