Magnetic polymer nanocomposite-supported Pd: an efficient and reusable catalyst for the Heck and Suzuki reactions in water

2015 ◽  
Vol 39 (3) ◽  
pp. 2052-2059 ◽  
Author(s):  
Dongfang Wang ◽  
Wendong Liu ◽  
Fengling Bian ◽  
Wei Yu

Pd supported on magnetic polymer nanocomposites serves as an efficient and recyclable catalyst for the water-phase Heck and Suzuki reactions.

Molecules ◽  
2021 ◽  
Vol 26 (10) ◽  
pp. 2942
Author(s):  
Bhausaheb V. Tawade ◽  
Ikeoluwa E. Apata ◽  
Nihar Pradhan ◽  
Alamgir Karim ◽  
Dharmaraj Raghavan

The synthesis of polymer-grafted nanoparticles (PGNPs) or hairy nanoparticles (HNPs) by tethering of polymer chains to the surface of nanoparticles is an important technique to obtain nanostructured hybrid materials that have been widely used in the formulation of advanced polymer nanocomposites. Ceramic-based polymer nanocomposites integrate key attributes of polymer and ceramic nanomaterial to improve the dielectric properties such as breakdown strength, energy density and dielectric loss. This review describes the ”grafting from” and ”grafting to” approaches commonly adopted to graft polymer chains on NPs pertaining to nano-dielectrics. The article also covers various surface initiated controlled radical polymerization techniques, along with templated approaches for grafting of polymer chains onto SiO2, TiO2, BaTiO3, and Al2O3 nanomaterials. As a look towards applications, an outlook on high-performance polymer nanocomposite capacitors for the design of high energy density pulsed power thin-film capacitors is also presented.


Membranes ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 139
Author(s):  
Oluranti Agboola ◽  
Ojo Sunday Isaac Fayomi ◽  
Ayoola Ayodeji ◽  
Augustine Omoniyi Ayeni ◽  
Edith E. Alagbe ◽  
...  

Globally, environmental challenges have been recognised as a matter of concern. Among these challenges are the reduced availability and quality of drinking water, and greenhouse gases that give rise to change in climate by entrapping heat, which result in respirational illness from smog and air pollution. Globally, the rate of demand for the use of freshwater has outgrown the rate of population increase; as the rapid growth in town and cities place a huge pressure on neighbouring water resources. Besides, the rapid growth in anthropogenic activities, such as the generation of energy and its conveyance, release carbon dioxide and other greenhouse gases, warming the planet. Polymer nanocomposite has played a significant role in finding solutions to current environmental problems. It has found interest due to its high potential for the reduction of gas emission, and elimination of pollutants, heavy metals, dyes, and oil in wastewater. The revolution of integrating developed novel nanomaterials such as nanoparticles, carbon nanotubes, nanofibers and activated carbon, in polymers, have instigated revitalizing and favourable inventive nanotechnologies for the treatment of wastewater and gas separation. This review discusses the effective employment of polymer nanocomposites for environmental utilizations. Polymer nanocomposite membranes for wastewater treatment and gas separation were reviewed together with their mechanisms. The use of polymer nanocomposites as an adsorbent for toxic metals ions removal and an adsorbent for dye removal were also discussed, together with the mechanism of the adsorption process. Patents in the utilization of innovative polymeric nanocomposite membranes for environmental utilizations were discussed.


2009 ◽  
Vol 74 (16) ◽  
pp. 6283-6286 ◽  
Author(s):  
Jun-Fa Wei ◽  
Jiao Jiao ◽  
Jin-Juan Feng ◽  
Jing Lv ◽  
Xi-Ru Zhang ◽  
...  

2014 ◽  
Vol 53 (49) ◽  
pp. 19094-19103 ◽  
Author(s):  
Florica Papa ◽  
Ioan Balint ◽  
Catalin Negrila ◽  
Elena-Alina Olaru ◽  
Irina Zgura ◽  
...  

2018 ◽  
Vol 42 (6) ◽  
pp. 4748-4756 ◽  
Author(s):  
Rong Ma ◽  
Pengbo Yang ◽  
Fengling Bian

A novel catalyst Fe3O4@SiO2-Dendrimer-Pd based on palladium immobilized on magnetic dendritic polymer nanocomposites was successfully synthesized and characterized by FT-IR, EA, XRD, TEM, EDX, VSM and XPS.


2018 ◽  
Vol 8 (9) ◽  
pp. 1452 ◽  
Author(s):  
Ilaria Armentano ◽  
Matteo Gigli ◽  
Francesco Morena ◽  
Chiara Argentati ◽  
Luigi Torre ◽  
...  

In the last decade, biopolymer matrices reinforced with nanofillers have attracted great research efforts thanks to the synergistic characteristics derived from the combination of these two components. In this framework, this review focuses on the fundamental principles and recent progress in the field of aliphatic polyester-based nanocomposites for regenerative medicine applications. Traditional and emerging polymer nanocomposites are described in terms of polymer matrix properties and synthesis methods, used nanofillers, and nanocomposite processing and properties. Special attention has been paid to the most recent nanocomposite systems developed by combining alternative copolymerization strategies with specific nanoparticles. Thermal, electrical, biodegradation, and surface properties have been illustrated and correlated with the nanoparticle kind, content, and shape. Finally, cell-polymer (nanocomposite) interactions have been described by reviewing analysis methodologies such as primary and stem cell viability, adhesion, morphology, and differentiation processes.


Author(s):  
Reza Moheimani ◽  
M Hasansade

This paper describes a closed-form unit cell micromechanical model for estimating the effective thermal conductivities of unidirectional carbon nanotube reinforced polymer nanocomposites. The model incorporates the typically observed misalignment and curvature of carbon nanotubes into the polymer nanocomposites. Also, the interfacial thermal resistance between the carbon nanotube and the polymer matrix is considered in the nanocomposite simulation. The micromechanics model is seen to produce reasonable agreement with available experimental data for the effective thermal conductivities of polymer nanocomposites reinforced with different carbon nanotube volume fractions. The results indicate that the thermal conductivities are strongly dependent on the waviness wherein, even a slight change in the carbon nanotube curvature can induce a prominent change in the polymer nanocomposite thermal conducting behavior. In general, the carbon nanotube curvature improves the nanocomposite thermal conductivity in the transverse direction. However, using the straight carbon nanotubes leads to maximum levels of axial thermal conductivities. With the increase in carbon nanotube diameter, an enhancement in nanocomposite transverse thermal conductivity is observed. Also, the results of micromechanical simulation show that it is necessary to form a perfectly bonded interface if the full potential of carbon nanotube reinforcement is to be realized.


2021 ◽  
Vol 13 ◽  
Author(s):  
S. K. Parida

: This presented review article is constructed to be an extensive source for polymer nanocomposite researchers covering the relation of structure with property, manufacturing techniques, and potential applications when a small number of nanosized particles are added to a host polymer matrix. The exceptional structural, mechanical, and electrical properties of polymer nanocomposites after the addition of inorganic solid nanoparticles are elucidated by the large surface area of doped nanoparticles that interact with host polymer matrices. Due to the generation of ideas, the conventional methods of preparation of polymer nanocomposites are made more interesting. Hence, this brief review presents a sketch of different synthesis techniques, characterization, applications, and safety concerns for polymer nanocomposites.


RSC Advances ◽  
2015 ◽  
Vol 5 (26) ◽  
pp. 20098-20107 ◽  
Author(s):  
Hojat Veisi ◽  
Abbas Amini Manesh ◽  
Neda Eivazi ◽  
Ali Reza Faraji

The synthesis and application of SBA-15/1,3-DCG/Pd as a novel heterogeneous and reusable nano catalyst in Suzuki reactions was described.


Author(s):  
A Abbasi ◽  
M Mondali

In this study, thermo-mechanical properties of CNT/polymer nanocomposite were investigated. Semi-continuum analytical method was used to simulate thermal behavior of CNT-reinforced polymers. CNT was modeled in an atomistic scale, whereas polymer was modeled as a continuum. Interfacial effects or the Van Der Waals interactions between matrix and CNT were simulated employing cohesive strength. The results indicate that using the cohesive law for CNT/polymer interface could provide very close results to the available experimental data. Also, adding a small quantity of CNTs to polymer leads to a slight decrease in the radial and axial thermal expansion coefficients of polymer matrix depending on temperature, volume fraction, aspect ratio, and also diameter of CNTs.


Sign in / Sign up

Export Citation Format

Share Document