Simplified reaction kinetics, models and experiments for glyphosate degradation in water by the UV/H2O2process

2015 ◽  
Vol 14 (2) ◽  
pp. 366-377 ◽  
Author(s):  
Eduardo Vidal ◽  
Antonio Negro ◽  
Alberto Cassano ◽  
Cristina Zalazar

This work reports the degradation kinetics of glyphosate in water employing the UV/H2O2process. The kinetic model was experimentally validated. Results compare the kinetics of the herbicide alone and a commercial formulation.

Author(s):  
Adnan Bozdoğan ◽  
Kurban Yaşar

This research was performed to elucidate the effects of temperature on the degradation kinetics of anthocyanins in shalgam beverage. Shalgam beverage was produced according to traditional production method. Then, it was kept at three different temperatures (65°C, 75°C, and 85°C) for 12 hours, and the relevant quantities of anthocyanins were determined thereafter. The research revealed that degradation of the anthocyanins was well described with a 1st-order reaction kinetics model and the R2 values varied in the range of 0.9059-0.9715. Activation energy of the reaction was determined to be 48537 Joule/mole. The half-lives of anthocyanins at 65°C and 75° C, and 85°C were found to be 138.63, 136.72, and 51.57, respectively. Compared the half-life periods at different temperatures, anthocyanins were found to be more resistant at 65°C and 75°C than at 85°C.


2021 ◽  
Author(s):  
Dario Balaban ◽  
◽  
Jelena Lubura ◽  
Predrag Kojić ◽  
Jelena Pavličević ◽  
...  

Rubber vulcanization is kinetically a complex process, since it consists of two simultaneous reactions: curing and degradation. To determine reaction kinetics, it is necessary to determine a kinetic model which describes the process adequately. Proposed kinetic model has six adjustable parameters. In order to determine kinetic parameters of the proposed kinetic model, commercially available rubber gum was used. Oscillating disc rheometer was used to investigate experimental dependence of torque on time, at six temperatures in the range from 130 to 180 °C, with a step of 10 °C. Matlab application, built via App Designer feature, was developed in order to fit the experimental data to the proposed kinetic model. Developed Matlab application, consisting of two tabs, enables user to upload raw rheometer data, perform manual fitting or automatic fitting (manual or automatic estimation of initial values of adjustable parameters), test the effect of constant values of some kinetic parameters on the overall quality of fit, visualize the dependence of kinetic parameters on temperature and to determine the values of Arrhenius expression for curing and degradation process. Both fitting methods were proven to be efficient; overall determination coefficient and MAPE value for automatic and manual fitting methods were >0.99 and <1%, and >0.999 and <1%, respectively. Arrhenius parameters were also determined with high accuracy (R2>0.98). Developed application enables simple and efficient determination of kinetic parameters by means of different fitting methods, simultaneous fitting of data on all temperatures, and testing the effect of constant kinetic parameters values on fitting results


Antibiotics ◽  
2019 ◽  
Vol 8 (1) ◽  
pp. 6 ◽  
Author(s):  
David Gómez-Ríos ◽  
Howard Ramírez-Malule ◽  
Peter Neubauer ◽  
Stefan Junne ◽  
Rigoberto Ríos-Estepa

Clavulanic acid (CA) is a β-lactam antibiotic inhibitor of β-lactamase enzymes, which confers resistance to bacteria against several antibiotics. CA is produced in submerged cultures by the filamentous Gram-positive bacterium Streptomyces clavuligerus; yield and downstream process are compromised by a degradation phenomenon, which is not yet completely elucidated. In this contribution, a study of degradation kinetics of CA at low temperatures (−80, −20, 4, and 25 °C) and pH 6.8 in chemically-defined fermentation broths is presented. Samples of CA in the fermentation broths showed a fast decline of concentration during the first 5 h followed by a slower, but stable, reaction rate in the subsequent hours. A reversible-irreversible kinetic model was applied to explain the degradation rate of CA, its dependence on temperature and concentration. Kinetic parameters for the equilibrium and irreversible reactions were calculated and the proposed kinetic model was validated with experimental data of CA degradation ranging 16.3 mg/L to 127.0 mg/L. Degradation of the chromophore CA-imidazole, which is commonly used for quantifications by High Performance Liquid Chromatography, was also studied at 4 °C and 25 °C, showing a rapid rate of degradation according to irreversible first-order kinetics. A hydrolysis reaction mechanism is proposed as the cause of CA-imidazole loss in aqueous solutions.


2020 ◽  
Vol 4 (1) ◽  
pp. 8 ◽  
Author(s):  
Rainer Wendel ◽  
Philipp Rosenberg ◽  
Michael Wilhelm ◽  
Frank Henning

The reaction kinetics of anionic polymerization for the production of anionic polyamide 6 (aPA6) are widely understood. It is also known that this reaction is very sensitive to external influences such as water. This paper analyzes and quantifies the influence of water on the reaction of ε-caprolactam to anionic polyamide 6. A kinetic model is developed in which the reactive molecules of the activator and catalyst are defined as variables and the concentrations of activator and catalyst as well as water content are considered. A model for the calculation of the reaction kinetics is established and validated with experimental data. The developed model can be used to predict the influence and compensation of water by addition of surplus activator and catalyst during the polymerization of ε-caprolactam.


2012 ◽  
Vol 14 (2) ◽  
pp. 42-48 ◽  
Author(s):  
Dongfang Zhang

Heterogeneous photocatalytic removal and reaction kinetics of Rhodamine-B dye with Au loaded TiO2 nanohybrid catalysts Heterogeneous photocatalytic removal of Rhodamine-B (RhB) dye by metallic Au nanopatrticles deposited TiO2 photocatalyst was studied. For this study, a chemical reduction method by hydrazine hydrate for gold deposition was employed in order to synthesize Au/TiO2 nanocomposite system. For the characterization of the synthesized nanomaterials, X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-vis diffuse reflectance spectroscopy (DRS), the Fourier transformation infrared spectroscopy (FTIR) and photoluminescence spectroscopy (PLS) techniques were performed. The obtained results show that the deposition of gold onto TiO2 surface could effectively inhibit the recombination of the photoinduced electron and holes, improving the absorption capability for the visible light source and leading to the increased surface OH group density. The degradation experiment reveals that the efficiency of color removal from RhB aqueous solution containing Au/TiO2 powders for the photocatalytic bleaching of RhB dye is more efficient than that of bare TiO2 sample upon UV-vis light activation. In addition, degradation kinetics of RhB dye in aqueous suspensions can be well simulated by the Langmuir-Hinshelwood model and obeys the pseudo-first order law, with a decolorization rate of 0.0252 min-1 to the photocatalytic removal of RhB dye.


BMC Chemistry ◽  
2021 ◽  
Vol 15 (1) ◽  
Author(s):  
Adrienne L. Voelker ◽  
Lynne S. Taylor ◽  
Lisa J. Mauer

AbstractThiamine (vitamin B1) is an essential micronutrient in the human diet, found both naturally and as a fortification ingredient in many foods and supplements. However, it is susceptible to degradation due to heat, light, alkaline pH, and sulfites, among effects from other food matrix components, and its degradation has both nutritional and sensory implications as in foods. Thiamine storage stability in solution was monitored over time to determine the effect of solution pH and thiamine concentration on reaction kinetics of degradation without the use of buffers, which are known to affect thiamine stability independent of pH. The study directly compared thiamine stability in solutions prepared with different pHs (3 or 6), concentrations (1 or 20 mg/mL), and counterion in solution (NO3−, Cl−, or both), including both commercially available salt forms of thiamine (thiamine mononitrate and thiamine chloride hydrochloride). Solutions were stored at 25, 40, 60, and 80 °C for up to one year, and degradation was quantified by high-performance liquid chromatography (HPLC) over time, which was then used to calculate degradation kinetics. Thiamine was significantly more stable in pH 3 than in pH 6 solutions. In pH 6 solutions, stability was dependent on initial thiamine concentration, with the 20 mg/mL thiamine salt solutions having an increased reaction rate constant (kobs) compared to the 1 mg/mL solutions. In pH 3 solutions, kobs was not dependent on initial concentration, attributed to differences in degradation pathway dependent on pH. Activation energies of degradation (Ea) were higher in pH 3 solutions (21–27 kcal/mol) than in pH 6 solutions (18–21 kcal/mol), indicating a difference in stability and degradation pathway due to pH. The fundamental reaction kinetics of thiamine reported in this study provide a basis for understanding thiamine stability and therefore improving thiamine delivery in many foods containing both natural and fortified thiamine.


Sign in / Sign up

Export Citation Format

Share Document