Studies on application of fish waste for synthesis of high quality biodiesel

RSC Advances ◽  
2014 ◽  
Vol 4 (59) ◽  
pp. 31462-31468 ◽  
Author(s):  
Devarapaga Madhu ◽  
Bhaskar Singh ◽  
Yogesh C. Sharma
Keyword(s):  
Low Cost ◽  
Raw Material ◽  
High Quality ◽  
Fish Waste ◽  
Cirrhinus Mrigala

A low cost raw material obtained from the discarded parts of fish (Cirrhinus mrigala, Cirrhinus cirrhosa, Cirrhinus reba) was utilized as feedstock oil and catalyst for the synthesis of biodiesel.

Under High Pressure: Spherical Glass Flotation and Instrument Housings in Deep Ocean Research

2009 ◽  
Vol 43 (5) ◽  
pp. 105-109 ◽  
Author(s):  
Steffen Pausch ◽  
Detlef Below ◽  
Kevin Hardy
Keyword(s):  
High Pressure ◽  
Low Cost ◽  
Weight Ratio ◽  
Deep Ocean ◽  
The Other ◽  
Raw Material ◽  
Advanced Manufacturing Technology ◽  
Advanced Manufacturing ◽  
High Quality ◽  
Glass Spheres

AbstractAll stationary and autonomous instrumentation for observational activities in ocean research have two things in common, they need pressure-resistant housings and buoyancy to bring instruments safely back to the surface. The use of glass spheres is attractive in many ways. Glass qualities such as the immense strength‐weight ratio, corrosion resistance, and low cost make glass spheres ideal for both flotation and instrument housings. On the other hand, glass is brittle and hence subject to damage from impact. The production of glass spheres therefore requires high-quality raw material, advanced manufacturing technology and expertise in processing. VITROVEX® spheres made of DURAN® borosilicate glass 3.3 are the only commercially available 17-inch glass spheres with operational ratings to full ocean trench depth. They provide a low-cost option for specialized flotation and instrument housings.

TECHNOLOGICAL ASPECTS OF HIGH QUALITY RAW MATERIAL OBTAINING FOR PECTIN PRODUCTION

1970 ◽  
pp. 47-50
Author(s):  
I. A. Ilina ◽  
I. A. Machneva ◽  
E. S. Bakun
Keyword(s):  
Raw Materials ◽  
Thermal Characteristics ◽  
Environmental Safety ◽  
Raw Material ◽  
High Quality ◽  
Temperature Conductivity ◽  
Drying Temperature ◽  
Plant Raw Materials ◽  
Gel Forming Ability

  The article is devoted to the study of the chemical composition, physical and thermal-pfysical characteristics of damp apple pomaces and the identifying patterns of influence of drying temperature the functional composition and gel-forming ability of pectin. The research is aimed at obtaining initial data for the subsequent calculation of the main technological, hydro-mechanical, thermal, structural and economic characteristics of devices for drying the plant raw materials, ensuring the environmental safety and high quality of pectin-containing raw materials, the reducing heat and energy costs. As a result of the study of the thermal characteristics of apple pomaces, the critical points (temperature conductivity – 16.5 x 10-8 m2/s, thermal conductivity – 0.28 W/m K, heat capacity – 1627 j/(kg K)) at a humidity of 56 % are determined, which characterizing the transition from the extraction of weakly bound moisture to the extraction of moisture with strong bonds (colloidal, adsorption). It was found that the pomaces obtained from apples of late ripening have a higher content of solids (21-23 %), soluble pectin and protopectin (2.5-4.5 %). Dried pomaces obtained from apple varieties of late ripening contain up to 25 % pectin, which allow us to recommend them as a source of raw materials for the production of pectin. The optimum modes of preliminary washing of raw materials are offered, allowing to the remove the ballast substances as much as possible. It is established that when the drying temperature increases, the destructive processes are catalyzed: the strength of the pectin jelly and the uronide component and the degree of pectin esterification are reduced. The optimum drying temperature of damp apple pomaces is 80 0C, at which the quality of pectin extracted from the dried raw materials is maintained as much as possible. It is shown that the most effective for the pectin production is a fraction with a particle size of 3-5 mm, which allow us to extract up to 71 % of pectin from raw materials.

scholarly journals Urban Air Quality Modeling Using Low-Cost Sensor Network and Data Assimilation in the Aburrá Valley, Colombia

Atmosphere ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 91
Author(s):  
Santiago Lopez-Restrepo ◽  
Andres Yarce ◽  
Nicolás Pinel ◽  
O.L. Quintero ◽  
Arjo Segers ◽  
...  
Keyword(s):  
Air Quality ◽  
Data Assimilation ◽  
Transport Model ◽  
Cost Model ◽  
Low Cost ◽  
Model Performance ◽  
Monitoring Network ◽  
Correlation Factor ◽  
Chemical Transport Model ◽  
High Quality

The use of low air quality networks has been increasing in recent years to study urban pollution dynamics. Here we show the evaluation of the operational Aburrá Valley’s low-cost network against the official monitoring network. The results show that the PM2.5 low-cost measurements are very close to those observed by the official network. Additionally, the low-cost allows a higher spatial representation of the concentrations across the valley. We integrate low-cost observations with the chemical transport model Long Term Ozone Simulation-European Operational Smog (LOTOS-EUROS) using data assimilation. Two different configurations of the low-cost network were assimilated: using the whole low-cost network (255 sensors), and a high-quality selection using just the sensors with a correlation factor greater than 0.8 with respect to the official network (115 sensors). The official stations were also assimilated to compare the more dense low-cost network’s impact on the model performance. Both simulations assimilating the low-cost model outperform the model without assimilation and assimilating the official network. The capability to issue warnings for pollution events is also improved by assimilating the low-cost network with respect to the other simulations. Finally, the simulation using the high-quality configuration has lower error values than using the complete low-cost network, showing that it is essential to consider the quality and location and not just the total number of sensors. Our results suggest that with the current advance in low-cost sensors, it is possible to improve model performance with low-cost network data assimilation.

scholarly journals Linum usitatisimum L. is the most important crop in Russia for the production of high-quality oil with low cost (review)

2021 ◽  
Vol 640 (4) ◽  
pp. 042014
Author(s):  
E N Turin ◽  
A N Susskiy ◽  
R S Stukalov ◽  
M V Shestopalov ◽  
E L Turina ◽  
...  
Keyword(s):  
Low Cost ◽  
High Quality ◽  
Important Crop

scholarly journals Removal of Cadmium(II) from Water using Modified Citrus limettioides Peels: Thermodynamic and Isotherm Studies

2019 ◽  
Vol 32 (1) ◽  
pp. 73-78
Author(s):  
P. Janaki ◽  
R. Sudha ◽  
T.S. Sribharathi ◽  
P. Anitha ◽  
K. Poornima ◽  
...  
Keyword(s):  
Adsorption Process ◽  
Low Cost ◽  
Raw Material ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Adsorption Method ◽  
Chemically Modified ◽  
Adsorption Performance ◽  
Monolayer Adsorption ◽  
Isotherm Equations

The adsorption performance of sulphuric acid treated low cost adsorbent synthesized by using Citrus limettioides peel as an effective raw material for the removal of cadmium(II) from water. The batch adsorption method was carried out to optimize some parameters like contact time, pH and adsorbent dose. The nonlinear isotherm equations were used to calculate the different isotherm constant of five isotherm models namely Freundlich, Langmuir, Dubinin-Radushkevich, Redlich-Peterson and Sips. The Langmuir monolayer adsorption capacity of chemically modified Citrus limettioides peel was found to be 287.60 mg g-1. The negative values of ΔGº and ΔHº showed that the adsorption process is spontaneous and exothermic.

Feasibility of cereal straw for industrial utilization in Minnesota

2000 ◽  
Vol 15 (1) ◽  
pp. 2-8 ◽  
Author(s):  
N.C. Wagner ◽  
S. Ramaswamy ◽  
U. Tschirner
Keyword(s):  
Animal Feed ◽  
Raw Materials ◽  
Low Cost ◽  
Economic Feasibility ◽  
Raw Material ◽  
Cereal Straw ◽  
Industrial Utilization ◽  
Industrial Use ◽  
On Farm ◽  
And Storage

AbstractA pre-economic feasibility study was undertaken to determine the potential of cereal straw for industrial utilization in Minnesota. Specifically, utilizing straw for pulp and paper manufacture was of interest. The availability of cereal straw fiber supplies at various locations across the state of Minnesota, along with pre-processing issues such as transportation, harvesting, handling, and storage, are discussed and priced. The greatest economic advantage of straw for industrial use appears to be the low cost of the raw material compared to traditional raw materials. This also provides an excellent opportunity for additional income for farmers. The methodology and information provided here should be helpful in evaluating the feasibility of utilizing straw for other industrial purposes in other parts of the world. However, in some Third World countries, long-standing on-farm, traditional uses of cereal straws for fuel, fiber, and animal feed may limit their availability for industrial utilization.

Teledermatology Can Produce High-Quality Care at Low Cost

2003 ◽  
Vol 11 (4) ◽  
pp. 209-215 ◽  
Author(s):  
Keng Chen ◽  
Stephen Shumack ◽  
Richard Wootton
Keyword(s):  
Low Cost ◽  
Quality Care ◽  
High Quality ◽  
High Quality Care
Sign in / Sign up

Export Citation Format

Share Document