Selective dye adsorption and metal ion detection using multifunctional silsesquioxane-based tetraphenylethene-linked nanoporous polymers

2017 ◽  
Vol 5 (19) ◽  
pp. 9156-9162 ◽  
Author(s):  
Huanhuan Liu ◽  
Hongzhi Liu
Keyword(s):  
Porous Material ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Fluorescence Detection ◽  
Metal Ion ◽  
Selective Adsorption ◽  
Dye Adsorption ◽  
Dye Molecules ◽  
Nanoporous Polymers ◽  
Metal Ion Detection

A multifunctional hybrid porous material with a SBET of 1910 cm2 g−1 was prepared by the Friedel–Crafts reaction of octavinylsilsesquioxane (OVS) with tetraphenylethene (TPE). It exhibits highly selective adsorption for dye molecules and fluorescence detection for metal ions. A moderate CO2 adsorption capacity of 1.42 mmol g−1 at 273.0 K/101 kPa is also found for this material.

scholarly journals Detection of metal ions in biological systems: A review

2020 ◽  
Vol 39 (1) ◽  
pp. 231-246 ◽  
Author(s):  
Xian Zheng ◽  
Wenyu Cheng ◽  
Chendong Ji ◽  
Jin Zhang ◽  
Meizhen Yin
Keyword(s):  
Metal Ions ◽  
Metal Ion ◽  
Metabolic Regulation ◽  
Organic Dyes ◽  
Biological Systems ◽  
High Sensitivity ◽  
Transportation Energy ◽  
Material Transportation ◽  
High Fluorescence ◽  
Metal Ion Detection

Abstract Metal ions are widely present in biological systems and participate in many critical biochemical processes such as material transportation, energy conversion, information transmission and metabolic regulation, making them indispensable substance in our body. They can cause health problems when deficiency or excess occurs. To understand various metabolic processes and facilitate diseases diagnosis, it is very important to measure the content and monitor the distribution of metal ions in individual cells, tissues and whole organisms. Among the various methods for metal ion detection, fluorescent sensors with organic dyes have attracted tremendous attention due to many advantages such as high fluorescence quantum yield, facile modification approaches and biocompatibility in addition to operation ease, high sensitivity, fast detection speed, and real-time detection. This review summarizes the recent progress on the detection and imaging of the metal ions in biological systems including Na+, K+, Ca2+, Mg2+, Fe2+/Fe3+, Zn2+, and Cu2+ provides an opinion on remaining challenges to be addressed in this field.

scholarly journals Effects of Electronegativity and Hydration Energy on the Selective Adsorption of Heavy Metal Ions by Synthetic NaX Zeolite

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4066
Author(s):  
Xianyuan Fan ◽  
Hong Liu ◽  
Emmanuella Anang ◽  
Dajun Ren
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Heavy Metal Ions ◽  
Binary Systems ◽  
Adsorption Mechanism ◽  
Selective Adsorption ◽  
Hydration Energy ◽  
Nax Zeolite ◽  
High Electronegativity

The adsorption capacity of synthetic NaX zeolite for Pb2+, Cd2+, Cu2+ and Zn2+ in single and multi-component systems were investigated. The effects of electronegativity and hydration energy on the selective adsorption, as well as potential selective adsorption mechanism of the NaX zeolite for Pb2+, Cd2+, Cu2+ and Zn2+ were also discussed. The maximum adsorption capacity order of the heavy metals in the single system was Pb2+ > Cd2+ > Cu2+ > Zn2+, and this could be related to their hydration energy and electronegativity. The values of the separation factors (α) and affinity constant (KEL) in different binary systems indicated that Pb2+ was preferentially adsorbed, and Zn2+ presented the lowest affinity for NaX zeolite. The selective adsorption capacities of the metals were in the order, Pb2+ > Cd2+ ≈ Cu2+ > Zn2+. The trend for the selective adsorption of NaX zeolite in ternary and quaternary systems was consistent with that in the binary systems. Pb2+ and Cu2+ reduced the stability of the Si-O-Al bonds and the double six-membered rings in the NaX framework, due to the high electronegativity of Pb2+ and Cu2+ than that of Al3+. The selective adsorption mechanism of NaX zeolite for the high electronegative metal ions could mainly result from the negatively charged O in the Si-O-Al structure of the NaX zeolite, hence heavy metal ions with high electronegativity display a strong affinity for the electron cloud of the oxygen atoms in the Si-O-Al. This study could evaluate the application and efficiency of zeolite in separating and recovering certain metal ions from industrial wastewater.

scholarly journals Removal of Selective Metal Ions from Water with Hydroxy Propyl Cellulose Hydrogel

2019 ◽  
Vol 31 (3) ◽  
pp. 602-606
Author(s):  
Ch. Shanti Devi ◽  
S. Manimukta Devi ◽  
N. Shubhaschandra Singh
Keyword(s):  
Metal Ions ◽  
Adsorption Capacity ◽  
Metal Ion ◽  
Vinyl Pyrrolidone ◽  
Poly Vinyl Alcohol ◽  
Maximum Adsorption Capacity ◽  
Cellulose Hydrogel ◽  
Potential Applications ◽  
Removal Of Metal ◽  
Poly Vinyl Pyrrolidone

In this study, environmentally friendly hydrogels prepared from hydroxy propyl cellulose hydrogels blended with poly(vinyl alcohol) (PVA) and poly(vinyl pyrrolidone) (PVP) were employed to absorb selected metal ions of Cu and Fe to find potential applications in removal of metal ion from water or in wastewater treatment. Highest adsorption capacity of hydroxy propyl cellulose hydrogels blended with PVA or PVP is shown at 0.04 % (w/v) of the metal ion solutions. Hydroxy propyl cellulose hydrogel when blended PVA has shown greater adsorption of Fe(III) ion than Cu(II) ion at higher pH. Hydroxy propyl cellulose hydrogel when blended with PVP also showed maximum adsorption capacity rather than PVA blended hydrogel.

scholarly journals Competitive adsorption and mechanism of hexahydroxy metallic system by aminated solution-blown polyacrylonitrile micro/nanofibers

2021 ◽  
Author(s):  
Huiqing Lou ◽  
Siyu Li ◽  
Xiangwei Feng ◽  
Xianzhong Cao
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Metal Ion ◽  
Metal Removal ◽  
Interactive Effect ◽  
Maximum Adsorption Capacity ◽  
Coupling Mechanism ◽  
Metal System ◽  
Metallic System

Abstract Adsorptive properties for Cd(II), Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II) onto an amidoxime-functionalized polyacrylonitrile (APAN) micro/nanofibers were systematically investigated in hexahydroxy metallic solution system using batch experiments. The interactive effect of multi-metal ions in multi- metal systems was antagonistic in nature, and the adsorption capacity in multi-metal system was lower than that in single-metal system. The Langmuir isotherm model could explain respectively the isotherm and kinetic experimental data for hexahydroxy metallic system with much satisfaction. The maximum adsorption capacity in hexahydroxy metallic for Cd(II), Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II) was calculated to be 98 mg/L, 158 mg/L, 80 mg/L, 76, 312 and 58 mg/L individually. The APAN micro/nanofibers possessed good selectivity toward Pb(II) and Cr(III), over Cd(II), Cu(II), Ni(II), and Zn(II), having the highest selectivity coefficients at 17.52 and 6.07 in the test range. The five adsorption-desorption cycle experiments exhibited that APAN micro/nanofibers adsorbent are readily reusable, and have potential for heavy metal removal from wastewater. The adsorption behavior in multi-metal systems was shown to be complex, including surface complexation, antagonistic competition and displacement reactions. The diversity and selectivity in metal ion adsorption onto the micro/nanofibers relate mainly to the stability constants, and the microscopic coupling mechanism between the heavy metal ions and the functional groups on the fiber surface. This interaction mechanism between the favorable component and other metal ions could contribute significantly to the direct displacement impact illustrated schematically.

scholarly journals Highly Selective Copper Ion Imprinted Clay/Polymer Nanocomposites Prepared by Visible Light Initiated Radical Photopolymerization

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 286 ◽  
Author(s):  
Radhia Msaadi ◽  
Gorkem Yilmaz ◽  
Andrit Allushi ◽  
Sena Hamadi ◽  
Salah Ammar ◽  
...  
Keyword(s):  
Visible Light ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Polymer Nanocomposites ◽  
Metal Ion ◽  
Copper Ions ◽  
Maximum Adsorption Capacity ◽  
Imprinted Polymer ◽  
Ion Imprinted ◽  
Ion Imprinting

There is an urgent demand worldwide for the development of highly selective adsorbents and sensors of heavy metal ions and other organic pollutants. Within these environmental and public health frameworks, we are combining the salient features of clays and chelatant polymers to design selective metal ion adsorbents. Towards this end, the ion imprinting approach has been used to develop a novel nanohybrid material for the selective separation of Cu2+ ions in an aqueous solution. The Cu2+-imprinted polymer/montmorillonite (IIP/Mt) and non-imprinted polymer/montmorillonite (NIP/Mt) nanocomposites were prepared by a radical photopolymerization process in visible light. The ion imprinting step was indeed important as the recognition of copper ions by IIP/Mt was significantly superior to that of NIP/Mt, i.e., the reference nanocomposite synthesized in the same way but in the absence of Cu2+ ions. The adsorption process as batch study was investigated under the experimental condition affecting same parameters such as contact time, concentration of metal ions, and pH. The adsorption capacity of Cu2+ ions is maximized at pH 5. Removal of Cu2+ ion achieved equilibrium within 15 min; the results obtained were found to be fitted by the pseudo-second-order kinetics model. The equilibrium process was well described by the Langmuir isothermal model and the maximum adsorption capacity was found to be 23.6 mg/g. This is the first report on the design of imprinted polymer nanocomposites using Type II radical initiators under visible light in the presence of clay intercalated with hydrogen donor diazonium. The method is original, simple and efficient; it opens up new horizons in the general domain of clay/polymer nanocomposites.

Pentafluorophenyl dipyrrin as probe for transition metal ion detection and bioremediation in Bacillus subtilis and Bacillus cereus

2017 ◽  
Vol 41 (19) ◽  
pp. 11190-11200 ◽  
Author(s):  
Dijo Prasannan ◽  
Chellaiah Arunkumar
Keyword(s):  
Bacillus Subtilis ◽  
Transition Metal ◽  
Metal Ions ◽  
Bacillus Cereus ◽  
Metal Ion ◽  
Transition Metal Ions ◽  
Ion Detection ◽  
Transition Metal Ion ◽  
Metal Ion Detection

Recognition of transition metal ions and bioaccumulation in B. subtilis and B. cereus were examined using pentafluorophenyl dipyrrin probe.

scholarly journals Pelletized ponderosa pine bark for adsorption of toxic heavy metals from water

BioResources ◽  
2007 ◽  
Vol 2 (1) ◽  
pp. 66-81
Author(s):  
Miyoung Oh ◽  
Mandla A. Tshabalala
Keyword(s):  
Heavy Metals ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Ponderosa Pine ◽  
Metal Ion ◽  
Value Added ◽  
Freundlich Isotherm ◽  
Toxic Heavy Metals ◽  
Adsorption Affinity ◽  
Column Adsorption

ark flour from ponderosa pine (Pinus ponderosa) was consolidated into pellets using citric acid as cross-linking agent. The pellets were evaluated for removal of toxic heavy metals from synthetic aqueous solutions. When soaked in water, pellets did not leach tannins, and they showed high adsorption capacity for Cu(II), Zn(II), Cd(II), and Ni(II) under both equilibrium and dynamic adsorption conditions. The experimental data for Cd(II) and Zn(II) showed a better fit to the Langmuir than to the Freundlich isotherm. The Cu(II) data best fit the Freundlich isotherm, and the Ni(II) data fitted both Freundlich and Langmuir isotherms equally. According to the Freundlich constant KF, adsorption capacity of pelletized bark for the metal ions in aqueous solution, pH 5.1 ± 0.2, followed the order Cd(II) > Cu(II) > Zn(II) >> Ni(II); according to the Langmuir constant b, adsorption affinity followed the order Cd(II) >> Cu(II) ≈ Zn(II) >> Ni(II). Although data from dynamic column adsorption experiments did not show a good fit to the Thomas kinetic adsorption model, estimates of sorption affinity series of the metal ions on pelletized bark derived from this model were not consistent with the series derived from the Langmuir or Freundlich isotherms and followed the order Cu(II) > Zn(II) ≈ Cd(II) > Ni(II). According to the Thomas kinetic model, the theoretical maximum amounts of metal that can be sorbed on the pelletized bark in a column at influent concentration of ≈10 mg/L and flow rate = 5 mL/min were estimated to be 57, 53, 50, and 27 mg/g for copper, zinc, cadmium, and nickel, respectively. This study demonstrated the potential for converting low-cost bark residues to value-added sorbents using starting materials and chemicals derived from renewable resources. These sorbents can be applied in the removal of toxic heavy metals from waste streams with heavy metal ion concentrations of up to 100 mg/L in the case of Cu(II).

19F CEST imaging probes for metal ion detection

2017 ◽  
Vol 15 (30) ◽  
pp. 6441-6446 ◽  
Author(s):  
Qiaoli Peng ◽  
Yaping Yuan ◽  
Huaibin Zhang ◽  
Shaowei Bo ◽  
Yu Li ◽  
...  
Keyword(s):  
Metal Ions ◽  
Metal Ion ◽  
Ion Detection ◽  
Cest Imaging ◽  
Highly Sensitive ◽  
Imaging Probes ◽  
Metal Ion Detection

An easily available fluorinated chelator was developed as a highly sensitive 19F iCEST MRI probe for selectively detecting metal ions.

scholarly journals Hg selective adsorption on polypropylene-based hollow fiber grafted with polyacrylamide

2017 ◽  
Vol 36 (1-2) ◽  
pp. 287-299 ◽  
Author(s):  
Changkun Liu ◽  
Jizhen Jia ◽  
Ji’an Liu ◽  
Xiaoyan Liang
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Hollow Fiber ◽  
Heavy Metal Ions ◽  
Hollow Fiber Membrane ◽  
Selective Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Fiber Membrane

A novel polypropylene hollow fiber membrane with a new function of selective adsorption of mercury ions in aqueous solutions was successfully prepared. The surface of the polypropylene hollow fiber membrane was initially modified with polydopamine by surface polymerization, and subsequently grafted with polyacrylamide (PAM) polymer brush via the surface initiated atom transfer radical polymerization (SI-ATRP) technique (thereafter named as PP-PAM). This study investigated the adsorption performance of Hg(II) ions by PP-PAM and the effect of various influencing factors on Hg(II) ion adsorption. The experiment indicated that the Hg(II) adsorption capacity of the PP-PAM increased with the increase of the pH, and the Hg(II) adsorption kinetics was consistent with the pseudo-second-order kinetic model. The adsorption isotherm followed the Langmuir model, with the maximum adsorption capacity calculated to be 0.854 mmol/g for Hg(II) ions. The adsorption study in multi-component system indicated that PP-PAM preferentially adsorbs Hg(II) over Pb(II) ions, with significant adsorption capacity difference of the two heavy metal ions. This study provided an efficient method for the preparation of the adsorptive polypropylene hollow fiber membrane, which expands its application for the selective removal of heavy metal ions.

Sign in / Sign up

Export Citation Format

Share Document