Direct growth of a porous substrate on high-quality graphene via in situ phase inversion of a polymeric solution

Nanoscale ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 4953-4958
Author(s):  
Yanzhe Qin ◽  
Stephan Koehler ◽  
Yongyou Hu ◽  
Yuqing Wu ◽  
Xinwen Peng ◽  
...  

Direct growth of a polymeric porous substrate on high-quality graphene.

Nanoscale ◽  
2020 ◽  
Vol 12 (45) ◽  
pp. 23282-23282
Author(s):  
Yanzhe Qin ◽  
Stephan Koehler ◽  
Yongyou Hu ◽  
Yuqing Wu ◽  
Xinwen Peng ◽  
...  

Correction for ‘Direct growth of a porous substrate on high-quality graphene via in situ phase inversion of a polymeric solution’ by Yanzhe Qin et al., Nanoscale, 2020, 12, 4953–4958, DOI: 10.1039/C9NR09693K.


Author(s):  
Yoshichika Bando ◽  
Takahito Terashima ◽  
Kenji Iijima ◽  
Kazunuki Yamamoto ◽  
Kazuto Hirata ◽  
...  

The high quality thin films of high-Tc superconducting oxide are necessary for elucidating the superconducting mechanism and for device application. The recent trend in the preparation of high-Tc films has been toward “in-situ” growth of the superconducting phase at relatively low temperatures. The purpose of “in-situ” growth is to attain surface smoothness suitable for fabricating film devices but also to obtain high quality film. We present the investigation on the initial growth manner of YBCO by in-situ reflective high energy electron diffraction (RHEED) technique and on the structural and superconducting properties of the resulting ultrathin films below 100Å. The epitaxial films have been grown on (100) plane of MgO and SrTiO, heated below 650°C by activated reactive evaporation. The in-situ RHEED observation and the intensity measurement was carried out during deposition of YBCO on the substrate at 650°C. The deposition rate was 0.8Å/s. Fig. 1 shows the RHEED patterns at every stage of deposition of YBCO on MgO(100). All the patterns exhibit the sharp streaks, indicating that the film surface is atomically smooth and the growth manner is layer-by-layer.


2021 ◽  
Vol 13 (11) ◽  
pp. 2188
Author(s):  
Salvatore Marullo ◽  
Jaime Pitarch ◽  
Marco Bellacicco ◽  
Alcide Giorgio di Sarra ◽  
Daniela Meloni ◽  
...  

Air–sea heat fluxes are essential climate variables, required for understanding air–sea interactions, local, regional and global climate, the hydrological cycle and atmospheric and oceanic circulation. In situ measurements of fluxes over the ocean are sparse and model reanalysis and satellite data can provide estimates at different scales. The accuracy of such estimates is therefore essential to obtain a reliable description of the occurring phenomena and changes. In this work, air–sea radiative fluxes derived from the SEVIRI sensor onboard the MSG satellite and from ERA5 reanalysis have been compared to direct high quality measurements performed over a complete annual cycle at the ENEA oceanographic observatory, near the island of Lampedusa in the Central Mediterranean Sea. Our analysis reveals that satellite derived products overestimate in situ direct observations of the downwelling short-wave (bias of 6.1 W/m2) and longwave (bias of 6.6 W/m2) irradiances. ERA5 reanalysis data show a negligible positive bias (+1.0 W/m2) for the shortwave irradiance and a large negative bias (−17 W/m2) for the longwave irradiance with respect to in situ observations. ERA5 meteorological variables, which are needed to calculate the air–sea heat flux using bulk formulae, have been compared with in situ measurements made at the oceanographic observatory. The two meteorological datasets show a very good agreement, with some underestimate of the wind speed by ERA5 for high wind conditions. We investigated the impact of different determinations of heat fluxes on the near surface sea temperature (1 m depth), as determined by calculations with a one-dimensional numerical model, the General Ocean Turbulence Model (GOTM). The sensitivity of the model to the different forcing was measured in terms of differences with respect to in situ temperature measurements made during the period under investigation. All simulations reproduced the true seasonal cycle and all high frequency variabilities. The best results on the overall seasonal cycle were obtained when using meteorological variables in the bulk formulae formulations used by the model itself. The derived overall annual net heat flux values were between +1.6 and 40.4 W/m2, depending on the used dataset. The large variability obtained with different datasets suggests that current determinations of the heat flux components and, in particular, of the longwave irradiance, need to be improved. The ENEA oceanographic observatory provides a complete, long-term, high resolution time series of high quality in situ observations. In the future, more similar sites worldwide will be needed for model and satellite validations and to improve the determination of the air–sea exchange and the understanding of related processes.


1995 ◽  
Vol 403 ◽  
Author(s):  
T. Akasaka ◽  
D. He ◽  
I. Shimizu

AbstractHigh quality polycrystalline silicon was made on glass from fluorinated precursors by two step growth, i.e., (1) formation of seed crystals on glass by layer-by-layer(LL) technique and (2) grain-growth on the seeds. In LL technique, deposition of ultra-thin films and treatment with atomic hydrogen was repeated alternately. Columnar grains with 200 nm dia were grown epitaxy-like on the seeds by optimizing the deposition parameters under in situ observation with spectroscopic ellipsometry.


Author(s):  
Dae-Kyoung Kim ◽  
Seok-Bo Hong ◽  
Jonghoon Kim ◽  
Mann-Ho Cho

We investigate a high-quality Bi2Se3/black phosphorus (BP) heterostructure prepared through the modulated elemental reactants (MER, annealed in situ at 220 °C for 20 min under a vacuum of 10−9 Torr)...


2021 ◽  
Vol 55 (2) ◽  
pp. 25-34
Author(s):  
Jiawang Chen ◽  
Weitao He ◽  
Peng Zhou ◽  
Jiasong Fang ◽  
Dahai Zhang ◽  
...  

Abstract In order to obtain high-quality microbial samples from the hadal zone, which has a depth of over 6,000 m, a full-ocean-depth sampler with the function of in-situ filtration and preservation was developed. A flow pump and several membrane filters were used for in-situ filtration under the sea. With a multistage filtering structure, the microbes can be initially screened according to their sizes. To avoid the degradation of microbial ribonucleic acid (RNA), a special structure was designed to inject the RNAlater solution into the samples immediately after the filtration. The sampler was tested in our laboratory and deployed during Mariana TS-15 in 2019. It was installed on a hadal lander of Shanghai Ocean University and deployed at MBR02 (11.371°N, 142.587°E, 10,931 m) in the Mariana Trench. A total of 20 L of in-situ seawater was filtered, and membranes with pore sizes of 3 and 0.2 μm were preserved. The study is expected to provide important support for the establishment of a hadal microbial gene pool.


1989 ◽  
Vol 145 ◽  
Author(s):  
H. Temkin ◽  
L. R. Harriott ◽  
J. Weiner ◽  
R. A. Hamm ◽  
M. B. Panish

AbstractWe demonstrate a vacuum lithography process which uses a finely focused Ga ion beam to write the pattern which is then transferred to the InP pattern by low energy dry etching. Surface steps on the order of 1000-2000A in height, and lateral resolution limited only by size of the ion beam, can be efficiently prepared using moderate Ga ion fluences. The surfaces prepared by this process are damage free and suitable for epitaxial overgrowth. GaInAs/InP heterostructures grown on in-situ patterned substrates show excellent morphology and high luminescence efficiency.


Sign in / Sign up

Export Citation Format

Share Document