Recent advances in flexible and wearable sensors for monitoring chemical molecules

Nanoscale ◽  
2022 ◽  
Author(s):  
Hang Zhao ◽  
Rui Su ◽  
Lijun Teng ◽  
Qiong Tian ◽  
Fei Han ◽  
...  

In recent years, real-time health management has been received increasing attention, benefiting from the rapid development of flexible and wearable devices. Conventionally, flexible and wearable devices were used in collecting...

Author(s):  
Yaqoub Yusuf ◽  
Jodi Boutte’ ◽  
Asante’ Lloyd ◽  
Emma Fortune ◽  
Renaldo C. Blocker

A workplace that is a conduit for positive emotions can be important to employees retention and can contribute optimal levels of productivity. Validated tools for examining emotions are primarily subjective and retrospective in nature. Recent advances in technology have led to more novel and passive ways of measuring emotions. Wearable sensors, such as electroencephalogram (EEG), are being explored to assess cognitive and physical burdens objectively and in real-time. Therefore, there exists a need to investigate and validate the use of EEG to examine emotions objectively and in real-time. In this paper, we conducted a scoping review of EEG to measure positive emotions and/or indicators of joy in the workplace. Our review results in 22 articles that employ EEG to study joy in occupational settings. Three major themes identified in the analysis include (1) EEG for symptoms detection and outcomes, (2) Populations studied using EEG, and (3) EEG electrode systems.


2021 ◽  
Vol 11 (3) ◽  
pp. 1235
Author(s):  
Su Min Yun ◽  
Moohyun Kim ◽  
Yong Won Kwon ◽  
Hyobeom Kim ◽  
Mi Jung Kim ◽  
...  

The development of wearable sensors is aimed at enabling continuous real-time health monitoring, which leads to timely and precise diagnosis anytime and anywhere. Unlike conventional wearable sensors that are somewhat bulky, rigid, and planar, research for next-generation wearable sensors has been focused on establishing fully-wearable systems. To attain such excellent wearability while providing accurate and reliable measurements, fabrication strategies should include (1) proper choices of materials and structural designs, (2) constructing efficient wireless power and data transmission systems, and (3) developing highly-integrated sensing systems. Herein, we discuss recent advances in wearable devices for non-invasive sensing, with focuses on materials design, nano/microfabrication, sensors, wireless technologies, and the integration of those.


2017 ◽  
Vol 5 (4RACSIT) ◽  
pp. 41-46
Author(s):  
Vidya Shree ◽  
Sharanabasappa

This paper presents an approach to facilitate mobility for the non-ambulant patients using eye movements and wearable health tracking. The patient’s wheelchair movement is controlled using eye ball movements and also some biomedical assistance functionalities are considered to match the current day needs. The proposed work first detects face from input video, then eye portion will be localized, and finally eye ball (pupil) is detected and tracked using computer vision techniques. The direction of movement is assessed and a command is disseminated to the wheelchair control system. The wearable sensors and\or alarms mounted on patients will update current health status indications on to the monitoring panels. The wearable devices have evolved very smartly which are capable enough to take care of the patient health in real time even during assisted mobility.


2021 ◽  
Vol 2096 (1) ◽  
pp. 012202
Author(s):  
L V Kurzaeva ◽  
T B Novikova ◽  
R Kornev ◽  
P E Majorov ◽  
D I Borovskikh

Abstract The rapid development of virtual and augmented reality technologies today takes place in almost all areas of activity. The relevance of the study is due to the modern demand for developers to use the latest technologies in the field of game development. Currently, technology is becoming more popular, ensuring that the player is immersed in virtual reality. One of these technologies is a suit with wearable sensors that track the position of a person in space in real time. However, this technology is quite young, but has already gained popularity due to its extensive use capabilities and combinations with other game gadgets. Therefore, at the moment there is a problem of no examples of application development using this technology. This article demonstrates the possibilities of a suit with wearable sensors when creating an entertainment application.


2021 ◽  
Vol 24 (3) ◽  
pp. 30-34
Author(s):  
Rishi Shukla ◽  
Neev Kiran ◽  
Rui Wang ◽  
Jeremy Gummeson ◽  
Sunghoon Ivan Lee

Over the past few decades, we have witnessed tremendous advancements in semiconductor and MEMS technologies, leading to the proliferation of ultra-miniaturized and ultra-low-power (in micro-watt ranges) wearable devices for wellness and healthcare [1]. Most of these wearable sensors are battery powered for their operation. The use of an on-device battery as the primary energy source poses a number of challenges that serve as the key barrier to the development of novel wearable applications and the widespread use of numerous, seamless wearable sensors [5].


Author(s):  
Wenqiang Chen ◽  
Lin Chen ◽  
Meiyi Ma ◽  
Farshid Salemi Parizi ◽  
Shwetak Patel ◽  
...  

Wearable devices, such as smartwatches and head-mounted devices (HMD), demand new input devices for a natural, subtle, and easy-to-use way to input commands and text. In this paper, we propose and investigate ViFin, a new technique for input commands and text entry, which harness finger movement induced vibration to track continuous micro finger-level writing with a commodity smartwatch. Inspired by the recurrent neural aligner and transfer learning, ViFin recognizes continuous finger writing, works across different users, and achieves an accuracy of 90% and 91% for recognizing numbers and letters, respectively. We quantify our approach's accuracy through real-time system experiments in different arm positions, writing speeds, and smartwatch position displacements. Finally, a real-time writing system and two user studies on real-world tasks are implemented and assessed.


Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1104
Author(s):  
Shin-Yan Chiou ◽  
Kun-Ju Lin ◽  
Ya-Xin Dong

Positron emission tomography (PET) is one of the commonly used scanning techniques. Medical staff manually calculate the estimated scan time for each PET device. However, the number of PET scanning devices is small, the number of patients is large, and there are many changes including rescanning requirements, which makes it very error-prone, puts pressure on staff, and causes trouble for patients and their families. Although previous studies proposed algorithms for specific inspections, there is currently no research on improving the PET process. This paper proposes a real-time automatic scheduling and control system for PET patients with wearable sensors. The system can automatically schedule, estimate and instantly update the time of various tasks, and automatically allocate beds and announce schedule information in real time. We implemented this system, collected time data of 200 actual patients, and put these data into the implementation program for simulation and comparison. The average time difference between manual and automatic scheduling was 7.32 min, and it could reduce the average examination time of 82% of patients by 6.14 ± 4.61 min. This convinces us the system is correct and can improve time efficiency, while avoiding human error and staff pressure, and avoiding trouble for patients and their families.


Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2727
Author(s):  
Hari Prasanth ◽  
Miroslav Caban ◽  
Urs Keller ◽  
Grégoire Courtine ◽  
Auke Ijspeert ◽  
...  

Gait analysis has traditionally been carried out in a laboratory environment using expensive equipment, but, recently, reliable, affordable, and wearable sensors have enabled integration into clinical applications as well as use during activities of daily living. Real-time gait analysis is key to the development of gait rehabilitation techniques and assistive devices such as neuroprostheses. This article presents a systematic review of wearable sensors and techniques used in real-time gait analysis, and their application to pathological gait. From four major scientific databases, we identified 1262 articles of which 113 were analyzed in full-text. We found that heel strike and toe off are the most sought-after gait events. Inertial measurement units (IMU) are the most widely used wearable sensors and the shank and foot are the preferred placements. Insole pressure sensors are the most common sensors for ground-truth validation for IMU-based gait detection. Rule-based techniques relying on threshold or peak detection are the most widely used gait detection method. The heterogeneity of evaluation criteria prevented quantitative performance comparison of all methods. Although most studies predicted that the proposed methods would work on pathological gait, less than one third were validated on such data. Clinical applications of gait detection algorithms were considered, and we recommend a combination of IMU and rule-based methods as an optimal solution.


Gerontology ◽  
2021 ◽  
pp. 1-10
Author(s):  
Chenzhen Du ◽  
Hongyan Wang ◽  
Heming Chen ◽  
Xiaoyun Fan ◽  
Dongliang Liu ◽  
...  

Aims: Using specials wearable sensors, we explored changes in gait and balance parameters, over time, in elderly patients at high risk of diabetic foot, wearing different types of footwear. This assessed the relationship between gait and balance changes in elderly diabetic patients and the development of foot ulcers, in a bid to uncover potential benefits of wearable devices in the prognosis and management of the aforementioned complication. Methods: A wearable sensor-based monitoring system was used in middle-elderly patients with diabetes who recently recovered from neuropathic plantar foot ulcers. A total of 6 patients (age range: 55–80 years) were divided into 2 groups: the therapeutic footwear group (n = 3) and the regular footwear (n = 3) group. All subjects were assessed for gait and balance throughout the study period. Walking ability and gait pattern were assessed by allowing participants to walk normally for 1 min at habitual speed. The balance assessment program incorporated the “feet together” standing test and the instrumented modified Clinical Test of Sensory Integration and Balance. Biomechanical information was monitored at least 3 times. Results: We found significant differences in stride length (p < 0.0001), stride velocity (p < 0.0001), and double support (p < 0.0001) between the offloading footwear group (OG) and the regular footwear group on a group × time interaction. The balance test embracing eyes-open condition revealed a significant difference in Hip Sway (p = 0.004), COM Range ML (p = 0.008), and COM Position (p = 0.004) between the 2 groups. Longitudinally, the offloading group exhibited slight improvement in the performance of gait parameters over time. The stride length (odds ratio 3.54, 95% CI 1.34–9.34, p = 0.018) and velocity (odds ratio 3.13, 95% CI 1.19–8.19, p = 0.033) of OG patients increased, converse to the double-support period (odds ratio 6.20, 95% CI 1.97–19.55, p = 0.002), which decreased. Conclusions: Special wearable devices can accurately monitor gait and balance parameters in patients in real time. The finding reveals the feasibility and effectiveness of advanced wearable sensors in the prevention and management of diabetic foot ulcer and provides a solid background for future research. In addition, the development of foot ulcers in elderly diabetic patients may be associated with changes in gait parameters and the nature of footwear. Even so, larger follow-up studies are needed to validate our findings.


Sign in / Sign up

Export Citation Format

Share Document