scholarly journals Self-starting of pump units when extinguishing voltage in the energy saving mode

2019 ◽  
Vol 139 ◽  
pp. 01088
Author(s):  
Kudrat Abidov ◽  
Odiljon Zaripov

The article discusses the main processes that occur during the self-start of pumping units of pumping stations of systems of machine lifting for irrigation, ensuring the rational use of electricity, pumping equipment and irrigation water.

2020 ◽  
Vol 129 (4) ◽  
pp. 46-50
Author(s):  
V. V. Shalai ◽  
◽  
M. O. Myznikov ◽  
M. I. Kononova ◽  
◽  
...  

Improving the efficiency of operation of main pumping units is one of the pressing issues of modern practice of operating oil pipelines. The change in pumping capacity leads to a change in the operating modes of pumping equipment. This article proposes a methodology for assessing and improving the efficiency of the operation of oil pipelines based on the rational use of existing pumping equipment of pumping stations.


Author(s):  
Volodymyr Lyubenko

The article analyzes components that have an impact on electricity consumption in the general water supply and distribution system, in particular those that affect the power consumption of pumping stations of the water supply system.This type of pumping units will only increase, as they are the main component of housing and communal services, which reached us inherited. Currently in housing and communal services, the model of the USSR, pumping equipment is completely worn and requires a replacement. The use of outdated pumps, unsatisfactory state of the water supply network, uneconomically use of water by consumers - are considered as the main factors of electricity loss. The purpose of the article is to attract attention to the problem of excessive use of electricity in the general water supply and distribution system. Possible variations are considered to reduce costs and losses of electricity, namely: rational use of existing landing and networks, introduction of the latest technologies, etc.


Author(s):  
I. V. Nikolenko ◽  
E. E. Kotovskaya ◽  
A. O. Budchany

The article presents the values of the failure rate for modern types of pumps of four groups: submersible, designed for drainage and wastewater drainage; domestic; cantilever; submersible - for artesian water intake based on statistical data processing on their operation. The obtained values of the failure rate allow us to evaluate the reliability indicators of hydraulic circuits that use various types of pumping equipment. The article analyzes the failures of pumping equipment with their detailed description and presentation of practical photos accumulated at a specialized enterprise, whose activities are aimed at designing pumping stations, supply, installation and maintenance of pumping equipment on the territory of the Republic of Crimea.


2021 ◽  
Vol 2 (1) ◽  
pp. 5-10
Author(s):  
Kudrat Gayratovich Аbidov ◽  
◽  
Odiljon Olimjonovich Zaripov ◽  
Shakhlo Olimovna Zaripova ◽  

The article deals with the calculation technique for determining the number of self-starting pumping units depending on the network voltage setting and the main design dependencies of the self-starting process of electric motors fed from a three-phase three-winding transformer, and a replacement circuit for one phase of the circuit is made up. Technical solutions for the modernization of pumping units are proposed, which allow the application of the self-starting mode at reclamation pumping stations


Author(s):  
Yuriy Spirin ◽  
Vladimir Puntusov

In the Kaliningrad region there are about 70 % of all polder lands in Russia. On these lands with high potential fertility, it is advisable to intensive agriculture. The area for the average moisture year is an area with excessive moisture, which indicates the need to maintain the rate of drainage on agricultural land. Many different factors play a role in ensuring the drainage rate, one of which is pumping stations and pumping equipment installed on them. An important parameter in the use of pump-power equipment is energy consumption, since in this industry it is a considerable expense item. Improving the energy efficiency of pumping stations on polders is a pressing issue today. At the majority of polder pumping stations, domestic power pumping equipment is installed with excess power and head of 4–8 meters, and a new one is selected based on the maximum possible head in a given place. In the Kaliningrad region, the energy efficiency of polder pumping equipment has never been analyzed. In this paper, a statistical processing of the geodesic pressure of water at the polder pumping stations of the Slavsk region for 2000–2002 was carried out. On the basis of these data and data on the hydraulic characteristics of pressure pipelines, the calculated water pressures were determined for the rational selection of pumping equipment. The calculation of the economic efficiency of pumps with optimal power compared with pumps of excess capacity. The results of the study can serve as a justification for the transition to the pumping equipment with less power and pressure, which will lead to a decrease in the cost of money for electricity.


2019 ◽  
Vol 5 (1) ◽  
pp. 8-12
Author(s):  
Matkarim Ibragimov ◽  
◽  
Gulnoz Ergasheva

Author(s):  
Marat R. Lukmanov ◽  
◽  
Sergey L. Semin ◽  
Pavel V. Fedorov ◽  
◽  
...  

The challenges of increasing the energy efficiency of the economy as a whole and of certain production sectors in particular are a priority both in our country and abroad. As part of the energy policy of the Russian Federation to reduce the specific energy intensity of enterprises in the oil transportation system, Transneft PJSC developed and implements the energy saving and energy efficiency improvement Program. The application of energy-saving technologies allowed the company to significantly reduce operating costs and emissions of harmful substances. At the same time, further reduction of energy costs is complicated for objective reasons. The objective of this article is to present additional methods to improve the energy efficiency of oil transportation by the example of the organizational structure of Transneft. Possibilities to reduce energy costs in the organization of the operating services, planning and execution of work to eliminate defects and preparatory work for the scheduled shutdown of the pipeline, the use of pumping equipment, including pumps with variable speed drive, the use of various pipelines layouts, changing the volume of oil entering the pipeline system and increase its viscosity.


Author(s):  
Sergei, Rybel’ ◽  
V. Kuninin ◽  
S. Gerasimov ◽  
A. Bakushin

Приведен опыт применения частотно-регулируемых электроприводов на насосных станциях ООО Водоканал г. Новокузнецка. Приводятся преимущества и недостатки данного технического устройства. Показано, что в настоящее время использование частотно-регулируемых приводов позволило снизить потребление электроэнергии более чем на 20, уменьшить затраты на ремонт и обслуживание, повысить срок службы электродвигателей, уменьшить величину пускового тока, снизить утечки воды и нагрузку на насосное оборудование и трубопроводную арматуру. Применение частотно-регулируемых электроприводов оправдало себя и в тех случаях, когда требуется регулирование параметров для обеспечения технологии (регулирование скорости, производительности и т. д.), приведение параметров оборудования к требуемым значениям без его замены (в расчете на увеличение загрузки оборудования до номинала в последующий период), компенсация суточной неравномерности потребления воды.The experience of using variable speed drives at the pumping stations operated by Vodokanal LLC in Novokuznetsk is presented. The advantages and disadvantages of this technical device are specified. It is demonstrated that currently, the use of variable speed drives provides for reducing the energy consumption by more than 20, reducing the repair and maintenance costs for improving the service life of electric motors for reducing inrush current, water leaks and the load on the pumping equipment and pipeline valving. The use of variable speed drives has paid off even in case where adjusting the parameters to ensure the technology (velocity, performance, etc.) bringing the equipment parameters to the required values without replacing it (in order to increase the equipment load to the nominal value for the subsequent period) compensating for daily irregularities in water consumption are required.


2018 ◽  
Vol 170 ◽  
pp. 03017 ◽  
Author(s):  
Alexey Dmitriev ◽  
Vyacheslav Gerasimov

The expediency of using a variable frequency drive for pumping units was repeatedly proved both from the point of view of the economic component and the technological one. However, the construction of automatic control systems for the operating parameters of pumping stations is mainly based on maintaining the pressure setpoint and does not include monitoring the efficiency of the aggregates working in the group and, the more so, its regulation. In this paper, an algorithm is developed for the energy efficient management of centrifugal pump units, which allows not only maintaining the pressure setpoint, but also optimizing their efficiency.


Sign in / Sign up

Export Citation Format

Share Document