scholarly journals An economic assessment of lignocellulosic biomass power plants

2020 ◽  
Vol 191 ◽  
pp. 02003
Author(s):  
Javier Menéndez ◽  
Jorge Loredo
Keyword(s):  
Power Plant ◽  
Economic Model ◽  
Power Plants ◽  
Economic Assessment ◽  
Electrical Energy ◽  
Hot Water ◽  
Energy Sources ◽  
Wet Biomass ◽  
Solid Biomass ◽  
Biomass Power Plants

In 2016, electricity generation from solid biomass increased by 0.7 Mtoe in EU, compared with 2015, to 10.3 Mtoe (119.78 TWh), a 7.6% growth rate. Solid biomass may be used for: i) heating & cooling and hot water for domestic uses, ii) heating for industrial processes and iii) power generation. Unlike other renewable energy sources (RES), such as wind and solar photovoltaic (intermittent energy sources), solid biomass power plants provide dispatchable energy when needed. Therefore, the security of supply could also be increased. In addition, the use of solid biomass has significant advantages, such as the creation of jobs related to the power plant and collection of raw material used to produce energy. In this paper, an economic assessment of forest biomass power plants is carried out in the Iberian electricity system. According to current Spanish electrical regulation, in which three economic parameters are considered as income (day-ahead market, operation and investment), an economic model has been developed for the regulatory useful life (25 years). Investment costs for biomass power plants of 15, 30 and 50 MWe have been estimated. Operation & Maintenance and fuel costs, considering different prices of wet biomass (50-60 € t-1) with a moisture content of 40% and a lower calorific value of 2.8 MWh t-1 on average, have also been considered in the economic model. Net Present Value (NPV), Internal Rate of Return (IRR) and payback period have been obtained in all scenarios. The results obtained show that a biomass power plant with a power of 50 MWe may produce 337.5 GWh year-1of net electrical energy using 446.43 kt year-1 of wet biomass. Considering a price of electrical energy of 145 € MWh-1 and a woody biomass cost of 0.0178 € kWh-1, the NPV and IRR reach 165.6 M€ and 17.63%, respectively.

scholarly journals The use of organic zeotropic mixture with high temperature glide as a working fluid in medium-temperature vapor power plant

2017 ◽  
Vol 21 (2) ◽  
pp. 1153-1160 ◽  
Author(s):  
Aleksandra Borsukiewicz
Keyword(s):  
Power Plant ◽  
Power Plants ◽  
Electrical Energy ◽  
Hot Water ◽  
Working Fluid ◽  
Large Temperature ◽  
Medium Temperature ◽  
Calculation Results ◽  
Zeotropic Mixture ◽  
Selection Of

The paper presents the idea of using organic substances as working fluids in vapor power plants, in order to convert the low and medium temperature thermal energy sources into electrical energy. The calculation results of the power plant efficiency for butane-ethane zeotropic mixtures of different mass compositions, for the power plant supplied with hot water having a temperature of 120?C. Based on the results of thermal-flow calculations it was found that the use of zeotropic mixture does not allow to increase the efficiency and output of the power plant (these values appeared as slightly lower ones). However, it was found that, through the selection of a mixture of sufficiently large temperature glide, the heat exchange surface of the condenser can be reduced or a co-generation system can be implemented.

INTEGRATION OF THE HEAT EXCHANGE PROCESS OF POWER PLANT

2021 ◽  
pp. 41-48
Author(s):  
Yu. Selikhov ◽  
V. Kotsarenko ◽  
K. Gorbunov
Keyword(s):  
Renewable Energy ◽  
Power Plant ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Exchange Process ◽  
Thermal Power ◽  
Environmental Safety ◽  
The United States ◽  
Hot Water ◽  
Energy Sources

Renewable energy sources (RES) are not limited by geologically accumulated reserves. Their use and consumption will not lead to the inevitable depletion of the Earth's reserves, and they do not pollute the environment. The main motive for the accelerated development of renewable energy in Europe, the United States and many other countries is concern for energy independence and environmental safety. Thus, the EU has adopted a program to achieve the contribution of renewable energy sources to the energy balance by 2020 up to 20%, and by 2040 – up to 40%. Renewable energy is characterized by versatility and diversity. In the list of tasks arising in the implementation of renewable energy (RE) projects (except technological and technical), there are issues of assessing the possibility and efficiency of using RES for energy supply to the regions. At the same time, it should be borne in mind that often the user is interested in comprehensive assessments for various types of energy sources. In specific regions, the most effective can be either the use of hybrid power plants, or the creation of thermal power plants using various types of renewable energy. In connection with the complexity of this problem, as well as the geographic “regionality” of renewable energy, the topic of this article becomes possible and relevant. A heat and power plant is proposed for supplying: electricity, hot water, hot air and heating, in which, together with a wind power generator, a double-circuit solar installation, a heat pump, electricity and heat accumulators are used. This installation allows to reduce the cost of heat energy by reducing material consumption and costs of equipment used, to save fossil fuel; produce electricity and supply the surplus to the state power grid; reduce heat load and environmental pollution.

Power Cycles of Generation III and III+ Nuclear Power Plants

2014 ◽  
Author(s):  
Alexey Dragunov ◽  
Eugene Saltanov ◽  
Igor Pioro ◽  
Pavel Kirillov ◽  
Romney Duffey
Keyword(s):  
Renewable Energy ◽  
Natural Gas ◽  
Thermal Efficiency ◽  
Nuclear Power ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Thermal Power ◽  
Electrical Energy ◽  
Energy Sources ◽  
Thermal Power Plants

It is well known that the electrical-power generation is the key factor for advances in any other industries, agriculture and level of living. In general, electrical energy can be generated by: 1) non-renewable-energy sources such as coal, natural gas, oil, and nuclear; and 2) renewable-energy sources such as hydro, wind, solar, biomass, geothermal and marine. However, the main sources for electrical-energy generation are: 1) thermal - primary coal and secondary natural gas; 2) “large” hydro and 3) nuclear. The rest of the energy sources might have visible impact just in some countries. Modern advanced thermal power plants have reached very high thermal efficiencies (55–62%). In spite of that they are still the largest emitters of carbon dioxide into atmosphere. Due to that, reliable non-fossil-fuel energy generation, such as nuclear power, becomes more and more attractive. However, current Nuclear Power Plants (NPPs) are way behind by thermal efficiency (30–42%) compared to that of advanced thermal power plants. Therefore, it is important to consider various ways to enhance thermal efficiency of NPPs. The paper presents comparison of thermodynamic cycles and layouts of modern NPPs and discusses ways to improve their thermal efficiencies.

scholarly journals The reduction of atmospheric emissions after the implementation of first Polish nuclear power plant

2018 ◽  
Vol 177 ◽  
pp. 01001 ◽  
Author(s):  
Maciej Cholewiński
Keyword(s):  
Power Plant ◽  
Solid Fuel ◽  
Nuclear Power ◽  
Power Plants ◽  
Environmental Benefits ◽  
Combustion Model ◽  
Hard Coal ◽  
Atmospheric Emissions ◽  
Solid Biomass ◽  
Representative Samples

In this work the environmental benefits in the atmospheric emissions after the implementation of 3,000 MW nuclear power plants were assessed and presented. To determine the quantity of avoided emissions of CO2, NOx, SO2 and Hg compounds, harmonised stoichiometric combustion model dedicated to solid fuel fired power plant was created. To increase the credibility of the studies, future strict emission standards (Directive 2010/75/EU, BAT documents for LCP) were included as well. In conducted studies, representative samples of 3 different Polish solid fuels were examined (by comprehensive proximate and ultimate analysis) and used in assessment. It was proven that by the replacement of thermal solid fuel power plant by nuclear unit (with annual production rate of 22.4 TWh net) up to 16.4 million tonnes of lignite, 8.9 million tonnes of hard coal or 13.1 million tonnes of solid biomass can be saved. Further, for the case of lignite, the emission, at least, of 21.29 million tonnes of CO2 (6.9% of all Polish emission in 2015), 1,610 tonnes of dust (0.4%), 16,102 tonnes of NOx (2.2%), 16,102 tonnes of SO2 (2.0%) and 564 kg of mercury (5.9%) can be avoided. For selected hard coal, calculated emission savings were equal to 17.60 million tonnes of CO2 (5.7%), 1,357 tonnes of dust (0.4%), 13,566 tonnes of NOx (1.9%), 13,566 tonnes of SO2 (1.7%), 271 kg of mercury (2.9%), and for biomass - equal to 20.04 million tonnes of CO2 (6.5%), 1,471 tonnes of dust (0.4%), 14,712 tonnes of NOx (2.0%), 14,712 tonnes of SO2 (1.8%) and 294 kg of mercury (3.1%).

scholarly journals A countrywide analysis of 27 solar power plants installed at different climates

2022 ◽  
Vol 12 (1) ◽  
Author(s):  
Talat Ozden
Keyword(s):  
Power Plant ◽  
Alternative Energy ◽  
Power Plants ◽  
Solar Power ◽  
Meteorological Data ◽  
Energy Sources ◽  
Climate Classification ◽  
Climate Type ◽  
Monthly Average ◽  
The World

AbstractThe world is still heavily using nonconventional energy sources, which are worryingly based on carbon. The step is now alternative energy sources hoping that they will be more environmentally friendly. One of the important energy conversion forms by using these sources is photovoltaic solar systems. These type of power plants is on the increase in everyday on the world. Before investment a solar power plant in a specified region, a techno-economic analyse is performed for that power plant by using several meteorological data like solar irradiance and ambient temperature. However, this analyses generally lacks evaluation on effects of climatic and geographical conditions. In this work, 5 years of data of 27 grid-connected photovoltaic power plants are investigated, which are installed on seven different climate types in Turkey. Firstly, the power plants are categorized considering the tilt angles and Köppen–Gieger climate classification. The performance evaluations of the plants are mainly conducted using monthly average efficiencies and specific yields. The monthly average efficiencies, which were classified using the tilts and climate types were from 12 to 17%, from 12 to 16% and from 13 to 15% for tilts 30°/10°, 25° and 20°, respectively. The variation in the specific yields decrease with elevation as y(x) =  − 0.068x + 1707.29 (kWh/kWp). As the performances of photovoltaic systems for some locations within the Csb climatic regions may relatively lower than some other regions with same climate type. Thus, techno-economic performance for PVPP located in this climate classification should be carefully treated.

scholarly journals A Project To Estimate The Power Capacity Of Geothermal Power Plants Based On The Enthalpy Of Geothermal Fluid And Plant Design

2021 ◽  
Author(s):  
Obumneme Oken
Keyword(s):  
Power Plant ◽  
Geothermal Energy ◽  
Electricity Generation ◽  
Power Plants ◽  
Hot Water ◽  
Power Capacity ◽  
Geothermal Fluid ◽  
Direct Heating ◽  
Single Flash ◽  
Geothermal Power

Nigeria has some surface phenomena that indicate the presence of viable geothermal energy. None of these locations have been explored extensively to determine the feasibility of sustainable geothermal energy development for electricity generation or direct heating. In this context, the present study aims to provide insight into the energy potential of such development based on the enthalpy estimation of geothermal reservoirs. This particular project was conducted to determine the amount of energy that can be gotten from a geothermal reservoir for electricity generation and direct heating based on the estimated enthalpy of the geothermal fluid. The process route chosen for this project is the single-flash geothermal power plant because of the temperature (180℃) and unique property of the geothermal fluid (a mixture of hot water and steam that exists as a liquid under high pressure). The Ikogosi warm spring in Ekiti State, Nigeria was chosen as the site location for this power plant. To support food security efforts in Africa, this project proposes the cascading of a hot water stream from the flash tank to serve direct heat purposes in agriculture for food preservation, before re-injection to the reservoir. The flowrate of the geothermal fluid to the flash separator was chosen as 3125 tonnes/hr. The power output from a single well using a single flash geothermal plant was evaluated to be 11.3 MW*. This result was obtained by applying basic thermodynamic principles, including material balance, energy balance, and enthalpy calculations. This particular project is a prelude to a robust model that will accurately determine the power capacity of geothermal power plants based on the enthalpy of fluid and different plant designs.

scholarly journals Gerakan Kontra Pembangunan Shelter 9 Dan 10 Pltu Suralaya Merak-Banten

ijd-demos ◽  
2020 ◽  
Vol 2 (2) ◽  
Author(s):  
Nida Urrohmah ◽  
Karin Caroline Kelly ◽  
Fitri Yuliani
Keyword(s):  
Power Plant ◽  
Power Plants ◽  
Electrical Energy ◽  
Environmental Damage ◽  
Steam Power ◽  
Steam Power Plant ◽  
Steam Power Plants ◽  
Local Residents

Electric Steam Power Plants (PLTU) need coal as fuel to produce electricity. The higher the electrical energy needed to eat, the more fuel will be used. This has happened in the construction of shelters 9 and 10 Suralaya Merak-Banten steam power plant (PLTU). This development is reaping various kinds of rejection because it causes environmental damage not only in the area around the development operation but also in the Greater Jakarta area. The rejection movement was initiated by local residents and supported by international Environmental NGOs.Pembangkit Listrik Tenaga Uap (PLTU) membutuhkan batu bara sebagai bahan bakar untuk menghasilkan energi listrik. Semakin tinggi energi listrik yang dibutuhkan makan akan semakin banyak bahan bakar yang digunakan. Hal ini terjadi pada pembangunan shelter 9 dan 10 PLTU Suralaya di pulau Jawa spesifiknya di daerah Merak-Banten. Pembangunan ini menuai berbagai macam penolakan karena mengakibatkan kerusakan lingkungan tidak hanya pada wilayah sekitar operasi pembangunan namun juga pada wilayah Jabodetabek. Gerakan penolakan diinisiasi tentunya oleh warga setempat dan didukung dengan NGO Internasional penggiat isu lingkungan. 

scholarly journals Pengaruh Ketinggian Dan Panjang Saluran Air Laut Terhadap Daya Yang Dihasilkan Pada Prototype Tidal Barrage

2021 ◽  
Vol 2 (2) ◽  
Author(s):  
Bima Sakti ◽  
Nur Rani Alham ◽  
Ahmad Nur Fajri ◽  
Ilham Rizal Ma’rif
Keyword(s):  
Power Plant ◽  
Electricity Generation ◽  
Power Plants ◽  
Sea Water ◽  
Electrical Energy ◽  
Limited Resources ◽  
Natural Ecosystem ◽  
Tidal Power ◽  
Water Turbine ◽  
Water Turbines

<em>The need for electricity in Indonesia is very important considering the limited resources and the lack of manpower, making Indonesia desperately need to increase electricity generation. One source of energy that can be converted into electrical energy is tidal barrage using the tidal barrage method. The application of this energy is still very small in Indonesia but there are a number of areas that have the potential to be implemented by the power plant. Tidal power plants that utilize the potential energy contained in the differences in tides and tides of sea water by trapping water in dams and then moving water turbines and when the water turbine is connected to a generator can produce electrical energy. Related to how the output of the generated power can it is known by looking at what height the water level drives the turbine. This type of power plant is environmentally friendly because it does not damage the natural ecosystem and the dam can be used for various activities.</em><em></em>

Pengembangan Sistem Pengaturan Suplai Beban (Ats) Pada Pembangkit Listrik Tenaga Hibrid Berbasiskan Mikrokontroler

Kilat ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 261-271
Author(s):  
Sugeng Purwanto
Keyword(s):  
Power Plant ◽  
Alternative Energy ◽  
Power Plants ◽  
Solar Power ◽  
Electrical Energy ◽  
Solar Power Plant ◽  
Solar Panels ◽  
Hybrid Power ◽  
Solar Power Plants ◽  
One Year

ABSTRACT Renewable energy is potential alternative energy to replace the central role of fossil energy which has been going on since the early 20th century. The solar power plant is alternative energy, especially for households and industry, and can be designed as a hybrid power plant consisting of solar panels, batteries, an automatic transfer switch (ATS), and a grid. This research will focus on developing ATS based on a microcontroller. It functions to regulate the load supply automatically from the three sources of electrical energy, like solar panels, batteries, and grid while the microcontroller functions to monitor the transfer of power from the solar power plant to grid and voltage movements in the system so that current and voltage data can be recorded from time to time to improve system reliability, effectiveness, and efficiency of the tool. ATS components consist of MCB, magnetic contactor, timer H3CR, relay, 2000VA inverter, solar charge controller 100A, NodeMCU ESP8266 IoT, and battery 12V 100AH. This research is conducted in one year to produce ATS based on a microcontroller that can automatically regulate the supply of loads from the three sources of electrical energy with a good level of efficiency and stability.  Keywords: solar power plants, hybrid power plants, an automatic transfer switch.  ABSTRAK Energi baru terbarukan merupakan energi alternatif yang potensial untuk menggantikan peran sentral dari energi fosil yang telah berlangsung sejak awal abad ke 20. PLTS merupakan salah satu energi alternatif penyedia energi listrik untuk rumah tangga dan industri serta dapat dirancang sebagai sistem pembangkit listrik tenaga hibrid (PLTH) yang terdiri dari panel surya, baterai, sistem pengaturan beban atau ATS (automatic transfer switch) dan jaringan PLN. Peneltian difokuskan pada pengembangan sistem ATS berbasiskan mikrokontroler. ATS berfungsi untuk mengatur suplai beban secara otomatis dari ketiga sumber energi listrik yaitu panel surya, baterai dan PLN sedangkan mikrokontroler berfungsi memonitor perpindahan daya dari PLTS ke sumber PLN dan pergerakan tegangan pada sistem sehingga dapat dilakukan pencatatan data arus dan tegangan dari waktu ke waktu sehingga dapat meningkatkan keandalan sistem, efektifitas dan efisiensi alat. Komponen ATS terdiri dari MCB, magnetic contactor, timer H3CR, relay, inverter 2000VA, solar charge controller 100A, NodeMCU ESP8266 IoT, dan baterai 12V 100Ah. Penelitian ini akan dilakukan dalam periode satu tahun menghasilkan ATS berbasiskan mikrokontroler yang dapat mengatur suplai beban secara otomatis dari ketiga sumber energi listrik dengan tingkat efisiensi dan kestabilan yang baik. Tim penelitian ini tediri dari 3 orang dan berasal dari program studi teknik elektro, IT PLN.  Kata kunci: pembangkit listrik tenaga surya, pembangkit listrik tenaga hibrid, pengaturan suplai beban.

Modeling of Gas Turbine-Based Cogeneration System

2012 ◽  
Author(s):  
Farshid Zabihian ◽  
Alan S. Fung ◽  
Fabio Schuler
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Power Plants ◽  
Superheated Steam ◽  
Hot Water ◽  
Cogeneration System ◽  
Exhaust Stream ◽  
Low Efficiency ◽  
Gas Turbine Cycle ◽  
Wasted Energy

Gas turbine-based power plants generate a significant portion of world’s electricity. This paper presents the modeling of a gas turbine-based cogeneration cycle. One of the reasons for the relatively low efficiency of a single gas turbine cycle is the waste of high-grade energy at its exhaust stream. In order to recover this wasted energy, steam and/or hot water can be cogenerated to improve the cycle efficiency. In this work, a cogeneration power plant is introduced to use this wasted energy to produce superheated steam for industrial processes. The cogeneration system model was developed based on the data from the Whitby cogeneration power plant in ASPEN PLUS®. The model was validated against the operational data of the existing power plant. The electrical and total (both electrical and thermal) efficiencies were around 40% and 70% (LHV), respectively. It is shown that cogenerating electricity and steam not only significantly improve the general efficiency of the cycle but it can also recover the output and efficiency losses of the gas turbine as a result of high ambient temperature by generating more superheated steam. Furthermore, this work shows that the model could capture the operation of the systems with an acceptable accuracy.

Sign in / Sign up

Export Citation Format

Share Document