scholarly journals Green Manufacturing Challenge in Small and Medium Industries (SMEs) Batik Laweyan Surakarta

2020 ◽  
Vol 202 ◽  
pp. 03011
Author(s):  
Puspitasari Nia Budi ◽  
Yulianto Muhammad Faisal Afa ◽  
Rosyada Zainal Fanani

Small and medium industries (SMEs) are the main contributor of the economic growth in the countries, especially developing countries. On the other hand, SMEs also produce serious problems to the environment. Therefore, SMEs, especially the textile and apparel sector need to apply green manufacturing (GM). GM can reduce the amount of waste and pollution produced. It can lead to financial benefits and a positive public image of the SMEs if properly implemented. It is a challenge to apply GM in SMEs because their limitation of knowledge and resources. It needs a study the enabler and inhibiter factors to the application of GM. It need also an analysis how the factors related each other. The aim of this study is to determine the most significant enabler and inhibiter factors in applying GM to SMEs at Kampung Batik Laweyan Surakarta. This study uses Interpretive Structural Modeling (ISM) approach to compare the perceptions of respondents regarding the relationship of each factor. The results show that the main enabler factor is the implementation of environmental regulations and strict supervision, while the main inhibiter factor is the lack of subsidies provided for SMEs to implement GM.

2019 ◽  
Vol 12 (4) ◽  
pp. 163
Author(s):  
Abida Hafeez ◽  
Karim Bux Shah Syed ◽  
Fiza Qureshi

This paper analyses the impact of research and development (R&D) expenditures on economic growth in a global perspective utilizing the data of 60 developed and developing countries from 1998 to 2015. This study employs the Pooled Mean Group Estimators (PMGE) proposed by Pesaran et al. (1999) to find a heterogeneous trend among different groups of countries. The findings suggest that there exist a significant & positive relationship amongst R&D spending and economic growth globally, which appears consistent with economic theory. The study also confirms both long and short run relationship of economic growth and expenditures on R& D except that the short-run coefficient appears insignificant in the case of developing countries. This study implies that economies with higher R& D spending tend to have higher economic growth. This study has retentive policy implications for management and policymakers who could make important endeavors at the national level in this regard.


1978 ◽  
Vol 16 (4) ◽  
pp. 549-564 ◽  
Author(s):  
J. W. Garmany

This article discusses some of the issues involved in the choice of technology in developing countries, especially those in Africa, and the relationship of this to employment and output. The problem is to find an optimum combination of productive resources that comes nearest to satisfying two objectives: the full and economically efficient utilisation of such resources, and the creation of as much surplus as possible over current consumption, thereby making possible new investment and long-term growth.


During the last few years of his life Prof. Simon Newcomb was keenly interested in the problem of periodicities, and devised a new method for their investigation. This method is explained, and to some extent applied, in a paper entitled "A Search for Fluctuations in the Sun's Thermal Radiation through their Influence on Terrestrial Temperature." The importance of the question justifies a critical examination of the relationship of the older methods to that of Newcomb, and though I do not agree with his contention that his process gives us more than can be obtained from Fourier's analysis, it has the advantage of great simplicity in its numerical work, and should prove useful in a certain, though I am afraid, very limited field. Let f ( t ) represent a function of a variable which we may take to be the time, and let the average value of the function be zero. Newcomb examines the sum of the series f ( t 1 ) f ( t 1 + τ) + f ( t 2 ) f ( t 2 + τ) + f ( t 3 ) f ( t 3 + τ) + ..., where t 1 , t 2 , etc., are definite values of the variable which are taken to lie at equal distances from each other. If the function be periodic so as to repeat itself after an interval τ, the products are all squares and each term is positive. If, on the other hand, the periodic time be 2τ, each product will be negative and the sum itself therefore negative. It is easy to see that if τ be varied continuously the sum of the series passes through maxima and minima, and the maxima will indicated the periodic time, or any of its multiples.


1990 ◽  
Vol 7 (4) ◽  
pp. 329-346 ◽  
Author(s):  
William McTeer ◽  
James E. Curtis

This study examines the relationship between physical activity in sport and feelings of well-being, testing alternative interpretations of the relationship between these two variables. It was expected that there would be positive relationships between physical activity on the one hand and physical fitness, feelings of well-being, social interaction in the sport and exercise environment, and socioeconomic status on the other hand. It was also expected that physical fitness, social interaction, and socioeconomic status would be positively related to psychological well-being. Further, it was expected that any positive zero-order relationship of physical activity and well-being would be at least in part a result of the conjoint effects of the other variables. The analyses were conducted separately for the male and female subsamples of a large survey study of Canadian adults. The results, after controls, show a modest positive relationship of physical activity and well-being for males but no such relationship for females. The predicted independent effects of the control factors obtained for both males and females. Interpretations of the results are discussed.


2016 ◽  
Vol 11 (3) ◽  
pp. 802-810 ◽  
Author(s):  
Nitin Yashwant Patil ◽  
Ravi M. Warkhedkar

Purpose In the past decade, much has been written about knowledge management (KM) in the manufacturing; however, less attention has been paid to the Indian automobile ancillary industries located in Chinchwad, Pune. It is suitable to find out the relationship of the factors of the study. It helps in identifying the hierarchy of factors to be taken, and interlinking of production department with KM improves the productivity of the industries. Categorization of these principles based on their driving power (principles which hold other principles) and dependence (principles which are dependent on other principles) has also been examined for KM implementation to study the driving power and dependence power of these principles. This paper aims to determine the roadmap of KM implementation and categorize KM principles based on their driving power for manufacturing industries with the use of the interpretive structural modeling (ISM)-based model. The results indicate that the principles possessing higher driving power, such as KM, inventory control, quality control, productivity and scheduling and their interlinking. The major contribution of this research lies in the development of contextual relationship among various identified factors of KM and determination of their driving and dependence power through a single systemic framework. Design/methodology/approach In this paper, author find out the suitability ISM for Indian Automobile industries to find the relation among the variables. Findings ISM model has been developed for the hierarchy of the identified KM. As ISM model results a hypothetical hierarchy which needs a proper quantitative analysis to evaluate their percentage effectiveness in the hierarchy. Research limitations/implications It is applied to automobile industries with limited number of variables that will show the dependence variable and driving variables and their interrelations. It can be applied other fields to fine the relationship of variables. Practical implications The ISM may be used in supply chain management and total quality management to find interlinking between the variables. Originality/value The limited data collected from Pimpri Chinchwad industrial area of Pune from Maharashtra state (India).


PEDIATRICS ◽  
1962 ◽  
Vol 30 (6) ◽  
pp. 909-916
Author(s):  
Herbert I. Goldman ◽  
Samuel Karelitz ◽  
Hedda Acs ◽  
Eli Seifter

One hundred four healthy premature infants, of birth weight 1,000 to 1,800 gm, were fed one of five feedings: (1) human milk; (2) human milk plus 13 meq/l of sodium chloride; (3) human milk plus 13 meq/l of sodium chloride and 18 meq/l of potassium chloride; (4) a half-skimmed cows milk formula; and (5) a partially-skimmed vegetable oil, cows milk formula. The infants fed any of the three human milk formulas gained weight at a slower rate than the infants fed either of the two cows milk formulas. Infants whose diets were changed from unmodified human milk to the half-skimmed cows milk gained large amounts of weight, and at times were visibly edematous. Infants whose diets were changed from the human milks with added sodium chloride, to the half-skimmed cows milk, gained lesser amounts of weight and did not become edematous. The infants fed the two cows milk diets gained similar amounts of weight, although one diet provided 6.5 gm/kg/day, the other 3.1 gm/kg/day of protein.


Lampas ◽  
2019 ◽  
Vol 52 (4) ◽  
pp. 437-452
Author(s):  
Gerard Boter

Summary The present article discusses three hotly debated interpretational issues in Diotima´s speech in Plato´s Symposium. The first of these is the relationship of Diotima´s speech to other dialogues, such as the Phaedo and the Republic, with regard to the immortality of the soul. It is argued that there is no discrepancy at all, because the immortality of the soul does not play any role in the Symposium. The second issue is the nature of the three classes of posterity: biological, spiritual and philosophical. Whereas the posterity of the first two classes can be relatively easily defined, the character of the philosopher´s posterity, ‘true virtue’, remains rather vague. It may consist in dialectical teaching of the Idea of Beauty by Socrates. Thirdly, it is argued that the philosopher´s immortality differs only gradually from the immortality of the other two classes, that is, the philosopher as a man only survives by means of his posterity.


2019 ◽  
Vol 34 (1) ◽  
pp. 99-117
Author(s):  
Huh Taewook

This study attempts to analyze to what extent governance and sustainable development (SD) empirically appear compatible in the thirtyfive OECD countries through the fuzzy-set ideal type analysis, and identify which ideal types appear coupled or decoupled, and then reveal which countries belong to the coupled types or to the decoupled types. In short, twenty-two countries (including Sweden (fuzzy score, 0.953), Denmark (0.920), Finland (0.914), Norway (0.911) in Type 1 (G*S, ‘strong G-S coupled countries’); and Turkey (0.906), Greece (0.833), Mexico (0.828) in Type 4 (g*s, ‘lite g-s coupled countries’) are in line with the accepted conventions regarding the compatible relationship between governance and SD. On the other hand, the rest of thirteen countries (including USA (fuzzy score, 0.815), Luxembourg (0.721), Australia (0.660) in Type 2 (G*s, ‘G-s decoupled countries’); and Slovenia (0.728), France (0.644), Czech Rep. (0.625) in Type 3 (g*S, ‘g-S decoupled countries’) may indicate that the relationship of governance and SD is in fact experiencing tensions in the national contexts. These findings are characterized by the substance (of SD) and procedure (of governance) divide. Considering the results, this study focuses on the idea of reflexivity or reflexive capacity.


Sign in / Sign up

Export Citation Format

Share Document