scholarly journals Assessing the indoor thermal comfort of a toll station

2019 ◽  
Vol 282 ◽  
pp. 02031
Author(s):  
Ricardo M.S.F. Almeida ◽  
Eva Barreira ◽  
Sandra Soares ◽  
Ramos Nuno M.M. ◽  
Sérgio Lopes ◽  
...  
Keyword(s):  
Thermal Comfort ◽  
Indoor Environment ◽  
Thermal Sensation ◽  
Physical Parameters ◽  
Indoor Environmental Quality ◽  
Thermal Perception ◽  
Health And Wellbeing ◽  
Local Thermal Comfort ◽  
Toll Station ◽  
Global And Local

The importance of a good indoor environment for peoples’ health and wellbeing is nowadays clearly established. Besides enhancing the wellbeing of building occupants and helping decrease the occurrence of building related illness, a good indoor environment can also lead to a decrease in worker complaints and absenteeism. This paper presents the results of a three-month monitoring campaign where the thermal comfort of a toll station was evaluated, including the main room and the cabins. The physical parameters required for the assessment of both global and local thermal comfort were measured and the results were compared with the thermal perception of the occupants, which was collected through questionnaires. The indoor environmental quality in the main room was better than in the cabins and a mismatch between the PMV index and the occupants thermal sensation was identified.

scholarly journals Indoor Thermal Comfort Analysis: A Case Study of Modern and Traditional Buildings in Hot-Arid Climatic Region of Ethiopia

Urban Science ◽  
2021 ◽  
Vol 5 (3) ◽  
pp. 53
Author(s):  
Haven Hailu ◽  
Eshetu Gelan ◽  
Yared Girma
Keyword(s):  
Thermal Comfort ◽  
Significant Role ◽  
Indoor Environment ◽  
Thermal Sensation ◽  
Climatic Region ◽  
Contributing Factors ◽  
Objective Measurements ◽  
Indoor Thermal Comfort ◽  
Adaptive Comfort

Indoor thermal comfort is an essential aspect of sustainable architecture and it is critical in maintaining a safe indoor environment. Expectations, acceptability, and preferences of traditional and modern buildings are different in terms of thermal comfort. This study, therefore, attempts to evaluate the indoor thermal comforts of modern and traditional buildings and identify the contributing factors that impede or facilitate indoor thermal comfort in Semera city, Ethiopia. This study employed subjective and objective measurements. The subjective measurement is based on the ASHRAE seven-point thermal sensation scale. An adaptive comfort model was employed according to the ASHRAE standard to evaluate indoor thermal comfort. The results revealed that with regards to thermal sensational votes between −1 and +1, 88% of the respondents are satisfied with the indoor environment in traditional houses, while in modern houses this figure is 22%. Likewise, 83% of occupants in traditional houses expressed a preference for their homes to remain the same or be only slightly cooler or warmer. Traditional houses were, on average, in compliance with the 80% acceptability band of the adaptive comfort standard. The study investigated that traditional building techniques and materials, in combination with consideration of microclimate, were found to play a significant role in regulating the indoor environment.

scholarly journals Thermal Comfort Evaluation of Rooms Installed with STPV Windows

Energies ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 808 ◽  
Author(s):  
Hao Tian ◽  
Wei Zhang ◽  
Lingzhi Xie ◽  
Zhichun Ni ◽  
Qingzhu Wei ◽  
...  
Keyword(s):  
Thermal Comfort ◽  
Indoor Environment ◽  
Thermal Sensation ◽  
Test Results ◽  
Test Unit ◽  
Maximum Difference ◽  
Test Rig ◽  
Comfort Evaluation ◽  
The Difference ◽  
Better Than

Thermal comfort is an important aspect to take into consideration for the indoor environment of a building integrated with a semi-transparent Photovoltaics (STPV) system. The thermal comfort of units with photovoltaic windows and that of conventional windows, which is an ordinary without PV, were evaluated via on-site tests and questionnaires. Using the thermal comfort investigation of the test rig, the maximum difference in air temperature was found to be around 5 °C between test unit and comparison unit. The predicted mean vote (PMV)–predicted percentage dissatisfied (PPD) value of the test unit was better than that of the comparison unit. It was observed that on sunny days, the PMV value ranged from 0.2 (nature) to 1.3 (slightly warm) in the test unit, and that of the comparison unit was 0.7 (slightly warm) to 2.0 (warm), thereby providing better thermal comfort, especially during mornings. The maximum difference in PPD values was found to reach 27% between the two units at noon. On cloudy days, the difference was negligible, and the thermal sensation between the foot and the head were almost the same. Fifty respondents were asked to complete a carefully designed questionnaire. The thermal sensation of the test unit was better than that of comparison unit, which corresponded with the test results. Thermal, lighting, acoustic, and other environment comfort scores were combined, and the acceptance of the test unit with the STPV windows was found to be 73.8%. The thermal sensation difference between men and women was around 5%. Thus, during summer, STPV windows can improve the thermal comfort and potentially reduce the air-conditioning load.

scholarly journals Determination of Thermal Comfort in Indoor Sport Facilities Located in Moderate Environments: An Overview

Atmosphere ◽  
2019 ◽  
Vol 10 (12) ◽  
pp. 769 ◽  
Author(s):  
Fabio Fantozzi ◽  
Giulia Lamberti
Keyword(s):  
Thermal Comfort ◽  
Thermal Environment ◽  
Thermal Sensation ◽  
Future Research ◽  
Indoor Environmental Quality ◽  
Indoor Environments ◽  
Major Question ◽  
Sport Practice ◽  
Sport Facilities

In previous years, providing comfort in indoor environments has become a major question for researchers. Thus, indoor environmental quality (IEQ)—concerning the aspects of air quality, thermal comfort, visual and acoustical quality—assumed a crucial role. Considering sport facilities, the evaluation of the thermal environment is one of the main issues that should be faced, as it may interfere with athletes’ performance and health. Thus, the necessity of a review comprehending the existing knowledge regarding the evaluation of the thermal environment and its application to sport facilities becomes increasingly relevant. This paper has the purpose to consolidate the aspects related to thermal comfort and their application to sport practice, through a deep study concerning the engineering, physiological, and psychological approaches to thermal comfort, a review of the main standards on the topic and an analysis of the methodologies and the models used by researchers to determine the thermal sensation of sport facilities’ occupants. Therefore, this review provides the basis for future research on the determination of thermal comfort in indoor sport facilities located in moderate environments.

Modeling the Thermal Comfort of Internal Building Spaces in School

2014 ◽  
Vol 584-586 ◽  
pp. 761-764 ◽  
Author(s):  
Andrey Volkov ◽  
Artem Sedov ◽  
Pavel Chelyshkov ◽  
Ekaterina Kulikova
Keyword(s):  
Thermal Comfort ◽  
Indoor Environment ◽  
Critical Factor ◽  
Thermal Conditions ◽  
Strong Relationship ◽  
Indoor Environmental Quality ◽  
Highly Sensitive ◽  
Materials Used ◽  
Crucial Part

<p class="p0">Creating a comfortable indoor environment has been one of the mainconcerns when it comes to the design and operation of buildings. Buildings are a crucial part of our daily life, on average people spends 85 % of their time performing activities inside of buildings and therefore the quality of the indoor environment is a critical factor affecting the happiness and productivity of building users.The indoor environmental quality has a strong relationship on the thermal conditions of a space which is directly affected by the amount of heat lost or gained due to the properties of the materials used, the external environmental conditions and the inner sources of heat; In consequence, efforts have to be made to maintain proper thermal conditions by means of using natural and mechanical strategies to provide heating, cooling and ventilation. While the thermal comfort is an important aspect for the average user of a building, it becomes a critical aspect when it comes to population highly sensitive to thermal conditions.</p>

Modeling the Thermal Comfort of Internal Building Spaces in Hospital

2014 ◽  
Vol 584-586 ◽  
pp. 753-756 ◽  
Author(s):  
Andrey Volkov ◽  
Artem Sedov ◽  
Pavel Chelyshkov ◽  
Ekaterina Kulikova
Keyword(s):  
Thermal Comfort ◽  
Indoor Environment ◽  
Critical Factor ◽  
Thermal Conditions ◽  
Strong Relationship ◽  
Indoor Environmental Quality ◽  
Operational Conditions ◽  
Hospital Patients ◽  
Materials Used ◽  
Comfort Parameters

<p class="p0">Creating a comfortable indoor environment has been one of the mainconcerns when it comes to the design and operation of buildings. Buildings are a crucial part of our daily life, on average people spends 85 % of their time performing activities inside of buildings and therefore the quality of the indoor environment is a critical factor affecting the happiness and productivity of building users.The indoor environmental quality has a strong relationship on the thermal conditions of a space which is directly affected by the amount of heat lost or gained due to the properties of the materials used, the external environmental conditions and the inner sources of heat; In consequence, efforts have to be made to maintain proper thermal conditions by means of using natural and mechanical strategies to provide heating, cooling and ventilation. While the thermal comfort is an important aspect for the average user of a building, it becomes a critical aspect when it comes to population highly sensitive to thermal conditions. Children under and patients in hospitals with low levels of immune system are more likely to feel discomfort under certain operational conditions of ventilation, cooling and heating delivery systems.Particularly in this study have been investigated the thermal comfort and thermal comfort parameters for children, toddlers and hospital patients in three locations during the typical operation of systems in late spring.</p>

Modeling the Thermal Comfort of Internal Building Spaces in Kindergarten

2014 ◽  
Vol 584-586 ◽  
pp. 757-760 ◽  
Author(s):  
Andrey Volkov ◽  
Artem Sedov ◽  
Pavel Chelyshkov ◽  
Ekaterina Kulikova
Keyword(s):  
Thermal Comfort ◽  
Indoor Environment ◽  
Critical Factor ◽  
Thermal Conditions ◽  
Strong Relationship ◽  
Indoor Environmental Quality ◽  
Highly Sensitive ◽  
Materials Used ◽  
Crucial Part

<p class="p0">Creating a comfortable indoor environment has been one of the mainconcerns when it comes to the design and operation of buildings. Buildings are a crucial part of our daily life, on average people spends 85 % of their time performing activities inside of buildings and therefore the quality of the indoor environment is a critical factor affecting the happiness and productivity of building users.The indoor environmental quality has a strong relationship on the thermal conditions of a space which is directly affected by the amount of heat lost or gained due to the properties of the materials used, the external environmental conditions and the inner sources of heat; In consequence, efforts have to be made to maintain proper thermal conditions by means of using natural and mechanical strategies to provide heating, cooling and ventilation. While the thermal comfort is an important aspect for the average user of a building, it becomes a critical aspect when it comes to population highly sensitive to thermal conditions.</p>

scholarly journals Impact of ventilation system type on indoor thermal environment and human thermal comfort in a ceiling cooling room

2021 ◽  
pp. 277-277
Author(s):  
Xiaozhou Wu ◽  
Genglin Liu ◽  
Jie Gao ◽  
Shuang Wu
Keyword(s):  
Thermal Comfort ◽  
Air Temperature ◽  
Thermal Environment ◽  
Thermal Sensation ◽  
Ventilation System ◽  
Physical Parameters ◽  
Curtain Wall ◽  
Indoor Thermal Environment ◽  
Human Thermal Comfort ◽  
System Type

A ceiling cooling (CC) system integrated with a mechanical ventilation system is an advanced HVAC system for the modern office building with glass curtain wall. In this paper, considering the influence of heat transfer of external envelope, the indoor thermal environment and human thermal comfort were objectively measured and subjectively evaluated in a ceiling cooling room with mixing ventilation (MV) or underfloor air distribution (UFAD). Indoor physical parameters and human skin temperatures were measured as the chilled ceiling surface temperature and supply air temperature were 17.1?C-17.6?C and 22.2?C - 22.6?C. Simultaneously, 16 subjects (8 males and 8 females) were selected to subjectively evaluate the thermal environment. The results showed that the difference between mean radiant temperature and air temperature in the occupied zone was 0.8?C with CC+MV and 1.2?C with CC+UFAD, and the indoor air velocity was 0.17m/s with CC+MV and 0.13m/s with CC+UFAD. In addition, the calculated and measured thermal sensation votes with CC+MV were all slightly less than those with CC+UFAD. Therefore, ventilation system type had a slight impact on the indoor thermal environment and human thermal comfort in the ceiling cooling room.

scholarly journals Experimental and statistical survey on local thermal comfort impact on working productivity loss in university classrooms

2019 ◽  
Vol 23 (1) ◽  
pp. 379-392 ◽  
Author(s):  
Tamara Bajc ◽  
Milos Banjac ◽  
Maja Todorovic ◽  
Zana Stevanovic
Keyword(s):  
Thermal Comfort ◽  
Productivity Loss ◽  
Thermal Conditions ◽  
Co2 Concentration ◽  
Heating System ◽  
Indoor Environmental Quality ◽  
Personal Factor ◽  
Predicted Mean Vote ◽  
Local Thermal Comfort ◽  
The Impact

The paper presents an experimental analysis of the relationship between local thermal comfort and productivity loss in classrooms. The experimental investigation was performed in a real university classroom during the winter semester in city of Belgrade. Measurements were taken for four scenarios, with different indoor comfort conditions. Variations were made by setting the central heating system on/off, adding an additional heat source to provoke higher indoor temperatures, and measuring the radiant asymmetry impact. Innovative questionnaires were developed especially for the research, in order to investigate students? subjective feelings about local thermal comfort and indoor environmental quality. Local predicted mean vote and predicted percentage dissatisfied indices were calculated using data measured in situ. The results were compared to existing models recommended in literature and European and ASHRAE standards. Student productivity was evaluated using novel tests, designed to fit the purposes of the research. Surveys were conducted for 19 days under different thermal conditions, during lectures in a real classroom, using a sample of 240 productivity test results in total. Using the measured data, new correlations between the predicted mean vote, CO2, personal factor and productivity loss were developed. The research findings imply that local thermal comfort is an important factor that can impact productivity, but the impact of the personal factor is of tremendous importance, together with CO2 concentration in the classroom.

Analysis of Thermal Comfort and Microclimatic Conditions in Special Workplaces

2019 ◽  
Author(s):  
Zuzana Kolková ◽  
Peter Hrabovský ◽  
Jozef Matušov
Keyword(s):  
Thermal Comfort ◽  
Indoor Environment ◽  
Operating Conditions ◽  
Working Environment ◽  
Physical Parameters ◽  
Indoor Climate ◽  
Microclimatic Conditions ◽  
Radiant Temperature ◽  
Graphical Presentation

Microclimatic conditions and thermal comfort are important factors in the design of high quality buildings and the quality of working conditions for people in different operations. The importance of thermal comfort in the indoor environment can not be underestimated. A vast majority of complaints about indoor climate relate to poor thermal comfort. This paper presents an analysis of subjective thermal comfort measurement. The experiments were conducted to collect the data in the real conditions. ComfortSense system was used in these experiments. A Humidity and an Operative probe are available together with application software with graphical presentation of results including the Predicted Mean Vote (PMV) and Predicted Percentage Dissatisfied (PPD). The operating conditions are regulated by law in our country. The aim of the legislation is to protect people in the working environment and create appropriate health conditions for them. The goal of a thermal comfort analysis is finding an appropriate function of the physical parameters (background radiant temperature, air temperature, air humidity, wind speed, clothing, metabolic rate, and core temperature), which would yield the corresponding comfort/discomfort level.

scholarly journals Thermal Perception in Mild Climate: Adaptive Thermal Models for Schools

2019 ◽  
Vol 11 (14) ◽  
pp. 3948 ◽  
Author(s):  
Miguel Ángel Campano ◽  
Samuel Domínguez-Amarillo ◽  
Jesica Fernández-Agüera ◽  
Juan José Sendra
Keyword(s):  
Thermal Comfort ◽  
Natural Ventilation ◽  
Energy Use ◽  
Thermal Environment ◽  
Thermal Sensation ◽  
Comfort Level ◽  
Thermal Perception ◽  
Accurate Design ◽  
Almost All ◽  
Autumn And Winter

A comprehensive assessment of indoor environmental conditions is performed on a representative sample of classrooms in schools across southern Spain (Mediterranean climate) to evaluate the thermal comfort level, thermal perception and preference, and the relationship with HVAC systems, with a comparison of seasons and personal clothing. Almost fifty classrooms were studied and around one thousand pool-surveys distributed among their occupants, aged 12 to 17. These measurements were performed during spring, autumn, and winter, considered the most representative periods of use for schools. A new proposed protocol has been developed for the collection and subsequent analysis of data, applying thermal comfort indicators and using the most frequent predictive models, rational (RTC) and adaptive (ATC), for comparison. Cooling is not provided in any of the rooms and natural ventilation is found in most of the spaces during midseasons. Despite the existence of a general heating service in almost all classrooms in the cold period, the use of mechanical ventilation is limited. Heating did not usually provide standard set-point temperatures. However, this did not lead to widespread complaints, as occupants perceive the thermal environment as neutral—varying greatly between users—and show a preference for slightly colder environments. Comparison of these thermal comfort votes and the thermal comfort indicators used showed a better fit of thermal preference over thermal sensation and more reliable results when using regional ATC indicators than the ASHRAE adaptive model. This highlights the significance of inhabitants’ actual thermal perception. These findings provide useful insight for a more accurate design of this type of building, as well as a suitable tool for the improvement of existing spaces, improving the conditions for both comfort and wellbeing in these spaces, as well as providing a better fit of energy use for actual comfort conditions.

Sign in / Sign up

Export Citation Format

Share Document