The Current State of Automated Building Design and Fast-Running Analysis for Vulnerability Studies

Author(s):  
S. A. Minkoff ◽  
J. F. Nichols ◽  
G. Doyle
2021 ◽  
Vol 2042 (1) ◽  
pp. 012122
Author(s):  
M Gkaintatzi-Masouti ◽  
J van Duijnhoven ◽  
M P J Aarts

Abstract Light via our eyes influences visual performance, visual comfort and visual experience, but also affects several health related, non-image-forming (NIF) responses. New metrics have been developed to quantify the NIF effects of light. In order to incorporate these in lighting design practice, simulation tools are required that are able to process information about the spectral distribution of light sources and materials. However, most of the tools currently used for daylight and electric light simulations simplify the spectrum into RGB (Red, Green, Blue) colour values. This paper presents an overview of the currently used programs for simulating the NIF effects of light in building design and discusses the possibility of using existing spectral rendering software as an alternative. A review of literature shows that mostly Radiance or Radiance-based programs have been used so far, but new user-friendly tools could employ existing spectral rendering tools. As the NIF effects of light gain greater importance in lighting design, new simulation workflows are needed. This paper aims to support the development of future workflows by presenting the current state-of-the-art.


Buildings ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 74
Author(s):  
Satheeskumar Navaratnam ◽  
Kate Nguyen ◽  
Kajanan Selvaranjan ◽  
Guomin Zhang ◽  
Priyan Mendis ◽  
...  

The COVID-19 pandemic forced the accessibility, social gathering, lifestyle, and working environment to be changed to reduce the infection. Coronavirus spreads between people in several different ways. Small liquid particles (aerosols, respiratory droplets) from an infected person are transmitted through air and surfaces that are in contact with humans. Reducing transmission through modified heating, ventilation, and air conditioning (HVAC) systems and building design are potential solutions. A comprehensive review of the engineering control preventive measures to mitigate COVID-19 spread, healthy building design, and material was carried out. The current state-of-the-art engineering control preventive measures presented include ultraviolet germicidal irradiation (UVGI), bipolar ionization, vertical gardening, and indoor plants. They have potential to improve the indoor air quality. In addition, this article presents building design with materials (e.g., copper alloys, anti-microbial paintings) and smart technologies (e.g., automation, voice control, and artificial intelligence-based facial recognition) to mitigate the infections of communicable diseases.


2017 ◽  
Vol 35 (4) ◽  
pp. 284-303 ◽  
Author(s):  
Oliver Heidrich ◽  
John Kamara ◽  
Sebastiano Maltese ◽  
Fulvio Re Cecconi ◽  
Mario Claudio Dejaco

Purpose This paper provides a critical review of developments in the adaptability of buildings. The purpose of this paper is to determine the current “state-of-the-art”, describe current thinking and trends in research and practice, and identify issues and gaps that further research can address. It provides a basis for a scientific and practical understanding of the interdependencies across different design criterion. This paper increases the awareness of architects, engineers, clients and users on the importance of adaptability and its role in lowering impacts over the lifecycle of buildings as part of the infrastructure system. Design/methodology/approach This paper draws mainly from the literature as its source of evidence. These were identified from established databases and search engines (e.g. Scopus, ISI Web of Knowledge and Google Scholar) using keywords such as adaptability, adaptable, adaptation, and flexibility. Over 80 sources including books, journal papers, conference proceedings, research reports and doctoral theses covering the period 1990 to 2017 were reviewed and categorised. An inductive approach was used to critically review and categorise these publications and develop a framework for analysis. Findings The concept of adaptability includes many dimensions which can broadly fall into two categories: changes to buildings and user adaptations to buildings. However, previous research has mostly focussed on the former, with many attempts to identify building attributes that facilitate adaptability, and some considerations for its assessment. Key areas that have not been adequately addressed and which require further research include: user/occupant adaptations, cost, benefits and implications of various adaptability measures, and the development of a standardised assessment methodology that could aid in decision making in the design stage of buildings. Research limitations/implications The adaptability strategies considered in this review focussed mainly on building components and systems, and did not include the contribution of intelligent and smart/biological systems. The coverage is further limited in scope due to the period considered (1990-2017) and the exclusion of terms such as “retrofit” and “refurbishment” from the review. However, the findings provide a solid basis for further research in the areas identified above. It identifies research issues and gaps in knowledge between the defined needs and current state-of-the-art on adaptive building for both research and practice. Originality/value This paper is a review of research into a highly topical subject, given the acknowledged need to adapt buildings over their lifecycle to environmental, economic or social changes. It provides further insights on the dimensions of adaptability and identifies areas for further research that will contribute to the development of robust tools for the assessment of building adaptability, which will enhance the decision-making process of building design and the development of a more sustainable built environment.


2018 ◽  
Vol 12 (1) ◽  
pp. 69-86 ◽  
Author(s):  
Elke Miedema ◽  
Göran Lindahl ◽  
Marie Elf

Objective: This review explored different conceptualizations of health promotion in the context of, and in relation to, outpatient building design. Background: Today’s healthcare organizations are implementing holistic healthcare approaches such as health promotion, while simultaneously increasing their outpatient services. These health promotion approaches, focused on empowering people to take control of their health, are expected to have implications for the outpatient healthcare building design. Yet there is limited knowledge what these may be. A review of the literature on the current state of the art is thus needed to enable and support dialog on future healthcare building design. Method: A scoping review of 4,506 papers, collected from four databases and three scientific journals in 2015, resulted in 14 papers relating health promotion to building design and outpatient healthcare. From the subsequent content analysis, multiple common themes and subthemes emerged. Results: The review reveals diverse range of health promotion interpretations, three health promotion perspectives (health behavior, health equity, and sense of coherence), associated design approaches, design objectives, health-related outcomes, building features, and solutions. Conclusions: While diverse health promotion perspectives might merely represent variations in focus, these differences become problematic when relating to building design. To support further dialogs on development of health promotion in, and in relation to, the build environment, there is a need to strengthen the health promotion vocabulary. Further research is needed to compare different design approaches and how these can be combined to minimize contradicting implications for building design.


Author(s):  
Chad McArthur ◽  
Darren Tennant ◽  
Jim Weeks

The current state of practice in the design and assessment of Insulated Glazing Units to resist blast loading utilizes calculation methods to estimate the performance. The most prevalent methods used for calculating the window’s performance have been developed from a single degree of freedom (SDOF) approach. This paper presents an alternative, finite element based, approach to analyzing the blast performance of laminated insulated glazing units. The modeling approach is described for each of the primary components represented in the analysis and the results of an indicative model are compared against an equivalent analysis calculated using SDOF methods.


Author(s):  
G.D. Danilatos

Over recent years a new type of electron microscope - the environmental scanning electron microscope (ESEM) - has been developed for the examination of specimen surfaces in the presence of gases. A detailed series of reports on the system has appeared elsewhere. A review summary of the current state and potential of the system is presented here.The gas composition, temperature and pressure can be varied in the specimen chamber of the ESEM. With air, the pressure can be up to one atmosphere (about 1000 mbar). Environments with fully saturated water vapor only at room temperature (20-30 mbar) can be easily maintained whilst liquid water or other solutions, together with uncoated specimens, can be imaged routinely during various applications.


Author(s):  
C. Barry Carter

This paper will review the current state of understanding of interface structure and highlight some of the future needs and problems which must be overcome. The study of this subject can be separated into three different topics: 1) the fundamental electron microscopy aspects, 2) material-specific features of the study and 3) the characteristics of the particular interfaces. The two topics which are relevant to most studies are the choice of imaging techniques and sample preparation. The techniques used to study interfaces in the TEM include high-resolution imaging, conventional diffraction-contrast imaging, and phase-contrast imaging (Fresnel fringe images, diffuse scattering). The material studied affects not only the characteristics of the interfaces (through changes in bonding, etc.) but also the method used for sample preparation which may in turn have a significant affect on the resulting image. Finally, the actual nature and geometry of the interface must be considered. For example, it has become increasingly clear that the plane of the interface is particularly important whenever at least one of the adjoining grains is crystalline.A particularly productive approach to the study of interfaces is to combine different imaging techniques as illustrated in the study of grain boundaries in alumina. In this case, the conventional imaging approach showed that most grain boundaries in ion-thinned samples are grooved at the grain boundary although the extent of this grooving clearly depends on the crystallography of the surface. The use of diffuse scattering (from amorphous regions) gives invaluable information here since it can be used to confirm directly that surface grooving does occur and that the grooves can fill with amorphous material during sample preparation (see Fig. 1). Extensive use of image simulation has shown that, although information concerning the interface can be obtained from Fresnel-fringe images, the introduction of artifacts through sample preparation cannot be lightly ignored. The Fresnel-fringe simulation has been carried out using a commercial multislice program (TEMPAS) which was intended for simulation of high-resolution images.


2005 ◽  
Vol 41 ◽  
pp. 205-218
Author(s):  
Constantine S. Mitsiades ◽  
Nicholas Mitsiades ◽  
Teru Hideshima ◽  
Paul G. Richardson ◽  
Kenneth C. Anderson

The ubiquitin–proteasome pathway is a principle intracellular mechanism for controlled protein degradation and has recently emerged as an attractive target for anticancer therapies, because of the pleiotropic cell-cycle regulators and modulators of apoptosis that are controlled by proteasome function. In this chapter, we review the current state of the field of proteasome inhibitors and their prototypic member, bortezomib, which was recently approved by the U.S. Food and Drug Administration for the treatment of advanced multiple myeloma. Particular emphasis is placed on the pre-clinical research data that became the basis for eventual clinical applications of proteasome inhibitors, an overview of the clinical development of this exciting drug class in multiple myeloma, and a appraisal of possible uses in other haematological malignancies, such non-Hodgkin's lymphomas.


1995 ◽  
Vol 38 (5) ◽  
pp. 1126-1142 ◽  
Author(s):  
Jeffrey W. Gilger

This paper is an introduction to behavioral genetics for researchers and practioners in language development and disorders. The specific aims are to illustrate some essential concepts and to show how behavioral genetic research can be applied to the language sciences. Past genetic research on language-related traits has tended to focus on simple etiology (i.e., the heritability or familiality of language skills). The current state of the art, however, suggests that great promise lies in addressing more complex questions through behavioral genetic paradigms. In terms of future goals it is suggested that: (a) more behavioral genetic work of all types should be done—including replications and expansions of preliminary studies already in print; (b) work should focus on fine-grained, theory-based phenotypes with research designs that can address complex questions in language development; and (c) work in this area should utilize a variety of samples and methods (e.g., twin and family samples, heritability and segregation analyses, linkage and association tests, etc.).


Sign in / Sign up

Export Citation Format

Share Document