scholarly journals Tissue engineered endometrial barrier exposed to peristaltic flow shear stresses

2020 ◽  
Vol 4 (2) ◽  
pp. 026107
Author(s):  
David Elad ◽  
Uri Zaretsky ◽  
Tatyana Kuperman ◽  
Mark Gavriel ◽  
Mian Long ◽  
...  
Author(s):  
Sayan Mondal ◽  
Chun Yang ◽  
Joseph D. Petruccelli ◽  
Chun Yuan ◽  
Fei Liu ◽  
...  

It has been well-accepted that atherosclerosis initiation and progression correlate positively with low and oscillating flow wall shear stresses. However, this shear stress mechanism cannot fully explain why advanced plaques continue to grow under elevated flow shear stress conditions. Our previous investigations using 3D computational models with fluid-structure interactions (FSI) based on in vivo/ex vivo magnetic resonance images (MRI) of human carotid atherosclerotic plaques indicated that there is a negative correlation between advanced plaque wall thickness and structural maximum principal stress (Stress-P1) in the plaque and a positive correlation between plaque wall thickness and flow shear stress [3].


Author(s):  
Chun Yang ◽  
Gador Canton ◽  
Chun Yuan ◽  
Thomas Hatsukami ◽  
Dalin Tang

It has been well accepted that low and oscillating blood flow shear stresses (LFSS) correlate positively with intimal thickening and atherosclerosis initiation [1,2]. However, the LFSS hypothesis cannot explain why advanced plaques continue to grow under elevated high flow shear stress conditions [3]. For patient tracking studies, plaque progression is often measured by the difference of plaque geometries between two scans (“past” and “current” scans) when medical imaging is used. Mechanical flow shear stress (FSS) and plaque wall stress (PWS) conditions from the two scans may have different correlations with plaque progression. Using 2D structure models based on in vivo magnetic resonance imaging (MRI) human carotid plaques, Tang et al. showed that 18 out of 21 patients had significant negative correlation between plaque progression measured by wall thickness increase (WTI) and plaque wall stress from current scan [3]. The correlation was reversed when plaque wall stress from past scan was used. In this paper, 3D fluid-structure interactions (FSI) models for 32 matched “past-current” scan pairs of human atherosclerotic carotid plaques based on in vivo MRI data were solved and plaque wall stress (PWS) and flow shear stress (FSS) data were obtained to quantify their correlations with plaque progression measured by WTI.


2015 ◽  
Vol 70 (7) ◽  
pp. 513-520 ◽  
Author(s):  
Ehnber Naheed Maraj ◽  
Sohail Nadeem

AbstractThe present work is the mathematical investigation of peristaltic flow of Rabinowitsch fluid in a curved channel. The current problem is modeled and solutions for non-dimensional differential equation are obtained under low Reynolds number and long wavelength approximation. The effects of long lasting non-dimensional parameters on exact solution for velocity profile, pressure rise and shear stresses are studied graphically in the last section. Tables are also incorporated for shear stresses at the walls of the curved channel.


Fluids ◽  
2018 ◽  
Vol 3 (3) ◽  
pp. 56 ◽  
Author(s):  
Hoda Hatoum ◽  
Lakshmi Prasad Dasi

(1) The study’s objective is to assess sinus hemodynamics differences between stenotic native bicuspid aortic valve (BAV) and native tricuspid aortic valve (TrAV) sinuses in order to assess sinus flow shear and vorticity dynamics in these common pathological states of the aortic valve. (2) Representative patient-specific aortic roots with BAV and TrAV were selected, segmented, and 3D printed. The flow dynamics within the sinus were assessed in-vitro using particle image velocimetry in a left heart simulator at physiological pressure and flow conditions. Hemodynamic data calculations, vortex tracking, shear stress probability density functions and sinus washout calculations based on Lagrangian particle tracking were performed. (3) (a) At peak systole, velocity and vorticity in BAV reach 0.67 ± 0.02 m/s and 374 ± 5 s−1 versus 0.49 ± 0.03 m/s and 293 ± 3 s−1 in TrAV; (b) Aortic sinus vortex is slower to form but conserved in BAV sinus; (c) BAV shear stresses exceed those of TrAV (1.05 Pa versus 0.8 Pa); (d) Complete TrAV washout was achieved after 1.5 cycles while it was not for BAV. 4) In conclusion, sinus hemodynamics dependence on the different native aortic valve types and sinus morphologies was clearly highlighted in this study.


2007 ◽  
Vol 30 (4) ◽  
pp. 90 ◽  
Author(s):  
Kenneth A. Myers ◽  
Jerome B. Rattner ◽  
Nigel G. Shrive ◽  
David A. Hart

Introduction: A limited understanding of the cellular mechanisms governing bone mechanotransduction has inhibited the development of clinical treatments for a variety of bone disorders, including osteoporosis, osteoarthritis and microgravity-associated bone atrophy. The cytoskeleton is thought to play a role in cellular mechanotransduction, however the exact mechanism in bone cells has not yet been clearly elucidated. Studies involving cytoskeletal inhibitors have not generally considered secondary effects on cellular organelles such as the primary cilia. These cellular projections could account for the disparity between shear stresses predicted to occur in vivo and the minimum threshold of membrane deformation required to elicit a cellular response in vitro. Methods: MG-63 (human osteoblast-like) cells were cultured in vitro. Cultures were exposed to intermittent cyclic fluid flow shear stress (1 Pa amplitude), for 8 or 12 hrs. Some cultures were loaded in the presence of nocodazole (a microtubule inhibitor) or cytochalasin D (an actin filament inhibitor). The cellular response was analyzed through RT-PCR assessment of messenger RNA levels for specific molecules related to matrix metabolism. The effects of drug treatments on cytoskeletal disorganization and the primary cilia were assessed with immunocytochemistry and electron microscopy. Results: In untreated cultures, shear stress was associated with significant increases in mRNA levels for collagen I and matrix metalloproteinases 1 and 3, for both time points assessed. These increases were maintained in cultures loaded in the presence of cytochalasin D, but were almost completely abrogated in nocodazole-treated cultures. Cytoskeletal inhibitors exerted some dose-dependent effects on length and structure of primary cilia in MG-63 cells. Conclusions: The microtubule network appears to be necessary for some shear-induced responses of osteoblast-like cells. MG-63 cells possess primary cilia, organelles that could amplify fluid flow shear, accounting for some apparent contradictions between studies related to osteoblast mechanosensitivity. Since these structures are composed of microtubules, the observation that microtubule disruptors inhibit the shear response of osteoblast-like cells suggests the primary cilium may have a role in osteoblast mechanotransduction. The effects of cytoskeletal inhibitors on cilium structure may explain the conflicting results of earlier mechanotransduction studies.


TECHNOLOGY ◽  
2016 ◽  
Vol 04 (02) ◽  
pp. 71-79 ◽  
Author(s):  
Y. Alapan ◽  
Y. Matsuyama ◽  
J. A. Little ◽  
U. A. Gurkan

In sickle cell disease (SCD), hemoglobin molecules polymerize intracellularly and lead to a cascade of events resulting in decreased deformability and increased adhesion of red blood cells (RBCs). Decreased deformability and increased adhesion of sickle RBCs lead to blood vessel occlusion (vaso-occlusion) in SCD patients. Here, we present a microfluidic approach integrated with a cell dimensioning algorithm to analyze dynamic deformability of adhered RBC at the single-cell level in controlled microphysiological flow. We measured and compared dynamic deformability and adhesion of healthy hemoglobin A (HbA) and homozygous sickle hemoglobin (HbS) containing RBCs in blood samples obtained from 24 subjects. We introduce a new parameter to assess deformability of RBCs: the dynamic deformability index (DDI), which is defined as the time-dependent change of the cell's aspect ratio in response to fluid flow shear stress. Our results show that DDI of HbS-containing RBCs were significantly lower compared to that of HbA-containing RBCs. Moreover, we observed subpopulations of HbS containing RBCs in terms of their dynamic deformability characteristics: deformable and non-deformable RBCs. Then, we tested blood samples from SCD patients and analyzed RBC adhesion and deformability at physiological and above physiological flow shear stresses. We observed significantly greater number of adhered non-deformable sickle RBCs than deformable sickle RBCs at flow shear stresses well above the physiological range, suggesting an interplay between dynamic deformability and increased adhesion of RBCs in vaso-occlusive events.


Lab on a Chip ◽  
2015 ◽  
Vol 15 (2) ◽  
pp. 429-439 ◽  
Author(s):  
R. Sinha ◽  
S. Le Gac ◽  
N. Verdonschot ◽  
A. van den Berg ◽  
B. Koopman ◽  
...  
Keyword(s):  

A device is reported to screen for the effects on cells of all combinations of five surface strains and five fluid-flow shear stresses, each with four replicates (total 100 units).


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Prasanna Padmanaban ◽  
Ata Chizari ◽  
Tom Knop ◽  
Jiena Zhang ◽  
Vasileios D. Trikalitis ◽  
...  

AbstractFluid flow shear stresses are strong regulators for directing the organization of vascular networks. Knowledge of structural and flow dynamics information within complex vasculature is essential for tuning the vascular organization within engineered tissues, by manipulating flows. However, reported investigations of vascular organization and their associated flow dynamics within complex vasculature over time are limited, due to limitations in the available physiological pre-clinical models, and the optical inaccessibility and aseptic nature of these models. Here, we developed laser speckle contrast imaging (LSCI) and side-stream dark field microscopy (SDF) systems to map the vascular organization, spatio-temporal blood flow fluctuations as well as erythrocytes movements within individual blood vessels of developing chick embryo, cultured within an artificial eggshell system. By combining imaging data and computational simulations, we estimated fluid flow shear stresses within multiscale vasculature of varying complexity. Furthermore, we demonstrated the LSCI compatibility with bioengineered perfusable muscle tissue constructs, fabricated via molding techniques. The presented application of LSCI and SDF on perfusable tissues enables us to study the flow perfusion effects in a non-invasive fashion. The gained knowledge can help to use fluid perfusion in order to tune and control multiscale vascular organization within engineered tissues.


Sign in / Sign up

Export Citation Format

Share Document