scholarly journals Above-room-temperature giant thermal conductivity switching in spintronic multilayers

2021 ◽  
Vol 118 (4) ◽  
pp. 042409
Author(s):  
Hiroyasu Nakayama ◽  
Bin Xu ◽  
Sotaro Iwamoto ◽  
Kaoru Yamamoto ◽  
Ryo Iguchi ◽  
...  
2019 ◽  
Vol 12 (03) ◽  
pp. 1950032 ◽  
Author(s):  
Yuchen Deng ◽  
Yaming Zhang ◽  
Nanlong Zhang ◽  
Qiang Zhi ◽  
Bo Wang ◽  
...  

Pure dense silicon carbide (SiC) ceramics were obtained via the high-temperature physical vapor transport (HTPVT) method using graphite paper as the growth substrate. The phase composition, the evolution of microstructure, the thermal diffusivity and thermal conductivity at RT to 200∘C were investigated. The obtained samples had a relative density of higher than 98.7% and a large grain size of 1[Formula: see text]mm, the samples also had a room-temperature thermal conductivity of [Formula: see text] and with the temperature increased to 200∘C, the thermal conductivity still maintained at [Formula: see text].


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Aastha Vasdev ◽  
Moinak Dutta ◽  
Shivam Mishra ◽  
Veerpal Kaur ◽  
Harleen Kaur ◽  
...  

AbstractA remarkable decrease in the lattice thermal conductivity and enhancement of thermoelectric figure of merit were recently observed in rock-salt cubic SnTe, when doped with germanium (Ge). Primarily, based on theoretical analysis, the decrease in lattice thermal conductivity was attributed to local ferroelectric fluctuations induced softening of the optical phonons which may strongly scatter the heat carrying acoustic phonons. Although the previous structural analysis indicated that the local ferroelectric transition temperature would be near room temperature in $${\text {Sn}}_{0.7}{\text {Ge}}_{0.3}{\text {Te}}$$ Sn 0.7 Ge 0.3 Te , a direct evidence of local ferroelectricity remained elusive. Here we report a direct evidence of local nanoscale ferroelectric domains and their switching in $${\text {Sn}}_{0.7}{\text {Ge}}_{0.3}{\text {Te}}$$ Sn 0.7 Ge 0.3 Te using piezoeresponse force microscopy(PFM) and switching spectroscopy over a range of temperatures near the room temperature. From temperature dependent (250–300 K) synchrotron X-ray pair distribution function (PDF) analysis, we show the presence of local off-centering distortion of Ge along the rhombohedral direction in global cubic $${\text {Sn}}_{0.7}{\text {Ge}}_{0.3}{\text {Te}}$$ Sn 0.7 Ge 0.3 Te . The length scale of the $${\text {Ge}}^{2+}$$ Ge 2 + off-centering is 0.25–0.10 Å near the room temperatures (250–300 K). This local emphatic behaviour of cation is the cause for the observed local ferroelectric instability, thereby low lattice thermal conductivity in $${\text {Sn}}_{0.7}{\text {Ge}}_{0.3}{\text {Te}}$$ Sn 0.7 Ge 0.3 Te .


Author(s):  
Noor Albayati ◽  
Mohammed Kadhom ◽  
Ghassan Abdullah ◽  
Suhaib Salih

Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 583
Author(s):  
Yangyang Pan ◽  
Bo Liang ◽  
Yaran Niu ◽  
Dijuan Han ◽  
Dongdong Liu ◽  
...  

In this study, a new coating material for thermal barrier coating (TBC) or environment barrier coating (EBC) application, Ca3ZrSi2O9 (CZSO), was synthesized and prepared by atmospheric plasma spray (APS) technology. The evolution of the phases and microstructures of the coatings with different thermal-aged were characterized by XRD, XRF, EDS and SEM, respectively. The thermal stability was measured by TG-DTA and DSC. The mechanical and thermal properties, including Vickers hardness (HV), fracture toughness (KIC), thermal conductivity () and coefficient of thermal expansion (CTE) were focused on. It was found that the as-sprayed CZSO coating contained amorphous phase. Crystalline transformation happened at 900–960 ∘C and no mass changes took place from room temperature (RT) to 1300 ∘C. The phenomena of microcrack self-healing and composition uniformity were observed during thermal aging. The of coating was very low at about 0.57–0.80 Wm−1K−1 in 200–1200 ∘C. The combined properties indicated that the CZSO coating might be a potential T/EBC material.


2003 ◽  
Vol 793 ◽  
Author(s):  
Y. Amagai ◽  
A. Yamamoto ◽  
C. H. Lee ◽  
H. Takazawa ◽  
T. Noguchi ◽  
...  

ABSTRACTWe report transport properties of polycrystalline TMGa3(TM = Fe and Ru) compounds in the temperature range 313K<T<973K. These compounds exhibit semiconductorlike behavior with relatively high Seebeck coefficient, electrical resistivity, and Hall carrier concentrations at room temperature in the range of 1017- 1018cm−3. Seebeck coefficient measurements reveal that FeGa3isn-type material, while the Seebeck coefficient of RuGa3changes signs rapidly from large positive values to large negative values around 450K. The thermal conductivity of these compounds is estimated to be 3.5Wm−1K−1at room temperature and decreased to 2.5Wm−1K−1for FeGa3and 2.0Wm−1K−1for RuGa3at high temperature. The resulting thermoelectric figure of merit,ZT, at 945K for RuGa3reaches 0.18.


Author(s):  
Junichiro Shiomi ◽  
Shigeo Maruyama

We report a non-equilibrium molecular dynamics (MD) study on heat conduction of finite-length single-walled carbon nanotubes (SWNTs). The length and diameter dependences of the thermal conductivity are quantified for a range of nanotube-lengths up to a micrometer at room temperature using two different temperature control techniques. A thorough investigation was carried out on the influence of intrinsic thermal boundary resistance between the temperature-controlled layers and the rest of the SWNT. The trend of length effect indicates a gradual transition from nearly pure ballistic phonon transport to diffusive-ballistic phonon transport. The nearly pure ballistic phonon transport was also confirmed by the minor diameter-dependence of thermal conductivity for short SWNTs. For longer SWNTs with stronger diffusive effect, the thermal conductivity is larger for SWNTs with smaller diameters.


MRS Advances ◽  
2016 ◽  
Vol 1 (22) ◽  
pp. 1631-1636 ◽  
Author(s):  
Boya Cui ◽  
D. Bruce Buchholz ◽  
Li Zeng ◽  
Michael Bedzyk ◽  
Robert P. H. Chang ◽  
...  

ABSTRACTThe cross-plane thermal conductivities of InGaZnO (IGZO) thin films in different morphologies were measured on three occasions within 19 months, using the 3ω method at room temperature 300 K. Amorphous (a-), semi-crystalline (semi-c-) and crystalline (c-) IGZO films were grown by pulsed laser deposition (PLD), followed by X-ray diffraction (XRD) for evaluation of film quality and crystallinity. Semi-c-IGZO shows the highest thermal conductivity, even higher than the most ordered crystal-like phase. After being stored in dry low-oxygen environment for months, a drastic decrease of semi-c-IGZO thermal conductivity was observed, while the thermal conductivity slightly reduced in c-IGZO and remained unchanged in a-IGZO. This change in thermal conductivity with storage time can be attributed to film structural relaxation and vacancy diffusion to grain boundaries.


2011 ◽  
Vol 239-242 ◽  
pp. 2756-2759
Author(s):  
Yong Qiang Qin ◽  
Yu Cheng Wu ◽  
Yan Wang ◽  
Yu Hong ◽  
Jing Quan Deng ◽  
...  

Copper and copper alloys had various applications in tremendous areas due to their unique properties, such as good conductivity, good thermal conductivity and so on. However, applications of copper and copper alloys were severely restricted as the result of the limited strength at room temperature and poor wear-resistance at high temperature. In this paper, we investigated the preparation of Cu-Cr-Zr/AlN nanocomposites by mechanical alloying process and then powder metallurgy technology. XRD and SEM were performed for the phase and morphology characterization. The conductivity properties were also tested and the results showed that Cu-Cr-Zr/AlN nanocomposites exhibited excellent conductivity behavior.


2010 ◽  
Vol 150-151 ◽  
pp. 144-149
Author(s):  
Hong Wei Xing ◽  
Jin Song Zhang ◽  
Xiao Ming Cao

Copper matrix composites reinforced with 3D-SiC network (15v% and 20v% SiC) were fabricated by squeezing copper alloy into 3D-SiC network preforms. The thermo-physical properties of the copper matrix composites were investigated. The specific heat capacities of the composites were about 0.39~0.50 J•g-1•K-1. The coefficients of thermal expansion (CTEs) of the composites were found to be lower than 6.9×10-6 -1 at Room Temperature. The composites exhibited high thermal stability for 3D-SiC network advent. The thermal conductivity of the composites was in the range of 50~80W•m−1•K−1. The thermo-physical properties of Cu matrix composites had a great relationship with the structures of 3D-SiC network preforms. The thermal conductivity of the composites decreased with an increase in the volume fraction of SiC or the structures of the limbs changing compacted, but the CTEs were not completely according this rule.


Author(s):  
N. Y. Jagath B. Nikapitiya ◽  
Hyejin Moon

This paper reports an experimental study of thermal conductivity of room temperature ionic liquids (RTILs) based magnetic nanofluids. Various magnetic nanoparticles of metal oxides with high thermal conductivity, such as CuO, Al2O3, Fe3O4 and Carbon Nano Tubes (CNTs), were used to prepare magnetic nanofluids, while RTIL, trihexyl (tetradecyl) posphonium dicyanamide was used as the base fluid. Two major parameters that affect to the thermal conductivity enhancement of fluids were investigated. The effect of particle concentration and external magnetic fields were tested. It was observed that the magnetic nanofluids thermal conductivities increase with increment of particle concentration and external magnetic field parallel to the temperature gradient. Besides, it was observed that under higher magnetic fields, thermal conductivity enhancement tends to approach a saturation state. Surfactant was used to disperse magnetic nanoparticles within the RTILs. The transient hot wire method was used for this investigation.


Sign in / Sign up

Export Citation Format

Share Document