Perception in France of the Australian system for the prediction of beef quality (Meat Standards Australia) with perspectives for the European beef sector

2011 ◽  
Vol 51 (1) ◽  
pp. 30 ◽  
Author(s):  
J. F. Hocquette ◽  
I. Legrand ◽  
C. Jurie ◽  
D. W. Pethick ◽  
D. Micol
Keyword(s):  
Large Scale ◽  
Research Database ◽  
Beef Quality ◽  
Beef Industry ◽  
Critical Control Points ◽  
Weak Points ◽  
Consumer Testing ◽  
Short Time ◽  
Beef Sector ◽  
French Beef

Australia has developed the Meat Standards Australia (MSA) grading scheme to predict beef quality for consumers. This system is comprehensive, accurate and scientifically supported. It is based on the development and the use of a research database with a large amount of data, including the use of a large-scale consumer testing system with cuts cooked in different ways as well as information on the corresponding animals, carcasses and cuts. The system is also based on statistical analyses carried out on this database to identify the critical control points of beef palatability which is indicated for individual muscles and for a specific cooking method and aging time. Experts involved in the French beef industry were questioned about their knowledge and views on the application of the MSA system. They recognised many qualities of the MSA system and it was judged as original, relevant and sufficiently mature in its application, and favouring scientifically based prediction of beef quality rather than replying on tradition and perceptions of quality. It was also thought to be credible, flexible and open ended. However, it was still considered to possess some weak points. Thus, while its development in Australia at the farmer and abattoir level has been impressive in a relatively short time, the final delivery of precise quality grades to consumers is still lacking at retail due to only partial implementation of the system. Its adaptability to France would be difficult due to the complexity of the French beef industry and market. But, the program is uniquely innovative and deserves consideration. It will facilitate awareness and induce much needed changes to underpin the preservation and the development of the beef sector in France and eventually in Europe.

scholarly journals CRC breeding program design, measurements and database: methods that underpin CRC research results

2001 ◽  
Vol 41 (7) ◽  
pp. 943 ◽  
Author(s):  
W. Upton ◽  
H. M. Burrow ◽  
A. Dundon ◽  
D. L. Robinson ◽  
E. B. Farrell
Keyword(s):  
Large Scale ◽  
Research Centre ◽  
Progeny Testing ◽  
Cooperative Research ◽  
Beef Quality ◽  
Beef Industry ◽  
Processing Technologies ◽  
Factors Affecting ◽  
Beef Processing ◽  
Design Generation

The Cooperative Research Centre (CRC) for the Cattle and Beef Industry (Meat Quality) developed an integrated research program to address the major production and processing factors affecting beef quality. Underpinning the integrated program were 2 large-scale progeny testing programs that were used to develop genetic, nutritional, management and beef processing technologies to overcome deficiencies in beef quality. This paper describes the experimental design, generation of experimental cattle and the collection and storage of data derived from these straightbreeding and crossbreeding progeny testing programs.

scholarly journals Evolution of the Meat Standards Australia (MSA) beef grading system

2008 ◽  
Vol 48 (11) ◽  
pp. 1351 ◽  
Author(s):  
R. Polkinghorne ◽  
J. M. Thompson ◽  
R. Watson ◽  
A. Gee ◽  
M. Porter
Keyword(s):  
Research Work ◽  
Strong Support ◽  
The Body ◽  
Eating Quality ◽  
Beef Industry ◽  
Critical Control Points ◽  
Fixed Parameter ◽  
Consumer Testing ◽  
Grading Standards ◽  
Grading Model

The Australian Beef Industry identified variable eating quality as a major contributor to declining beef consumption in the early 1990s and committed research funding to address the problem. The major issue was the ability to predict the eating quality of cooked beef before consumption. The Meat Standards Australia (MSA) program developed a consumer testing protocol, which led to MSA grading standards being defined by consumer score outcomes. Traditional carcass grading parameters proved to be of little value in predicting consumer outcomes. Instead a broader combination of factors forms the basis of an interactive prediction model that performs well. The grading model has evolved from a fixed parameter ‘Pathway’ approach, to a computer model that predicts consumer scores for 135 ‘cut by cooking method’ combinations for each graded carcass. The body of research work conducted in evaluating critical control points and in developing the model predictions and interactions has involved several Australian research groups with strong support and involvement from the industry.

Towards Control of an Estuary

1987 ◽  
Vol 19 (9) ◽  
pp. 155-174
Author(s):  
Henk L. F. Saeijs
Keyword(s):  
Shallow Water ◽  
Storm Surge ◽  
Salt Marshes ◽  
Large Scale ◽  
Western Europe ◽  
Oxygen Depletion ◽  
Negative Effects ◽  
Intertidal Flats ◽  
Environmental Consequences ◽  
Short Time

The Delta Project is in its final stage. In 1974 it was subjected to political reconsideration, but it is scheduled now for completion in 1987. The final touches are being put to the storm-surge barrier and two compartment dams that divide the Oosterschelde into three areas: one tidal, one with reduced tide, and one a freshwater lake. Compartmentalization will result in 13% of channels, 45% of intertidal flats and 59% of salt marshes being lost. There is a net gain of 7% of shallow-water areas. Human interventions with large scale impacts are not new in the Oosterschelde but the large scale and short time in which these interventions are taking place are, as is the creation of a controlled tidal system. This article focusses on the area with reduced tide and compares resent day and expected characteristics. In this reduced tidal part salt marshes will extend by 30–70%; intertidal flats will erode to a lower level and at their edges, and the area of shallow water will increase by 47%. Biomass production on the intertidal flats will decrease, with consequences for crustaceans, fishes and birds. The maximum number of waders counted on one day and the number of ‘bird-days' will decrease drastically, with negative effects for the wader populations of western Europe. The net area with a hard substratum in the reduced tidal part has more than doubled. Channels will become shallower. Detritus import will not change significantly. Stratification and oxygen depletion will be rare and local. The operation of the storm-surge barrier and the closure strategy chosen are very important for the ecosystem. Two optional closure strategies can be followed without any additional environmental consequences. It was essential to determine a clearly defined plan of action for the whole area, and to make land-use choices from the outset. How this was done is briefly described.

scholarly journals Environmental Engineering Techniques to Restore Degraded Posidonia oceanica Meadows

Water ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 661
Author(s):  
Luigi Piazzi ◽  
Stefano Acunto ◽  
Francesca Frau ◽  
Fabrizio Atzori ◽  
Maria Francesca Cinti ◽  
...  
Keyword(s):  
Large Scale ◽  
Natural Habitat ◽  
Cost Benefit ◽  
Cost Effective ◽  
Posidonia Oceanica ◽  
Environmental Engineering ◽  
Bottom Surface ◽  
Sessile Invertebrates ◽  
Set Up ◽  
Short Time

Seagrass planting techniques have shown to be an effective tool for restoring degraded meadows and ecosystem function. In the Mediterranean Sea, most restoration efforts have been addressed to the endemic seagrass Posidonia oceanica, but cost-benefit analyses have shown unpromising results. This study aimed at evaluating the effectiveness of environmental engineering techniques generally employed in terrestrial systems to restore the P. oceanica meadows: two different restoration efforts were considered, either exploring non-degradable mats or, for the first time, degradable mats. Both of them provided encouraging results, as the loss of transplanting plots was null or very low and the survival of cuttings stabilized to about 50%. Data collected are to be considered positive as the survived cuttings are enough to allow the future spread of the patches. The utilized techniques provided a cost-effective restoration tool likely affordable for large-scale projects, as the methods allowed to set up a wide bottom surface to restore in a relatively short time without any particular expensive device. Moreover, the mats, comparing with other anchoring methods, enhanced the colonization of other organisms such as macroalgae and sessile invertebrates, contributing to generate a natural habitat.

scholarly journals Synthesis of Metal Organic Frameworks by Ball-Milling

Crystals ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 15
Author(s):  
Cheng-An Tao ◽  
Jian-Fang Wang
Keyword(s):  
Ball Milling ◽  
Large Scale ◽  
Raw Materials ◽  
Metal Organic Frameworks ◽  
Research Topic ◽  
Mass Ratio ◽  
Time Consumption ◽  
Metal Organic ◽  
Short Time ◽  
Made In

Metal-organic frameworks (MOFs) have been used in adsorption, separation, catalysis, sensing, photo/electro/magnetics, and biomedical fields because of their unique periodic pore structure and excellent properties and have become a hot research topic in recent years. Ball milling is a method of small pollution, short time-consumption, and large-scale synthesis of MOFs. In recent years, many important advances have been made. In this paper, the influencing factors of MOFs synthesized by grinding were reviewed systematically from four aspects: auxiliary additives, metal sources, organic linkers, and reaction specific conditions (such as frequency, reaction time, and mass ratio of ball and raw materials). The prospect for the future development of the synthesis of MOFs by grinding was proposed.

scholarly journals Shift Scheduling of Short Time Workers in Large-Scale Home Improvement Center by using Cooperative Evolution

MENDEL ◽  
2017 ◽  
Vol 23 (1) ◽  
pp. 21-28
Author(s):  
Makoto Ohki
Keyword(s):  
Large Scale ◽  
Shift Scheduling ◽  
Time Zone ◽  
Cooperative Evolution ◽  
Shift Schedule ◽  
Home Improvement ◽  
Mutation Operators ◽  
Break Time ◽  
Working Day ◽  
Short Time

There are a lot of large-scale Home Improvement Center (HIC) in Japan. In the large-scale HIC,about hundred short time workers are registered. And about forty workers are working every day. A managercreates a monthly shift schedule. The manager selects the workers required for each working day, assigns theworking time and break time for each worker and also work placement. Because there are many requirementsfor the scheduling, the scheduling consumes time costs and efforts. Therefore, we propose the technique to createand optimize the schedule of the short time workers in order to reduce the burden of the manager. A cooperativeevolution is applied for generating and optimizing the shift schedule of short time worker. Several problems hasbeen found in carrying out this research. This paper proposes techniques to automatically create and optimize theshift schedule of workers in large-scale HIC by using a Cooperative Evolution (CE), to solve the situation thatmany workers concentrate in a speci c time zone, and to solve the situation where many breaks are concentratedin a speci c break time zone, and an effective mutation operators.

scholarly journals Improving the economic efficiency of oil productionat the “Gazpromneft-Khantos” fields

2021 ◽  
Vol 6 (3) ◽  
pp. 136-143
Author(s):  
Rustam N. Asmandiyarov ◽  
Stanislav Yu. Barkalov ◽  
Rail R. Galeev ◽  
Rustam R. Gumerov ◽  
Yuri A. Katkov ◽  
...  
Keyword(s):  
Economic Efficiency ◽  
Large Scale ◽  
Oil Production ◽  
Project Teams ◽  
Factors Affecting ◽  
Technical And Economic Analysis ◽  
Production Technologies ◽  
The Cross ◽  
Functional Teams ◽  
Short Time

Aim. As part of a large-scale business transformation, Gazprom Neft is implementing new approaches to improving economic efficiency. One of such approaches is the launch of the “Renovation” project program, the purpose of which is to achieve maximum profitability of the basic well stock. The article describes the results of the study and formation of a set of measures to improve the economic efficiency of oil production at the fields of Gazpromneft-Khantos. Materials and methods. The key feature of “Renovation” is that the goal setting and the formation of key performance indicators of project teams are made not from the previously achieved result, but from the potential. To do this, a detailed technical and economic analysis of the factors affecting the profitability of oil production is first carried out, and the potential for increasing profitability is determined. After that, hypotheses are worked out to increase the economic efficiency of production and a set of measures is formed to realize the identified potential. The cross-functional teams of the “Renovation” program projects are formed around the core-team that includes specialists in geology, development, production, engineering, energy management, economics and IT. This allows teams to solve non-standard tasks in a short time, in a complex way, without attracting external leverage, which is an absolute competitive advantage. Results. The program of optimization measures developed by the cross-functional team of the Renovation project will provide the potential for the growth of the profitability of Gazpromneft-Khantos in the period from 2021 to 2030. Conclusions. The article presents the developed and implemented cases on reducing operating costs in various areas — geology and reservoir engineering, energy efficiency, oil production technologies, downhole operations and hydraulic fracturing, oilfield chemistry.

scholarly journals International significance of Australian research on beef quality - a view from the periphery

2001 ◽  
Vol 41 (7) ◽  
pp. 1089 ◽  
Author(s):  
C. E. Devine
Keyword(s):  
Research Effort ◽  
Agricultural Products ◽  
Beef Quality ◽  
Beef Industry ◽  
Significant Component ◽  
Large Numbers ◽  
Current Thinking ◽  
Australian Climate ◽  
The World ◽  
Production Practices

Australia produces agricultural products, including meat, as major items for export as well as being consumed locally. It is no accident that Australia is one of the major exporters of meat to distant markets and the success is predicated on adapting animal production practices and processing to produce a highly desirable product that is safe to eat. Research plays a large part in this strategy, but one would have to say that for some time the view that ‘a prophet hath no honour in his own country’ has predominated. The Cattle and Beef CRC is designed to improve the profitability of the Australian beef industry by bringing in partners, some of whom were prominent in previous research endeavours to coordinate a research effort in order to benefit the whole industry — it is a unique and effective approach. It has taken some time to demonstrate that a ‘nice’ looking animal is not a predictor of meat quality — rather it needs to be processed correctly in order for it to meet the most critical consumer requirements. The researchers in Australia have in fact been the world leaders in advocating procedures such as electrical stimulation that have been taken up by the industry. There are still areas where the research results from Australia differ from that in other countries. CRC-based research in Australia in controlled studies using large numbers of animals with a wide genetic base, has shown that both cattle with a significant component from tropical genotypes and non-tropical genotypes, processed correctly, produce highly acceptable meat. To get further improvements, we merely need to identify the causes of outliers and this should not be difficult. This concept is of course important in the context of the relatively dry Australian climate that results in different problems from other countries. One important outcome of the CRC has been to show that sectors of the industry need to work together to use research and, if necessary, challenge current thinking imposed from outside. In other words, Australians should believe in themselves.

Abnormally long audit report lags and future stock price crash risk: evidence from China

2019 ◽  
Vol 15 (4) ◽  
pp. 611-635
Author(s):  
Ahsan Habib ◽  
Hedy Jiaying Huang
Keyword(s):  
Internal Control ◽  
Stock Price ◽  
Large Scale ◽  
Crash Risk ◽  
Research Database ◽  
Audit Report ◽  
Content Type ◽  
Audit Opinion ◽  
Listed Firms ◽  
International Investors

PurposeAlthough a substantial body of literature investigates the determinants of audit report lag (ARL), scant empirical evidence exists on the consequences of ARL. The purpose of this paper is to examine the association between abnormally long ARL and future stock price crash risk.Design/methodology/approachThis quantitative study employed a large scale (14,445 firm-year observations) of annual financials, audit and ownership information for the Chinese listed companies during 2002–2013 which were retrieved from the China Stock Market and Accounting Research database.FindingsThis study finds evidence that abnormally long ARL increases the risk of a future stock price crash. Furthermore, the study finds that this adverse consequence is more pronounced for firms with a poor internal control environment.Practical implicationsRecently literature started to explore the consequences of abnormal ARL such as going concern audit opinion and restatements in the subsequent periods. This paper reveals that abnormal ARL has consequences for investor wealth losses as well. This is relevant in China, where the ongoing economic growth has attracted, and will continue to attract, a growing body of domestic and international investors. Understanding what factors could expose investors to wealth losses is of paramount importance for allocating their scarce capital.Originality/valueThis study extends the scant literature on the consequences of ARL, and provides useful insights for the Chinese regulatory authorities when considering the appropriateness of the current filing deadline for listed firms.

scholarly journals Co-Operation among Irish Beef Farmers: Current Perspectives and Future Prospects in the Context of New Producer Organisation (PO) Legislation

2018 ◽  
Vol 10 (11) ◽  
pp. 4085
Author(s):  
Hooks Teresa ◽  
Macken-Walsh Áine ◽  
McCarthy Olive ◽  
Power Carol ◽  
Henchion Maeve
Keyword(s):  
Supply Chain ◽  
Lessons Learned ◽  
Beef Industry ◽  
Market Positioning ◽  
Future Success ◽  
Beef Products ◽  
Beef Producers ◽  
Lack Of Commitment ◽  
The Impact ◽  
Beef Sector

Irish beef farms have experienced poor viability longitudinally, with industry and policy actors citing ‘crisis’ levels in 2013. A crucial differentiator between the beef sector and the dairy sector, which has higher farm incomes, is well-developed infrastructure of farmer-owned dairy processing and marketing co-operatives. To address the lack of representative farmer organisations and power imbalances in the beef supply chain, in 2016 the Department of Agriculture Food and the Marine (DAFM) legislated for the establishment of beef Producer Organisations (POs), facilitating beef producers to collectively strengthen their market positioning. While PO legislation is a significant development in potentially enabling supply chain integration of farmers, how the legislation is operationalised by Irish beef industry stakeholders will ultimately shape the nature and breadth of engagement with the PO model and, consequently, the impact of the legislation. In a context where there is little or no prior experience of such organisations in the beef sector, this paper presents an analysis of current stakeholder views in relation to the establishment of POs. Research involved a desk based review of the submissions made during the consultation period for the beef PO legislation and interviews with key informants in the Irish beef industry. We analysed Irish stakeholders’ views through the lens of lessons learned from the existing literature on how POs operate internationally. Results indicate some stakeholders’ perceptions of the need for a nationally coordinated approach in the establishment of an Association of POs, which concurs with the literature. However, stakeholders have not emphasised the benefits of Interbranch Organisations (IBOs), which involve vertical collaboration with other chain actors such as processors and retailers, an approach that has proven successful internationally. Nor have Irish stakeholders identified the potential of differentiating or premiumising beef products, which, according to international evidence, is necessary for improving profitability and farm-level incomes. Stakeholders identified the main threats to the future success of POs in Ireland as members’ lack of commitment and processors’ lack of willingness to engage with POs.

Sign in / Sign up

Export Citation Format

Share Document