An Efficient Venturi Scrubber System to Remove Submicron Particles in Exhaust Gas

Spherical submicron particles of materials produced by electrohydrodynamic (EHD) atomization have been used to study a variety of materials processes including nucleation of alternative crystallization phases in iron-nickel and nickel-chromium alloys, amorphous solidification in submicron droplets of pure metals, and quasi-crystal formation in nickel-chromium alloys. Some experiments on pure nickel, nickel oxide single crystals, the nickel/nickel(II) oxide interface, and grain boundaries in nickel monoxide have been performed by STEM. For these latter studies, HREM is the most direct approach to obtain particle crystal structures at the atomic level. Grain boundaries in nickel oxide have also been investigated by HREM. In this paper, we present preliminary results of HREM observations of NiO growth on submicron spheres of pure nickel.Small particles of pure nickel were prepared by EHD atomization. For the study of pure nickel, 0.5 mm diameter pure nickel wire (99.9975%) is sprayed directly in the EHD process. The liquid droplets solidify in free-flight through a vacuum chamber operated at about 10-7 torr.

Download Full-text

The New Forest Suicide Prevention Initiative (NFSPI)

Crisis ◽

10.1027/0227-5910.26.1.25 ◽

2005 ◽

Vol 26 (1) ◽

pp. 25-33 ◽

Cited By ~ 20

Author(s):

Elizabeth King ◽

Neil Frost

Keyword(s):

Environmental Issues ◽

Exhaust Gas ◽

Telephone Number ◽

Forestry Commission ◽

Car Exhaust ◽

Gas Poisoning ◽

Car Park ◽

Annual Total ◽

New Forest ◽

Car Exhaust Gas

Abstract. A retrospective suicide study revealed that the Forestry Commission car parks in the New Forest in southern England were a previously unrecognized magnet for nonlocal suicides, attracting as high a proportion of “visitors” (35/43 in 1993-97) as among suicides who jumped from the cliffs at the infamous Beachy Head (39/48 in 1993-97). Over 95% of the car park suicides died from car exhaust gas poisoning. A multiagency initiative aimed to reduce the number of suicides in the 140 New Forest car parks where restricting access was impossible, and environmental issues paramount. Signs displaying the Samaritans' national telephone number were erected in the 26 car parks in which 50% of the car park suicides had occurred. Numbers, location, and residence of all car park deaths were monitored for 3 years. Corresponding changes in other forest registration districts were also monitored. During the 3-year intervention period the number of car park suicides fell significantly from 10/year, 1988-1997, to 3.3/year. The average annual total number of suicides in the New Forest registration district also decreased. No significant changes were found in comparable forest districts. The number of suicides in the New Forest car parks remained low during the 2 years following the evaluation.

Download Full-text

CLEANING USED MOTOR OIL FROM MICRON AND SUBMICRON PARTICLES IN SUPERCENTRIFUGE

10.32786/2071-9485-2019-01-35 ◽

2019 ◽

Keyword(s):

Submicron Particles ◽

Motor Oil ◽

Used Motor Oil

Download Full-text

Recovering waste energy of the combined gas turbine system using paraffin melting

JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES ◽

10.15282/jmes.14.4.2020.15.0589 ◽

2020 ◽

Vol 14 (4) ◽

pp. 7481-7497

Author(s):

Yousef Najjar ◽

Abdelrahman Irbai

Keyword(s):

Melting Process ◽

Payback Period ◽

Energy Utilization ◽

Raw Material ◽

Heat Transfer Fluid ◽

Layered System ◽

Exhaust Gas ◽

Gas Temperature ◽

Power Cycle ◽

Waste Energy

This work covers waste energy utilization of the combined power cycle by using it in the candle raw material (paraffin) melting process and an economic study for this process. After a partial utilization of the burned fuel energy in a real bottoming steam power generation, the exhaust gas contains 0.033 of the initially burned energy. This tail energy with about 128 ºC is partly driven in the heat exchanger of the paraffin melting system. Ansys-Fluent Software was used to study the paraffin wax melting process by using a layered system that utilizes an increased interface area between the heat transfer fluid (HTF) and the phase change material (PCM) to improve the paraffin melting process. The results indicate that using 47.35 kg/s, which is 5% of the entire exhaust gas (881.33 kg/s) from the exit of the combined power cycle, would be enough for producing 1100 tons per month, which corresponds to the production quantity by real candle's factories. Also, 63% of the LPG cost will be saved, and the payback period of the melting system is 2.4 years. Moreover, as the exhaust gas temperature increases, the consumed power and the payback period will decrease.

Download Full-text