scholarly journals Role of stress fiber-like structures in assembling nascent myofibrils in myosheets recovering from exposure to ethyl methanesulfonate.

1986 ◽  
Vol 102 (4) ◽  
pp. 1464-1479 ◽  
Author(s):  
P B Antin ◽  
S Tokunaka ◽  
V T Nachmias ◽  
H Holtzer
Keyword(s):  
Electron Microscopy ◽  
Sarcoplasmic Reticulum ◽  
Intermediate Filaments ◽  
Alkylating Agent ◽  
Temporal Correlation ◽  
Stress Fiber ◽  
Ethyl Methanesulfonate ◽  
Myosin Isoforms ◽  
Thick Filaments

When day 1 cultures of chick myogenic cells were exposed to the mutagenic alkylating agent ethyl methanesulfonate (EMS) for 3 d, 80% of the replicating cells were killed, but postmitotic myoblasts survived. The myoblasts fused to form unusual multinucleated "myosheets": extraordinarily wide, flattened structures that were devoid of myofibrils but displayed extensive, submembranous stress fiber-like structures (SFLS). Immunoblots of the myosheets indicated that the carcinogen blocked the synthesis and accumulation of the myofibrillar myosin isoforms but not that of the cytoplasmic myosin isoform. When removed from EMS, widely spaced nascent myofibrils gradually emerged in the myosheets after 3 d. Striking co-localization of fluorescent reagents that stained SFLS and those that specifically stained myofibrils was observed for the next 2 d. By both immunofluorescence and electron microscopy, individual nascent myofibrils appeared to be part of, or juxtaposed to, preexisting individual SFLS. By day 6, all SFLS had disappeared, and the definitive myofibrils were displaced from their submembranous site into the interior of the myosheet. Immunoblots from recovering myosheets demonstrated a temporal correlation between the appearance of the myofibrillar myosin isoforms and the assembly of thick filaments. The assembly of definitive myofibrils did not appear to involve desmin intermediate filaments, but a striking aggregation of sarcoplasmic reticulum elements was seen at the level of each I-Z-band. Our findings suggest that SFLS in the EMS myosheets function as early, transitory assembly sites for nascent myofibrils.

Aldolase-localization in cultured cells: Cell-type and substrate-specific regulation of cytoskeletal associations

2001 ◽  
Vol 79 (6) ◽  
pp. 719-728 ◽  
Author(s):  
Ralf Schindler ◽  
Elke Weichselsdorfer ◽  
Oliver Wagner ◽  
Jürgen Bereiter-Hahn
Keyword(s):  
Electron Microscopy ◽  
Intermediate Filaments ◽  
Actin Polymerization ◽  
Cultured Cells ◽  
Actin Binding ◽  
Permeabilized Cells ◽  
Specific Regulation ◽  
Actin Fibrils ◽  
Fructose 1,6 Bisphosphate

The role of aldolase as a true F- and G-actin binding protein, including modulating actin polymerization, initiating bundling, and giving rise to supramolecular structures that emanate from actin fibrils, has been established using indirect immunofluorescence, permeabilization of XTH-2 cells and keratocytes, and microinjection of fluorescence-labeled aldolase. In addition, binding to intermediate filaments, vimentin, and cytokeratins has been demonstrated. In permeabilized cells in the presence of fructose-1,6-bisphosphate (20–2000 µM) aldolase shifts from association with actin fibres to intermediate filaments. Plenty of free binding sites on microtubules have been revealed by addition of fluorochromed aldolase derived from rabbit skeletal muscle. However, endogenous aldolase was never found associated with microtubules. Differences in actin polymerization in the presence of aldolase as revealed by pyrene-labeled actin fluorimetry and viscosimetry were explained by electron microscopy showing the formation of rod-like structures (10 nm wide, 20–60 nm in length) by association of aldolase with G-actin, which prevents further polymerization. Upon the addition of fructose-1,6-bisphosphate, G-actin–aldolase mixture polymerizes to a higher viscosity and forms stiffer filaments than pure actin of the same concentration.Key words: aldolase, cytoskeleton, electron microscopy, viscosimetry.

scholarly journals The alteration of myosin isoform compartmentation in specific mutants of Caenorhabditis elegans.

1986 ◽  
Vol 103 (3) ◽  
pp. 985-993 ◽  
Author(s):  
H F Epstein ◽  
I Ortiz ◽  
L A Mackinnon
Keyword(s):  
Electron Microscopy ◽  
Caenorhabditis Elegans ◽  
Body Wall ◽  
Thick Filament ◽  
Polar Regions ◽  
Myosin Isoforms ◽  
Intrinsic Properties ◽  
Specific Antibodies ◽  
Thick Filaments ◽  
Filament Protein

Myosin isoforms A and B are located at the surface of the central and polar regions, respectively, of thick filaments in body muscle cells of Caenorhabditis elegans, whereas paramyosin and a distinct core structure comprise the backbones of these filaments. Thick filaments and related structures were isolated from nematode mutants that have altered thick filament protein compositions. These mutant filaments and their complexes with specific antibodies were studied by electron microscopy to determine the distribution of the two myosins. The compartmentation of the two myosin isoforms in body wall muscle thick filaments depends not only upon the intrinsic properties of the myosins but their interactions with other components such as paramyosin and their relative quantities determined by synthesis.

scholarly journals OBLIQUELY STRIATED MUSCLE

1968 ◽  
Vol 36 (1) ◽  
pp. 245-259 ◽  
Author(s):  
Jack Rosenbluth
Keyword(s):  
Electron Microscopy ◽  
Sarcoplasmic Reticulum ◽  
Connective Tissue ◽  
Striated Muscle ◽  
Muscle Cells ◽  
Body Muscle ◽  
Dense Bodies ◽  
Thick Filaments ◽  
Predominant Type ◽  
Physiological Differences

Body muscle cells of the bloodworm Glycera, a polychaete annelid, were studied by electron microscopy and compared with muscle cells of the more slowly acting nematode Ascaris, which have been described previously. Both muscles are obliquely striated. The predominant type of bloodworm fiber is characterized by a prominent transversely oriented sarcoplasmic reticulum with numerous dyads at the surface of each cell. Thick myofilaments are ∼3 µ long and overlap along ∼60% of their length in extended fibers and ∼80% in shortened fibers. There is virtually no endomysium and very little intracellular skeleton, and the cells are attached by desmosomes to one another rather than to connective tissue. Dense bodies are absent from the fibers and in their place are Z lines, which are truly linear rather than planar. Scattered among the predominant fibers are others, less orderly in arrangement, in which the SR is much less prominent and in which the thick filaments are thicker and longer and overlap to an even smaller degree. It is suggested that physiological differences between bloodworm and Ascaris muscles derive from differences in the proportion of series to parallel linkages between the contractile elements, differences in the amount and disposition of the SR, and differences in the impedance to shear within the myofibrils.

Electron Microscopy of Metal-Matrix Composites

1970 ◽  
Vol 28 ◽  
pp. 404-405
Author(s):  
A. Lawley ◽  
M. R. Pinnel ◽  
A. Pattnaik
Keyword(s):  
Electron Microscopy ◽  
Metal Matrix Composites ◽  
Metal Matrix ◽  
Critical Evaluation ◽  
Elastic Behavior ◽  
Matrix Composites ◽  
Directionally Solidified ◽  
Fracture Characteristics ◽  
Broad Program

As part of a broad program on composite materials, the role of the interface on the micromechanics of deformation of metal-matrix composites is being studied. The approach is to correlate elastic behavior, micro and macroyielding, flow, and fracture behavior with associated structural detail (dislocation substructure, fracture characteristics) and stress-state. This provides an understanding of the mode of deformation from an atomistic viewpoint; a critical evaluation can then be made of existing models of composite behavior based on continuum mechanics. This paper covers the electron microscopy (transmission, fractography, scanning microscopy) of two distinct forms of composite material: conventional fiber-reinforced (aluminum-stainless steel) and directionally solidified eutectic alloys (aluminum-copper). In the former, the interface is in the form of a compound and/or solid solution whereas in directionally solidified alloys, the interface consists of a precise crystallographic boundary between the two constituents of the eutectic.

Site of Lysosome Production During Hepatic Injury

1969 ◽  
Vol 27 ◽  
pp. 348-349
Author(s):  
Nalin J. Unakar
Keyword(s):  
Electron Microscopy ◽  
Golgi Apparatus ◽  
Mouse Liver ◽  
Hepatic Injury ◽  
Close Approximation ◽  
Experimental Conditions ◽  
Toxic Injury

The increased number of lysosomes as well as the close approximation of lysosomes to the Golgi apparatus in tissue under variety of experimental conditions is commonly observed. These observations suggest Golgi involvement in lysosomal production. The role of the Golgi apparatus in the production of lysosomes in mouse liver was studied by electron microscopy of liver following toxic injury by CCI4.

On Future Directions in Pathology

1982 ◽  
Vol 40 ◽  
pp. 274-277
Author(s):  
Benjamin F. Trump ◽  
Irene K. Berezesky ◽  
Raymond T. Jones
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Clinical Pathology ◽  
Future Directions ◽  
Diagnostic Pathology ◽  
The Past ◽  
Transmission Electron ◽  
Organ Systems ◽  
The Many

The role of electron microscopy and associated techniques is assured in diagnostic pathology. At the present time, most of the progress has been made on tissues examined by transmission electron microscopy (TEM) and correlated with light microscopy (LM) and by cytochemistry using both plastic and paraffin-embedded materials. As mentioned elsewhere in this symposium, this has revolutionized many fields of pathology including diagnostic, anatomic and clinical pathology. It began with the kidney; however, it has now been extended to most other organ systems and to tumor diagnosis in general. The results of the past few years tend to indicate the future directions and needs of this expanding field. Now, in addition to routine EM, pathologists have access to the many newly developed methods and instruments mentioned below which should aid considerably not only in diagnostic pathology but in investigative pathology as well.

Transmission Electron Microscopy studies of texture of Cr underlayer of magnetic recording hard disk

1991 ◽  
Vol 49 ◽  
pp. 580-581
Author(s):  
L. Tang ◽  
G. Thomas ◽  
M. R. Khan ◽  
S. L. Duan
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Transmission Electron Microscopy ◽  
Magnetic Recording ◽  
Magnetic Thin Films ◽  
Magnetic Films ◽  
Substrate Bias ◽  
Epitaxial Relationship ◽  
Transmission Electron

Cr thin films are often used as underlayers for Co alloy magnetic thin films, such as Co1, CoNi2, and CoNiCr3, for high density longitudinal magnetic recording. It is belived that the role of the Cr underlayer is to control the growth and texture of the Co alloy magnetic thin films, and, then, to increase the in plane coercivity of the films. Although many epitaxial relationship between the Cr underlayer and the magnetic films, such as ﹛1010﹜Co/ {110﹜Cr4, ﹛2110﹜Co/ ﹛001﹜Cr5, ﹛0002﹜Co/﹛110﹜Cr6, have been suggested and appear to be related to the Cr thickness, the texture of the Cr underlayer itself is still not understood very well. In this study, the texture of a 2000 Å thick Cr underlayer on Nip/Al substrate for thin films of (Co75Ni25)1-xTix dc-sputtered with - 200 V substrate bias is investigated by electron microscopy.

Analytical electron microscopy of grain boundaries in Al-Cu metallizations

1992 ◽  
Vol 50 (2) ◽  
pp. 1684-1685
Author(s):  
J. R. Michael ◽  
A. D. Romig ◽  
D. R. Frear
Keyword(s):  
Electron Microscopy ◽  
Integrated Circuits ◽  
Failure Mode ◽  
Current Density ◽  
Thermal History ◽  
Analytical Electron Microscopy ◽  
Cu Metallization ◽  
Analytical Electron ◽  
Interconnect Lines

Al with additions of Cu is commonly used as the conductor metallizations for integrated circuits, the Cu being added since it improves resistance to electromigration failure. As linewidths decrease to submicrometer dimensions, the current density carried by the interconnect increases dramatically and the probability of electromigration failure increases. To increase the robustness of the interconnect lines to this failure mode, an understanding of the mechanism by which Cu improves resistance to electromigration is needed. A number of theories have been proposed to account for role of Cu on electromigration behavior and many of the theories are dependent of the elemental Cu distribution in the interconnect line. However, there is an incomplete understanding of the distribution of Cu within the Al interconnect as a function of thermal history. In order to understand the role of Cu in reducing electromigration failures better, it is important to characterize the Cu distribution within the microstructure of the Al-Cu metallization.

The use of scanning electron microscopy in interpreting chenopodium remains from three archaeological sites in northwestern Iowa

1992 ◽  
Vol 50 (2) ◽  
pp. 1112-1113
Author(s):  
Douglas William Jones
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Archaeological Sites ◽  
Late Prehistoric ◽  
Eastern United States ◽  
Chenopodium Berlandieri ◽  
Seed Identification ◽  
Level 2 ◽  
Scanning Electron

Within the past 20 years, archaeobotanical research in the Eastern United States has documented an early agricultural complex before the dominance of the Mesoamerican domesticates (corn, beans, and squash) in late prehistoric and historic agricultural systems. This early agricultural complex consisted of domesticated plants such as Iva annua var.macrocarpa (Sumpweed or Marshelder), Hellanthus annuus (Sunflower) and Chenopodium berlandieri, (Goosefoot or Lasbsquarters), and heavily utilized plants such as Polygonum erectum (Erect Knotweed), Phalaris caroliniana (May grass), and Hordeum pusillum (Little Barley).Recent research involving the use of Scanning Electron Microscopy (SEM) specifically on Chenopodium has established diagnostic traits of wild and domesticated species seeds. This is important because carbonized or uncarbonized seeds are the most commonly recovered Chenopodium material from archaeological sites. The diagnostic seed traits assist archaeobotanists in identification of Chenopodium remains and provide a basis for evaluation of Chenopodium utilization in a culture's subsistence patterns. With the aid of SEM, an analysis of Chenopodium remains from three Late Prehistoric sites in Northwest Iowa (Blood Run [Oneota culture], Brewster [Mill Creek culture], and Chan-Ya-Ta [Mill Creek culture]) has been conducted to: 1) attempt seed identification to a species level, 2) evaluate the traits of the seeds for classification as either wild or domesticated, and 3) evaluate the role of Chenopodium utilization in both the Oneota and Mill Creek cultures.

Sign in / Sign up

Export Citation Format

Share Document