scholarly journals Band gap states in nanocrystalline WO3thin films studied by soft x-ray spectroscopy and optical spectrophotometry

2016 ◽  
Vol 28 (47) ◽  
pp. 475802 ◽  
Author(s):  
M B Johansson ◽  
P T Kristiansen ◽  
L Duda ◽  
G A Niklasson ◽  
L Österlund
Keyword(s):  
Band Gap ◽  
X Ray ◽  
Gap States ◽  
Optical Spectrophotometry

scholarly journals Vacuum-Free and Highly Dense Nanoparticle Based Low-Band-Gap CuInSe2 Thin-Films Manufactured by Face-to-Face Annealing with Application of Uniaxial Mechanical Pressure

Coatings ◽  
2019 ◽  
Vol 9 (8) ◽  
pp. 484
Author(s):  
Matthias Schuster ◽  
Dominik Stapf ◽  
Tobias Osterrieder ◽  
Vincent Barthel ◽  
Peter J. Wellmann
Keyword(s):  
Thin Films ◽  
Band Gap ◽  
Coarse Grained ◽  
High Porosity ◽  
Low Band Gap ◽  
Seeding Layer ◽  
X Ray ◽  
Face To Face ◽  
Copper Indium ◽  
Vis Spectroscopy

Copper indium gallium sulfo-selenide (CIGS) based solar cells show the highest conversion efficiencies among all thin-film photovoltaic competition. However, the absorber material manufacturing is in most cases dependent on vacuum-technology like sputtering and evaporation, and the use of toxic and environmentally harmful substances like H2Se. In this work, the goal to fabricate dense, coarse grained CuInSe2 (CISe) thin-films with vacuum-free processing based on nanoparticle (NP) precursors was achieved. Bimetallic copper-indium, elemental selenium and binary selenide (Cu2−xSe and In2Se3) NPs were synthesized by wet-chemical methods and dispersed in nontoxic solvents. Layer-stacks from these inks were printed on molybdenum coated float-glass-substrates via doctor-blading. During the temperature treatment, a face-to-face technique and mechanically applied pressure were used to transform the precursor-stacks into dense CuInSe2 films. By combining liquid phase sintering and pressure sintering, and using a seeding layer later on, issues like high porosity, oxidation, or selenium- and indium-depletion were overcome. There was no need for external Se atmosphere or H2Se gas, as all of the Se was directly in the precursor and could not leave the face-to-face sandwich. All thin-films were characterized with scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and UV/vis spectroscopy. Dense CISe layers with a thickness of about 2–3 µm and low band gap energies of 0.93–0.97 eV were formed in this work, which show potential to be used as a solar cell absorber.

Energy Band Gap Studies of CdS Nanomaterials

2008 ◽  
Vol 3 ◽  
pp. 97-102 ◽  
Author(s):  
Dinu Patidar ◽  
K.S. Rathore ◽  
N.S. Saxena ◽  
Kananbala Sharma ◽  
T.P. Sharma
Keyword(s):  
Optical Absorption ◽  
Band Gap ◽  
Energy Band ◽  
Chemical Method ◽  
Optical Absorption Spectroscopy ◽  
Cds Nanoparticles ◽  
X Ray Diffraction ◽  
Energy Band Gap ◽  
X Ray ◽  
Simple Chemical

The CdS nanoparticles of different sizes are synthesized by a simple chemical method. Here, CdS nanoparticles are grown through the reaction of solution of different concentration of CdCl2 with H2S. X-ray diffraction pattern confirms nano nature of CdS and has been used to determine the size of particle. Optical absorption spectroscopy is used to measure the energy band gap of these nanomaterials by using Tauc relation. Energy band gap ranging between 3.12 eV to 2.47 eV have been obtained for the samples containing the nanoparticles in the range of 2.3 to 6.0 nm size. A correlation between the band gap and size of the nanoparticles is also established.

Enhanced visible-active photocatalytic behaviors observed in Mn-doped BiFeO3

2018 ◽  
Vol 32 (17) ◽  
pp. 1850185 ◽  
Author(s):  
Yun-Hui Si ◽  
Yu Xia ◽  
Ya-Yun Li ◽  
Shao-Ke Shang ◽  
Xin-Bo Xiong ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Band Gap ◽  
Diffuse Reflectance Spectroscopy ◽  
X Ray Diffraction ◽  
Electron Hole ◽  
X Ray ◽  
Mn Doped ◽  
Hole Recombination ◽  
Narrow Band Gap Semiconductors

A series of BiFeO3 and BiFe[Formula: see text]Mn[Formula: see text]O3 (x = 0, 0.02, 0.04, 0.06, 0.08, 0.10) were synthesized by a hydrothermal method. The samples were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy (EDS) and UV–Vis diffuse reflectance spectroscopy, and their photocatalytic activity was studied by photocatalytic degradation of methylene blue in aqueous solution under visible light irradiation. The band gap of BiFeO3 was significantly decreased from 2.26 eV to 1.90 eV with the doping of Mn. Furthermore, the 6% Mn-doped BiFeO3 photocatalyst exhibited the best activity with a degradation rate of 94% after irradiation for 100 min. The enhanced photocatalytic activity with Mn doping could be attributed to the enhanced optical absorption, increment of surface reactive sites and reduction of electron–hole recombination. Our results may be conducive to design more efficient photocatalysts responsive to visible light among narrow band gap semiconductors.

scholarly journals Effect of Dopant Concentration on the Structural, Optical and Sensing Properties of (SnO2)1-x(TiO2:CuO)x Sprayed Films

2019 ◽  
Vol 16 (2) ◽  
pp. 0361
Author(s):  
Mahmood Et al.
Keyword(s):  
Optical Properties ◽  
Band Gap ◽  
Energy Band ◽  
Spray Pyrolysis Technique ◽  
Single Crystal Silicon ◽  
Dielectric Constants ◽  
Energy Band Gap ◽  
Crystal Silicon ◽  
X Ray ◽  
Regular Manner

      Spray pyrolysis technique was subjected to synthesized (SnO2)1-x (TiO2: CuO) x Thin films on different substrates like glass and single crystal silicon using. The structure of the deposited films was studied using x-ray diffraction. A more pronounced diffraction peaks of SnO2 while no peaks of (CuO , TiO2 ) phase appear in the X-ray profiles by increasing of the content of (TiO2 , CuO) in the sprayed films. Mixing concentration (TiO2 , CuO) influences on the size of the crystallites of the SnO2 films ,the size of crystallites of the spray paralyzed oxide films change in regular manner by increasing of (TiO2 , CuO) amount. The effect of mixing concentration on the optical properties of the films was also investigated. The reflectance and transmittance spectra  in the wavelength range (300-1100) nm were employed to determine the optical properties such as energy band gap (Eg) and refractive index (n),  extinction coefficient  (k) , real and imaginary parts of dielectric constants (ε1, ε2) for (SnO2)1-x(TiO2:CuO)x films. The energy band gap omit of which showed reduction from (3.65 to 2.2) eV by reducing of SnO2 amount from (100 to 70) % .The reduction of energy band gap was ascribed to the new tail states introduced in the band gap of tin oxide. The sensitivity of the prepared sensor film was determined resistance difference of the films when exposed to oxidizing gas. The data declared that the mixed SnO2 films have better sensitivity in comparison with unmixed films.

scholarly journals Size and Concentration Determination of Colloidal Nanocrystals by Small-Angle X-Ray Scattering

2018 ◽  
Author(s):  
Jorick Maes ◽  
Nicolo Castro ◽  
Kim De Nolf ◽  
Willem Walravens ◽  
Benjamin Abécassis ◽  
...  
Keyword(s):  
Band Gap ◽  
Small Angle ◽  
Accurate Determination ◽  
Band Gap Energy ◽  
Colloidal Nanocrystals ◽  
X Ray ◽  
Absolute Scale ◽  
X Ray Scattering ◽  
Ray Scattering

<div> <div> <div> <p>The accurate determination of the dimensions of a nano-object is paramount to the de- velopment of nanoscience and technology. Here, we provide procedures for sizing quasi- spherical colloidal nanocrystals (NCs) by means of small-angle x-ray scattering (SAXS). Using PbS NCs as a model system, the protocols outline the extraction of the net NC SAXS pattern by background correction and address the calibration of scattered x-ray intensity to an absolute scale. Different data analysis methods are compared, and we show that they yield nearly identical estimates of the NC diameter in the case of a NC ensemble with a monodisperse and monomodal size distribution. Extending the analysis to PbSe, CdSe </p> </div> </div> <div> <div> <p>and CdS NCs, we provide SAXS calibrated sizing curves, which relate the NC diameter and the NC band-gap energy as determined using absorbance spectroscopy. In compari- son with sizing curves calibrated by means of transmission electron microscopy (TEM), we systematically find that SAXS calibration assigns a larger diameter than TEM calibration to NCs with a given band gap. We attribute this difference to the difficulty of accurately sizing small objects in TEM images. To close, we demonstrate that NC concentrations can be directly extracted from SAXS patterns normalized to an absolute scale, and we show that SAXS-based concentrations agree with concentration estimates based on absorption spectroscopy.</p></div></div></div>

scholarly journals Characterization of CuO/n-Si heterojunction solar cells produced by thermal evaporation

2018 ◽  
Vol 36 (4) ◽  
pp. 668-674 ◽  
Author(s):  
Reşit Özmenteş ◽  
Cabir Temirci ◽  
Abdullah Özkartal ◽  
Kadir Ejderha ◽  
Nezir Yildirim
Keyword(s):  
Solar Cells ◽  
Band Gap ◽  
Thermal Evaporation ◽  
Front Surface ◽  
Band Gap Energy ◽  
Monoclinic Crystal ◽  
Photovoltaic Properties ◽  
X Ray ◽  
Heterojunction Solar Cells ◽  
Monoclinic Crystal Structure

AbstractCopper(II) oxide (CuO) in powder form was evaporated thermally on the front surface of an n-Si (1 0 0) single crystal using a vacuum coating unit. Structural investigation of the deposited CuO film was made using X-ray difraction (XRD) and energy dispersive X-ray analysis (EDX) techniques. It was determined from the obtained results that the copper oxide films exhibited single-phase CuO properties in a monoclinic crystal structure. Transmittance measurement of the CuO film was performed by a UV-Vis spectrophotometer. Band gap energy of the film was determined as 1.74 eV under indirect band gap assumption. Current-voltage (I-V) measurements of the CuO/n-Si heterojunctions were performed under illumination and in the dark to reveal the photovoltaic and electrical properties of the produced samples. From the I-V measurements, it was revealed that the CuO/n-Si heterojunctions produced by thermal evaporation exibit excellent rectifying properties in dark and photovoltaic properties under illumination. Conversion efficiencies of the CuO/n-Si solar cells are comparable to those of CuO/n-Si produced by other methods described in the literature.

scholarly journals Flexible ZnO photoelectrode for photo electrochemical energy conversion

2021 ◽  
Author(s):  
T. Shiyani ◽  
Indrani Banerjee ◽  
Santosh K. Mahapatra ◽  
Asim K Ray
Keyword(s):  
Band Gap ◽  
Diffraction Pattern ◽  
Absorption Spectra ◽  
Optical Band Gap ◽  
Solar Fuels ◽  
Photoelectrochemical Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
A Value ◽  
Pet Substrate

Abstract Photoelectrochemical properties have been investigated for flexible ZnO/ITO/PET photoelectrodes. ZnO was spin coated on ITO/PET substrate with thickness of about 310 nm. The high crystalline structure of ZnO was studied using x-ray diffraction pattern. A value of 3.4 eV has been estimated for optical band gap from its absorption spectra. The flexible ZnO photoelectrode was demonstrated to generate photoelectrochemical current. Values of 1.022 and 0.714 were found to be for photo switching and photoresponsivity, respectively. ZnO/ITO/PET can be used as a substrate for making flexible hybrid PEC devices to generate solar power and solar fuels.

scholarly journals Effect of Re and Tm-site on morphology structure and optical band gap of ReTmO3 (Re: La, Ce, Nd, Gd, Dy, Y and Tm: Fe, Cr) prepared by sol-gel method

2018 ◽  
Vol 64 (4) ◽  
pp. 381
Author(s):  
Muhammad Tufiq Jamil ◽  
Javed Ahmad ◽  
Syed Hamad Bukhari ◽  
Murtaza Saleem
Keyword(s):  
Band Gap ◽  
Sol Gel ◽  
Xrd Analysis ◽  
Sem Analysis ◽  
X Ray Diffraction ◽  
Orthorhombic Crystal ◽  
X Ray ◽  
Average Grain Size ◽  
Auto Combustion ◽  
Uv Visible

Rare earth nano sized pollycrystalline orthoferrites and orthocromites ReT mO3 (Re = La, Nd, Gd, Dy, Y and T m = Fe, Cr) have been synthesized by sol-gel auto combustion citrate method. The samples have been characterized by means of X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX), and UV-visible spectroscopy. The samples are single phase as confirmed by XRD analysis and correspond to the orthorhombic crystal symmetry with space group pbnm. Debye Scherer formula and Williamson Hall analysis have been used to calculate the average grain size which is consistent with that of determined from SEM analysis and varied between 25-75 nm. The elemental compositions of all samples have been checked by EDX analysis. Different crystallographic parameters are calculated with strong structural correlation among Re and Tm sites. The optical energy band gap has been calculated by using Tauc relation estimated to be in the range of 1.77 - 1.87 eV and 2.77 - 3.14 eV, for ReFeO3 and ReCrO3, respectively.

Sign in / Sign up

Export Citation Format

Share Document