scholarly journals Improvement of the technological process of sowing sunflower seeds with a pneumatic seed planter

2021 ◽  
Vol 845 (1) ◽  
pp. 012136
Author(s):  
N P Kryuchin ◽  
A P Gorbachev
Keyword(s):  
Uniform Distribution ◽  
Technological Process ◽  
Coefficient Of Variation ◽  
3D Model ◽  
General Scheme ◽  
Sunflower Seeds ◽  
Seed Material

Abstract The article provides the objectives for the need to study the influence of the shaper on the seed velocity, as well as the influence of the arrangement of its rods on the grain speed at the outlet of the seed flow shaper. The general scheme of the seed flow shaper, its description, 3D model and its arrangement on the seeder are given in the article. It also describes the method of measuring the velocity of seed material. As a result of the study, the dependence of the velocity of sunflower seeds on the distance of the placement of rods, as well as the velocity of grains without a flow shaper, is presented. It was found that as the distance between the axes of the rods increases from 5 to 30 mm, the seed velocity at the outlet from the diffuser increases insignificantly, being in the range of 3.2 – 2.7 m/s. The results of using the seed flow shaper of the proposed design on the seed line of the Amazone DMC Primera pneumatic seed planter for sunflower sowing are also presented. As a result of the assessment of the uniform distribution of plants in rows by seedlings, it was concluded that the quality of seeding improved, the coefficient of variation of intervals between plants was 61.2 and 78.4% with and without the use of a shaper, respectively.

scholarly journals Justification of the rotary working body for soil cultivation when fertilizing in the garden

2021 ◽  
Vol 845 (1) ◽  
pp. 012129
Author(s):  
A V Alyokhin ◽  
V I Gorshenin ◽  
M S Koldin ◽  
I A Drobyshev
Keyword(s):  
Uniform Distribution ◽  
Technological Process ◽  
Soil Structure ◽  
Experimental Studies ◽  
Agricultural Technology ◽  
Soil Cultivation ◽  
Theoretical Substantiation ◽  
Working Surface ◽  
Made In

Abstract The paper considers the effect of milling the soil for fertilizing with the ability to obtain a soil structure, in which there will be a uniform distribution of fertilizers for their more active assimilation. The device of the rotary working body for the implementation of this technological process is presented. The theoretical substantiation of the curvilinear working surface of the knife is carried out to obtain the optimal structure of the soil. The dependence of the shape of the knife working surface on the parameter of the parabola p is plotted. The results of experimental studies are given. It was concluded that the quality of soil cultivation required by agricultural technology by this working body with a knife working surface made in a parabola was obtained with a parameter p = 2.5.

CONTROL IN REAL TIME THE DENSITY OF PRODUCT AT VARIOUS STAGES OF THE TECHNOLOGICAL PROCESS OF SUGAR PRODUCTION

2020 ◽  
Author(s):  
S.B. Kudryashev ◽  
◽  
N.S. Assev ◽  
R.D. Belashov ◽  
V.A. Naumenko ◽  
...  
Keyword(s):  
Real Time ◽  
Technological Process ◽  
Sugar Industry ◽  
Sugar Production ◽  
Production Processes ◽  
Quality Of Products

The article is devoted to solving one of the most important problems of the development of the sugar industry in Russia – the modernization of sugar production processes. Today, sugar production is actively being modernized, shifting most of its processes to the path of avomatization and optimization to improve the quality of products. This article describes one of the main ways to obtain information about the concentration of sucrose in syrup in the production of sugar.

MODIFYING THE TECHNOLOGICAL PROCESS OF A HAULM TOPPER TO IMPROVE THE QUALITY OF TABLE POTATO

2018 ◽  
pp. 7-12
Author(s):  
АNDREI B. KALININ ◽  
◽  
IGOR Z. TEPLINSKY ◽  
ОLEG V. SMELIK ◽  
ALEKSANDRA А. MANOKHINA ◽  
...  
Keyword(s):  
Technological Process

scholarly journals A Simulation Model of Construction Projects Executed in Random Conditions with the Overlapping Construction Works

2021 ◽  
Vol 13 (11) ◽  
pp. 5795
Author(s):  
Sławomir Biruk ◽  
Łukasz Rzepecki
Keyword(s):  
Simulation Model ◽  
Technological Process ◽  
Construction Projects ◽  
Working Time ◽  
Simulation Studies ◽  
Construction Methods ◽  
The Impact ◽  
Construction Works

Reducing the duration of construction works requires additional organizational measures, such as selecting construction methods that assure a shorter realization time, engaging additional resources, working overtime, or allowing construction works to be performed simultaneously in the same working units. The simultaneous work of crews may affect the quality of works and the efficiency of construction processes. This article presents a simulation model aimed at assessing the impact of the overlap period on the extension of the working time of the crews and the reduction of a repetitive project’s duration in random conditions. The purpose of simulation studies is to provide construction managers with guidelines when deciding on the dates of starting the sequential technological process lines realized by specialized working crews, for sustainable scheduling and organization of construction projects.

Precision separation process of sunflower seeds

2021 ◽  
pp. 117-126
Keyword(s):  
Sunflower Seed ◽  
Low Complexity ◽  
Functional Dependencies ◽  
Sunflower Seeds ◽  
Technological Parameters ◽  
Automated Control ◽  
Separation Processes ◽  
Individual Measurement ◽  
Seed Material ◽  
Automatic Phenotyping

According to the requirements for the technological processes of purification and separation of the seed mixture to obtain the sunflower seed material of the parent components (varietal purity – 98,0-99,9%) for all parts of the breeding and seed production process, a rational precision technological scheme of the separation processes has been developed, which includes automation of technical processes of separation means. In order to increase the efficiency of the sunflower breeding and seed-growing process, a device for automatic seed phenotyping has been added to the developed technological line, which can significantly intensify and shorten the breeding process and improve the design of the breeding program through bioinformatic data analysis and seed sorting. Functional dependencies are established and methods of automated control of precision mechanized process of seed separation are developed on the basis of coordination of its mode and technological parameters. Tape device for automatic phenotyping of sunflower seed material according to its morphological and marker features have been developed. The device are configured for high accuracy of individual measurement of the geometric dimensions of sunflower seeds with determination of their shape and color and provide low complexity and high technological implementation of the phenotyping process (determination, identification and separation) of seeds.

scholarly journals Simulation of rod vibrations process with an independent pendular suspension and vertical stabilization system

2018 ◽  
Vol 56 (4) ◽  
pp. 469-480
Author(s):  
I. S. Kruk ◽  
A. A. Tiunchik ◽  
V. Romanyuk
Keyword(s):  
Technological Process ◽  
Initial Conditions ◽  
Vertical Movement ◽  
Design Stage ◽  
Geometrical Parameters ◽  
Stabilization System ◽  
Special Approach ◽  
Rod Structures ◽  
Design And Testing

Continuous improvement of field sprayer design aimed at performance increase by increasing the working width, requires a special approach to ensure reliability of the supporting rod structure and quality of technological process. The question of rod vibrations, which arise when the driving systems copy field rough surface and abrupt changes in speed of the unit, remains topical. At the design stage of supporting structures of the rods, special attention is paid to the substantiation of its geometrical parameters in the longitudinal and transverse sections; studies of changes in the characteristics of vertical and horizontal vibrations, taking into account the method of the rod hanging and the system used for its stabilization. This allows to ensure the reliability of the rod design and the required quality of the technological process. The article proposes construction of the rod independent pendulum suspension on the sprayer frame and its stabilization system based on the use of damping elements. The analytical studies sequence system was developed for rod vibrations analysis, depending on initial conditions, parameters and characteristics of the used damping elements, under which they are effectively damped. It is shown that at certain numerical values of the geometrical parameters of the rod, the suspension and vibrations damping methods, not only the numerical values of the functions are changed, but also the functions themselves that describe the process of the rod's vertical movement, including cases of resonance. The obtained theoretical results can be used for design and testing of machines with rod working units and allow, at design stages, to simulate the process of movement of various rod structures from external excitatory forces, and to determine patterns of changes in the characteristics of damped vibrations using different damping elements and their installation parameters.

scholarly journals ESTIMATION OF STRUCTURAL SIMILARITY FOR CONTROL OF MICROELECTRONIC PRODUCTS

2019 ◽  
Vol 1 (7) ◽  
pp. 14-18
Author(s):  
Yu. A. Gusman ◽  
Yu. A. Pichugin ◽  
A. O. Smirnov
Keyword(s):  
Production Process ◽  
Technological Process ◽  
Good Reason ◽  
Structural Similarity ◽  
Fixed Number ◽  
Crystal Plate ◽  
Technological Scheme ◽  
Real Sample ◽  
Numerical Example

In this paper we consider the technological process of manufacturing micromechanical gyroscopes, the output of which is divided into cells of the crystal plate and each cell contains a fixed number of product elements. The estimation of structural similarity for measurements of technical characteristics of various devices is offered. A relatively large value of structural similarity assessment means that there is a dependence of the quality of the manufactured devices on the position on the crystal plate. This gives a good reason for further work to improve the quality of the process or to change the technological scheme as a whole. The article considers a numerical example based on a real sample of microelectronic products. The proposed method can be used both in the process of adjustment of the production process and in the rejection of products, when further configuration of the equipment is no longer possible.

scholarly journals Influence of working pressure and spray nozzle on the distribution of spray liquid in manual backpack sprayers

2019 ◽  
Vol 86 ◽  
Author(s):  
Alcides Marangoni Junior ◽  
Marcelo da Costa Ferreira
Keyword(s):  
Coefficient Of Variation ◽  
Spray Nozzle ◽  
Hollow Cone ◽  
Distribution Profile ◽  
Working Pressure ◽  
Spray Solution ◽  
Phytosanitary Treatment ◽  
Spray Distribution ◽  
Distribution Uniformity

ABSTRACT Manual backpack sprayers are widely used in rural properties in Brazil. However, studies that assess their working characteristics, especially spray tip models and working pressure conditions, are scarce. Thus, the aim of this study was to assess how much the working pressure and spray tips influence the distribution quality of phytosanitary spray solutions in manual backpack sprayers. Four spray nozzles (standard flat-fan Magnojet TP11002, turbo flat-fan TeeJet TT11002, hollow-cone TeeJet TXA8002, and disc-core) were assessed in a patternator table at 1, 2, 3, and 4 bar. Analyses of spray distribution profile were performed by symmetry and the coefficient of variation (CV) analysed by the Tukey’s test (p < 0.05). Spray tip models and working pressure influenced in more than 100% the distribution uniformity values of spray solution and in about 50% the useful range of the phytosanitary treatment. Among the models assessed in this study, the turbo flat-fan spray nozzle presents the best set of characteristics to be indicated for manual backpack sprayers aiming at field phytosanitary treatments.

scholarly journals ECONOMIC COST-EFFECTIVENES OF ETHYLENE CONSUMPTION IN THE TECHNOLOGICAL PROCESS OF BANANA RIPENING

2021 ◽  
Vol 1 (24) ◽  
Author(s):  
Ivan Stojanović ◽  
Aleksandar Manić ◽  
Silvana Ilić
Keyword(s):  
Treatment Period ◽  
Technological Process ◽  
Economic Cost ◽  
Maturity Level ◽  
Ethylene Concentration ◽  
Ripening Process ◽  
Ethylene Consumption ◽  
Climacteric Fruit ◽  
Reduced Costs

Banana is a climacteric fruit that undergoes a ripening process in airtight chambers at a certain temperature, appropriate ethylene concentration, and the time it takes for the fruit to reach maturity level 4 on the ripening scale. For commercial purposes an ethylene concentration of 1000 ppm is used, and depending on other factors the concentration may vary. Through a research the best result has been achieved with an ethylene concentration of 900 ppm and the fruit exposure to 18C for a treatment period of 120 h. These parameters reduced costs by RSD 91.896,95 at annual level compared to the commercial concentration of ethylene, the quality of the fruit did not deteriorate greater efficiency in business has been achieved.

Sign in / Sign up

Export Citation Format

Share Document