scholarly journals Assessment of the Miller cycle operation in a spark ignition engine via 1D numerical simulation

2022 ◽  
Vol 960 (1) ◽  
pp. 012014
Author(s):  
P Punov ◽  
M Niculae ◽  
A Clenci ◽  
S. Mihalkov ◽  
V Iorga-Siman ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Cfd Simulation ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Miller Cycle ◽  
Intake Valve ◽  
Volumetric Expansion ◽  
Current Context ◽  
1D Numerical Simulation ◽  
The Impact

Abstract The article presents the results of a 1D numerical simulation of a spark ignition engine developed to operate in Miller cycle. Miller cycle offers better thermal efficiency compared to Otto cycle due to higher volumetric expansion than compression, which in the current context is of paramount importance. In an engine with fixed geometric compression ratio, Miller cycle operation could be realized by means of either early intake valve closing (EIVC) or late intake valve closing (LIVC). Both cases lead however to a lower volumetric efficiency, thus reducing the indicating mean effective pressure, which in its turn results to a lower power output. The simulation’s aim is not only to assess the impact of implementing the Miller cycle but also to obtain the necessary results for imposing the boundary conditions in a 3D CFD simulation whose purpose is to analyse the influence of the Miller cycle on the internal aerodynamics of the engine.

scholarly journals Ethanol/Gasoline Blends as Alternative Fuel in Last Generation Spark-Ignition Engines: A Review on CO and HC Engine Out Emissions

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 4034
Author(s):  
Paolo Iodice ◽  
Massimo Cardone
Keyword(s):  
Physicochemical Properties ◽  
Alternative Fuels ◽  
Experimental Studies ◽  
Alternative Fuel ◽  
Exhaust Emissions ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Spark Ignition Engines ◽  
The Impact

Among the alternative fuels existing for spark-ignition engines, ethanol is considered worldwide as an important renewable fuel when mixed with pure gasoline because of its favorable physicochemical properties. An in-depth and updated investigation on the issue of CO and HC engine out emissions related to use of ethanol/gasoline fuels in spark-ignition engines is therefore necessary. Starting from our experimental studies on engine out emissions of a last generation spark-ignition engine fueled with ethanol/gasoline fuels, the aim of this new investigation is to offer a complete literature review on the present state of ethanol combustion in last generation spark-ignition engines under real working conditions to clarify the possible change in CO and HC emissions. In the first section of this paper, a comparison between physicochemical properties of ethanol and gasoline is examined to assess the practicability of using ethanol as an alternative fuel for spark-ignition engines and to investigate the effect on engine out emissions and combustion efficiency. In the next section, this article focuses on the impact of ethanol/gasoline fuels on CO and HC formation. Many studies related to combustion characteristics and exhaust emissions in spark-ignition engines fueled with ethanol/gasoline fuels are thus discussed in detail. Most of these experimental investigations conclude that the addition of ethanol with gasoline fuel mixtures can really decrease the CO and HC exhaust emissions of last generation spark-ignition engines in several operating conditions.

Experimental research on pumping losses and combustion performance in an unthrottled spark ignition engine

2018 ◽  
Vol 232 (7) ◽  
pp. 888-897 ◽  
Author(s):  
Tingting Sun ◽  
Yingjie Chang ◽  
Zongfa Xie ◽  
Kaiyu Zhang ◽  
Fei Chen ◽  
...  
Keyword(s):  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Valve Lift ◽  
Combustion Characteristic ◽  
Spark Ignition Engines ◽  
Intake Valve ◽  
Valve System ◽  
Combustion Performance ◽  
Intake Swirl ◽  
Variable Valve

A novel fully hydraulic variable valve system is described in this paper, which achieves continuous variations in maximum valve lift, valve opening duration, and the timing of valve closing. The load of the unthrottled spark ignition engine with fully hydraulic variable valve system is controlled by using an early intake valve closing rather than the conventional throttle valve. The experiments were carried out on BJ486EQ spark ignition engine with fully hydraulic variable valve system. Pumping losses of the throttled and unthrottled spark ignition engines at low-to-medium loads are compared and the reason of it decreasing significantly in the unthrottled spark igntion engine is analyzed. The combustion characteristic parameters, such as cyclic variation, CA50, and heat release rate, were analyzed. The primary reasons for the lower combustion rate in the unthrottled spark ignition engines are discussed. In order to improve the evaporation of fuel and mix with air in an unthrottled spark ignition engine, the in-cylinder swirl is organized with a helical intake valve, which can generate a strong intake swirl at low intake valve lifts. The effects of the intake swirl on combustion performance are investigated. Compared with the throttled spark ignition engine, the brake specific fuel consumption of the improved unthrottled spark ignition engine is reduced by 4.1% to 11.2%.

Simulation of Extended Expansion Lean Burn Spark Ignition Engine

2004 ◽  
Author(s):  
A. Manivannan ◽  
R. Ramprabhu ◽  
P. Tamilporai ◽  
S. Chandrasekaran
Keyword(s):  
Heat Transfer ◽  
Compression Ratio ◽  
Thermal Efficiency ◽  
Numerical Study ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Valve Closure ◽  
Intake Valve ◽  
Lean Burn ◽  
Atkinson Cycle

This paper deals with Numerical Study of 4-stoke, Single cylinder, Spark Ignition, Extended Expansion Lean Burn Engine. Engine processes are simulated using thermodynamic and global modeling techniques. In the simulation study following process are considered compression, combustion, and expansion. Sub-models are used to include effect due to gas exchange process, heat transfer and friction. Wiebe heat release formula was used to predict the cylinder pressure, which was used to find out the indicated work done. The heat transfer from the cylinder, friction and pumping losses also were taken into account to predict the brake mean effective pressure, brake thermal efficiency and brake specific fuel consumption. Extended Expansion Engine operates on Otto-Atkinson cycle. Late Intake Valve Closure (LIVC) technique is used to control the load. The Atkinson cycle has lager expansion ratio than compression ratio. This is achieved by increasing the geometric compression ratio and employing LIVC. Simulation result shows that there is an increase in thermal efficiency up to a certain limit of intake valve closure timing. Optimum performance is attained at 90 deg intake valve closure (IVC) timing further delaying the intake valve closure reduces the engine performance.

scholarly journals An Attempt to Reduce the Emission of Spark-Ignition Engine with Mixtures of Bioethanol and Gasoline as Substitute Fuels

2019 ◽  
Vol 26 (3) ◽  
pp. 31-38
Author(s):  
Wojciech Gis ◽  
Maciej Gis ◽  
Piotr Wiśniowski ◽  
Mateusz Bednarski
Keyword(s):  
Carbon Dioxide ◽  
Fuel Consumption ◽  
Carbon Dioxide Emissions ◽  
Alternative Fuels ◽  
Negative Impact ◽  
Spark Ignition ◽  
Solid Particles ◽  
Spark Ignition Engine ◽  
Maximum Power ◽  
The Impact

Abstract Limiting emissions of harmful substances is a key task for vehicle manufacturers. Excessive emissions have a negative impact not only on the environment, but also on human life. A significant problem is the emission of nitrogen oxides as well as solid particles, in particular those up to a diameter of 2.5 microns. Carbon dioxide emissions are also a problem. Therefore, work is underway on the use of alternative fuels to power the vehicle engines. The importance of alternative fuels applies to spark ignition engines. The authors of the article have done simulation tests of the Renault K4M 1.6 16v traction engine for emissions for fuels with a volumetric concentration of bioethanol from 10 to 85 percent. The analysis was carried out for mixtures as substitute fuels – without doing any structural changes in the engine's crankshafts. Emission of carbon monoxide, carbon dioxide, hydrocarbons, oxygen at full throttle for selected rotational speeds as well as selected engine performance parameters such as maximum power, torque, hourly and unit fuel consumption were determined. On the basis of the simulation tests performed, the reasonableness of using the tested alternative fuels was determined on the example of the drive unit without affecting its constructions, in terms of e.g. issue. Maximum power, torque, and fuel consumption have also been examined and compared. Thus, the impact of alternative fuels will be determined not only in terms of emissions, but also in terms of impact on the parameters of the power unit.

scholarly journals LES study on mixing and combustion in a Direct Injection Spark Ignition engine

2018 ◽  
Vol 73 ◽  
pp. 32
Author(s):  
Nicolas Iafrate ◽  
Anthony Robert ◽  
Jean-Baptiste Michel ◽  
Olivier Colin ◽  
Benedicte Cuenot ◽  
...  
Keyword(s):  
Ignition Time ◽  
Direct Injection ◽  
Combustion Process ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Pollutant Emissions ◽  
Spark Ignition Engines ◽  
Eddy Simulation ◽  
Mixture Preparation ◽  
The Impact

Downsized spark ignition engines coupled with a direct injection strategy are more and more attractive for car manufacturers in order to reduce pollutant emissions and increase efficiency. However, the combustion process may be affected by local heterogeneities caused by the interaction between the spray and turbulence. The aim for car manufacturers of such engine strategy is to create, for mid-to-high speeds and mid-up-high loads, a mixture which is as homogeneous as possible. However, although injection occurs during the intake phase, which favors homogeneous mixing, local heterogeneities of the equivalence ratio are still observed at the ignition time. The analysis of the mixture preparation is difficult to perform experimentally because of limited optical accesses. In this context, numerical simulation, and in particular Large Eddy Simulation (LES) are complementary tools for the understanding and analysis of unsteady phenomena. The paper presents the LES study of the impact of direct injection on the mixture preparation and combustion in a spark ignition engine. Numerical simulations are validated by comparing LES results with experimental data previously obtained at IFPEN. Two main analyses are performed. The first one focuses on the fuel mixing and the second one concerns the effect of the liquid phase on the combustion process. To highlight these phenomena, simulations with and without liquid injection are performed and compared.

A comparative study of the effect of compression ratio on the efficiency and flame development angle in a Cooperative Fuel Research engine fueled with binary gasoline–alcohol blends

2019 ◽  
pp. 146808741985910 ◽  
Author(s):  
Guillermo Rubio-Gómez ◽  
Lis Corral-Gómez ◽  
David Rodriguez-Rosa ◽  
Fausto A Sánchez-Cruz ◽  
Simón Martínez-Martínez
Keyword(s):  
Comparative Study ◽  
Compression Ratio ◽  
Alternative Fuels ◽  
Internal Combustion Engines ◽  
Fossil Fuels ◽  
Combustion Process ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Flame Development ◽  
The Impact

In the last few years, increasing concern about the harmful effects of the use of fossil fuels in internal combustion engines has been observed. In addition, the limited availability of crude oil has driven the interest in alternative fuels, especially biofuels. In the context of spark ignition engines, bioalcohols are of great interest owing to their similarities and blend capacities with gasoline. Methanol and ethanol have been widely used, mainly due to their knocking resistance. Another alcohol of great interest is butanol, thanks to its potential of being produced as biofuel and its heat value closer to gasoline. In this study, a comparative study of gasoline–alcohol blend combustion, with up to 20% volume, with neat gasoline has been carried out. A single-cylinder, variable compression ratio, Cooperative Fuel Research-type spark ignition engine has been employed. The comparison is made in terms of fuel conversion efficiency and flame development angle. Relevant information related to the impact in the combustion process of the use of the three main alcohols used in blends with gasoline has been obtained.

Sign in / Sign up

Export Citation Format

Share Document