scholarly journals Enhancement Tensile Strength, Creep Resistance and Hardness of an Epoxy Resin by Adding SiO2 Nanoparticles

2021 ◽  
Vol 1094 (1) ◽  
pp. 012142
Author(s):  
Safaa A Al-Shawi ◽  
Luay S Alansari ◽  
Abbas Ali Diwan ◽  
Aseel Alkhatat
Keyword(s):  
Tensile Strength ◽  
Epoxy Resin ◽  
Creep Resistance ◽  
Sio2 Nanoparticles

scholarly journals The Influence of Mixing Methods of Epoxy Composition Ingredients on Selected Mechanical Properties of Modified Epoxy Construction Materials

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 411
Author(s):  
Izabela Miturska ◽  
Anna Rudawska ◽  
Miroslav Müller ◽  
Monika Hromasová
Keyword(s):  
Tensile Strength ◽  
Epoxy Resin ◽  
Construction Materials ◽  
Preliminary Heating ◽  
Epoxy Composition ◽  
Mixing Speed ◽  
Adhesive Composition ◽  
Adhesive Compositions ◽  
The Matrix ◽  
Level Of Significance

The proper process of preparing an adhesive composition has a significant impact on the degree of dispersion of the composition ingredients in the matrix, as well as on the degree of aeration of the resulting composition, which in turn directly affects the strength and functional properties of the obtained adhesive compositions. The paper presents the results of tensile strength tests and SEM microphotographs of the adhesive composition of Epidian 57 epoxy resin with Z-1 curing agent, which was modified using three fillers NanoBent ZR2 montmorillonite, CaCO3 calcium carbonate and CWZ-22 active carbon. For comparison purposes, samples made of unmodified composition were also tested. The compositions were prepared with the use of six mixing methods, with variable parameters such as type of mixer arm, deaeration and epoxy resin temperature. Then, three mixing speeds were applied: 460, 1170 and 2500 rpm. The analyses of the obtained results showed that the most effective tensile results were obtained in the case of mixing with the use of a dispersing disc mixer with preliminary heating of the epoxy resin to 50 °C and deaeration of the composition during mixing. The highest tensile strength of adhesive compositions was obtained at the highest mixing speed; however, the best repeatability of the results was observed at 1170 rpm mixing speed. Based on a comparison test of average values, it was observed that, in case of modified compositions, the values of average tensile strength obtained at mixing speeds at 1170 and 2500 rpm do not differ significantly with the assumed level of significance α = 0.05.

scholarly journals Enhanced Tensile Strength of Monolithic Epoxy with Highly Dispersed TiO2-Graphene Nanocomposites

2021 ◽  
Vol 5 (7) ◽  
pp. 191
Author(s):  
Yanshuai Wang ◽  
Siyao Guo ◽  
Biqin Dong ◽  
Feng Xing
Keyword(s):  
Tensile Strength ◽  
Epoxy Resin ◽  
Mechanical Performance ◽  
Chemical Properties ◽  
High Mechanical Property ◽  
Graphene Nanocomposites ◽  
Highly Dispersed ◽  
Dispersion State ◽  
Physical And Chemical

The functionalization of graphene has been reported widely, showing special physical and chemical properties. However, due to the lack of surface functional groups, the poor dispersibility of graphene in solvents strongly limits its engineering applications. This paper develops a novel green “in-situ titania intercalation” method to prepare a highly dispersed graphene, which is enabled by the generation of the titania precursor between the layer of graphene at room temperature to yield titania-graphene nanocomposites (TiO2-RGO). The precursor of titania will produce amounts of nano titania between the graphene interlayers, which can effectively resist the interfacial van der Waals force of the interlamination in graphene for improved dispersion state. Such highly dispersed TiO2-RGO nanocomposites were used to modify epoxy resin. Surprisingly, significant enhancement of the mechanical performance of epoxy resin was observed when incorporating the titania-graphene nanocomposites, especially the improvements in tensile strength and elongation at break, with 75.54% and 176.61% increases at optimal usage compared to the pure epoxy, respectively. The approach presented herein is easy and economical for industry production, which can be potentially applied to the research of high mechanical property graphene/epoxy composite system.

scholarly journals Effects of Substitution of Y with Yb and Ce on the Microstructures and Mechanical Properties of Mg88.5Zn5Y6.5

Metals ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 31
Author(s):  
Hongxin Liao ◽  
Taekyung Lee ◽  
Jiangfeng Song ◽  
Jonghyun Kim ◽  
Fusheng Pan
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Tensile Strength ◽  
Ultimate Tensile Strength ◽  
Yield Strength ◽  
Creep Resistance ◽  
Room Temperature ◽  
High Thermal Stability ◽  
Long Period ◽  
Microstructures And Mechanical Properties

The microstructures and mechanical properties of the Mg88.5Zn5Y6.5-XREX (RE = Yb and Ce, X = 0, 1.5, 3.0, and 4.5) (wt.%) alloys were investigated in the present study. Mg88.5Zn5Y6.5 is composed of three phases, namely, α-Mg, long-period stacking ordered (LPSO) phases, and intermetallic compounds. The content of the LPSO phases decreased with the addition of Ce and Yb, and no LPSO phases were detected in Mg88.5Zn5Y2.0Yb4.5. The alloys containing the LPSO phases possessed a stratified microstructure and exhibited excellent mechanical properties. Mg88.5Zn5Y5.0Ce1.5 exhibited the highest creep resistance and mechanical strength at both room temperature and 200 °C, owing to its suitable microstructure and high thermal stability. The yield strength of Mg88.5Zn5Y5.0Ce1.5 at room temperature was 358 MPa. The ultimate tensile strength of Mg88.5Zn5Y5.0Ce1.5 at room temperature and 200 °C was 453 MPa and 360 MPa, respectively.

scholarly journals Biocomposite of Cassava Starch Reinforced with Cellulose Pulp Fibers Modified with Deposition of Silica (SiO2) Nanoparticles

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Joabel Raabe ◽  
Alessandra de Souza Fonseca ◽  
Lina Bufalino ◽  
Caue Ribeiro ◽  
Maria Alice Martins ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Sol Gel ◽  
Fiber Surface ◽  
Sio2 Nanoparticles ◽  
Thermoplastic Starch ◽  
Cassava Starch ◽  
Sem Analysis ◽  
Pulp Fibers ◽  
Moisture Adsorption ◽  
Cellulose Pulp

Eucalyptuspulp cellulose fibers were modified by the sol-gel process for SiO2superficial deposition and used as reinforcement of thermoplastic starch (TPS). Cassava starch, glycerol, and water were added at the proportion of 60/26/14, respectively. For composites, 5% and 10% (by weight) of modified and unmodified pulp fibers were added before extrusion. The matrix and composites were submitted to thermal stability, tensile strength, moisture adsorption, and SEM analysis. Micrographs of the modified fibers revealed the presence of SiO2nanoparticles on fiber surface. The addition of modified fibers improved tensile strength in 183% in relation to matrix, while moisture adsorption decreased 8.3%. Such improvements were even more effective with unmodified fibers addition. This result was mainly attributed to poor interaction between modified fibers and TPS matrix detected by SEM analysis.

Effects of Accelerated Aging Period of Time at 180°C on Tensile Property of Plain Woven Fabric/Epoxy Resin Laminated Composites

2012 ◽  
Vol 182-183 ◽  
pp. 76-79 ◽  
Author(s):  
Lei Lei Song ◽  
Quan Rong Liu ◽  
Jia Lu Li
Keyword(s):  
Tensile Strength ◽  
Carbon Fiber ◽  
Epoxy Resin ◽  
Laminated Composites ◽  
Accelerated Aging ◽  
Woven Fabric ◽  
Accelerated Ageing ◽  
Time Intervals ◽  
Composite Samples

In this paper, carbon fiber reinforced resin matrix composites were produced by stacking eight pieces of carbon fiber woven plain fabric and subjected to accelerated ageing. Accelerated ageing was carried out in oven at 180°C for three different time intervals (60 hours, 120 hours and 180 hours). The influence of different ageing time intervals at 180°C on tensile properties of laminated composites was examined, compared with the composites without aging. The appearance and damage forms of these laminated composites were investigated. The results revealed that the tensile strength of the laminates declined significantly after long term accelerated aging at 180°C. The average tensile strengths of composite samples aged 60 hours, 120 hours, and 180 hours period of time at 180°C are 80.36%, 79.82%, 76.57% of average tensile strength of composite samples without aging, respectively. The high temperature accelerated aging makes the resin macromolecular structure in the composites changed, and then the adhesive force between fiber bundles and resin declines rapidly which result in the tensile strength of composites aged decrease. This research provides a useful reference for long term durability of laminated/epoxy resin composites.

scholarly journals Starch-Jute fiber hybrid biocomposite modified with Epoxy resin layer: Fabrication and Experimental Characterization

2018 ◽  
Author(s):  
Akarsh Verma ◽  
Kamal Joshi ◽  
Amit Gaur ◽  
V. K. Singh
Keyword(s):  
Tensile Strength ◽  
Water Absorption ◽  
Epoxy Resin ◽  
High Water ◽  
Epoxy Coating ◽  
Jute Fiber ◽  
Compression Moulding ◽  
Resin Layer ◽  
Major Disadvantage ◽  
Water Absorption Property

In this article, bio-composites derived from starch-glycerol biodegradable matrix reinforced with jute fibers have been fabricated using the wet hand lay-up and compression moulding techniques. Samples having different weight percentages of jute fiber in the starch matrix have been analysed. The fibers surface was chemically treated by alkaline sodium hydroxide for improving the interphase bonding between fiber and matrix. Tensile test for the composites were done and the sample with highest tensile strength was selected for further tests that included water absorption, scanning electron microscopy and thermal analysis. It has been concluded that the ultimate tensile strength was found to be maximum for the composition of 15% fiber by weight composite as 7.547 MPa without epoxy coating and 10.43 MPa with epoxy coating. The major disadvantage of bio-composite is its high water absorption property, which in this study has been inhibited by the epoxy resin layer. Herein, the results of various tests done disclose a noteworthy improvement in the overall properties of bio-composite, in comparison to the neat biodegradable starch matrix.

scholarly journals An Experimental Study on a Composite Bonding Structure for Steel Bridge Deck Pavements

2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Xiaoguang Zheng ◽  
Qi Ren ◽  
Huan Xiong ◽  
Xiaoming Song
Keyword(s):  
Tensile Strength ◽  
Shear Strength ◽  
Epoxy Resin ◽  
Bonding Strength ◽  
Bridge Deck ◽  
Steel Bridge ◽  
Shear Tests ◽  
Bonding Structure ◽  
Asphalt Overlay ◽  
Strength Tests

As one of the major contributors to the early failures of steel bridge deck pavements, the bonding between steel and asphalt overlay has long been a troublesome issue. In this paper, a novel composite bonding structure was introduced consisting of epoxy resin micaceous iron oxide (EMIO) primer, solvent-free epoxy resin waterproof layer, and ethylene-vinyl acetate (EVA) hot melt pellets. A series of strength tests were performed to study its mechanical properties, including pull-off strength tests, dumbbell tensile tests, lap shear tests, direct tension tests, and 45°-inclined shear tests. The results suggested that the bonding structure exhibited fair bonding strength, tensile strength, and shear strength. Anisotropic behaviour was also observed at high temperatures. For epoxy resin waterproof layer, the loss of bonding strength, tensile strength, and shear strength at 60°C was 70%, 35%, and 39%, respectively. Subsequent pavement performance-oriented tests included five-point bending tests and accelerated wheel tracking tests. The impacts of bonding on fatigue resistance and rutting propagation were studied. It was found that the proposed bonding structure could provide a durable and well-bonded interface and was thus beneficial to prolong the fatigue lives of asphalt overlay. The choice of bonding materials was found irrelevant to the ultimate rutting depth of pavements. But the bonding combination of epoxy resin waterproof and EVA pellets could delay the early-stage rutting propagation.

Sign in / Sign up

Export Citation Format

Share Document