scholarly journals Monitoring the long-term durability and microstructure of polymer concrete patching materials with high content of secondary raw materials using advanced methods

2018 ◽  
Vol 385 ◽  
pp. 012019
Author(s):  
J Hodul ◽  
L Meszarosova ◽  
R Drochytka
Keyword(s):  
Raw Materials ◽  
Polymer Concrete ◽  
Secondary Raw Materials

Silicate Sprayed Mixture Based on Secondary Raw Materials

2019 ◽  
Vol 808 ◽  
pp. 129-135
Author(s):  
Petr Figala ◽  
Rostislav Drochytka ◽  
Radek Hermann ◽  
Jiří Kolísko
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
High Temperature ◽  
Fly Ash ◽  
Raw Materials ◽  
Positive Influence ◽  
Foundry Sand ◽  
Secondary Raw Materials ◽  
Fundamental Research

This paper studies the fundamental research and development of sprayed cement-based mixture designed to withstand the chemically aggressive conditions. The aim of this paper is to verify the possibilities of usage of suitable secondary raw materials as a substitution of a binder and filler of the original mixture while preserving or improving the physical-mechanical properties. In this part of the research was studied the possibility to substitute the binder in rate of 20-60 wt.% by high temperature fly ash and the whole filler by foundry sand and slag. Test samples were made from nine recipes, in which was monitored the influence of secondary raw materials on the compressive strength and the water absorption after 28 days of curing. The results of this paper show, it is possible to successfully substitute part of the binder by high temperature fly ash and the filler wholly by foundry sand in the sprayed mixture. These optimized recipes showed positive influence mainly in the long-term on mechanical properties.

Antibacterial Properties, Shore Hardness and Chemical Resistance of Epoxy Coatings Containing Finely Ground Secondary Raw Materials for Hygienic Plants

2018 ◽  
Vol 876 ◽  
pp. 97-102 ◽  
Author(s):  
Jakub Hodul ◽  
Jana Hodná ◽  
Rostislav Drochytka
Keyword(s):  
Chemical Resistance ◽  
Negative Impact ◽  
Raw Materials ◽  
Antibacterial Properties ◽  
Silica Sand ◽  
Shore Hardness ◽  
Economic Point ◽  
Antibacterial Coating ◽  
Secondary Raw Materials

Currently fillers for antibacterial layers in hygienic operations are mainly primary raw materials, whose properties are verified and well-known due to their long-term use. However, the use of proper secondary raw materials appears to be a good option from an environmental and economic point of view. This work assesses the possible adverse effects of specially treated secondary raw materials in relation to antibacterial properties, chemical resistance and Shore hardness of the antibacterial coating on an epoxy base (AC-E) providing no physiological damage. This coating reliably eliminates the widest possible range of bacteria and yeasts, has sustained effectiveness, consistent functionality over time, provides permanent protection and is suitable for use in healthcare facilities and food processing plants. Two kinds of transparent waste glass (NaSX, VLG) and two types of waste foundry sand (FSC, FSB) were tested, and all fillers were treated so that particle size was below 0.063 mm, including the reference filler (Dorsilit sand). On the basis of antibacterial resistance tests, Shore hardness and chemical resistance, it was assessed that the tested fillers may be effectively used for antibacterial coatings while maintaining the properties of the reference coating. Within the rapid testing of chemical resistance, the surface microstructure of the antibacterial coating was also examined after long-term exposure to aggressive organic and inorganic liquid media. When adding 30% and 35% of the selected waste fillers, the hardness and chemical resistance of the cured coating did not change. The treated waste fillers tested had no negative impact on the antibacterial properties of the coating and were judged to be appropriate fillers in place of Dorsilit silica sand or glass flakes.

NEW VARIETIES OF FRUIT AND BERRIES IN SELECTION OF ALL-RUSSIAN RESEARCH INSTITUTE FOR NATURAL FOOD PRODUCTION

1970 ◽  
pp. 33-37
Author(s):  
N. S. Levgerova ◽  
Е. S. Salina ◽  
I. А. Sidorova
Keyword(s):  
Food Production ◽  
Raw Materials ◽  
Soluble Solids ◽  
Natural Food ◽  
Black Currant ◽  
Central Russia ◽  
Long Term Study ◽  
Apple Cultivars ◽  
Processed Products

The results of the technological assessment of new apple, cherry, black currant, red currant and gooseberry cultivars of VNIISPK breeding for the suitability for the natural food production are given. As a result, the cultivars that are promising for cultivation in raw plantings have been selected. For the production of raw materials in the juice industry, apple cultivars with a high juice yield and content of soluble solids higher than 10.0% were selected: ‘Bolotovskoye’ (Vf), ‘Candil Orlovsky’ (Vf), ‘Osipovskoye’ (3x), ‘Rozhdestvenskoye’ ((Vf + 3x), ‘Zaryanka’ (Vm), ‘Priokskoye’ ((Vf + Co), etc. Based on the long-term study of cultivars for their suitability for compote, jam and jelly, the cultivars that are most suitable for these types of processing are identified. It has been found that taking into account the daily needs of vitamins C and P as the most important antioxidants, all processed products from black currant can serve as their sources, all processed products from cherries, as well as apple juice and gooseberry marmalade can serve as a source of P-active compounds. All columnar apple cultivars as well as ‘Bolotovskoye’, ‘Rozhdestvenskoye’, ‘Veteran’, ‘Imrus’, etc. show high suitability for the production of apple chips. Cherry cultivars ‘Rovesnitsa’, ‘Putinka’, ‘Podarok Uchitelyam’ and ‘Novella’ are suitable for dried fruit. Based on the long-term studies of the technological qualities of the VNIISPK gene pool, a new generation assortment has been formed that has an optimal combination of chemical and technological indicators of fruits that meet modern technological requirements and are suitable for cultivation in the raw plantations of Central Russia.

The Economics of Commodities and Commodity Markets

2018 ◽  
Author(s):  
Florian Ielpo
Keyword(s):  
Raw Materials ◽  
Commodity Prices ◽  
Essential Element ◽  
Commodity Markets ◽  
Production Costs ◽  
Demand And Supply ◽  
Spot Prices ◽  
Supply Shocks ◽  
The Business Cycle

This chapter covers the economic fundamentals of commodity markets (i.e., what shapes the evolution of the price of raw materials) in three steps. First, it covers the theories explaining why the futures curve can be upward or downward sloping, an essential element for commodity producing companies. The evolution of inventories and hedging pressures are the two dominant sources of explanation. Second, the chapter reviews the fundamentals of commodity spot prices: technologies, supply, demand, and speculation. Production costs draw the long-term evolution of prices, but demand and supply shocks can trigger substantial variations in commodity prices. Third, the chapter presents how commodity prices interact with the business cycle. Commodities are influenced by the world activity but can also have a material impact on it.

Optimisation of long-term quarry production scheduling under geological uncertainty to supply raw materials to a cement plant

2021 ◽  
pp. 1-13
Author(s):  
Trong Vu ◽  
Tran Bao ◽  
Carsten Drebenstedt ◽  
Hien Pham ◽  
Hoai Nguyen ◽  
...  
Keyword(s):  
Production Scheduling ◽  
Raw Materials ◽  
Cement Plant ◽  
Geological Uncertainty

scholarly journals Organizational, technical and economic fundamentals of waste management and monitoring

2020 ◽  
Vol 164 ◽  
pp. 08031
Author(s):  
Evgeniy Velichko ◽  
Edward Tshovrebov ◽  
Ural Niyazgulov
Keyword(s):  
Legal Status ◽  
Raw Materials ◽  
Economic Regulation ◽  
Economic Activities ◽  
Renewable Raw Materials ◽  
Secondary Resources ◽  
Secondary Raw Materials ◽  
Production And Consumption ◽  
Level Of Use ◽  
Goals And Objectives

The article deals with issues of monitoring, planning, organizational and technical support, economic regulation and improving the efficiency of the infrastructure for processing, recycling and disposal of waste, resource conservation and management of secondary resources, their use as secondary raw materials for production, services, work and power generation. The Russian Federation has significant potential for economic growth due to the efficient use of secondary resources from billions of tons of generated production and consumption waste annually. These ecologically unsafe anthropogenic objects can be characterized as a source of valuable renewable raw materials, material and fuel and energy resources. However, the scale and level of use of various types of secondary resources are characterized by considerable unevenness and depend on the demand for secondary raw materials, the resource value of the waste, the environmental situation arising from treating them as environmental polluters, on the real economic conditions that determine the profitability of each specific type. economic activities that use secondary resources for the manufacture of products, works, services, energy production. The methods of monitoring the industry for the treatment, disposal and disposal of waste are: information-analytical, information-statistical, sociological, geo-information. The legal status of the monitoring system of the industry for the treatment, disposal and disposal of waste is determined by the limitations of its functionality within the framework of the goals and objectives facing it.

Preparation of Alternative Hydraulic Binder Based on Secondary Raw Materials

2014 ◽  
Vol 1000 ◽  
pp. 12-15
Author(s):  
Jiří Švec ◽  
Tomáš Opravil ◽  
Jiří Másilko
Keyword(s):  
Portland Cement ◽  
Raw Materials ◽  
Construction Materials ◽  
High Volume ◽  
Point Of View ◽  
Hydraulic Lime ◽  
Combustion Gases ◽  
Secondary Raw Materials ◽  
Hydraulic Binder ◽  
Massive Scale

Reusing and recycling of secondary raw materials from high-volume industrial productions (especially form construction materials and binders fabrications) is very important way of conserving environment and it is also interesting from the economical point of view. The production of common hydraulic binders, especially Portland cement, burdens the environment with considerable amount of combustion gases and consumes energy in massive scale. Alternative (low – energy) binder can be used as Portland cement substitution in applications with lower mechanical properties requirements. Mined limestone wash sediments contain large amount of clay components, but there is also indispensable share of fine calcite. This composition makes these sediments a promising material for the preparation of hydraulic binders as Roman cement or hydraulic lime.

STATE AND PROSPECTS OF PROCESSING OF SECONDARY RAW MATERIALS OF WINE-MAKING IN UKRAINE

2021 ◽  
Vol 15 (1) ◽  
Author(s):  
L. Osipova ◽  
O. Radionova ◽  
L. Tkachenko ◽  
T. Abramova
Keyword(s):  
Agricultural Land ◽  
Animal Feed ◽  
Raw Materials ◽  
Acid Soil ◽  
Biologically Active ◽  
Limiting Factor ◽  
Wine Making ◽  
Secondary Raw Materials ◽  
Use Of Resources ◽  
Wide Range

The analysis of the current state of processing of secondary raw materials of wine-making in Ukraine is given. It is proved that the latter is a rich source of biologically active compounds, including phenolic ones, which makes it possible to use it for the production of a wide range of products (raccoon, polyphenol extracts, tartaric acid, beverages, fertilizers, grape oil, cake, vitamin D, animal feed, food powder, abrasives) with high consumer value for various industries: food, pharmaceutical, perfume and cosmetics, chemical, feed, etc. In the light of modern research, the role of phenolic compounds as essential nutrition factors that cannot remain out of the field of view of physiologists, pharmacologists, and food hygiene specialists is shown. However, currently in Ukraine there are no specialized enterprises for complex processing of secondary raw materials of winemaking; traditional technologies are not effective from a technological, economic and environmental point of view, which indicates not rational use of resources and loss of material resources; there are no systematic studies on physical and chemical, microbiological, Toxicological composition in order to determine the optimal direction of its use. A limiting factor is also the lack of comparative analysis of innovative domestic and foreign technologies for processing secondary raw materials of winemaking. In the vast majority of cases, in particular, combs and pomace are taken out of control to agricultural land without special treatment, which leads to acid soil erosion and pollution of the environment with metabolites of micromycetes, increasing one of the global problems of mankind-environmental. At the present stage of technological development, there are a number of innovative developments in the field of processing secondary raw materials, in particular grape pomace, in order to obtain biologically active additives, the limiting factor for the introduction of which is the lack of domestic and expensive imported equipment. A promising way to solve the existing problems is to create a mechanism that will unite the interests of wineries (producers of secondary raw materials of winemaking), processing enterprises (producers of products from secondary raw materials of winemaking), scientists and potential consumers of innovative products. Consolidation of the above-mentioned institutions and enterprises is possible by creating clusters for the development and implementation of innovative technologies and equipment

Sign in / Sign up

Export Citation Format

Share Document