scholarly journals Study on microstructure of NiAl matrix high temperature lubricating composites containing BaO/TiO2 metallic oxide

2020 ◽  
Vol 7 (1) ◽  
pp. 016552
Author(s):  
Bo Li ◽  
Yimin Gao ◽  
Cong Li ◽  
Yunchuan Kang ◽  
Qiaoling Zheng ◽  
...  
Author(s):  
A. Garg ◽  
R. D. Noebe ◽  
R. Darolia

Small additions of Hf to NiAl produce a significant increase in the high-temperature strength of single crystals. Hf has a very limited solubility in NiAl and in the presence of Si, results in a high density of G-phase (Ni16Hf6Si7) cuboidal precipitates and some G-platelets in a NiAl matrix. These precipitates have a F.C.C structure and nucleate on {100}NiAl planes with almost perfect coherency and a cube-on-cube orientation-relationship (O.R.). However, G-phase is metastable and after prolonged aging at high temperature dissolves at the expense of a more stable Heusler (β'-Ni2AlHf) phase. In addition to these two phases, a third phase was shown to be present in a NiAl-0.3at. % Hf alloy, but was not previously identified (Fig. 4 of ref. 2 ). In this work, we report the morphology, crystal-structure, O.R., and stability of this unknown phase, which were determined using conventional and analytical transmission electron microscopy (TEM).Single crystals of NiAl containing 0.5at. % Hf were grown by a Bridgman technique. Chemical analysis indicated that these crystals also contained Si, which was not an intentional alloying addition but was picked up from the shell mold during directional solidification.


2020 ◽  
Vol 16 (2) ◽  
pp. 41-49
Author(s):  
Hong Zhi Cui ◽  
Angelica A. Grigoryevskaya ◽  
Igor P. Gulyaev

In the work, microstructures formed in the combustion wave of the Ni-Al system with hardening additives of high-temperature ceramic particles consisting of titanium diboride and corundum were studied. Microstructures and shapes vary depending on the content of ceramic additives in the NiAl matrix. Particles of TiB2 take the most diverse elementary forms, such as bars, plates, herringbones, regular cubic structures and cuboids. These results outline a real-time strategy of self-assembly processes to create diversified microstructures. Some grains of titanium diboride 2-5 m in size are embedded in corundum clusters, and a small number of TiB2 particles are dispersed in the NiAl matrix. It is assumed that the higher the content of reinforcing additives, the more uniform the distribution of the ceramic skeleton will be present in the NiAl matrix.


1992 ◽  
Vol 7 (10) ◽  
pp. 2724-2732 ◽  
Author(s):  
J. Daniel Whittenberger ◽  
Michael J. Luton

Previous studies of a single lot of NiAl powder which had been ground under high intensity conditions in liquid nitrogen (cryomilling) indicated that this processing leads to a high strength, elevated temperature NiAl–AlN composite. Because this was the first known example of the use of the reaction milling process to produce a high temperature composite, the reproducibility of this technique was unknown. Two additional lots of NiAl powder and a lot of a Zr-doped NiAl powder have been cryomilled, and analyses indicate that AlN was formed within a NiAl matrix in all three cases. Compression testing between 1200 K and 1400 K has shown that the deformation resistance of these heats is similar to that of the first lot of NiAl–AlN; thus cryomilling can improve the creep resistance of NiAl by a factor of six. Based on this work, it is concluded that cryomilling of NiAl powder to form high temperature, high strength NiAl–AlN composites is a reproducible process.


2012 ◽  
Vol 443-444 ◽  
pp. 1084-1090
Author(s):  
Zhan Ying Guo ◽  
Rong Ran ◽  
Xin Qian Shu ◽  
Ying Ying Yuan ◽  
Yue Zhang ◽  
...  

In order to study the catalytic activity in the preparation of fuel gases from catalytic pyrolysis of coal, the author selects NixOy/γ-Al2O3、CrxOy/γ-Al2O3,AgxOy/γ-Al2O3 and CoxOy/γ-Al2O3, respectively as the metal oxide supported catalysts from the previous experiment’s results. These catalysts have been added to Shenhua coal for a series of experiments. After these experiments, GC (gas chromatography) has been used for the analysis on the yield changes of CO and CH4 which result from the experiments. The results show that all of these catalysts have a positive influence on the yield of CO and CH4. As to the yield of CO, catalytic activity of CrxOy/γ-Al2O3 represents the most prominent performance at medium temperature period and CoxOy/γ-Al2O3 represents the same performance at high temperature period, while NixOy/γ-Al2O3, in which a great number of aluminum acid nickel spinels are reduced into metallic Ni at high temperature period, which results in different catalytic activity center from raw metallic Ni reduced from NiO. Consequently, the former reduced Ni shows outstanding catalytic activity. As to the yield of CH4, four catalysts mentioned above represent either the similar catalytic activity with CO or the individual characteristic —on one hand ,due to the strong adsorption of AgO and CrO3, CH4 gas is changed into H2 via pyrolysis at medium temperature as the yield of CH4 slumps ,on the other hand, due to an enormous amount of H2 production ,there is a drastically chemical reaction between H2 and these catalysts at high temperature, in which the yield of CH4 upswings toward the maximum amount greatly at the same time. Therefore, CrxOy/γ-Al2O3, AgxOy/γ-Al2O3 and CoxOy/γ-Al2O3 are more efficient at medium temperature and high temperature respectively. However, NixOy/γ-Al2O3 demonstrates the positive influence only from 800°Con. All of these results depend on the essence of catalysts to some extent. The study would have some theoretical guidance about increasing the utilization of coal and about industrial application of fuel gases generated from catalytic pyrolysis of coal.


1955 ◽  
Vol 8 (4) ◽  
pp. 506 ◽  
Author(s):  
HH Hatt ◽  
JA Lamberton

If ketones are prepared by heating unsaturated fatty acids at a high temperature in the presence of a metal or metallic oxide catalyst, some stereoisomeric change and movement of the double bond accompany ketonization. The ketones, oleone and erucone of the cis-cis-class, described in the literature as products of reactions of this kind, are shown to have been mixtures of isomers with trans-trans-forms predominating. Oleone and erucone, containing no detectable amounts of trans-material can be prepared either from the corresponding acyl chloride and triethylamine, or by condensation of the methyl or ethyl ester of the appropriate acid in xylene using sodium ethoxide as catalyst. These ketones are readily converted to the tetrahydroxy ketones and thence by oxidation to ketodibasic acids, useful as intermediates for the preparation of cyclic ketones.


1994 ◽  
Vol 350 ◽  
Author(s):  
L. Wang ◽  
K. Xu ◽  
R. J. Arsenault

AbstractAn increase in the athermal component of the yield stress at low temperatures is the caused of the high temperature strengthening of discontinuously reinforced NiAl matrix composites. The reinforcements stabilize the microstructure. The strengthening in the temperature range of 300–1273K, is believed to be related to the grain size refinement and effective pinning of grain boundaries. This conclusion was obtained from analysis of data from AlN, TiB2 and Al2O3/NiAl particulate composites.


Sign in / Sign up

Export Citation Format

Share Document