scholarly journals Immersive visualisation of intracardiac blood flow in virtual reality on a patient with HLHS

2021 ◽  
Vol 22 (Supplement_1) ◽  
Author(s):  
S Bhattacharya ◽  
E Lin ◽  
G Sajith ◽  
L Munroe ◽  
K Pushparajah ◽  
...  
Keyword(s):  
Blood Flow ◽  
Virtual Reality ◽  
Volume Rendering ◽  
Cfd Simulation ◽  
Fluid Dynamic ◽  
Source Region ◽  
Ease Of Use ◽  
Frame Rate ◽  
Flow Visualisation ◽  
Spherical Source

Abstract Funding Acknowledgements Type of funding sources: Other. Main funding source(s): NIHR i4i funded 3D Heart project Wellcome/EPSRC Centre for Medical Engineering [WT 203148/Z/16/Z] onbehalf 3D Heart Project Background/Introduction: Virtual Reality (VR) for surgical and interventional planning in the treatment of Congenital Heart Disease (CHD) is an emerging field that has the potential to improve planning. Particularly in very complex cases, VR permits enhanced visualisation and more intuitive interaction of volumetric images, compared to traditional flat-screen visualisation tools. Blood flow is severely affected by CHD and, thus, visualisation of blood flow allows direct observation of the cardiac maladaptions for surgical planning. However, blood flow is fundamentally 3D information, and viewing and interacting with it using conventional 2D displays is suboptimal.  Purpose To demonstrate feasibility of blood flow visualisation in VR using pressure and velocity obtained from a computational fluid dynamic (CFD) simulation of the right ventricle in a patient with hypoplastic left heart syndrome (HLHS) as a proof of concept. Methods  We extend an existing VR volume rendering application to include CFD rendering functionality using the Visualization Toolkit (VTK), an established visualisation library widely used in clinical software for visualising medical imaging data. Our prototype displays the mesh outline of the segmented heart, a slicing plane showing blood pressure on the plane within the heart, and streamlines of blood flow from a spherical source region. Existing user tools were extended to enable interactive positioning, rotation and scaling of the pressure plane and streamline origin, ensuring continuity between volume rendering and CFD interaction and, thus, ease of use. We evaluated if rendering and interaction times were low enough to ensure a comfortable, interactive VR experience. Our performance benchmark is a previous study showing VR is acceptable to clinical users when rendering speed is at least 90 fps. Results CFD simulations were successfully rendered, viewed and manipulated in VR, as shown in the Figure. Evaluating performance, we found that visualisation of the mesh and streamlines was at an acceptably high and stable frame rate, over 150fps. User interactions of moving, rotating or scaling the mesh or streamlines origin did not significantly reduce this frame rate. However, rendering the  pressure slicing plane reduced frame rate by an unacceptable degree, to less than 10fps.   Conclusion Visualisation of and interaction with CFD simulation data was successfully integrated into an existing VR application. This aids in surgery and intervention planning for defects heavily relying on blood flow simulation, and lays a foundation for a platform for clinicians to test interventions in VR. Pressure plane rendering performance will require significant optimisation, potentially addressed by updating the pressure plane data separately from the main, VR rendering. Abstract Figure. An example render of CFD simulation

scholarly journals Computational Fluid Dynamic (CFD) Simulation of Bifurcate Artery

2021 ◽  
Author(s):  
Yas Barzegar ◽  
Atrin Barzegar
Keyword(s):  
Blood Flow ◽  
Flow Pattern ◽  
Cfd Simulation ◽  
Fluid Dynamic ◽  
Blood Flow Rate ◽  
Heart Attacks ◽  
Fat Particles ◽  
Fluent Software ◽  
Flow Through ◽  
Computation Fluid Dynamic

Heart attacks and strokes are one of the leading causes of death in the world today, and heart attacks caused by clogged arteries that carry blood to the heart muscle are a significant part of these strokes. These are caused by the accumulation of fat particles in the walls of the arteries and the reduction of blood flow through it over a long process. The process of fat penetration in the underlying layers of the Artery wall has been the focus of many researchers, and various researches and Simulations have been done on it, in each of them, the effect of specific parameters has been considered. In the present study, the effect of blood flow rate on the flow pattern in a bifurcate artery with two ducts has been investigated using FLUENT software with Computation fluid dynamic Method. The effect of the angle between the two ducts of the Artery on the flow pattern has been investigated.

scholarly journals Effective volume rendering on mobile and standalone VR headsets by means of a hybrid method

2020 ◽  
Vol 15 (2) ◽  
pp. 3-12
Author(s):  
Balázs Tukora
Keyword(s):  
Virtual Reality ◽  
Volume Rendering ◽  
Texture Mapping ◽  
Volume Visualization ◽  
Frame Rate ◽  
Hybrid Technique ◽  
Ray Casting ◽  
Volumetric Data ◽  
3D Texture ◽  
Rendering Techniques

Abstract:Numerous volume rendering techniques are available to display 3D datasets on desktop computers and virtual reality devices. Recently the spreading of mobile and standalone virtual reality headsets has brought the need for volume visualization on these platforms too. However, the volume rendering techniques that show good performance in desktop environment underachieve on these devices, due to the special hardware conditions and visualization requirements. To speed up the volumetric rendering to an accessible level a hybrid technique is introduced, a mix of the ray casting and 3D texture mapping methods. This technique increases 2-4 times the frame rate of displaying volumetric data on mobile and standalone virtual reality headsets as compared to the original methods. The new technique was created primarily to display medical images but it is not limited only to this type of volumetric data.

scholarly journals Impeller Optimization in Crossflow Hydraulic Turbines

Water ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 313
Author(s):  
Marco Sinagra ◽  
Calogero Picone ◽  
Costanza Aricò ◽  
Antonio Pantano ◽  
Tullio Tucciarelli ◽  
...  
Keyword(s):  
Cfd Simulation ◽  
Fluid Dynamic ◽  
Structural Safety ◽  
3D Fem ◽  
Good Efficiency ◽  
Standard Material ◽  
Variable Head ◽  
Hydraulic Turbines ◽  
Constructive Simplicity ◽  
Mechanical Optimization

Crossflow turbines represent a valuable choice for energy recovery in aqueducts, due to their constructive simplicity and good efficiency under variable head jump conditions. Several experimental and numerical studies concerning the optimal design of crossflow hydraulic turbines have already been proposed, but all of them assume that structural safety is fully compatible with the sought after geometry. We show first, with reference to a specific study case, that the geometry of the most efficient impeller would lead shortly, using blades with a traditional circular profile made with standard material, to their mechanical failure. A methodology for fully coupled fluid dynamic and mechanical optimization of the blade cross-section is then proposed. The methodology assumes a linear variation of the curvature of the blade external surface, along with an iterative use of two-dimensional (2D) computational fluid dynamic (CFD) and 3D structural finite element method (FEM) simulations. The proposed methodology was applied to the design of a power recovery system (PRS) turbine already installed in an operating water transport network and was finally validated with a fully 3D CFD simulation coupled with a 3D FEM structural analysis of the entire impeller.

scholarly journals Computational fluid dynamics (CFD) simulation analysis on retinal gas cover rates using computational eye models

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Makoto Gozawa ◽  
Yoshihiro Takamura ◽  
Tomoe Aoki ◽  
Kentaro Iwasaki ◽  
Masaru Inatani
Keyword(s):  
Cfd Simulation ◽  
Simulation Analysis ◽  
Fluid Dynamic ◽  
Fluid Analysis ◽  
Intraocular Gas ◽  
Pars Plana ◽  
Computational Fluid Dynamics Cfd ◽  
Multiple Breaks ◽  
Gas Volume ◽  
Wall Wettability

AbstractWe investigated the change in the retinal gas cover rates due to intraocular gas volume and positions using computational eye models and demonstrated the appropriate position after pars plana vitrectomy (PPV) with gas tamponade for rhegmatogenous retinal detachments (RRDs). Computational fluid dynamic (CFD) software was used to calculate the retinal wall wettability of a computational pseudophakic eye models using fluid analysis. The model utilized different gas volumes from 10 to 90%, in increments of 10% to the vitreous cavity in the supine, sitting, lateral, prone with closed eyes, and prone positions. Then, the gas cover rates of the retina were measured in each quadrant. When breaks are limited to the inferior retina anterior to the equator or multiple breaks are observed in two or more quadrants anterior to the equator, supine position maintained 100% gas cover rates in all breaks for the longest duration compared with other positions. When breaks are limited to either superior, nasal, or temporal retina, sitting, lower temporal, and lower nasal position were maintained at 100% gas cover rates for the longest duration, respectively. Our results may contribute to better surgical outcomes of RRDs and a reduction in the duration of the postoperative prone position.

scholarly journals Simulation of Hydraulic Cylinder Cushioning

2021 ◽  
Vol 13 (2) ◽  
pp. 494
Author(s):  
Antonio Algar ◽  
Javier Freire ◽  
Robert Castilla ◽  
Esteban Codina
Keyword(s):  
Dynamic Model ◽  
Cfd Simulation ◽  
Fluid Dynamic ◽  
Computational Fluid Dynamic Simulation ◽  
Hydraulic Cylinder ◽  
Outlet Port ◽  
Optimal Behavior ◽  
Radial Movement ◽  
Mechanical Shocks ◽  
Radial Gap

The internal cushioning systems of hydraulic linear actuators avoid mechanical shocks at the end of their stroke. The design where the piston with perimeter grooves regulates the flow by standing in front of the outlet port has been investigated. First, a bond graph dynamic model has been developed, including the flow throughout the internal cushion design, characterized in detail by computational fluid-dynamic simulation. Following this, the radial movement of the piston and the fluid-dynamic coefficients, experimentally validated, are integrated into the dynamic model. The registered radial movement is in coherence with the significant drag force estimated in the CFD simulation, generated by the flow through the grooves, where the laminar flow regime predominates. Ultimately, the model aims to predict the behavior of the cushioning during the movement of the arm of an excavator. The analytical model developed predicts the performance of the cushioning system, in coherence with empirical results. There is an optimal behavior, highly influenced by the mechanical stress conditions of the system, subject to a compromise between an increasing section of the grooves and an optimization of the radial gap.

The Effect of Incorporating Vessel Compliance in a Computational Model of Blood Flow in a Total Cavopulmonary Connection (TCPC) with Caval Centerline Offset

2004 ◽  
Vol 126 (6) ◽  
pp. 709-713 ◽  
Author(s):  
J. C. Masters ◽  
M. Ketner ◽  
M. S. Bleiweis ◽  
M. Mill ◽  
A. Yoganathan ◽  
...  
Keyword(s):  
Blood Flow ◽  
Power Loss ◽  
Fluid Dynamic ◽  
Reducing Power ◽  
Pressure Head ◽  
Congenital Defects ◽  
Total Cavopulmonary Connection ◽  
Flow Mixing ◽  
The Right ◽  
Cavopulmonary Connection

Background—The total cavopulmonary connection (TCPC), a palliative correction for congenital defects of the right heart, is based on the corrective technique developed by Fontan and Baudet. Research into the TCPC has primarily focused on reducing power loss through the connection as a means to improve patient longevity and quality of life. The goal of our study is to investigate the efficacy of including a caval offset on the hemodynamics and, ultimately, power loss of a connection. As well, we will quantify the effect of vessel wall compliance on these factors and, in addition, the distribution of hepatic blood to the lungs. Methods—We employed a computational fluid dynamic model of blood flow in the TCPC that includes both the non-Newtonian shear thinning characteristics of blood and the nonlinear compliance of vessel tissue. Results—Power loss in the rigid-walled simulations decayed exponentially as caval offset increased. The compliant-walled results, however, showed that after an initial substantial decrease in power loss for offsets up to half the caval diameter, power loss increased slightly again. We also found only minimal mixing in both simulations of all offset models. Conclusions—The increase in power loss beyond an offset of half the caval diameter was due to an increase in the kinetic contribution. Reduced caval flow mixing, on the other hand, was due to the formation of a pressure head in the offset region which acts as a barrier to flow.

CFD Simulation of a Co-rotating Twin-screw Extruder: Validation of a Rheological Model for a Starch-Based Dough for Snack Food

2017 ◽  
Vol 14 (2) ◽  
Author(s):  
Giorgia Tagliavini ◽  
Federico Solari ◽  
Roberto Montanari
Keyword(s):  
Cfd Simulation ◽  
Fluid Dynamic ◽  
Operating Conditions ◽  
Second Phase ◽  
Snack Food ◽  
Suitable Model ◽  
Twin Screw Extruder ◽  
Parallel Plates ◽  
Screw Extruder ◽  
Twin Screw

AbstractThe extrusion of starch-based products has been a matter of interest, especially for the pasta and the snack food production. In recent years, twin-screw extruders for snack food have been studied from both structural and fluid dynamics viewpoints. This project started from the rheological characterization of a starch-based dough (corn 34 wt%, tapioca 32 wt%), comparing viscosity values acquired in laboratory with different theoretical models found in literature. A computational fluid dynamic (CFD) simulation recreating the simple case of a fluid flow between two parallel plates was carried out to validate the former comparison. After the rheological validation was completed, the second phase of this work covered a 3D CFD simulation of the first part of the twin-screw extruder (feeding zone). The objective was to find a suitable model for describing the dough rheological behavior and the operating conditions of a co-rotating intermeshing twin-screw extruder. Once the model would be defined, it would allow to investigate several working conditions and different screws geometries of the machine, predicting the evolution of the product rheological properties.

scholarly journals Computational Fluid Dynamic Accuracy in Mimicking Changes in Blood Hemodynamics in Patients with Acute Type IIIb Aortic Dissection Treated with TEVAR

2018 ◽  
Vol 8 (8) ◽  
pp. 1309 ◽  
Author(s):  
Andrzej Polanczyk ◽  
Aleksandra Piechota-Polanczyk ◽  
Christoph Domenig ◽  
Josif Nanobachvili ◽  
Ihor Huk ◽  
...  
Keyword(s):  
Blood Flow ◽  
Aortic Dissection ◽  
Flow Rate ◽  
Fluid Dynamic ◽  
3D Models ◽  
Renal Arteries ◽  
Acute Type ◽  
Type Iiib ◽  
Doppler Data ◽  
Flow Through

Background: We aimed to verify the accuracy of the Computational Fluid Dynamics (CFD) algorithm for blood flow reconstruction for type IIIb aortic dissection (TBAD) before and after thoracic endovascular aortic repair (TEVAR). Methods: We made 3D models of the aorta and its branches using pre- and post-operative CT data from five patients treated for TBAD. The CFD technique was used to quantify the displacement forces acting on the aortic wall in the areas of endograft, mass flow rate/velocity and wall shear stress (WSS). Calculated results were verified with ultrasonography (USG-Doppler) data. Results: CFD results indicated that the TEVAR procedure caused a 7-fold improvement in overall blood flow through the aorta (p = 0.0001), which is in line with USG-Doppler data. A comparison of CFD results and USG-Doppler data indicated no significant change in blood flow through the analysed arteries. CFD also showed a significant increase in flow rate for thoracic trunk and renal arteries, which was in accordance with USG-Doppler data (accuracy 90% and 99.9%). Moreover, we observed a significant decrease in WSS values within the whole aorta after TEVAR compared to pre-TEVAR (1.34 ± 0.20 Pa vs. 3.80 ± 0.59 Pa, respectively, p = 0.0001). This decrease was shown by a significant reduction in WSS and WSS contours in the thoracic aorta (from 3.10 ± 0.27 Pa to 1.34 ± 0.11Pa, p = 0.043) and renal arteries (from 4.40 ± 0.25 Pa to 1.50 ± 0.22 Pa p = 0.043). Conclusions: Post-operative remodelling of the aorta after TEVAR for TBAD improved hemodynamic patterns reflected by flow, velocity and WSS with an accuracy of 99%.

The Impact of Predried Lignite Cofiring With Hard Coal in an Industrial Scale Pulverized Coal Fired Boiler

2018 ◽  
Vol 140 (6) ◽  
Author(s):  
Halina Pawlak-Kruczek ◽  
Robert Lewtak ◽  
Zbigniew Plutecki ◽  
Marcin Baranowski ◽  
Michal Ostrycharczyk ◽  
...  
Keyword(s):  
Combustion Chamber ◽  
Bituminous Coal ◽  
Cfd Simulation ◽  
Numerical Study ◽  
Fluid Dynamic ◽  
Industrial Scale ◽  
Hard Coal ◽  
Cfd Simulations ◽  
Reference Case ◽  
The Impact

The paper presents the experimental and numerical study on the behavior and performance of an industrial scale boiler during combustion of pulverized bituminous coal with various shares of predried lignite. The experimental measurements were carried out on a boiler WP120 located in CHP, Opole, Poland. Tests on the boiler were performed during low load operation and the lignite share reached over to 36% by mass. The predried lignite, kept in dedicated separate bunkers, was mixed with bituminous coal just before the coal mills. Computational fluid dynamic (CFD) simulation of a cofiring scenario of lignite with hard coal was also performed. Site measurements have proven that cofiring of a predried lignite is not detrimental to the boiler in terms of its overall efficiency, when compared with a corresponding reference case, with 100% of hard coal. Experiments demonstrated an improvement in the grindability that can be achieved during co-milling of lignite and hard coal in the same mill, for both wet and dry lignite. Moreover, performed tests delivered empirical evidence of the potential of lignite to decrease NOx emissions during cofiring, for both wet and dry lignite. Results of efficiency calculations and temperature measurements in the combustion chamber confirmed the need to predry lignite before cofiring. Performed measurements of temperature distribution in the combustion chamber confirmed trend that could be seen in the results of CFD. CFD simulations were performed for predried lignite and demonstrated flow patterns in the combustion chamber of the boiler, which could prove useful in case of any further improvements in the firing system. CFD simulations reached satisfactory agreement with the site measurements in terms of the prediction of emissions.

Sign in / Sign up

Export Citation Format

Share Document