PSXIV-24 Real-time, on-site whole genome sequencing with oxford nanopore technologies’ MinION

2021 ◽  
Vol 99 (Supplement_3) ◽  
pp. 257-258
Author(s):  
Hanna Ostrovski ◽  
Rodrigo Pelicioni Savegnago ◽  
Wen Huang ◽  
Cedric Gondro
Keyword(s):  
Real Time ◽  
Ease Of Use ◽  
Whole Genome Sequence ◽  
Genomic Sequencing ◽  
Whole Genome ◽  
Illumina Hiseq ◽  
Base Calling ◽  
Oxford Nanopore ◽  
Oxford Nanopore Technologies

Abstract Most quantitative geneticists are traditionally trained for data analysis in genetic evaluation and genomic prediction, but rarely have extensive knowledge of molecular genetics or experience in experimental labs. Recent products, such as those launched by Oxford Nanopore Technologies (ONT), give those quantitative geneticists a comprehensible and hands-on toolkit to explore DNA sequencing. The ‘MinION’, a small DNA sequencer, is of interest for quantitative geneticists due to both the minimal learning curve and the non-proprietary USB connectivity. This device is small enough to be portable, allowing for potential real-time, on-farm sequencing. The objective of this project is to compare the whole genome sequence (WGS) output of the MinION sequencer to that of the Illumina HiSeq 4000. Blood was collected from a 6-month-old Akaushi calf born on a Michigan State University farm. DNA was extracted from the sample using the QIAamp DNA Blood Kit from Qiagen, and library DNA ligation preparation (SQK-LSK109) from ONT was used. After base-calling with guppy software (provided by ONT), the data were preprocessed and experimental runs with the MinION were compared using quality control. Finally, the data were aligned with guppy software, and was compared to the aligned WGS obtained with Illumina HiSeq. Quality results from each MinION indicate that, despite the low amount of sequence collected in each run (~225,303 reads per run), the quality of bases sequenced was high (Q≥7). The aligned data from the Illumina sequencer provided 40x coverage of the genome, with a total of 739,339,742 reads. Although the amount of data obtained with MinION is much smaller than that of Illumina HiSeq, the high quality of MinION’s data combined with its ease of use give an opportunity of genomic sequencing for users who are either inexperienced or do not have access to large genomic sequencing devices.

scholarly journals Identification and Whole-Genome Sequencing of a Monkeypox Virus Strain Isolated in Israel

2020 ◽  
Vol 9 (10) ◽  
Author(s):  
Inbar Cohen-Gihon ◽  
Ofir Israeli ◽  
Ohad Shifman ◽  
Noam Erez ◽  
Sharon Melamed ◽  
...  
Keyword(s):  
West Africa ◽  
Whole Genome Sequencing ◽  
Genome Sequencing ◽  
Virus Strain ◽  
Illumina Miseq ◽  
Whole Genome Sequence ◽  
Whole Genome ◽  
Monkeypox Virus ◽  
Oxford Nanopore ◽  
Oxford Nanopore Technologies

We report the whole-genome sequence of a monkeypox virus strain isolated in Israel. The strain was isolated in 2018 from a patient travelling back from West Africa. The virus was fully sequenced on the Illumina MiSeq and Oxford Nanopore Technologies MinION platforms.

scholarly journals BoardION: real-time monitoring of Oxford Nanopore Technologies devices

2020 ◽  
Author(s):  
Aimeric Bruno ◽  
Jean-Marc Aury ◽  
Stefan Engelen
Keyword(s):  
Real Time ◽  
Web Application ◽  
Data Streaming ◽  
Sequencing Data ◽  
Real Time Monitoring ◽  
Time Data ◽  
Oxford Nanopore ◽  
Sequencing Platforms ◽  
Oxford Nanopore Technologies

AbstractSummaryOne of the main advantages of the Oxford Nanopore Technology (ONT) is the possibility of sequencing in real time. However, the ONT sequencing interface is not sufficient to explore the quality of sequencing data in depth and existing tools do not take full advantage of real-time data streaming. We present BoardION, an interactive web application, dedicated to sequencing platforms, for real-time monitoring of all ONT sequencing devices (MinION, Mk1C, GridION and PromethION). BoardION allows users to easily explore sequencing metrics and optimize the quantity and the quality of the generated data during the experiment. It also enables the comparison of several flowcells to evaluate the library preparation protocols or the quality of input samples.AvailabilitySource code and a Docker image are available at http://www.genoscope.cns.fr/boardion/[email protected]

scholarly journals Haemophilus influenzae Meningitis Direct Diagnosis by Metagenomic Next-Generation Sequencing: A Case Report

Pathogens ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 461
Author(s):  
Madjid Morsli ◽  
Quentin Kerharo ◽  
Jeremy Delerce ◽  
Pierre-Hugues Roche ◽  
Lucas Troude ◽  
...  
Keyword(s):  
Next Generation Sequencing ◽  
Haemophilus Influenzae ◽  
Real Time ◽  
Real Time Pcr ◽  
Point Of Care ◽  
Next Generation ◽  
Oxford Nanopore ◽  
Sequence Encoding ◽  
Oxford Nanopore Technologies ◽  
Generation Sequencing

Current routine real-time PCR methods used for the point-of-care diagnosis of infectious meningitis do not allow for one-shot genotyping of the pathogen, as in the case of deadly Haemophilus influenzae meningitis. Real-time PCR diagnosed H. influenzae meningitis in a 22-year-old male patient, during his hospitalisation following a more than six-metre fall. Using an Oxford Nanopore Technologies real-time sequencing run in parallel to real-time PCR, we detected the H. influenzae genome directly from the cerebrospinal fluid sample in six hours. Furthermore, BLAST analysis of the sequence encoding for a partial DUF417 domain-containing protein diagnosed a non-b serotype, non-typeable H.influenzae belonging to lineage H. influenzae 22.1-21. The Oxford Nanopore metagenomic next-generation sequencing approach could be considered for the point-of-care diagnosis of infectious meningitis, by direct identification of pathogenic genomes and their genotypes/serotypes.

scholarly journals Real-Time Sequencing of Mycobacterium tuberculosis: Are We There Yet?

2017 ◽  
Vol 55 (5) ◽  
pp. 1249-1254 ◽  
Author(s):  
Robyn S. Lee ◽  
Madhukar Pai
Keyword(s):  
Mycobacterium Tuberculosis ◽  
Real Time ◽  
Phylogenetic Trees ◽  
Illumina Miseq ◽  
Turnaround Time ◽  
Epidemiologic Studies ◽  
Content Type ◽  
Leading Role ◽  
Oxford Nanopore ◽  
Oxford Nanopore Technologies

ABSTRACT Whole-genome sequencing has taken a leading role in epidemiologic studies of tuberculosis, but thus far, its real-time clinical utility has been low, in part because of the requirement for culture. In their report in this issue, Votintseva et al. (A. A. Votintseva, P. Bradley, L. Pankhurst, C. del Ojo Elias, M. Loose, K. Nilgiriwala, A. Chatterjee, E. G. Smith, N. Sanderson, T. M. Walker, M. R. Morgan, D. H. Wyllie, A. S. Walker, T. E. A. Peto, D. W. Crook, and Z. Iqbal, J Clin Microbiol 55:1285–1298, 2017, https://doi.org/10.1128/JCM.02483-16 ) present a new method for extracting Mycobacterium tuberculosis DNA directly from smear-positive respiratory samples, making it feasible to generate drug resistance predictions and phylogenetic trees in 44 h with the Illumina MiSeq. They also illustrate the potential for a <24-h turnaround time from DNA extraction to clinically relevant results with Illumina MiniSeq and Oxford Nanopore Technologies MinION. We comment on the promise and limitations of these approaches.

scholarly journals Determination and Structural Analysis of the Whole-Genome Sequence of Fusarium equiseti D25-1

2020 ◽  
Author(s):  
Xueping LI ◽  
Jianhong Li ◽  
Yonghong Qi ◽  
Yonggang Liu ◽  
Minquan Li
Keyword(s):  
Molecular Mechanisms ◽  
Gc Content ◽  
Whole Genome Sequence ◽  
Effective Control ◽  
Sequence Length ◽  
Comparative Genomic ◽  
Whole Genome ◽  
Illumina Hiseq ◽  
Fusarium Equiseti ◽  
Wide Range

Abstract BackgroundFusarium equiseti is a plant pathogen with a wide range of hosts and diverse effects, including probiotic activity. However, the underlying molecular mechanisms remain unclear, hindering its effective control and utilization. In this study, the Illumina HiSeq 4000 and PacBio platforms were used to sequence and assemble the whole genome of Fusarium equiseti D25-1.ResultsThe assembly included 16 fragments with a GC content of 48.01%, gap number of zero, and size of 40,776,005 bp. There were 40,110 exons and 26,281 introns having a total size of 19,787,286 bp and 2,290,434 bp, respectively. The genome had an average copy number of 333, 71, 69, 31, and 108 for tRNAs, rRNAs, sRNAs, snRNAs, and miRNAs, respectively. The total repetitive sequence length was 1,713,918 bp, accounting for 4.2033% of the genome. In total, 13,134 functional genes were annotated, accounting for 94.97% of the total gene number. Toxin-related genes, including two related to zearalenone and 23 related to trichothecene, were identified. A comparative genomic analysis supported the high quality of the F. equiseti assembly, exhibiting good collinearity with the reference strains, 3,483 species-specific genes, and 1,805 core genes. A gene family analysis revealed more than 2,500 single-copy orthologs. F. equiseti was most closely related to Fusarium pseudograminearum based on a phylogenetic analysis at the whole-genome level.ConclusionsOur comprehensive analysis of the whole genome of F. equiseti provides basic data for studies of gene expression, regulatory and functional mechanisms, evolutionary processes, as well as disease prevention and control.

scholarly journals Fast-Bonito: A Faster Basecaller for Nanopore Sequencing

2020 ◽  
Author(s):  
Zhimeng Xu ◽  
Yuting Mai ◽  
Denghui Liu ◽  
Wenjun He ◽  
Xinyuan Lin ◽  
...  
Keyword(s):  
Network Architecture ◽  
Original Version ◽  
Neuron Network ◽  
Base Calling ◽  
Oxford Nanopore ◽  
Speed Up ◽  
Downstream Analysis ◽  
Next Generation Sequencing Ngs ◽  
Oxford Nanopore Technologies ◽  
Generation Sequencing

AbstractOxford Nanopore Technologies (ONT) is a promising sequencing technology that could generate relatively longer sequencing reads compared to the next generation sequencing (NGS) technology. The base calling process is very important for TGS. It translates the original electrical signals from the sequencer to the nucleotide sequence. By doing that, the base calling could significantly influence the accuracy of downstream analysis. Bonito is a recently developed basecaller based on deep neuron network, the neuron network architecture of which is composed of a single convolutional layer followed by three stacked bidirectional GRU layers. Although Bonito achieved the state-of-the-art accuracy, its speed is so slow that it is not likely to be used in production. We therefore implement Fast-Bonito, which introduces systematic optimization to speed up Bonito. Fast-Bonito archives 53.8% faster than the original version on NVIDIA V100 and could be further speed up by HUAWEI Ascend 910 NPU, achieving 565% faster than the original version. The accuracy of Fast-Bonito is also slightly higher than the original Bonito.

scholarly journals AmpliCoV: Rapid Whole-Genome Sequencing Using Multiplex PCR Amplification and Real-Time Oxford Nanopore MinION Sequencing Enables Rapid Variant Identification of SARS-CoV-2

2021 ◽  
Vol 12 ◽  
Author(s):  
Annika Brinkmann ◽  
Sophie-Luisa Ulm ◽  
Steven Uddin ◽  
Sophie Förster ◽  
Dominique Seifert ◽  
...  
Keyword(s):  
Whole Genome Sequencing ◽  
Real Time ◽  
Genome Sequencing ◽  
Phylogenetic Analyses ◽  
Diagnostic Methods ◽  
Virus Concentration ◽  
Sequence Information ◽  
Whole Genome ◽  
Oxford Nanopore ◽  
A Genome

Since the emergence of the Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2) in December 2019, the scientific community has been sharing data on epidemiology, diagnostic methods, and whole-genomic sequences almost in real time. The latter have already facilitated phylogenetic analyses, transmission chain tracking, protein modeling, the identification of possible therapeutic targets, timely risk assessment, and identification of novel variants. We have established and evaluated an amplification-based approach for whole-genome sequencing of SARS-CoV-2. It can be used on the miniature-sized and field-deployable sequencing device Oxford Nanopore MinION, with sequencing library preparation time of 10 min. We show that the generation of 50,000 total reads per sample is sufficient for a near complete coverage (&gt;90%) of the SARS-CoV-2 genome directly from patient samples even if virus concentration is low (Ct 35, corresponding to approximately 5 genome copies per reaction). For patient samples with high viral load (Ct 18–24), generation of 50,000 reads in 1–2 h was shown to be sufficient for a genome coverage of &gt;90%. Comparison to Illumina data reveals an accuracy that suffices to identify virus mutants. AmpliCoV can be applied whenever sequence information on SARS-CoV-2 is required rapidly, for instance for the identification of circulating virus mutants.

scholarly journals NanoR: a user-friendly R package to analyze and compare nanopore sequencing data

2019 ◽  
Author(s):  
Davide Bolognini ◽  
Niccolò Bartalucci ◽  
Alessandra Mingrino ◽  
Alessandro Maria Vannucchi ◽  
Alberto Magi
Keyword(s):  
Real Time ◽  
Low Cost ◽  
R Package ◽  
Sequencing Data ◽  
High Performing ◽  
Dna And Rna ◽  
Oxford Nanopore ◽  
The One ◽  
User Friendly ◽  
Oxford Nanopore Technologies

AbstractMinION and GridION X5 from Oxford Nanopore Technologies are devices for real-time DNA and RNA sequencing. On the one hand, MinION is the only real-time, low cost and portable sequencing device and, thanks to its unique properties, is becoming more and more popular among biologists; on the other, GridION X5, mainly for its costs, is less widespread but highly suitable for researchers with large sequencing projects. Despite the fact that Oxford Nanopore Technologies’ devices have been increasingly used in the last few years, there is a lack of high-performing and user-friendly tools to handle the data outputted by both MinION and GridION X5 platforms. Here we present NanoR, a cross-platform R package designed with the purpose to simplify and improve nanopore data visualization. Indeed, NanoR is built on few functions but overcomes the capabilities of existing tools to extract meaningful informations from MinION sequencing data; in addition, as exclusive features, NanoR can deal with GridION X5 sequencing outputs and allows comparison of both MinION and GridION X5 sequencing data in one command. NanoR is released as free package for R at https://github.com/davidebolo1993/NanoR.

scholarly journals Accurate detection of m6A RNA modifications in native RNA sequences

2019 ◽  
Author(s):  
Huanle Liu ◽  
Oguzhan Begik ◽  
Morghan C Lucas ◽  
Christopher E. Mason ◽  
Schraga Schwartz ◽  
...  
Keyword(s):  
Rna Modifications ◽  
Rna Sequences ◽  
Single Nucleotide ◽  
Rna Molecules ◽  
Base Calling ◽  
Oxford Nanopore ◽  
Nucleotide Resolution ◽  
The Universe ◽  
Oxford Nanopore Technologies ◽  
Single Nucleotide Resolution

ABSTRACTThe field of epitranscriptomics has undergone an enormous expansion in the last few years; however, a major limitation is the lack of generic methods to map RNA modifications transcriptome-wide. Here we show that using Oxford Nanopore Technologies, N6-methyladenosine (m6A) RNA modifications can be detected with high accuracy, in the form of systematic errors and decreased base-calling qualities. Our results open new avenues to investigate the universe of RNA modifications with single nucleotide resolution, in individual RNA molecules.

scholarly journals Availability of Nanopore sequences in the genome taxonomy for Vibrionaceae systematics: Rumoiensis clade species as a test case

PeerJ ◽  
2018 ◽  
Vol 6 ◽  
pp. e5018 ◽  
Author(s):  
Mami Tanaka ◽  
Sayaka Mino ◽  
Yoshitoshi Ogura ◽  
Tetsuya Hayashi ◽  
Tomoo Sawabe
Keyword(s):  
Dna Hybridization ◽  
Cost Effective ◽  
Whole Genome Sequence ◽  
Test Case ◽  
Bacterial Taxonomy ◽  
Bacterial Genomes ◽  
Sequence Comparisons ◽  
Oxford Nanopore ◽  
Hybrid Assemblies ◽  
Oxford Nanopore Technologies

Whole genome sequence comparisons have become essential for establishing a robust scheme in bacterial taxonomy. To generalize this genome-based taxonomy, fast, reliable, and cost-effective genome sequencing methodologies are required. MinION, the palm-sized sequencer from Oxford Nanopore Technologies, enables rapid sequencing of bacterial genomes using minimal laboratory resources. Here we tested the ability of Nanopore sequences for the genome-based taxonomy of Vibrionaceae and compared Nanopore-only assemblies to complete genomes of five Rumoiensis clade species: Vibrio aphrogenes, V. algivorus, V. casei, V. litoralis, and V. rumoiensis. Comparison of overall genome relatedness indices (OGRI) and multilocus sequence analysis (MLSA) based on Nanopore-only assembly and Illumina or hybrid assemblies revealed that errors in Nanopore-only assembly do not influence average nucleotide identity (ANI), in silico DNA-DNA hybridization (DDH), G+C content, or MLSA tree topology in Vibrionaceae. Our results show that the genome sequences from Nanopore-based approach can be used for rapid species identification based on the OGRI and MLSA.

Sign in / Sign up

Export Citation Format

Share Document