Phase-Shifting Electron Holography for Accurate Measurement of Potential Distributions in Organic and Inorganic Semiconductors

Microscopy ◽  
2020 ◽  
Author(s):  
Kazuo Yamamoto ◽  
Satoshi Anada ◽  
Takeshi Sato ◽  
Noriyuki Yoshimoto ◽  
Tsukasa Hirayama

Abstract Phase-shifting electron holography (PS-EH) is an interference transmission electron microscopy technique that accurately visualizes potential distributions in functional materials, such as semiconductors. In this paper, we briefly introduce the features of the PS-EH that overcome some of the issues facing the conventional EH based on Fourier transformation. Then, we present a high-precision PS-EH technique with multiple electron biprisms and a sample preparation technique using a cryo-focused-ion-beam, which are important techniques for the accurate phase measurement of semiconductors. We present several applications of PS-EH to demonstrate the potential in organic and inorganic semiconductors and then discuss the differences by comparing them with previous reports on the conventional EH. We show that in situ biasing PS-EH was able to observe not only electric potential distribution but also electric field and charge density at a GaAs p-n junction and clarify how local band structures, depletion layer widths, and space charges changed depending on the biasing conditions. Moreover, the PS-EH clearly visualized the local potential distributions of two-dimensional electron gas (2DEG) layers formed at AlGaN/GaN interfaces with different Al compositions. We also report the results of our PS-EH application for organic electroluminescence (OEL) multilayers and point out the significant potential changes in the layers. The proposed PS-EH enables more precise phase measurement compared to the conventional EH, and our findings introduced in this paper will contribute to the future research and development of high-performance semiconductor materials and devices.

Microscopy ◽  
2019 ◽  
Vol 69 (1) ◽  
pp. 1-10 ◽  
Author(s):  
Kazuo Yamamoto ◽  
Kiyotaka Nakano ◽  
Atsushi Tanaka ◽  
Yoshio Honda ◽  
Yuto Ando ◽  
...  

Abstract Phase-shifting electron holography (PS-EH) using a transmission electron microscope (TEM) was applied to visualize layers with different concentrations of carriers activated by Si (at dopant levels of 1019, 1018, 1017 and 1016 atoms cm−3) in n-type GaN semiconductors. To precisely measure the reconstructed phase profiles in the GaN sample, three electron biprisms were used to obtain a series of high-contrast holograms without Fresnel fringes generated by a biprism filament, and a cryo-focused-ion-beam (cryo-FIB) was used to prepare a uniform TEM sample with less distortion in the wide field of view. All layers in a 350-nm-thick TEM sample were distinguished with 1.8-nm spatial resolution and 0.02-rad phase-resolution, and variations of step width in the phase profile (corresponding to depletion width) at the interfaces between the layers were also measured. Thicknesses of the active and inactive layers at each dopant level were estimated from the observed phase profile and the simulation of theoretical band structure. Ratio of active-layer thickness to total thickness of the TEM sample significantly decreased as dopant concentration decreased; thus, a thicker TEM sample is necessary to visualize lower carrier concentrations; for example, to distinguish layers with dopant concentrations of 1016 and 1015 atoms cm−3. It was estimated that sample thickness must be more than 700 nm to make it be possible to detect sub-layers by the combination of PS-EH and cryo-FIB.


Author(s):  
K. Doong ◽  
J.-M. Fu ◽  
Y.-C. Huang

Abstract The specimen preparation technique using focused ion beam (FIB) to generate cross-sectional transmission electron microscopy (XTEM) samples of chemical vapor deposition (CVD) of Tungsten-plug (W-plug) and Tungsten Silicides (WSix) was studied. Using the combination method including two axes tilting[l], gas enhanced focused ion beam milling[2] and sacrificial metal coating on both sides of electron transmission membrane[3], it was possible to prepare a sample with minimal thickness (less than 1000 A) to get high spatial resolution in TEM observation. Based on this novel thinning technique, some applications such as XTEM observation of W-plug with different aspect ratio (I - 6), and the grain structure of CVD W-plug and CVD WSix were done. Also the problems and artifacts of XTEM sample preparation of high Z-factor material such as CVD W-plug and CVD WSix were given and the ways to avoid or minimize them were suggested.


Author(s):  
Jim B. Colvin

Abstract A new method of preparation will be shown which allows traditional fixturing such as test heads and probe stations to be utilized in a normal test mode. No inverted boards cabled to a tester are needed since the die remains in its original package and is polished and rebonded to a new package carrier with the polished side facing upward. A simple pin reassignment is all that is needed to correct the reverse wire sequence after wire to wire bonding or wire to frame bonding in the new package frame. The resulting orientation eliminates many of the problems of backside microscopy since the resulting package orientation is now frontside. The low profile as a result of this technique allows short working distance objectives such as immersion lenses to be used across the die surface. Test equipment can be used in conjunction with analytical tools such as the emission microscope or focused ion beam due to the upright orientation of the polished backside silicon. The relationship between silicon thickness and transmission for various wavelengths of light will be shown. This preparation technique is applicable to advanced packaging methods and has the potential to become part of future assembly processes.


2009 ◽  
Vol 233 (1) ◽  
pp. 102-113 ◽  
Author(s):  
D. COOPER ◽  
R. TRUCHE ◽  
A.C. TWITCHETT-HARRISON ◽  
R.E. DUNIN-BORKOWSKI ◽  
P.A. MIDGLEY

2008 ◽  
Vol 104 (6) ◽  
pp. 064513 ◽  
Author(s):  
David Cooper ◽  
Cyril Ailliot ◽  
Robert Truche ◽  
Jean-Paul Barnes ◽  
Jean-Michel Hartmann ◽  
...  

2008 ◽  
Vol 22 (31n32) ◽  
pp. 6118-6123 ◽  
Author(s):  
SUNG-WON YOUN ◽  
CHIEKO OKUYAMA ◽  
MASHARU TAKAHASHI ◽  
RYUTARO MAEDA

Glass hot-embossing is one of essential techniques for the development of high-performance optical, bio, and chemical micro electromechanical system (MEMS) devices. This method is convenient, does not require routine access to clean rooms and photolithographic equipment, and can be used to produce multiple copies of a quartz mold as well as a MEMS component. In this study, quartz molds were prepared by hot-embossing with the glassy carbon (GC) masters, and they were applied to the hot-emboss of borosilicate glasses. The GC masters were prepared by dicing and focused ion beam (FIB) milling techniques. Additionally, the surfaces of the embossed quartz molds were coated with molybdenum barrier layers before embossing borosilicate glasses. As a result, micro-hot-embossed structures could be developed in borosilicate glasses with high fidelity by hot embossing with quartz molds.


Author(s):  
C.S. Bonifacio ◽  
P. Nowakowski ◽  
R. Li ◽  
M.L. Ray ◽  
P.E. Fischione ◽  
...  

Abstract Fast and accurate examination from the bulk to the specific area of the defect in advanced semiconductor devices is critical in failure analysis. This work presents the use of Ar ion milling methods in combination with Ga focused ion beam (FIB) milling as a cutting-edge sample preparation technique from the bulk to specific areas by FIB lift-out without sample-preparation-induced artifacts. The result is an accurately delayered sample from which electron-transparent TEM specimens of less than 15 nm are obtained.


2013 ◽  
Vol 28 (12) ◽  
pp. 125013 ◽  
Author(s):  
David Cooper ◽  
Pierrette Rivallin ◽  
Georges Guegan ◽  
Christophe Plantier ◽  
Eric Robin ◽  
...  

2004 ◽  
Vol 214 (3) ◽  
pp. 287-296 ◽  
Author(s):  
A. C. TWITCHETT ◽  
R. E. DUNIN-BORKOWSKI ◽  
R. J. HALLIFAX ◽  
R. F. BROOM ◽  
P. A. MIDGLEY

Sign in / Sign up

Export Citation Format

Share Document