scholarly journals Non-invasive imaging reveals convergence in root and stem vulnerability to cavitation across five tree species

2020 ◽  
Vol 71 (20) ◽  
pp. 6623-6637
Author(s):  
Jennifer M R Peters ◽  
Alice Gauthey ◽  
Rosana Lopez ◽  
Madeline R Carins-Murphy ◽  
Timothy J Brodribb ◽  
...  
Keyword(s):  
Tree Species ◽  
Plant Responses ◽  
Cedrus Deodara ◽  
Non Invasive ◽  
Stress Vulnerability ◽  
Vulnerability To Cavitation ◽  
Wide Range ◽  
Eucalyptus Crebra ◽  
The Difference ◽  
Acacia Aneura

Abstract Root vulnerability to cavitation is challenging to measure and under-represented in current datasets. This gap limits the precision of models used to predict plant responses to drought because roots comprise the critical interface between plant and soil. In this study, we measured vulnerability to drought-induced cavitation in woody roots and stems of five tree species (Acacia aneura, Cedrus deodara, Eucalyptus crebra, Eucalytus saligna, and Quercus palustris) with a wide range of xylem anatomies. X-ray microtomography was used to visualize the accumulation of xylem embolism in stems and roots of intact plants that were naturally dehydrated to varying levels of water stress. Vulnerability to cavitation, defined as the water potential causing a 50% loss of hydraulic function (P50), varied broadly among the species (–4.51 MPa to –11.93 MPa in stems and –3.13 MPa to –9.64 MPa in roots). The P50 of roots and stems was significantly related across species, with species that had more vulnerable stems also having more vulnerable roots. While there was strong convergence in root and stem vulnerability to cavitation, the P50 of roots was significantly higher than the P50 of stems in three species. However, the difference in root and stem vulnerability for these species was small; between 1% and 31% of stem P50. Thus, while some differences existed between organs, roots were not dramatically more vulnerable to embolism than stems, and the differences observed were less than those reported in previous studies. Further study is required to evaluate the vulnerability across root orders and to extend these conclusions to a greater number of species and xylem functional types.

Usefulness of transcutaneous bilirubin assessment measured in non-photo-exposed skin to guide the length of phototherapy: an observational study

2019 ◽  
Vol 47 (5) ◽  
pp. 568-573 ◽  
Author(s):  
Abdón Castro ◽  
Carlos Zozaya ◽  
Mª Teresa Cuesta ◽  
Marina González ◽  
Gema Villar ◽  
...  
Keyword(s):  
Serum Bilirubin ◽  
Total Serum ◽  
Skin Area ◽  
Correct Treatment ◽  
Transcutaneous Bilirubin ◽  
Non Invasive ◽  
Exposed Skin ◽  
Wide Range ◽  
The Difference ◽  
Mean Differences

Abstract Background Transcutaneous bilirubinometers are a non-invasive tool to estimate serum bilirubin. However, once on phototherapy (PHT) and after PHT, its usefulness is precluded. The objective of this study was to prove the hypothesis that transcutaneous bilirubin (TcB) assessment in a covered skin area during PHT could be used to guide the duration of PHT in term and moderate-late preterm infants with non-isoimmune hyperbilirubinemia. Methods A small area of parasternal skin was covered before starting on PHT. Total serum and TcB (both in exposed and non-exposed areas) were determined before starting treatment, every 12 h once on PHT and 12 h after its discontinuation. Pearson’s correlation coefficient and paired mean differences between TcB and total serum bilirubin (TSB) were calculated. Bland-Altman plots were obtained. The percentage of correct treatment decisions made based on non-exposed TcB values was calculated. Results During PHT, there was a relatively good correlation between TSB and non-exposed TcB (0.74) estimates, in contrast to exposed TcB estimates (0.52). However, even when comparing non-exposed TcB with TSB, there was a wide range of agreement limits (−3.8 to 4.6 mg/dL). Decisions based on non-exposed TcB values would have been incorrect in 26.6% of the cases. Conclusion Although there is a relatively strong correlation between total serum and TcB in non-PHT-exposed regions, the difference is not narrow enough to be utilized in guiding clinical decisions on the duration of PHT.

Comparative Effects of High-Tech Visual Scene Displays and Low-Tech Isolated Picture Symbols on Engagement From Students With Multiple Disabilities

2019 ◽  
Vol 50 (4) ◽  
pp. 693-702 ◽  
Author(s):  
Christine Holyfield ◽  
Sydney Brooks ◽  
Allison Schluterman
Keyword(s):  
Language Learning ◽  
Augmentative And Alternative Communication ◽  
Visual Analysis ◽  
Multiple Disabilities ◽  
Visual Scene ◽  
Future Research ◽  
High Tech ◽  
Single Subject ◽  
Wide Range ◽  
The Difference

Purpose Augmentative and alternative communication (AAC) is an intervention approach that can promote communication and language in children with multiple disabilities who are beginning communicators. While a wide range of AAC technologies are available, little is known about the comparative effects of specific technology options. Given that engagement can be low for beginning communicators with multiple disabilities, the current study provides initial information about the comparative effects of 2 AAC technology options—high-tech visual scene displays (VSDs) and low-tech isolated picture symbols—on engagement. Method Three elementary-age beginning communicators with multiple disabilities participated. The study used a single-subject, alternating treatment design with each technology serving as a condition. Participants interacted with their school speech-language pathologists using each of the 2 technologies across 5 sessions in a block randomized order. Results According to visual analysis and nonoverlap of all pairs calculations, all 3 participants demonstrated more engagement with the high-tech VSDs than the low-tech isolated picture symbols as measured by their seconds of gaze toward each technology option. Despite the difference in engagement observed, there was no clear difference across the 2 conditions in engagement toward the communication partner or use of the AAC. Conclusions Clinicians can consider measuring engagement when evaluating AAC technology options for children with multiple disabilities and should consider evaluating high-tech VSDs as 1 technology option for them. Future research must explore the extent to which differences in engagement to particular AAC technologies result in differences in communication and language learning over time as might be expected.

Biscogniauxia (Hypoxylon) Canker or Dieback in Trees

EDIS ◽  
2017 ◽  
Vol 2017 (6) ◽  
Author(s):  
Claudia Paez ◽  
Jason A. Smith
Keyword(s):  
Water Stress ◽  
Tree Species ◽  
Soil Compaction ◽  
Urban Areas ◽  
Root Disease ◽  
Poor Health ◽  
Green Spaces ◽  
Opportunistic Pathogens ◽  
Wide Range ◽  
Quercus Spp

Biscogniauxia canker or dieback (formerly called Hypoxylon canker or dieback) is a common contributor to poor health and decay in a wide range of tree species (Balbalian & Henn 2014). This disease is caused by several species of fungi in the genus Biscogniauxia (formerly Hypoxylon). B. atropunctata or B. mediterranea are usually the species found on Quercus spp. and other hosts in Florida, affecting trees growing in many different habitats, such as forests, parks, green spaces and urban areas (McBride & Appel, 2009).  Typically, species of Biscogniauxia are opportunistic pathogens that do not affect healthy and vigorous trees; some species are more virulent than others. However, once they infect trees under stress (water stress, root disease, soil compaction, construction damage etc.) they can quickly colonize the host. Once a tree is infected and fruiting structures of the fungus are evident, the tree is not likely to survive especially if the infection is in the tree's trunk (Anderson et al., 1995).

COMBINATORIAL POLYNOMIALLY COMPUTABLE CHARACTERISTICS OF SUBSTITUTIONS AND THEIR PROPERTIES

2020 ◽  
Vol 7 (2) ◽  
pp. 34-41
Author(s):  
VLADIMIR NIKONOV ◽  
◽  
ANTON ZOBOV ◽  
Keyword(s):  
Mathematical Expectation ◽  
Point Of View ◽  
Small Range ◽  
Computational Point ◽  
Wide Range ◽  
Bijective Function ◽  
The Difference ◽  
Element Base ◽  
Selection Of

The construction and selection of a suitable bijective function, that is, substitution, is now becoming an important applied task, particularly for building block encryption systems. Many articles have suggested using different approaches to determining the quality of substitution, but most of them are highly computationally complex. The solution of this problem will significantly expand the range of methods for constructing and analyzing scheme in information protection systems. The purpose of research is to find easily measurable characteristics of substitutions, allowing to evaluate their quality, and also measures of the proximity of a particular substitutions to a random one, or its distance from it. For this purpose, several characteristics were proposed in this work: difference and polynomial, and their mathematical expectation was found, as well as variance for the difference characteristic. This allows us to make a conclusion about its quality by comparing the result of calculating the characteristic for a particular substitution with the calculated mathematical expectation. From a computational point of view, the thesises of the article are of exceptional interest due to the simplicity of the algorithm for quantifying the quality of bijective function substitutions. By its nature, the operation of calculating the difference characteristic carries out a simple summation of integer terms in a fixed and small range. Such an operation, both in the modern and in the prospective element base, is embedded in the logic of a wide range of functional elements, especially when implementing computational actions in the optical range, or on other carriers related to the field of nanotechnology.

Role of Cardiac MRI in Detecting Familial Hypertrophic Cardiomyopathy: Review

2016 ◽  
Vol 1 (1) ◽  
pp. 4
Author(s):  
Marymol Koshy ◽  
Bushra Johari ◽  
Mohd Farhan Hamdan ◽  
Mohammad Hanafiah
Keyword(s):  
Hypertrophic Cardiomyopathy ◽  
Magnetic Resonance ◽  
Genetic Disorder ◽  
Familial Hypertrophic Cardiomyopathy ◽  
Non Invasive ◽  
Wide Range ◽  
Proper Diagnosis ◽  
Magnetic Resonance Imaging Mri ◽  
Potential Use

Hypertrophic cardiomyopathy (HCM) is a global disease affecting people of various ethnic origins and both genders. HCM is a genetic disorder with a wide range of symptoms, including the catastrophic presentation of sudden cardiac death. Proper diagnosis and treatment of this disorder can relieve symptoms and prolong life. Non-invasive imaging is essential in diagnosing HCM. We present a review to deliberate the potential use of cardiac magnetic resonance (CMR) imaging in HCM assessment and also identify the risk factors entailed with risk stratification of HCM based on Magnetic Resonance Imaging (MRI).

Generalized Heterodyne Configurations for Photo-induced Force Microscopy

2019 ◽  
Author(s):  
Le Wang ◽  
Devon Jakob ◽  
Haomin Wang ◽  
Alexis Apostolos ◽  
Marcos M. Pires ◽  
...  
Keyword(s):  
Spatial Resolution ◽  
Repetition Rate ◽  
Modulation Frequency ◽  
High Harmonic ◽  
Chemical Imaging ◽  
Heterodyne Detection ◽  
Force Microscopy ◽  
Wide Range ◽  
The Difference ◽  
Afm Cantilever

<div>Infrared chemical microscopy through mechanical probing of light-matter interactions by atomic force microscopy (AFM) bypasses the diffraction limit. One increasingly popular technique is photo-induced force microscopy (PiFM), which utilizes the mechanical heterodyne signal detection between cantilever mechanical resonant oscillations and the photo induced force from light-matter interaction. So far, photo induced force microscopy has been operated in only one heterodyne configuration. In this article, we generalize heterodyne configurations of photoinduced force microscopy by introducing two new schemes: harmonic heterodyne detection and sequential heterodyne detection. In harmonic heterodyne detection, the laser repetition rate matches integer fractions of the difference between the two mechanical resonant modes of the AFM cantilever. The high harmonic of the beating from the photothermal expansion mixes with the AFM cantilever oscillation to provide PiFM signal. In sequential heterodyne detection, the combination of the repetition rate of laser pulses and polarization modulation frequency matches the difference between two AFM mechanical modes, leading to detectable PiFM signals. These two generalized heterodyne configurations for photo induced force microscopy deliver new avenues for chemical imaging and broadband spectroscopy at ~10 nm spatial resolution. They are suitable for a wide range of heterogeneous materials across various disciplines: from structured polymer film, polaritonic boron nitride materials, to isolated bacterial peptidoglycan cell walls. The generalized heterodyne configurations introduce flexibility for the implementation of PiFM and related tapping mode AFM-IR, and provide possibilities for additional modulation channel in PiFM for targeted signal extraction with nanoscale spatial resolution.</div>

scholarly journals Effects of Temperature on Anoplophora chinensis (Coleoptera: Cerambycidae) Adult Survival, Reproduction, and Egg Hatch

Forests ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 432 ◽  
Author(s):  
Melody A. Keena ◽  
Paul M. Moore ◽  
Gregg Bradford
Keyword(s):  
Invasive Species ◽  
Tree Species ◽  
Adult Survival ◽  
Optimum Temperature ◽  
Egg Hatch ◽  
Laboratory Conditions ◽  
Wide Range ◽  
Survival And Reproduction ◽  
Summer Temperatures ◽  
Effects Of Temperature

Anoplophora chinensis (Forster) is an invasive species that can damage many tree species in orchard, urban, and forested habitats. Adult survival, reproduction, and egg hatch of A. chinensis from Italy and China are evaluated at eight constant temperatures (5, 10, 15, 20, 25, 30, 35, and 40 °C) under laboratory conditions. The estimated Tmax for longevity was 42 and 33 °C for females and 42 and 39 °C for males from China and Italy, respectively. The estimated Tmax, Tmin, and optimum temperature for fecundity were 35, 9, and 29 °C, respectively. Females laid eggs at 15–30 °C and eggs hatched at 15–35 °C. Days to first oviposition increased exponentially from 13 days at 30 °C to >300 days near 10 °C. The estimated Tmin for egg hatch was 13 °C, the Tmax at 38 °C, and the optimum 29 °C. Percentage hatch was estimated to be highest at 26 °C and have a Tmax of 31 °C and Tmin of 10 °C. These results indicate that summer temperatures over a wide range of latitudes should support beetle survival and reproduction, but at temperatures ≥35 °C, oviposition ceases, and adult survivorship declines. In addition, females may survive into the fall, but lay fewer eggs that may not hatch. These responses of A. chinensis to temperature can be used for developing phenological models to predict the timing of stages for management or eradication efforts.

scholarly journals Natural Science and Supernatural Thought Experiments

Religions ◽  
2019 ◽  
Vol 10 (6) ◽  
pp. 389
Author(s):  
James Robert Brown
Keyword(s):  
Natural Science ◽  
Thought Experiment ◽  
Thought Experiments ◽  
The Other ◽  
Space And Time ◽  
Wide Range ◽  
The Difference ◽  
Theological Thought

Religious notions have long played a role in epistemology. Theological thought experiments, in particular, have been effective in a wide range of situations in the sciences. Some of these are merely picturesque, others have been heuristically important, and still others, as I will argue, have played a role that could be called essential. I will illustrate the difference between heuristic and essential with two examples. One of these stems from the Newton–Leibniz debate over the nature of space and time; the other is a thought experiment of my own constructed with the aim of making a case for a more liberal view of evidence in mathematics.

An experimental assessment of the evaporation correlations for natural, forced and combined convection regimes

2011 ◽  
Vol 226 (1) ◽  
pp. 145-153 ◽  
Author(s):  
A Jodat ◽  
M Moghiman
Keyword(s):  
Mixed Convection ◽  
Forced Convection ◽  
Evaporation Rate ◽  
Density Variation ◽  
Convection Regime ◽  
Combined Convection ◽  
Wide Range ◽  
The Difference ◽  
Rate Of Evaporation ◽  
Evaporation Models

In the present study, the applicability of widely used evaporation models (Dalton approach-based correlations) is experimentally investigated for natural, forced, and combined convection regimes. A series of experimental measurements are carried out over a wide range of water temperatures and air velocities for 0.01 ≤ Gr/Re2 ≤ 100 in a heated rectangular pool. The investigations show that the evaporation rate strongly depends on the convection regime's Gr/ Re2 value. The results show that the evaporation rate increases with the difference in vapour pressures over both forced convection (0.01 ≤ Gr/Re2 ≤ 0.1) and turbulent mixed convection regimes (0.15 ≤ Gr/Re2 ≤ 25). However, the escalation rate of evaporation decreases with Gr/ Re2 in the forced convection regime whereas in the turbulent mixed convection it increases. In addition, over the range of the free convection regime ( Gr/Re2 ≥ 25), the evaporation rate is affected not only by the vapour pressure difference but also by the density variation. A dimensionless correlation using the experimental data of all convection regimes (0.01 ≤ Gr/Re2 ≤ 100) is proposed to cover different water surface geometries and airflow conditions.

scholarly journals Non-invasive sensing for food reassurance

The Analyst ◽  
2016 ◽  
Vol 141 (5) ◽  
pp. 1587-1610 ◽  
Author(s):  
Zou Xiaobo ◽  
Huang Xiaowei ◽  
Malcolm Povey
Keyword(s):  
Chemical Composition ◽  
Physicochemical Properties ◽  
Food Quality ◽  
Physical Principle ◽  
Quality Traits ◽  
X Ray ◽  
Main Food ◽  
Non Invasive ◽  
Wide Range ◽  
Nutritional Characteristics

The main food quality traits of interest using non-invasive sensing techniques are sensory characteristics, chemical composition, physicochemical properties, health-protecting properties, nutritional characteristics and safety. A wide range of non-invasive sensing techniques, from optical, acoustical, electrical, to nuclear magnetic, X-ray, biosensor, microwave and terahertz, are organized according to physical principle.

Sign in / Sign up

Export Citation Format

Share Document