Truth and Truthlikeness

Author(s):  
Graham Oddie

Truth is widely held to be a cognitive value—perhaps because, other things being equal, it is better to believe a proposition if it is true than if it is false. But even if this is a genuine aspect of the value of truth, it is rather coarse-grained. Not all truths are equally valuable, from a cognitive point of view, and neither are all falsehoods equally disvaluable. The concept of truthlikeness, or of closeness to the truth, holds out the promise of a richer, more fine-grained classification of propositions, suitable not just for the up or down evaluation of isolated beliefs, but for the calibrated evaluation of cognitive progress in an inquiry. This chapter reviews approaches to truthlikeness, and some of the problems they face.

Hydrocarbon gels contain a number of materials, such as rubber, greases, saponified mineral oils, etc., of great interest for various engineering purposes. Specific requirements in mechanical properties have been met by producing gels in appropriately chosen patterns of constituent components of visible, colloidal, molecular and atomic sizes, ranging from coarse-grained aggregates, represented by sponges, foams, emulsions, etc.; to fine-grained and apparently homogeneous ones, represented by optically clear compounds. The engineer who has to deal with the whole range of such materials will adopt a macroscopic point of view, based on an apparent continuity of all the material structures and of the distributions in space and time of the displacements and forces occurring under mechanical actions. It has been possible to determine these distributions in the framework of a comprehensive scheme in which the fundamental principles of the mechanics of continuous media provide the theoretical basis, and a testing instrument of new design, termed Rheogoniometer, the means of experimental measurement (Weissenberg 1931, 1934, 1946, 1947, 1948).


2021 ◽  
Vol 9 (11) ◽  
pp. 289-301
Author(s):  
Koffi Chiaye Larissa ◽  
◽  
Djeya Kouame Leger ◽  
Douzo Jolie Wanesse Danielle ◽  
Monde Sylvain ◽  
...  

The KL block studies was carried out the eastern part of the San Pedro margin, it has an area of 2034 km2 with a water depth varying from 500 to 2750 m with two probings (K1 and K2).The objective of this work is to carry out a biostratigraphic and paleoenvironmental study based on the associations of planktonic and palynomorphicmicrofauna in the formations of the KL block boreholes. From a lithological point of view, the base of the boreholes generally comprises alternating limestone and argillite, very fine to fine grained quartz sandstone. Its upper part is overlain by claystoneinterbedded with limestone, silstone and siliceous cemented sandstone and alternating claystone, medium to coarse grained sand and siliceous cemented quartz sandstone. The Albian is determined by the presence of the species Ticinellamadecassiana. The Cenomanian is identified by the micropalaeontological assemblages composed of Globigerinelloides spp., Guembelitria spp., Hedbergella spp., Hedbergelladelrioensis, Globigerinelloides bentonensisandLoeblichella cf. hessi. The Turonian is based mainly on the species Hedbergellaplanispira, Heterohelixmoremani and Whiteinella archaeocretacea. The Early Senonian is characterized by associations of species (Hedbergellasp, Hedbergella cf. delrioensis, Buliminacrassa and Whiteinella baltica) and palynomorphs (Proteaciditestienabaensis, Odontochitinacostata, Odontochitinaporiferaand Tricolpites sp). The roof of the Campanian is known by the association of the palynomorph (Trichodinium castanae) and the microfossil (Gaudryina cretacea) The Maastrichtian is highlighted by the associations composed of species Rzehakina epigona fissistomata, Rzehakina minima, Plectina lenis, Reophax duplex, Reophax pilulifera, Reophax globosus, Gaudryina pyramidata and Afrobolivina afra) and palynomorphic species (Andalusiella gabonensis, Cerodinium granulostriatum and Palaeocystodinium australinium). All the micropalaeontological data coupled with those of the microfaunas make it possible to envisage a depositional environment of the internal platform type with continental influence on an external platform.


Soil texture and soil structure are both unique properties of soil that have profound effects on their behavior. The index properties commonly used for coarse-grained soils are grain size distribution and relative density. Index properties of fine-grained soils include consistency and sensitivity. These properties of a soil indicate the type and conditions of the soil and provide a relationship to its structural properties such as strength, compressibility, permeability, swelling potential, etc. Brief descriptions of some of these properties are given in this chapter. Towards the end, the chapter shows how these properties can be used for the classification of soils. The Soil Classification Systems considered include the following: Geological and Pedological Classification Systems (Classification by Origin and by Pedology), Morphological Classification Systems (Classification by Appearance and Textural Soil Classification System [USDA]), and Classification by Use (American Association of State Highway Transportation Officials System [AASHTO] and Unified Soil Classification System [USCS]).


Author(s):  
Wang Zheng-fang ◽  
Z.F. Wang

The main purpose of this study highlights on the evaluation of chloride SCC resistance of the material,duplex stainless steel,OOCr18Ni5Mo3Si2 (18-5Mo) and its welded coarse grained zone(CGZ).18-5Mo is a dual phases (A+F) stainless steel with yield strength:512N/mm2 .The proportion of secondary Phase(A phase) accounts for 30-35% of the total with fine grained and homogeneously distributed A and F phases(Fig.1).After being welded by a specific welding thermal cycle to the material,i.e. Tmax=1350°C and t8/5=20s,microstructure may change from fine grained morphology to coarse grained morphology and from homogeneously distributed of A phase to a concentration of A phase(Fig.2).Meanwhile,the proportion of A phase reduced from 35% to 5-10°o.For this reason it is known as welded coarse grained zone(CGZ).In association with difference of microstructure between base metal and welded CGZ,so chloride SCC resistance also differ from each other.Test procedures:Constant load tensile test(CLTT) were performed for recording Esce-t curve by which corrosion cracking growth can be described, tf,fractured time,can also be recorded by the test which is taken as a electrochemical behavior and mechanical property for SCC resistance evaluation. Test environment:143°C boiling 42%MgCl2 solution is used.Besides, micro analysis were conducted with light microscopy(LM),SEM,TEM,and Auger energy spectrum(AES) so as to reveal the correlation between the data generated by the CLTT results and micro analysis.


Author(s):  
I. R. Khuzina ◽  
V. N. Komarov

The paper considers a point of view, based on the conception of the broad understanding of taxons. According to this point of view, rhyncholites of the subgenus Dentatobeccus and Microbeccus are accepted to be synonymous with the genus Rhynchoteuthis, and subgenus Romanovichella is considered to be synonymous with the genus Palaeoteuthis. The criteria, exercising influence on the different approaches to the classification of rhyncholites, have been analyzed (such as age and individual variability, sexual dimorphism, pathological and teratological features, degree of disintegration of material), underestimation of which can lead to inaccuracy. Divestment of the subgenuses Dentatobeccus, Microbeccus and Romanovichella, possessing very bright morphological characteristics, to have an independent status and denomination to their synonyms, has been noted to be unjustified. An artificial system (any suggested variant) with all its minuses is a single probable system for rhyncholites. The main criteria, minimizing its negative sides and proving the separation of the new taxon, is an available mass-scale material. The narrow understanding of the genus, used in sensible limits, has been underlined to simplify the problem of the passing the view about the genus to the other investigators and recognition of rhyncholites for the practical tasks.


2020 ◽  
Vol 10 (2) ◽  
pp. 213-218
Author(s):  
OKSANA KOCHKINA ◽  
◽  
OLGA MARCHUK ◽  

The article examines the legal and moral and ethical aspects of a misdemeanor that discredits the honor of an employee of the criminal Executive system. The considered reason for dismissal has the main feature associated with the integration of legal and moral norms, which often raises a lot of questions about the attribution of a particular offense to this basis. Using the analysis of normative legal acts, the authors attempt to identify the signs that contribute to the separation of the studied grounds for dismissal from all their diversity. The classification of offenses that discredit the honor of an employee of the criminal Executive system is presented, which allows to systematize and organize the knowledge obtained about the considered grounds for dismissal. The analysis of a misdemeanor that defames the honor of an employee of the penal system from a moral and ethical position gives an understanding, first of all, that it does not have a clear regulation from the point of view of the law, but the consequences of committing such a misdemeanor are clearly legal. The concepts of “honor” and “dignity” are considered as ethical categories and are analyzed as personal qualities that are manifested in an employee of the penal correction system during the period of service. These categories in the behavior of a person or employee are manifested both externally (assessment from the outside) and internally (self-assessment). The article describes the value orientation of an employee of the criminal Executive system to ethical standards in professional activity, which is an integral part of the moral and ethical side of a misdemeanor that discredits the honor of an employee.


Author(s):  
Zuzana Kvetanová

The submitted study addresses the topic of the current state of the opinion journalism and its genres in the Slovak periodical press. The author draws attention to the question of classification of the opinion journalism of a rational and emotional type from the genre categorization point of view and, simultaneously, reflects on its application in the present journalistic practice. This brings a certain rate of confrontation between the defined theoretical premises and their subsequent practical (non-)implementation. The main objective of the study is to clarify the presence of genres of analytical and literary opinion journalism stated by media theory in the environment of the Slovak periodicals. Presentation of the basic terminological axis and the related explication of journalism genres included in the opinion journalism constitute the secondary objectives of the paper. For the purposes of achieving the set objectives, the author uses methods of logical analysis of text in combination with discourse analysis. Similarly, she predicts the evident presence of the phenomenon of hybridization in the Slovak journalistic practice.


2020 ◽  
pp. 66-74
Author(s):  
E. Zakablukovskiy

The article highlights certain aspects of the discussion on the topic of reductionism vs. holism in the philosophy of medicine. Classic radical reductionism is defeated by the concept of emergence. The s.c. bio-medical point of view on a malady, despite its relevance and clear benefit, is not recognized as universal as its adherents may claim, and it yields to an integral psycho-bio-social model. The author introduces a new classification of holism (vitalistic, social and individualistic) and makes appropriate recommendations to clinicians. It is social holism at the macro level that has proven effective in combating the spread of COVID-19.


2020 ◽  
pp. 65-75
Author(s):  
S. N. Smirnov

The author considers the problems of typification of society. Some concepts of typification of social stratification models in different countries formulated and justified in historical and legal, historical, sociological, and economic scientific literature are reviewed. The circumstances that make it difficult to formulate universal concepts designed for application in the complex of social Sciences are identified. These circumstances include insufficient consideration of legal factors, including the position of the legislator, the specifics of the corporate legal status, and the characteristics of the mechanism for changing individual legal status. The author offers a variant of classification of society types from the point of view of legal registration of their structure. The possibility of distinguishing types such as consolidated companies and segmented companies is justified.


2020 ◽  
Vol 5 (1) ◽  
pp. 243-251
Author(s):  
Akira Horibata ◽  
Tsuneo Kato

AbstractA total of 145 accessions of the genus Citrus and related genera, maintained in the Conservation Garden for Citrus Germplasm at the Experimental Farm of Kindai University, Yuasa, Wakayama, Japan, were examined for their phylogenetic relationships. The present classification was conducted using an inter-retrotransposon amplified polymorphism (IRAP) method based on the insertion polymorphism of a retrotransposon, CIRE1, identified in C. sinensis. The objective of this study was to evaluate the applicability of the IRAP method for citrus classification. The constructed dendrogram showed that the 145 accessions and two outgroup species were successfully classified into five major clades. A large number of C. sinensis accessions were divided into three traditional groups, navel orange, sweet orange, and blood orange, almost corresponding to the sub-clades in the dendrogram. Several other accessions belonging to the same species, and also many hybrid cultivars from crossbreeding, were localized into the respective sub-clades or near positions in the dendrogram. Several unclassified accessions could also be located in the dendrogram, suggesting novel relationships with other accessions. It was concluded that the IRAP method based on CIRE1 insertion polymorphism was suitable for the classification of citrus from a molecular point of view.


Sign in / Sign up

Export Citation Format

Share Document