Preparation of pod-shaped TiO
            2
            and Ag@TiO
            2
            nano burst tubes and their photocatalytic activity

The pod-shaped TiO 2 nano burst tubes (TiO 2 NBTs) were prepared by the combination of electrospinning and impregnation calcination with oxalic acid (H 2 C 2 O 4 ), polystyrene (PS) and tetrabutyl titanate. The silver nanoparticles (AgNPs) were loaded onto the surface of TiO 2 NBTs by ultraviolet light reduction method to prepare pod-shaped Ag@TiO 2 NBTs. In this work, we analysed the effect of the amount of oxalic acid on the cracking degree of TiO 2 NBTs; the effect of the concentration of AgNO 3 solution on the particle size and loading of AgNPs on the surface of TiO 2 NBTs. Scanning electron microscopy and transmission electron microscopy investigated the surface morphology of samples. X-ray diffraction and X-ray photoelectron spectroscopy characterized the structure and composition of samples. Rhodamine B (RhB) solution was used to evaluate the photocatalytic activity of pod-shaped TiO 2 NBTs and Ag@TiO 2 NBTs. The results showed that TiO 2 NBTs degraded 91.0% of RhB under ultraviolet light, Ag@TiO 2 NBTs degraded 95.5% under visible light for 75 and 60 min, respectively. The degradation process of both samples was consistent with the Langmuir–Hinshelwood first-order kinetic equation. Therefore, the catalytic performance of the sample is: Ag@TiO 2 NBTs > TiO 2 NBTs > TiO 2 nanotubes.

Download Full-text

Study on Synthesis and Photocatalytic Activity of Porous Titania Nanotubes

Advances in Materials Science and Engineering ◽

10.1155/2016/3532817 ◽

2016 ◽

Vol 2016 ◽

pp. 1-10 ◽

Cited By ~ 2

Author(s):

Huang Liu ◽

Yanhua Zhang ◽

Hongtao Yang ◽

Wei Xiao ◽

Lanlan Sun

Keyword(s):

Electron Microscopy ◽

Photocatalytic Activity ◽

Filter Paper ◽

Photoelectron Spectroscopy ◽

Diffuse Reflectance Spectroscopy ◽

Cellulose Nanofibers ◽

Titania Nanotubes ◽

Tetrabutyl Titanate ◽

X Ray ◽

Porous Titania

Using the common natural cellulose substance (filter paper) and triblock copolymer (Pluronic P123) micelles as dual templates, porous titania nanotubes with enhanced photocatalytic activity have been successfully synthesized through sol-gel methods. Firstly, P123 micelles were adsorbed onto the surfaces of cellulose nanofibers of filter paper, followed by hydrolysis and condensation of tetrabutyl titanate around these micelles to form titania layer. After calcination to remove the organic templates, hierarchical titania nanotubes with pores in the walls were obtained. The sample was characterized by X-ray diffraction pattern (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption/desorption, Fourier Transform Infrared Spectroscopy (FT-IR), Ultraviolet-Visible Diffuse Reflectance Spectroscopy (UV-Vis DRS), and X-ray photoelectron spectroscopy (XPS). As compared with commercial P25 catalyst, the porous titania nanotubes prepared by this method displayed significantly enhanced photocatalytic activity for degrading methyl orange under UV irradiation. Within 10 minutes, the porous titania nanotubes are able to degrade over 70% of the original MO, while the value for the commercial Degussa P25 is only about 33%.

Download Full-text

Preparation of g-C3N4/MoS2 Composite Material and Its Visible Light Catalytic Performance

10.21203/rs.3.rs-627855/v1 ◽

2021 ◽

Author(s):

Yu Fan ◽

Yan-ning Yang ◽

Chen Ding

Keyword(s):

Electron Microscopy ◽

Photocatalytic Activity ◽

Visible Light ◽

Photoelectron Spectroscopy ◽

Photogenerated Electron ◽

Catalytic Performance ◽

X Ray Diffraction ◽

X Ray ◽

Transmission Electron ◽

Calcination Method

Abstract The g-C3N4 nanosheet was prepared by calcination method, the MoS2 nanosheet was prepared by hydrothermal method. The g-C3N4/MoS2 composites were prepared by ultrasonic composite in anhydrous ethanol. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible spectroscopy (UV-Vis), and photoluminescence (PL) techniques were used to characterize the materials. The photocatalytic degradation of Rhodamine B (Rh B) by g-C3N4/MoS2 composites with different mass ratios was investigated under visible light. The results show that a small amount of MoS2 combined with g-C3N4 can significantly improve photocatalytic activity. The g-C3N4/MoS2 composite with a mass ratio of 1:8 has the highest photocatalytic activity, and the degradation rate of Rh B increases from 50% to 99.6%. The main reason is that MoS2 and g-C3N4 have a matching band structure. The separation rate of photogenerated electron-hole pairs is enhanced. So the g-C3N4/MoS2 composite can improve the photocatalytic activity. The photocatalytic mechanism was proposed through the active matter capture experiment.

Download Full-text

Fabrication of Novel Z-Scheme Bi2WO6/NaBiO3 Nanocomposites with Enhanced Photocatalytic Activity in the Degradation of 2,3-Dichlorophenol

Journal of Nanoscience and Nanotechnology ◽

10.1166/jnn.2020.17382 ◽

2020 ◽

Vol 20 (5) ◽

pp. 3105-3116 ◽

Cited By ~ 1

Author(s):

Xin-Yue Gu ◽

Qiu Wang ◽

Da-Peng Zhang ◽

Xin-Xiang Geng ◽

Zhen-Xing Zha ◽

...

Keyword(s):

Electron Microscopy ◽

Photocatalytic Activity ◽

Visible Light ◽

Photoelectron Spectroscopy ◽

Energy Dispersive Spectrometer ◽

Energy Levels ◽

Degradation Process ◽

Photoelectrochemical Performance ◽

X Ray ◽

Oxidative Species

The Z-scheme Bi2WO6/NaBiO3 nanocomposites were first fabricated by a facile hydrothermal method, and were then characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy, energy dispersive spectrometer, Fourier-transform-infrared spectroscopy, X-ray photoelectron spectroscopy and N2 adsorption–desorption. The as-prepared Bi2WO6/NaBiO3 nanocomposites exhibit outstanding photocatalytic activity and recyclability. A 98.4% photodegradation of 2,3-dichlorophenol (50 mg·L−1) was attained in the presence of Bi2WO6/NaBiO3 (1:10) under the visible-light irradiation in 30 min. In particular, the photocatalytic mechanism has been discussed in detail, based on four aspects: (1) oxidative species, (2) photoelectrochemical performance, (3) conduction band and valence band energy levels and (4) possible transition states and reactions. In conclusion, O−2 is the main active oxidative species in the Bi2WO6/NaBiO3 nanocomposite. The material has higher photocurrent and visible light adsorption but lower electron–hole pairs recombination, which contributes to distinguished photocatalytic efficiency. The Z-scheme photocatalytic path was proposed and the possible degradation process and routes have been summarized.

Download Full-text

The Preparation of Pd/Foam-Ni Electrode and Its Electrocatalytic Hydrodechlorination for Monochlorophenol Isomers

Catalysts ◽

10.3390/catal8090378 ◽

2018 ◽

Vol 8 (9) ◽

pp. 378 ◽

Cited By ~ 1

Author(s):

Junjing Li ◽

Huan Wang ◽

Liang Wang ◽

Chang Ma ◽

Cong Luan ◽

...

Keyword(s):

Electron Microscopy ◽

Photoelectron Spectroscopy ◽

Catalytic Performance ◽

Order Kinetic ◽

X Ray Diffraction ◽

X Ray ◽

Transmission Electron ◽

Order Kinetic Model ◽

Good Catalytic Activity ◽

Promising Application

Noble metal palladium modified foamed nickel electrode (Pd/foam-Ni) was prepared by electrodeposition method. The fabricated electrode showed better catalytic performance than the Pd/foam-Ni prepared by conventional electroless deposition. The catalysts were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). Electrocatalytic activity of the Pd/Ni was studied for the hydrodechlorination of monochlorophenol isomers. The Pd/Ni exhibited good catalytic activity for 3-chlorophenol (3-CP). Complete decomposition of chlorophenol isomers could be achieved within 2 h, and the hydrodechlorination process conformed to the pseudo-first-order kinetic model. It showed a supreme stability after recycling for 5 times. The Pd/Ni exhibited a promising application prospect with high effectiveness and low Pd loading.

Download Full-text

Enhanced Photocatalytic Activity of CuWO4 Doped TiO2 Photocatalyst Towards Carbamazepine Removal under UV Irradiation

Separations ◽

10.3390/separations8030025 ◽

2021 ◽

Vol 8 (3) ◽

pp. 25

Author(s):

Chukwuka Bethel Anucha ◽

Ilknur Altin ◽

Emin Bacaksız ◽

Tayfur Kucukomeroglu ◽

Masho Hilawie Belay ◽

...

Keyword(s):

Electron Microscopy ◽

Photocatalytic Activity ◽

Photoelectron Spectroscopy ◽

Diffuse Reflectance Spectroscopy ◽

Sol Gel ◽

Pure Tio2 ◽

Component Part ◽

Energy Yield ◽

Mechanical Agitation ◽

X Ray

Abatement of contaminants of emerging concerns (CECs) in water sources has been widely studied employing TiO2 based heterogeneous photocatalysis. However, low quantum energy yield among other limitations of titania has led to its modification with other semiconductor materials for improved photocatalytic activity. In this work, a 0.05 wt.% CuWO4 over TiO2 was prepared as a powder composite. Each component part synthesized via the sol-gel method for TiO2, and CuWO4 by co-precipitation assisted hydrothermal method from precursor salts, underwent gentle mechanical agitation. Homogenization of the nanopowder precursors was performed by zirconia ball milling for 2 h. The final material was obtained after annealing at 500 °C for 3.5 h. Structural and morphological characterization of the synthesized material has been achieved employing X-ray diffraction (XRD), Fourier transform infra-red (FTIR) spectroscopy, Brunauer–Emmett–Teller (BET) N2 adsorption–desorption analysis, Scanning electron microscopy-coupled Energy dispersive X-ray spectroscopy (SEM-EDS), Transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and UV-Vis diffuse reflectance spectroscopy (UV-vis DRS) for optical characterization. The 0.05 wt.% CuWO4-TiO2 catalyst was investigated for its photocatalytic activity over carbamazepine (CBZ), achieving a degradation of almost 100% after 2 h irradiation. A comparison with pure TiO2 prepared under those same conditions was made. The effect of pH, chemical scavengers, H2O2 as well as contaminant ion effects (anions, cations), and humic acid (HA) was investigated, and their related influences on the photocatalyst efficiency towards CBZ degradation highlighted accordingly.

Download Full-text

Study of the Effect of TiO2 Layer on the Adsorption and Photocatalytic Activity of TiO2-MoS2 Heterostructures under Visible-Infrared Light

International Journal of Photoenergy ◽

10.1155/2020/8740825 ◽

2020 ◽

Vol 2020 ◽

pp. 1-9 ◽

Cited By ~ 2

Author(s):

N. Cruz-González ◽

O. Calzadilla ◽

J. Roque ◽

F. Chalé-Lara ◽

J. K. Olarte ◽

...

Keyword(s):

Electron Microscopy ◽

Photocatalytic Activity ◽

Photoelectron Spectroscopy ◽

Diffuse Reflectance Spectroscopy ◽

Nitrogen Adsorption ◽

High Photocatalytic Activity ◽

Infrared Light ◽

Polluted Water ◽

Light Spectrum ◽

X Ray

In the last decade, the urgent need to environmental protection has promoted the development of new materials with potential applications to remediate air and polluted water. In this work, the effect of the TiO2 thin layer over MoS2 material in photocatalytic activity is reported. We prepared different heterostructures, using a combination of electrospinning, solvothermal, and spin-coating techniques. The properties of the samples were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), X-ray diffraction (XRD), nitrogen adsorption-desorption isotherms, UV-Vis diffuse reflectance spectroscopy (UV-Vis-DRS), and X-ray photoelectron spectroscopy (XPS). The adsorption and photocatalytic activity were evaluated by discoloration of rhodamine B solution. The TiO2-MoS2/TiO2 heterostructure presented three optical absorption edges at 1.3 eV, 2.28 eV, and 3.23 eV. The high adsorption capacity of MoS2 was eliminated with the addition of TiO2 thin film. The samples show high photocatalytic activity in the visible-IR light spectrum.

Download Full-text

Preparation of Novel Ag–Si–TiO2 Composite and Research on Its Photocatalytic Degradation of Formaldehyde

Science of Advanced Materials ◽

10.1166/sam.2021.3864 ◽

2021 ◽

Vol 13 (3) ◽

pp. 371-380

Author(s):

Yongjun Wu ◽

Nina Xie ◽

Lu Yu

Keyword(s):

Photoelectron Spectroscopy ◽

Removal Rate ◽

Sol Gel ◽

Catalytic Performance ◽

Formaldehyde Concentration ◽

Order Kinetic ◽

Solution Ph ◽

Visible Absorption ◽

X Ray ◽

Co Doped

A novel Ag–Si–TiO2 composite was prepared via sol–gel method for removing residual formaldehyde in shiitake mushroom. The structure of Ag–Si–TiO2 composite was characterized by scanning electron microscope (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses. Ultraviolet-visible absorption spectroscopy (UV-Vis) and N2 adsorption-desorption tests showed that Ag and Si co-doped decreased the band gap, the Brunauer-Emmett-Teller (BET) specific surface area of the samples increased and the recombination probability of electron-hole pairs (e--h+) reduced. Effect on removal rate of formaldehyde with different Ag-Si co-doped content, formaldehyde concentration and solution pH were investigated, and the results showed that 6.0 wt%Ag-3.0 wt%Si-TiO2 samples had an optimum catalytic performance, and the degradation efficiency reached 96.6% after 40 W 365 nm UV lamp irradiation for 360 min. The kinetics of formaldehyde degradation by Ag–Si–TiO2 composite photocatalyst could be described by Langmuir-Hinshelwood first-order kinetic model.

Download Full-text

Synthesis of Hollow Flower-Like Fe3O4/MnO2/Mn3O4 Magnetically Separable Microspheres with Valence Heterostructure for Dye Degradation

Catalysts ◽

10.3390/catal9070589 ◽

2019 ◽

Vol 9 (7) ◽

pp. 589 ◽

Cited By ~ 4

Author(s):

Mingliang Ma ◽

Yuying Yang ◽

Yan Chen ◽

Fei Wu ◽

Wenting Li ◽

...

Keyword(s):

Electron Microscopy ◽

Visible Light ◽

Photoelectron Spectroscopy ◽

Organic Contaminants ◽

Dye Degradation ◽

Catalytic Performance ◽

X Ray ◽

Composite Microspheres ◽

Magnetically Separable ◽

Mno2 Nanosheet

In this manuscript, hollow flower-like ferric oxide/manganese dioxide/trimanganese tetraoxide (Fe3O4/MnO2/Mn3O4) magnetically separable microspheres were prepared by combining a simple hydrothermal method and reduction method. As the MnO2 nanoflower working as precursor was partially reduced, Mn3O4 nanoparticles were in situ grown from the MnO2 nanosheet. The composite microspheres were characterized in detail by employing scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET), vibration sample magnetometer (VSM) and UV–visible spectrophotometer (UV–vis). Under visible light conditions, the test for degrading rhodamine B (RhB) was used to verify the photocatalytic activity of the photocatalyst. The results showed that the efficiency of the Fe3O4/MnO2/Mn3O4 photocatalyst in visible light for 130 min is 94.5%. The catalytic activity of photocatalyst far exceeded that of the Fe3O4/MnO2 component, and after four cycles, the catalytic performance of the catalyst remained at 78.4%. The superior properties of the photocatalyst came from improved surface area, enhanced light absorption, and efficient charge separation of the MnO2/Mn3O4 heterostructure. This study constructed a green and efficient valence heterostructure composite that created a promising photocatalyst for degrading organic contaminants in aqueous environments.

Download Full-text

FeNiCeOx ternary catalyst prepared by ultrasonic impregnation method for diclofenac removal in Fenton-like system

Water Science & Technology ◽

10.2166/wst.2019.166 ◽

2019 ◽

Vol 79 (9) ◽

pp. 1675-1684 ◽

Cited By ~ 1

Author(s):

Guang Xian ◽

Nan Zhang ◽

Guangming Zhang ◽

Yi Zhang ◽

Zhiguo Zou

Keyword(s):

Electron Microscopy ◽

Photoelectron Spectroscopy ◽

Hot Spot ◽

Catalytic Performance ◽

Synthesis Process ◽

Impregnation Method ◽

Lattice Contraction ◽

X Ray ◽

Ultrasonic Synthesis ◽

Cavitation Effect

Abstract FeNiCeOx was firstly prepared by ultrasonic impregnation method and used to remove diclofenac in a Fenton-like system. The catalytic activity was improved successfully by doping Ni into FeCeOx. The diclofenac removal efficiency reached 97.9% after 30 min reaction. The surface morphology and properties of FeNiCeOx were characterized by Brunauer-Emmett-Teller (BET), scanning electron microscopy (SEM), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), Raman and X-ray photoelectron spectroscopy (XPS) analyses. FeNiCeOx in this paper had larger specific surface area than those prepared by other methods, which was attributed to the cavitation effect and hot-spot effect during the ultrasonic synthesis process. Low crystallinity of Fe2O3 and NiO showed by characterization could lead to high interaction of Fe and Ni ions with support of CeO2. They substituted Ce in CeO2, caused lattice contraction and formed more oxygen vacancies, which favoured the catalytic reaction. Meanwhile, Fe and Ce ions both had redox cycles of Fe3+/Fe2+ and Ce4+/Ce3+, which facilitated the electron transfer in the reaction. The synergistic effect among Fe, Ni and Ce might lead to better catalytic performance of FeNiCeOx than any binary metal oxides constituted from the above three elements. Finally, the potential mechanism of diclofenac removal in FeNiCeOx-H2O2 system is proposed.

Download Full-text

MoSe2-GO/rGO Composite Catalyst for Hydrogen Evolution Reaction

Polymers ◽

10.3390/polym10121309 ◽

2018 ◽

Vol 10 (12) ◽

pp. 1309 ◽

Cited By ~ 15

Author(s):

Wenwu Guo ◽

Quyet Le ◽

Amirhossein Hasani ◽

Tae Lee ◽

Ho Jang ◽

...

Keyword(s):

Electron Microscopy ◽

Graphene Oxide ◽

Hydrogen Evolution ◽

Hydrogen Evolution Reaction ◽

Photoelectron Spectroscopy ◽

Transition Metal Dichalcogenides ◽

Catalytic Performance ◽

Composite Catalyst ◽

X Ray ◽

Molybdenum Selenide

There has been considerable research to engineer composites of transition metal dichalcogenides with other materials to improve their catalytic performance. In this work, we present a modified solution-processed method for the formation of molybdenum selenide (MoSe2) nanosheets and a facile method of structuring composites with graphene oxide (GO) or reduced graphene oxide (rGO) at different ratios to prevent aggregation of the MoSe2 nanosheets and hence improve their electrocatalytic hydrogen evolution reaction performance. The prepared GO, rGO, and MoSe2 nanosheets were characterized by X-ray powder diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, and scanning electron microscopy. The electrocatalytic performance results showed that the pure MoSe2 nanosheets exhibited a somewhat high Tafel slope of 80 mV/dec, whereas the MoSe2-GO and MoSe2-rGO composites showed lower Tafel slopes of 57 and 67 mV/dec at ratios of 6:4 and 4:6, respectively. We attribute the improved catalytic effects to the better contact and faster carrier transfer between the edge of MoSe2 and the electrode due to the addition of GO or rGO.

Download Full-text