scholarly journals Two biological constants for accurate classification and evolution pattern analysis of Subgen.strobus and subgen. Pinus

2018 ◽  
Author(s):  
Huabin zou
Keyword(s):  
Morphological Characters ◽  
White Pine ◽  
Maximum Information ◽  
Evolution Pattern ◽  
Scientific Principles ◽  
Theory Equation ◽  
Characteristic Sequences ◽  
Composition Ratios ◽  
Relationship Of

AbstractCurrently, biological classification and determination of different categories are all based on empirical knowledge,which is obtained relying on morphological and molecular characters. For these methods they lacks of absolutely quantitative criteria ground on intrinsically scientific principles. In fact, accurate science classification must depend on the correct description of biology evolution rules.In this article a new theoretical approach was proposed, in which two characteristic constants were gained from biological common heredity and variation information theory equation, when it is at the maximum information states, corresponding to symmetric and asymmetric variation states. They are common composition ratios, Pg =0.61, and Pg=0.70. By analyzing the common composition ratios of compounds among oleoresins, two pine subgenus:Subgen.Strobus (Sweet) Held and Subgen. Pinus could be integrated into one class, Genus pinus, excellently, when Pg = 0.61.These two pine subgenus could be classified into two groups clearly,when Pg = 0.70.The results is somewhat different from that achieved by means of classical classification relying on morphological characters. On the other hand, the evolution relationship of two subgenus was analyzed based on characteristic sequences of samples, it indicated that white pine origin from pinus tabuliformis. The two constants should be used as the classification constants of some biological categories of plants.

STEM and ELS Observation of Early Oxide Formation on the Surface of Cr Thin Films

1980 ◽  
Vol 38 ◽  
pp. 412-413
Author(s):  
Fumio Watari ◽  
J. M. Cowley
Keyword(s):  
Thin Films ◽  
Optical System ◽  
Room Temperature ◽  
Oxide Formation ◽  
Initial Nucleation ◽  
Diffraction Patterns ◽  
Relationship Of ◽  
Multiple Twinning ◽  
Moderately High Temperature

STEM coupled with the optical system was used for the investigation of the early oxidation on the surface of Cr. Cr thin films (30 – 1000Å) were prepared by evaporation onto the polished or air-cleaved NaCl substrates at room temperature and 45°C in a vacuum of 10−6 Torr with an evaporation speed 0.3Å/sec. Rather thick specimens (200 – 1000Å) with various preferred orientations were used for the investigation of the oxidation at moderately high temperature (600 − 1100°C). Selected area diffraction patterns in these specimens are usually very much complicated by the existence of the different kinds of oxides and their multiple twinning. The determination of the epitaxial orientation relationship of the oxides formed on the Cr surface was made possible by intensive use of the optical system and microdiffraction techniques. Prior to the formation of the known rhombohedral Cr2O3, a thin spinel oxide, probably analogous to γ -Al203 or γ -Fe203, was formed. Fig. 1a shows the distinct epitaxial growth of the spinel (001) as well as the rhombohedral (125) on the well-oriented Cr(001) surface. In the case of the Cr specimen with the (001) preferred orientation (Fig. 1b), the rings explainable by spinel structure appeared as well as the well defined epitaxial spots of the spinel (001). The microdif fraction from 20A areas (Fig. 2a) clearly shows the same pattern as Fig. Ia with the weaker oxide spots among the more intense Cr spots, indicating that the thickness of the oxide is much less than that of Cr. The rhombohedral Cr2O3 was nucleated preferably at the Cr(011) sites provided by the polycrystalline nature of the present specimens with the relation Cr2O3 (001)//Cr(011), and by further oxidation it grew into full coverage of the rest of the Cr surface with the orientation determined by the initial nucleation.

Calculating the aerodynamics of vertical axis wind turbines

2012 ◽  
Vol 34 (3) ◽  
pp. 169-184 ◽  
Author(s):  
Hoang Thi Bich Ngoc
Keyword(s):  
Wind Turbine ◽  
Incidence Angle ◽  
Vertical Axis ◽  
Rotor Blades ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbine ◽  
Velocity Triangle ◽  
Relationship Of ◽  
The Relationship

Vertical axis wind turbine technology has been applied last years, very long after horizontal axis wind turbine technology. Aerodynamic problems of vertical axis wind machines are discussible. An important problem is the determination of the incidence law in the interaction between wind and rotor blades. The focus of the work is to establish equations of the incidence depending on the blade azimuth, and to solve them. From these results, aerodynamic torques and power can be calculated. The incidence angle is a parameter of velocity triangle, and both the factors depend not only on the blade azimuth but also on the ratio of rotational speed and horizontal speed. The built computational program allows theoretically selecting the relationship of geometric parameters of wind turbine in accordance with requirements on power, wind speed and installation conditions.

Tire Treadwear — A Comprehensive Evaluation of the Factors: Generic Type, Aspect Ratio, Tread Pattern, and Tread Composition Part I: Introduction and Details on the Organization of the Program

1986 ◽  
Vol 14 (4) ◽  
pp. 201-218 ◽  
Author(s):  
A. G. Veith
Keyword(s):  
Aspect Ratio ◽  
Comprehensive Evaluation ◽  
Test Method ◽  
Interactive Effects ◽  
Data Analyses ◽  
Main Effect ◽  
Systematic Determination ◽  
Relationship Of ◽  
The Relationship

Abstract This four-part series of papers addresses the problem of systematic determination of the influence of several tire factors on tire treadwear. Both the main effect of each factor and some of their interactive effects are included. The program was also structured to evaluate the influence of some external-to-tire conditions on the relationship of tire factors to treadwear. Part I describes the experimental design used to evaluate the effects on treadwear of generic tire type, aspect ratio, tread pattern (groove or void level), type of pattern (straight rib or block), and tread compound. Construction procedures and precautions used to obtain a valid and functional test method are included. Two guiding principles to be used in the data analyses of Parts II and III are discussed. These are the fractional groove and void concept, to characterize tread pattern geometry, and a demonstration of the equivalence of wear rate for identical compounds on whole tread or multi-section tread tires.

PIOPLE. INFORMATION. DEGRADATION

2019 ◽  
pp. 44-53
Author(s):  
Andrey Varlamov ◽  
Vladimir Rimshin
Keyword(s):  
Information Theory ◽  
Mathematical Theory ◽  
Maximum Information ◽  
Building Models ◽  
Man And Nature ◽  
History Of ◽  
Nature And Society ◽  
Relationship Of ◽  
Link Information ◽  
The Relationship

Considered the issues of interaction between man and nature. Noted that this interaction is fundamental in the existence of modern civilization. The question of possible impact on nature and society with the aim of preserving the existence of human civilization. It is shown that the study of this issue goes towards the crea-tion of models of interaction between nature and man. Determining when building models is information about the interaction of man and nature. Considered information theory from the viewpoint of interaction between nature and man. Noted that currently information theory developed mainly as a mathematical theory. The issues of interaction of man and nature, the availability and existence of information in the material sys-tem is not studied. Indicates the link information with the energy terms control large flows of energy. For con-sideration of the interaction of man and nature proposed to use the theory of degradation. Graphs are pre-sented of the information in the history of human development. Reviewed charts of population growth. As a prediction it is proposed to use the simplest based on the theory of degradation. Consideration of the behav-ior of these dependencies led to the conclusion about the existence of communication energy and information as a feature of the degradation of energy. It justifies the existence of border life ( including humanity) at the point with maximum information. Shows the relationship of energy and time using potential energy.

scholarly journals Multimessenger Probes for New Physics in Light of A. Sakharov’s Legacy in Cosmoparticle Physics

Universe ◽  
2021 ◽  
Vol 7 (7) ◽  
pp. 222
Author(s):  
Maxim Khlopov
Keyword(s):  
Standard Model ◽  
Particle Physics ◽  
New Physics ◽  
Physical Models ◽  
Beyond The Standard Model ◽  
Fundamental Relationship ◽  
Relationship Of ◽  
The Universe ◽  
Selection Of

A.D. Sakharov’s legacy in now standard model of the Universe is not reduced to baryosynthesis but extends to the foundation of cosmoparticle physics, which studies the fundamental relationship of cosmology and particle physics. Development of cosmoparticle physics involves cross-disciplinary physical, astrophysical and cosmological studies of physics Beyond the Standard model (BSM) of elementary particles. To probe physical models for inflation, baryosynthesis and dark matter cosmoparticle physics pays special attention to model dependent messengers of the corresponding models, making their tests possible. Positive evidence for such exotic phenomena as nuclear interacting dark atoms, primordial black holes or antimatter globular cluster in our galaxy would provide the selection of viable BSM models determination of their parameters.

scholarly journals Relationship Between Root and Yield Related Morphological Characters in Pea (Pisum Sativum L.)

2014 ◽  
Vol 66 (1) ◽  
pp. 3-15
Author(s):  
Sylwia Ciaglo-Androsiuk
Keyword(s):  
Root System ◽  
Morphological Traits ◽  
Lateral Roots ◽  
Morphological Characters ◽  
Yield Potential ◽  
Cultivated Plants ◽  
Genetic Determination ◽  
Canonical Correlations ◽  
Effect On Yield

AbstractRelation between morphological traits of the root system and yield related traits is an important issue concerning efforts aiming at improving of ideotype of cultivated plants species, including pea. In this paper, to analyse the dependency between traits describing the root system morphology and yield potential, Person’s andSpearman's_correlations as well as canonical correlations were used.Root system was analyzed in 14 and 21 day-old seedlings growing in blotting-paper cylinders. Yield potential of pea was analysed in a field experiment. Results of Person’s and Spearman's_correlations revealed that number of lateral roots and lateral roots density were correlated witch yield related traits. Correlation between root length and shoot length was observed only for 14 day-old seedlings. The result of canonical correlations revealed that number of lateral roots and lateral roots density had the largest effect on yield related traits. This work highlights, that in order to improve the yield of pea it might become necessary to understand genetic determination of morphological traits of the root system, especially number of lateral roots.

Knowledge management implementation in Indian automobile ancillary industries

2016 ◽  
Vol 11 (3) ◽  
pp. 802-810 ◽  
Author(s):  
Nitin Yashwant Patil ◽  
Ravi M. Warkhedkar
Keyword(s):  
Knowledge Management ◽  
Industrial Area ◽  
Total Quality ◽  
Limited Data ◽  
Interpretive Structural Modeling ◽  
Content Type ◽  
Relationship Of ◽  
Power And Dependence ◽  
The Relationship

Purpose In the past decade, much has been written about knowledge management (KM) in the manufacturing; however, less attention has been paid to the Indian automobile ancillary industries located in Chinchwad, Pune. It is suitable to find out the relationship of the factors of the study. It helps in identifying the hierarchy of factors to be taken, and interlinking of production department with KM improves the productivity of the industries. Categorization of these principles based on their driving power (principles which hold other principles) and dependence (principles which are dependent on other principles) has also been examined for KM implementation to study the driving power and dependence power of these principles. This paper aims to determine the roadmap of KM implementation and categorize KM principles based on their driving power for manufacturing industries with the use of the interpretive structural modeling (ISM)-based model. The results indicate that the principles possessing higher driving power, such as KM, inventory control, quality control, productivity and scheduling and their interlinking. The major contribution of this research lies in the development of contextual relationship among various identified factors of KM and determination of their driving and dependence power through a single systemic framework. Design/methodology/approach In this paper, author find out the suitability ISM for Indian Automobile industries to find the relation among the variables. Findings ISM model has been developed for the hierarchy of the identified KM. As ISM model results a hypothetical hierarchy which needs a proper quantitative analysis to evaluate their percentage effectiveness in the hierarchy. Research limitations/implications It is applied to automobile industries with limited number of variables that will show the dependence variable and driving variables and their interrelations. It can be applied other fields to fine the relationship of variables. Practical implications The ISM may be used in supply chain management and total quality management to find interlinking between the variables. Originality/value The limited data collected from Pimpri Chinchwad industrial area of Pune from Maharashtra state (India).

scholarly journals Comparison of Three Solid Phase Materials for the Extraction of Carboxylic Acids from River Water Followed by 2D GC × GC-TOFMS Determination

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
G. O. Bosire ◽  
J. C. Ngila ◽  
H. Parshotam
Keyword(s):  
Carboxylic Acid ◽  
Carboxylic Acids ◽  
Natural Organic Matter ◽  
Solid Phase ◽  
Cooling Water ◽  
Raw Water ◽  
Aliphatic Carboxylic Acid ◽  
Hydrophobic Nature ◽  
Relationship Of

The extraction and determination of aliphatic and aromatic carboxylic acids as well as their influence on the aromaticity and molecularity relationship of natural organic matter (NOM) in water are reported in this study. Three solid phase extraction (SPE) sorbents were used and their extraction efficiencies evaluated after chromatographic determinations (using gas chromatography with a time of flight mass spectrometer (GC × GC-TOFMS) and liquid chromatography with organic carbon detector (LC-OCD)). More than 42 carboxylic acids were identified in raw water from the Vaal River, which feeds the Lethabo Power Generation Station, South Africa, with cooling water. The aromatic carboxylic acid efficiency (28%) was achieved by using Strata™X SPE while the highest aliphatic carboxylic acid efficiency (92.08%) was achieved by silica SPE. The hydrophobic nature of NOM in water depends on the nature of organic compounds in water, whether aromatic or aliphatic. The LC-OCD was used to assess the hydrophobicity levels of NOM as a function of these carboxylic acids in cooling water. The LC-OCD results showed that the aromatic nature of NOM in SPE filtered water followed the order Silica>Strata X>C-18. From the results, the hydrophobicity degree of the samples depended on the type and number of carboxylic acids that were removed by the SPE cartridges.

Sign in / Sign up

Export Citation Format

Share Document