Hybrid reciprocal lattice: application to layer stress determination in GaAlN/GaN(0001) systems with patterned substrates

2016 ◽  
Vol 49 (3) ◽  
pp. 798-805 ◽  
Author(s):  
Jarosław Z. Domagała ◽  
Sérgio L. Morelhão ◽  
Marcin Sarzyński ◽  
Marcin Maździarz ◽  
Paweł Dłużewski ◽  
...  
Keyword(s):  
High Resolution ◽  
High Efficiency ◽  
Reciprocal Lattice ◽  
High Accuracy ◽  
Stress Determination ◽  
Patterned Substrates ◽  
Strain Gradients ◽  
Tremendous Importance ◽  
Reflection Geometry ◽  
Symmetric Reflection

Epitaxy of semiconductors is a process of tremendous importance in applied science and in the optoelectronics industry. The control of defects introduced during epitaxial growth is a key point in manufacturing devices of high efficiency and durability. In this work, it is demonstrated how useful hybrid reflections are for the study of epitaxial structures with anisotropic strain gradients due to patterned substrates. High accuracy in detecting and distinguishing elastic and plastic relaxations is one of the greatest advantages of measuring this type of reflection, as well as the fact that the method can be exploited in a symmetric reflection geometry on a commercial high-resolution diffractometer.

A 3D Optimized Frequency–Wavenumber (FK), Time–Space Optimized Symplectic (TSOS) Hybrid Method for Teleseismic Wave Modeling

2021 ◽  
Author(s):  
Weijuan Meng ◽  
Dinghui Yang ◽  
Xingpeng Dong ◽  
Jian Ma
Keyword(s):  
High Resolution ◽  
Seismic Wave ◽  
Hybrid Method ◽  
High Efficiency ◽  
Reference Model ◽  
3D Models ◽  
Realistic Model ◽  
High Accuracy ◽  
Memory Requirement ◽  
Time Space

ABSTRACT Although teleseismic waveform tomography can provide high-resolution images of the deep mantle, it is still unrealistic to numerically simulate the whole domain of seismic wave propagation due to the huge amount of computation. In this article, we develop a new three-dimensional hybrid method to address this issue, which couples the modified frequency–wavenumber (FK) method with the 3D time–space optimized symplectic (TSOS) method. First, the FK method, which is used to calculate the semianalytical incident wavefields in the layered reference model, is modified to compute the wavefields efficiently with a significantly low-memory requirement. Second, 3D TSOS method is developed to model the seismic wave propagating in the local 3D heterogeneous domain. The low memory requirement of the modified FK method and the high accuracy of the TSOS method make it feasible to obtain highly accurate synthetic seismograms efficiently. A crust–upper mantle model for P-, SV-, and SH-wave incidences is calculated to benchmark the accuracy and efficiency of the 3D optimized FK-TSOS method. Numerical experiments for 3D models with heterogeneities, undulated discontinuous interfaces, and realistic model in eastern Tibet, illustrate the capability of hybrid method to accurately capture the scattered waves caused by heterogeneities in 3D medium. The 3D optimized FK-TSOS method developed shows low-memory requirement, high accuracy, and high efficiency, which makes it be a promising forward method to further apply to high-resolution mantle structure images beneath seismic array.

scholarly journals High-Precision Spotlight SAR Imaging with Joint Modified Fast Factorized Backprojection and Autofocus

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Man Zhang ◽  
Haolin Li ◽  
Guanyong Wang
Keyword(s):  
Fourier Transform ◽  
High Resolution ◽  
Time Domain ◽  
High Efficiency ◽  
High Accuracy ◽  
Synthetic Aperture ◽  
Image Domain ◽  
Phase Gradient ◽  
Phase Errors ◽  
Sar Imaging

Fast factorized backprojection (FFBP) takes advantage of high accuracy of time-domain algorithms while also possessing high efficiency comparable with conventional frequency domain algorithms. When phase errors need to be compensated for high-resolution synthetic aperture radar (SAR) imaging, however, neither polar formatted subimages within FFBP flow nor the final Cartesian image formed by FFBP is suitable for phase gradient autofocus (PGA). This is because these kinds of images are not capable of providing PGA with a clear Fourier transform relationship (FTR) between image domain and range-compressed phase history domain. In this paper, we make some essential modifications to the original FFBP and present a scheme to incorporate overlapped-subaperture frame for an accurate PGA processing. The raw data collected by an airborne high-resolution spotlight SAR are used to demonstrate the performance of this algorithm.

Microcalorimeters for X-Ray Spectroscopy

1988 ◽  
Vol 102 ◽  
pp. 41
Author(s):  
E. Silver ◽  
C. Hailey ◽  
S. Labov ◽  
N. Madden ◽  
D. Landis ◽  
...  
Keyword(s):  
High Resolution ◽  
High Efficiency ◽  
Thermal Response ◽  
Low Noise ◽  
High Resolution Spectroscopy ◽  
Superconducting Transition ◽  
Sapphire Substrates ◽  
Laboratory Plasmas ◽  
Adiabatic Demagnetization ◽  
Theoretical Predictions

The merits of microcalorimetry below 1°K for high resolution spectroscopy has become widely recognized on theoretical grounds. By combining the high efficiency, broadband spectral sensitivity of traditional photoelectric detectors with the high resolution capabilities characteristic of dispersive spectrometers, the microcalorimeter could potentially revolutionize spectroscopic measurements of astrophysical and laboratory plasmas. In actuality, however, the performance of prototype instruments has fallen short of theoretical predictions and practical detectors are still unavailable for use as laboratory and space-based instruments. These issues are currently being addressed by the new collaborative initiative between LLNL, LBL, U.C.I., U.C.B., and U.C.D.. Microcalorimeters of various types are being developed and tested at temperatures of 1.4, 0.3, and 0.1°K. These include monolithic devices made from NTD Germanium and composite configurations using sapphire substrates with temperature sensors fabricated from NTD Germanium, evaporative films of Germanium-Gold alloy, or material with superconducting transition edges. A new approache to low noise pulse counting electronics has been developed that allows the ultimate speed of the device to be determined solely by the detector thermal response and geometry. Our laboratory studies of the thermal and resistive properties of these and other candidate materials should enable us to characterize the pulse shape and subsequently predict the ultimate performance. We are building a compact adiabatic demagnetization refrigerator for conveniently reaching 0.1°K in the laboratory and for use in future satellite-borne missions. A description of this instrument together with results from our most recent experiments will be presented.

The use of high-resolution FESEM to study solid-state phase transformations and reactions

1994 ◽  
Vol 52 ◽  
pp. 1028-1029
Author(s):  
P. G. Kotula ◽  
D. D. Erickson ◽  
C. B. Carter
Keyword(s):  
Solid State ◽  
High Resolution ◽  
Phase Transformations ◽  
High Efficiency ◽  
Sol Gel ◽  
Quantitative Information ◽  
Solid State Reactions ◽  
Critical Dimensions ◽  
Backscattered Electrons ◽  
Backscattered Electron

High-resolution field-emission-gun scanning electron microscopy (FESEM) has recently emerged as an extremely powerful method for characterizing the micro- or nanostructure of materials. The development of high efficiency backscattered-electron detectors has increased the resolution attainable with backscattered-electrons to almost that attainable with secondary-electrons. This increased resolution allows backscattered-electron imaging to be utilized to study materials once possible only by TEM. In addition to providing quantitative information, such as critical dimensions, SEM is more statistically representative. That is, the amount of material that can be sampled with SEM for a given measurement is many orders of magnitude greater than that with TEM.In the present work, a Hitachi S-900 FESEM (operating at 5kV) equipped with a high-resolution backscattered electron detector, has been used to study the α-Fe2O3 enhanced or seeded solid-state phase transformations of sol-gel alumina and solid-state reactions in the NiO/α-Al2O3 system. In both cases, a thin-film cross-section approach has been developed to facilitate the investigation. Specifically, the FESEM allows transformed- or reaction-layer thicknesses along interfaces that are millimeters in length to be measured with a resolution of better than 10nm.

scholarly journals On-chip trans-dimensional plasmonic router

Nanophotonics ◽  
2020 ◽  
Vol 9 (10) ◽  
pp. 3357-3365 ◽  
Author(s):  
Shaohua Dong ◽  
Qing Zhang ◽  
Guangtao Cao ◽  
Jincheng Ni ◽  
Ting Shi ◽  
...  
Keyword(s):  
High Speed ◽  
High Efficiency ◽  
Incident Angle ◽  
Reciprocal Lattice ◽  
Plasmonic Waveguide ◽  
Optical Diffraction ◽  
Local Dynamic ◽  
Phase Gradient ◽  
On Chip ◽  
Plasmon Polaritons

AbstractPlasmons, as emerging optical diffraction-unlimited information carriers, promise the high-capacity, high-speed, and integrated photonic chips. The on-chip precise manipulations of plasmon in an arbitrary platform, whether two-dimensional (2D) or one-dimensional (1D), appears demanding but non-trivial. Here, we proposed a meta-wall, consisting of specifically designed meta-atoms, that allows the high-efficiency transformation of propagating plasmon polaritons from 2D platforms to 1D plasmonic waveguides, forming the trans-dimensional plasmonic routers. The mechanism to compensate the momentum transformation in the router can be traced via a local dynamic phase gradient of the meta-atom and reciprocal lattice vector. To demonstrate such a scheme, a directional router based on phase-gradient meta-wall is designed to couple 2D SPP to a 1D plasmonic waveguide, while a unidirectional router based on grating metawall is designed to route 2D SPP to the arbitrarily desired direction along the 1D plasmonic waveguide by changing the incident angle of 2D SPP. The on-chip routers of trans-dimensional SPP demonstrated here provide a flexible tool to manipulate propagation of surface plasmon polaritons (SPPs) and may pave the way for designing integrated plasmonic network and devices.

scholarly journals High-Accuracy Surface Topography Manufacturing for Continuous Phase Plates Using an Atmospheric Pressure Plasma Jet

Micromachines ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 683
Author(s):  
Huiliang Jin ◽  
Caixue Tang ◽  
Haibo Li ◽  
Yuanhang Zhang ◽  
Yaguo Li
Keyword(s):  
Surface Topography ◽  
Atmospheric Pressure ◽  
High Efficiency ◽  
Atmospheric Pressure Plasma ◽  
Plasma Jet ◽  
Continuous Phase ◽  
High Accuracy ◽  
Phase Plate ◽  
Atmospheric Pressure Plasma Jet ◽  
Pressure Plasma

The continuous phase plate (CPP) is the vital diffractive optical element involved in laser beam shaping and smoothing in high-power laser systems. The high gradients, small spatial periods, and complex features make it difficult to achieve high accuracy when manufacturing such systems. A high-accuracy and high-efficiency surface topography manufacturing method for CPP is presented in this paper. The atmospheric pressure plasma jet (APPJ) system is presented and the removal characteristics are studied to obtain the optimal processing parameters. An optimized iterative algorithm based on the dwell point matrix and a fast Fourier transform (FFT) is proposed to improve the accuracy and efficiency in the dwell time calculation process. A 120 mm × 120 mm CPP surface topography with a 1326.2 nm peak-to-valley (PV) value is fabricated with four iteration steps after approximately 1.6 h of plasma processing. The residual figure error between the prescribed surface topography and plasma-processed surface topography is 28.08 nm root mean square (RMS). The far-field distribution characteristic of the plasma-fabricated surface is analyzed, for which the energy radius deviation is 11 μm at 90% encircled energy. The experimental results demonstrates the potential of the APPJ approach for the manufacturing of complex surface topographies.

scholarly journals Efficient and large-area all vacuum-deposited perovskite light-emitting diodes via spatial confinement

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Peipei Du ◽  
Jinghui Li ◽  
Liang Wang ◽  
Liang Sun ◽  
Xi Wang ◽  
...  
Keyword(s):  
High Resolution ◽  
Large Scale ◽  
High Efficiency ◽  
Light Emitting Diodes ◽  
Scale Production ◽  
Nonradiative Recombination ◽  
Large Area ◽  
Spatial Confinement ◽  
Light Emitting ◽  
Large Scale Production

AbstractWith rapid advances of perovskite light-emitting diodes (PeLEDs), the large-scale fabrication of patterned PeLEDs towards display panels is of increasing importance. However, most state-of-the-art PeLEDs are fabricated by solution-processed techniques, which are difficult to simultaneously achieve high-resolution pixels and large-scale production. To this end, we construct efficient CsPbBr3 PeLEDs employing a vacuum deposition technique, which has been demonstrated as the most successful route for commercial organic LED displays. By carefully controlling the strength of the spatial confinement in CsPbBr3 film, its radiative recombination is greatly enhanced while the nonradiative recombination is suppressed. As a result, the external quantum efficiency (EQE) of thermally evaporated PeLED reaches 8.0%, a record for vacuum processed PeLEDs. Benefitting from the excellent uniformity and scalability of the thermal evaporation, we demonstrate PeLED with a functional area up to 40.2 cm2 and a peak EQE of 7.1%, representing one of the most efficient large-area PeLEDs. We further achieve high-resolution patterned perovskite film with 100 μm pixels using fine metal masks, laying the foundation for potential display applications. We believe the strategy of confinement strength regulation in thermally evaporated perovskites provides an effective way to process high-efficiency and large-area PeLEDs towards commercial display panels.

Contour Extraction of Cerebrovascular Based on Maximum Optimization Cost

2011 ◽  
Vol 204-210 ◽  
pp. 1415-1418
Author(s):  
De Jiang Zhang ◽  
Na Na Dong ◽  
Xiao Mei Lin
Keyword(s):  
Dynamic Programming ◽  
Blood Vessel ◽  
High Efficiency ◽  
High Accuracy ◽  
Differential Method ◽  
Cost Curve ◽  
Contour Extraction ◽  
Target Image ◽  
The Cost ◽  
Conventional Algorithm

By studying the conventional algorithm of contour extraction, a new method of contour extraction in blood vessel of brain is proposed based on the MOC maximum optimization cost. First of all, the theory computes the gray differential of the image by conventional differential method to build the cost space. Then, by using dynamic programming theory, the maximum optimization cost curve in the space is extracted to serve as the specific cerebrovascular profile. The experiments show that this method ensures high efficiency in extracting cerebrovascular contour and a high accuracy in positioning cerebrovascular contour, and it diminishes the target image ambiguity caused by noise to improve the anti-interference ability of Contour extraction.

Sign in / Sign up

Export Citation Format

Share Document