Business incubator training management model to increase graduate competency

2019 ◽  
Vol 26 (3) ◽  
pp. 773-787 ◽  
Author(s):  
I Made Sudana ◽  
Delta Apriyani ◽  
Eko Supraptono ◽  
Arasinah Kamis
Keyword(s):  
Training Model ◽  
Test Model ◽  
Test Results ◽  
Business Incubator ◽  
Study Program ◽  
Final Model ◽  
Content Type ◽  
Second Development ◽  
Beauty Salon ◽  
Model Determination

Purpose The purpose of this paper is to produce a business incubator training model for students to form graduates in order to have competence in the field of entrepreneurship in an effort to reduce high unemployment. Design/methodology/approach The method used in this study was research and development (R&D) that consisted of the following five stages: first, planning based on the result of initial observation in the field, second, development of training model, third, validity test model, fourth, limited test and fifth, final model determination. This research used and involved 12 beauty successful beauty salon entrepreneurs as validator models of business incubator training management. Findings The test results show that the training model developed is effective in forming entrepreneurship competence of graduates, so it is feasible to be applied in Beauty Education Study Program, Engineering Faculty of Universitas Negeri Semarang. Practical implications The resulted model can be used as a learning model that can develop the skill of entrepreneurship level for students. Originality/value This study provides contribution to the unemployment level decrease and employment acceleration.

Assessing the financial condition and accounts receivable risk among US farmer cooperatives

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Gerald Mashange ◽  
Brian C. Briggeman
Keyword(s):  
Stress Test ◽  
Test Model ◽  
Test Results ◽  
Content Type ◽  
Accounts Receivable ◽  
Financial Condition ◽  
Farmer Cooperatives ◽  
Retained Earnings ◽  
Bad Debt ◽  
Over Time

PurposeThe purpose of this paper is to examine the financial condition and ability of farmer cooperatives to withstand significant increases in bad debt expense.Design/methodology/approachA unique data set of farmer cooperative financial statements that spans from 1996 to 2019 is used to examine the changes in profitability, solvency, liquidity and accounts receivable risk. Also, a deterministic stress test model is designed to shock bad debt expense and the resulting write-off of accounts receivable for farmer cooperatives. The stress test provides insights to the resiliency of farmer cooperatives.FindingsResults find that farmer cooperatives are in a strong financial position, which has improved over time. The majority of farmer cooperatives are able to absorb a substantial increase in bad debt expense because of their sizable, retained earnings position. However, cooperatives that have significant profitability challenges do experience much larger losses, especially mixed farmer cooperatives (roughly equally amounts of grain and farm supply sales) and large cooperatives with more than $500 million in sales.Practical implicationsThe stress test results suggest farmer cooperative managers and boards of directors could re-examine their credit policies and consider extending additional credit. Also, cooperatives should consider monitoring and identifying an optimal accounts receivable to retained earnings ratio, which is similar to how banks examine their tier 1 capital ratios.Originality/valueThe value of this study is having data that allows for the examination of the financial condition of farmer cooperatives over time. Also, having current data means the accounts receivable stress test results are more relevant and timelier. This is important because these accounts receivable are primarily tied to crop input supplies, and farmer cooperatives are a significant market participant in the crop input supply market.

Faktor – Faktor Yang Mempengaruhi Minat Berwirausaha Mahasiswa Program Studi Manajemen Fakultas Ekonomi Universitas Flores

Analisis ◽  
2020 ◽  
Vol 19 (1) ◽  
pp. 76-84
Author(s):  
Nasarius Aban ◽  
Gabriel Tanusi
Keyword(s):  
Emotional Intelligence ◽  
Regression Analysis ◽  
Family Environment ◽  
Linear Regression Analysis ◽  
Simple Random Sampling ◽  
Coefficient Of Determination ◽  
Test Results ◽  
Study Program ◽  
Management Study ◽  
The University

This study aims to determine the effect of emotional intelligence, independent attitude and family environment on the interest in entrepreneurship at the University of Flores Management Faculty of Economics. This research is an associative research. The population in this study were students of the Management Study Program of the Faculty of Economics of the University of Flores in the class of 2015-2016 who had passed the entrepreneurship courses of 170 people. Samples taken in this study were 105 respondents, with sampling techniques using simple random sampling. Data collection using questionnaires and interviews, while data analysis was performed using multiple linear regression analysis. The results of multiple regression analysis are Y = 1.060 + 0.594X1 + 0.114X2 + 0.421X3 + e. The coefficient of determination R2 for the variables X1, X2, X3 is 0.675, which means that entrepreneurial interest can be influenced by emotional intelligence, independent attitude and family environment by 67.50% and the remaining 32.50% is influenced by other factors including factors of education, skills, motivation and others. F test results show the value of Fcount> Ftable (28.442> 2.69) with a significant level of 0.000 <0.05 meaning that there is a positive and significant influence between emotional intelligence, independent attitude and family environment together on the entrepreneurial interest of the Faculty of Management Study Program Students The economy. Partial test results (t) show 1) Emotional intelligence factors have a positive and significant effect on entrepreneurial interest 2) Family environment factors have a positive and significant effect on entrepreneurial interest 3) Independent attitude factor has no positive and significant effect on entrepreneurial interest.

New product and emerging business growth in Kwara State

2016 ◽  
Vol 12 (3) ◽  
pp. 207-227 ◽  
Author(s):  
Seun Oladele ◽  
Femi Oladele
Keyword(s):  
Market Share ◽  
Manufacturing Industry ◽  
Service Industry ◽  
New Product ◽  
Sales Volume ◽  
Test Results ◽  
Business Growth ◽  
Content Type ◽  
Product Service ◽  
Service Portfolio

Purpose – The purpose of this paper is to examine the effect of new product on growth of emerging businesses (EBs) through sales volume and market share. Design/methodology/approach – The study surveyed 137 EBs in Kwara State. Two hypotheses were formulated and tested using correlation and regression analyses. Findings – Results show that service industry is dominant among EBs while the manufacturing industry trails. Many EBs are aware of the complexities of new product, its development and contribution to increasing sales volume, market share and ensuring competitive advantage with apparent infrastructural deficiencies. Test results show that there is a significant positive relationship and effect on sales volume and market share. Originality/value – Encouraging EBs to step up and focus on improving product/service portfolio to transform their fortune is explored giving focus to the benefits of increasing sales volume and market share.

Design of Static Test Model for Three-Tower Cable-Stayed Self-Anchored Suspension Composed Bridge

2011 ◽  
Vol 243-249 ◽  
pp. 1528-1535
Author(s):  
Yu Zhao ◽  
Yong Jun Zhou ◽  
Jing Sun ◽  
Jin Tao Tang ◽  
Xu Li
Keyword(s):  
Complex System ◽  
Finite Element ◽  
Element Model ◽  
Test Model ◽  
Test Results ◽  
Static Test ◽  
Whole Process ◽  
Aesthetic Appearance ◽  
Load Carrying ◽  
Novel Structures

Cable-stayed self-anchored suspension composed bridges have novel structures and aesthetic appearance with complex system and difficulty for design and construction. In order to acquire a better knowledge of the load-carrying capability of this type of bridges, based on a real bridge and the theory of abnormal similarity, a full-bridge scaled down(1:20) test model was built to simulate the whole process of construction. The test results were preferably fit the theoretical calculation value. It can be seen that the design of the bridge was reasonable, and the accuracy of the calculation of finite element model was verified at the same time. The test and the related results can be used as the reference for the test and design of the similar bridges.

scholarly journals The drivers of economic growth in China and India: globalization or financial development?

2017 ◽  
Vol 16 (1) ◽  
pp. 54-84 ◽  
Author(s):  
Magda Kandil ◽  
Muhammad Shahbaz ◽  
Mantu Kumar Mahalik ◽  
Duc Khuong Nguyen
Keyword(s):  
Economic Growth ◽  
Financial Development ◽  
Emerging Market ◽  
Annual Data ◽  
Test Results ◽  
Causality Test ◽  
Content Type ◽  
China And India ◽  
Integration Test ◽  
The Impact

Purpose Using annual data from 1970 to 2013 for China and India, this paper aims to examine the impact of globalization and financial development on economic growth by endogenizing capital and inflation and drawing comparisons between the two fastest growing emerging market economies. Design/methodology/approach In the long run, co-integration test results indicate that financial development increases economic growth in China and India. Findings The results also reveal that globalization accelerates economic growth in India but, surprisingly, impairs economic growth in China, as it increases competition for exports. The results furthermore disclose that acceleration in capitalization and inflation, as a proxy for aggregate demand, are positively linked to economic growth in China and India. Originality/value Causality test results indicate that both financial development and economic growth are interdependent. In contrast, causality runs from higher economic growth to increased globalization in India, while the results do not support long-term causality between globalization and economic growth in China.

Study of mechanical properties of indium-based solder alloys for cryogenic applications

2022 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Madhuri Chandrashekhar Deshpande ◽  
Rajesh Chaudhari ◽  
Ramesh Narayanan ◽  
Harishwar Kale
Keyword(s):  
Mechanical Properties ◽  
Solder Alloy ◽  
Charpy Impact ◽  
Charpy Impact Test ◽  
Test Results ◽  
Solder Alloys ◽  
Content Type ◽  
Electron Microscope Analysis ◽  
American Society ◽  
Work Done

Purpose This study aims to develop indium-based solders for cryogenic applications. Design/methodology/approach This paper aims to investigate mechanical properties of indium-based solder formulations at room temperature (RT, 27 °C) as well as at cryogenic temperature (CT, −196 °C) and subsequently to find out their suitability for cryogenic applications. After developing these alloys, mechanical properties such as tensile and impact strength were measured as per American Society for Testing and Materials standards at RT and at CT. Charpy impact test results were used to find out ductile to brittle transition temperature (DBTT). These properties were also evaluated after thermal cycling (TC) to find out effect of thermal stress. Scanning electron microscope analysis was performed to understand fracture mechanism. Results indicate that amongst the solder alloys that have been studied in this work, In-34Bi solder alloy has the best all-round mechanical properties at RT, CT and after TC. Findings It can be concluded from the results of this work that In-34Bi solder alloy has best all-round mechanical properties at RT, CT and after TC and therefore is the most appropriate solder alloy amongst the alloys that have been studied in this work for cryogenic applications Originality/value DBTT of indium-based solder alloys has not been found out in the work done so far in this category. DBTT is necessary to decide safe working temperature range of the alloy. Also the effect of TC, which is one of the major reasons of failure, was not studied so far. These parameters are studied in this work.

Information technology investment and innovation performance: does investment paradox exist?

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Peinan Ji ◽  
Xiangbin Yan ◽  
Yan Shi
Keyword(s):  
Information Technology ◽  
Time Lag ◽  
Innovation Performance ◽  
Test Model ◽  
It Investment ◽  
Firm Innovation ◽  
Data Set ◽  
Content Type ◽  
Lag Effect ◽  
Enterprise Innovation

Purpose The purpose of this study is to deepen the understanding of the effects of information technology (IT) investment on firm innovation performance and examining the investment paradox effect in China. Design/methodology/approach Using a sample of China’ public firms IT investment data between 2010 and 2016, the authors establish a test model of IT investment and innovation performance. Findings The result indicates that IT investment in firms have no effect on innovation performance in the investment period. However, in the full sample and manufacturing sample, the IT investment has a significant positive effect on innovation performance in the post-investment years. In addition, this study finds that large companies and low-age companies may contribute more to innovation when firm investment in IT. Research limitations/implications There are several limitations in this research. First, the authors are failed to obtain a larger sample about the IT investment information data set in China, so this study was compelled to use limited sample data from China, hence, this could lead to errors of too early generalization. Second, the authors use the number of invention patent applications to represent the performance of enterprise innovation, which may not show enterprise innovation effectively. Third, the firms in the sample are all in China Listed Companies, so this may not accurately reflect the entire environment of firm innovation performance, and could possibly. Practical implications The research confirms that there is a paradox and time lag effect in IT investment, which enterprises should pay attention to. Originality/value Existing research confirms that corporate IT investments can bring new products or services. However, the authors still do not know whether IT investment has improved the company’s ability of innovation. This study will fill this gap and the industry effect and time lag effect of the influence of IT investment on innovative performance are also examined.

Local government website usability on mobile devices: test results and recommendations

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Karol Król ◽  
Dariusz Zdonek
Keyword(s):  
Local Government ◽  
Mobile Devices ◽  
Local Governments ◽  
Recent Decade ◽  
Test Results ◽  
Content Type ◽  
Computer Tools ◽  
Website Usability ◽  
Social Importance ◽  
Government Website

Purpose The range of official business that can be handled online has grown in the recent decade. In many cases, e-services are a must. At the same time, the economic impact and social importance of mobile technology have increased. Mobile devices are becoming more and more popular, and their applications diversify. It comes as no surprise that mobile users expect e-services and official information to be available through this channel. The purpose of this paper is to identify problems (difficulties) occurring when browsing websites of local government units (LGU) on mobile devices. Design/methodology/approach The comfort of website browsing depends mostly on the development technique, and the way content is published. Responsive websites are much easier to view on mobile devices than “static” ones. The study involves 400 websites of LGU in Poland. The websites were subjected to quantitative and qualitative analyses with selected techniques and computer tools. Findings The set of 400 websites contained 119 (29.75%) that were not responsive. It exhibited a substantial potential for the optimisation of websites for mobile devices. The study revealed the most common usability failures such as distorted images, “scattered icons”, partial responsiveness and bothersome messages in pop-ups. Originality/value The research identified the most widespread problems with the tested websites. The study yielded recommendations for local governments, which may be useful when managing content, upgrading the website or replacing it with a new one.

Comparing fidelity monitoring methods in an evidence-based parenting intervention

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ashwini Tiwari ◽  
Daniel Whitaker ◽  
Shannon Self-Brown
Keyword(s):  
Program Effectiveness ◽  
Training Model ◽  
Monitoring Methods ◽  
Capture Process ◽  
Content Type ◽  
Program Fidelity ◽  
Home Based ◽  
Audio Recordings ◽  
Fidelity Monitoring ◽  
Video And Audio

Purpose Two common methods in community settings of assessing program fidelity, a critical implementation component for program effectiveness, are video and audio recordings of sessions. This paper aims to examine how these two methods compared when used for a home-based behavioral parenting-training model (SafeCare®). Design/methodology/approach Twenty-five SafeCare video-recorded sessions between home visitors and parents were scored by trained raters either using the video or audio-only portions of recordings. Sessions were coded using fidelity checklists, with items (n = 33) classified as one of two fidelity aspects, content [delivery of program components (n = 15)], or process [communication and rapport building (n = 11)]. Seven items were considered to overlap between constructs. Items were coded as having been done or not done appropriately. Coders rated items as “technological limitation” when scoring methods hindered coding. Analyses compared percent agreement and disagreement between audio and video coders. Findings Overall agreement between coders was 72.12%. Levels of agreement were higher for content items (M = 80.89%, SD = 19.68) than process items (58.54%, SD = 34.41). Disagreements due to technology limitations among audio coders were noted among 15 items; particularly, higher levels of disagreement were seen among process items (42.42%) than content items (9.64%). Originality/value Compared to video, fidelity monitoring via audio recordings was associated with some loss of process-related fidelity. However, audio recordings could be sufficient with supplements such as participant surveys, to better capture process items. Research should also examine how content and process fidelity relate to changes in family behavior to further inform optimal fidelity monitoring methods for program use.

Moving to e-bidding

2019 ◽  
Vol 24 (1) ◽  
pp. 2-18 ◽  
Author(s):  
Djoen San Santoso ◽  
Nuttapon Bourpanus
Keyword(s):  
Wilcoxon Test ◽  
Test Results ◽  
Public Infrastructure ◽  
Senior Managers ◽  
Content Type ◽  
Thai Government ◽  
Infrastructure Project ◽  
The Difference ◽  
Public Money ◽  
Mean Differences

Purpose This study aims to examine the influences of shifting the bidding system of Thai public infrastructure projects from e-auction to e-bidding. Design/methodology/approach A questionnaire survey was conducted with owners or senior managers with direct responsibility in deciding the mark-up of 72 small and medium-sized contractor firms. Five senior professionals were interviewed to provide insights into and to strengthen the discussion of the findings. The Wilcoxon test was applied to analyze the difference in the importance of the factors between e-auction and e-bidding. Findings The results revealed a shift in the importance of the factors, from those related to the financial aspects in the e-auction to the situational aspects in the e-bidding. The comparison test results also suggested that the majority of factors become significantly less important in the e-bidding system, with “identity of competitors” and “general expense of the bidding process” having the most apparent mean differences. The interview results supported by data on winning prices and estimations strongly indicated that bid collusions likely exist in the e-auction. By shifting to e-bidding, the data also show that the Thai Government can save public money in its infrastructure project development. Originality/value The study provides an analysis from the perspectives of contractor firms on how e-auction and e-bidding options influence bid mark-up decisions. Many studies have focused on the issues and advantages provided by the e-procurement mainly from the owner (government)’s perspective but how the change influences the contractor’s attitude has been less explored.

Sign in / Sign up

Export Citation Format

Share Document