Numerical simulation of the area shrinkage mass for the waist of elastic pantyhose by using FEM

2019 ◽  
Vol 32 (2) ◽  
pp. 244-254
Author(s):  
Rui Dan ◽  
Zhen Shi
Keyword(s):  
Finite Element ◽  
Cross Section ◽  
Optimization Design ◽  
Element Model ◽  
Objective Evaluation ◽  
The Body ◽  
Content Type ◽  
Structural Improvement ◽  
Clothing Pressure ◽  
Pressure Sense

Purpose The area shrinkage of the body under pressure is very important to evaluate the comfort of pressure sense, and it is an important index that appraises compression garment. The purpose of this paper is to obtain the area shrinkage mass of the waist cross section by using the finite-element method (FEM), and the waist of women’s pantyhose could be designed with a different degree of elasticity during the course of design based on clothing pressure comfort. Design/methodology/approach This study aimed at the problems existing in the wearing of women’s elastic pantyhose, took the waist of pantyhose as the research object, and the contact between human body and pantyhose as elastic contact. The finite-element model of the waist cross section and elastic pantyhose fabric was acquired through CT scan and Mimics software. After simulating on the corresponding displacement distribution of the waist of sample elastic pantyhose during the process of dressing by using ANSYS, the authors divided the waist cross section into 24 equal regions according to angle (every 15 degrees as a region), and then the area shrinkage mass of each region was obtained by area calculation formula. According to the tendency of area shrinkage distribution, the waist of women’s elastic pantyhose could be designed for different regions of tension considering the pressure comfort, so as to guarantee that the wearing comfort can be maintained on the premise of ensuring the functionality of the elastic pantyhose. Findings In this paper, the authors obtained the area shrinkage mass of elastic pantyhose at waist cross section, and this area shrinkage distribution could be used as an objective evaluation index for pressure comfort. All these solutions are of great significance to the optimization design of pantyhose and can provide theoretical basis for the structural improvement of functional pantyhose and the prediction of clothing pressure. Originality/value This paper simulated the area shrinkage mass for the waist of elastic pantyhose by using FEM, and the waist of women’s elastic pantyhose could be designed for different regions of tension considering the pressure comfort according to the area shrinkage distribution tendency, so as to guarantee the wearing comfort during the wearing process.

Finite element simulation on the relationship between pressure and displacement for the waist of elastic pantyhose

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Rui Dan ◽  
Zhen Shi
Keyword(s):  
Finite Element ◽  
Cross Section ◽  
Research Work ◽  
Lumbar Vertebrae ◽  
Objective Evaluation ◽  
Quadratic Equation ◽  
New Method ◽  
Content Type ◽  
Displacement Distribution ◽  
The Relationship

PurposeObjective appraisal of pressure comfort is the key point of optimal designing of clothing. The purpose of this paper is to study a new method to provide pressure comfort for the waist of elastic pantyhose through the relationship between pressure and displacement using the finite element method (FEM).Design/methodology/approachThis paper presented a simulation model of the waist cross section consisting of three parts, namely skin, soft tissue and lumbar vertebrae, respectively, according to CT scan. The finite element the model of waist cross-section was established using Mimics software. The pressure–displacement quadratic equation can be obtained using ANSYS software and fitting curves. Meanwhile, we divide the waist cross-section into 12 equal regions according to angle, and then the area shrinkage mass of the waist cross-section can be calculated, respectively.FindingsIn this research work, we got the displacement distribution trend of elastic pantyhose at the waist cross section according to the area shrinkage mass of 12 regions, and this displacement could be used as an objective evaluation index for pressure comfort. All these solutions supply a theoretical reference for optimal design of the women's elastic pantyhose.Originality/valueThe paper analyzed the relationship between pressure and displacement for the waist of elastic pantyhose using FEM, and then got the displacement distribution trend of elastic pantyhose at the waist cross section according to the area shrinkage mass of different regions. It can supply a new method to appraise pressure comfort.

Investigation on the shaft voltage generation of large synchronous turboalternators

2020 ◽  
Vol 39 (5) ◽  
pp. 1145-1156
Author(s):  
Kevin Darques ◽  
Abdelmounaïm Tounzi ◽  
Yvonnick Le-menach ◽  
Karim Beddek
Keyword(s):  
Finite Element ◽  
Design Methodology ◽  
Short Circuit ◽  
Element Model ◽  
Stator Winding ◽  
Content Type ◽  
Voltage Generation ◽  
The Impact ◽  
Investigation Process ◽  
Circulating Currents

Purpose This paper aims to go deeper on the analysis of the shaft voltage of large turbogenerators. The main interest of this study is the investigation process developed. Design/methodology/approach The analysis of the shaft voltage because of several defects is based on a two-dimensional (2D) finite element modeling. This 2D finite element model is used to determine the shaft voltage because of eccentricities or rotor short-circuit. Findings Dynamic eccentricities and rotor short circuit do not have an inherent impact on the shaft voltage. Circulating currents in the stator winding because of defects impact the shaft voltage. Originality/value The original value of this paper is the investigation process developed. This study proposes to quantify the impact of a smooth stator and then to explore the contribution of the real stator winding on the shaft voltage.

Numerical Simulation of the Effects of Preheating on Electron Beam Additive Manufactured Ti-6Al-4V Build Plate

2016 ◽  
Vol 879 ◽  
pp. 274-278 ◽  
Author(s):  
Jun Cao ◽  
Philip Nash
Keyword(s):  
Numerical Simulation ◽  
Residual Stress ◽  
Finite Element ◽  
Electron Beam ◽  
Cross Section ◽  
Element Model ◽  
Normal Direction ◽  
Thermal Residual Stresses ◽  
Longitudinal Residual Stress ◽  
Middle Cross Section

In an earlier study, a 3-D thermomechanical coupled finite element model was built and experimentally validated to investigate the evolution of the thermal residual stresses and distortions in electron beam additive manufactured Ti-6Al-4V build plates. In this study, an investigation using this robust and accurate model was focused on an efficient preheating method, in which the electron beam quickly scanned across the substrate to preheat the build plate prior to the deposition. Various preheat times, beam powers, scan rates, scanning paths and cooling times (between the end of current preheat scan/deposition layer and the beginning of the next preheat scan/deposition layer) were examined, and the maximum distortion along the centerline of the substrate and the maximum longitudinal residual stress along the normal direction on the middle cross-section of the build plate were quantitatively compared. The results show that increasing preheat times and beam powers could effectively reduce both distortion and residual stress for multiple layers/passes components.

Topology Optimization Design of High Pressure Storage Tank Structure

2012 ◽  
Vol 430-432 ◽  
pp. 828-833
Author(s):  
Qiu Sheng Ma ◽  
Yi Cai ◽  
Dong Xing Tian
Keyword(s):  
Finite Element ◽  
High Pressure ◽  
Topology Optimization ◽  
Storage Tank ◽  
Optimization Design ◽  
Influence Factors ◽  
Element Model ◽  
Design Variables ◽  
Calculation Results ◽  
Pressure Storage

In this paper, based on ANSYS the topology optimization design for high pressure storage tank was studied by the means of the finite element structural analysis and optimization. the finite element model for optimization design was established. The design variables influence factors and rules on the optimization results are summarized. according to the calculation results the optimal design result for tank is determined considering the manufacturing and processing. The calculation results show that the method is effective in optimization design and provide the basis to further design high pressure tank.

Structural Optimization of the Telescopic Boom of a Certain Type of Truck-Mounted Crane

2014 ◽  
Vol 548-549 ◽  
pp. 383-388
Author(s):  
Zhi Wei Chen ◽  
Zhe Cui ◽  
Yi Jin Fu ◽  
Wen Ping Cui ◽  
Li Juan Dong ◽  
...  
Keyword(s):  
Finite Element ◽  
Static Analysis ◽  
Cross Sections ◽  
Optimization Design ◽  
Structural Parameters ◽  
Vertical Direction ◽  
Element Model ◽  
Shape Parameters ◽  
Conventional Design ◽  
Design Variables

Parametric finite element model for a commonly used telescopic boom structure of a certain type of truck-mounted crane has been established. Static analysis of the conventional design configuration was performed first. And then an optimization process has been carried out to minimize the total weight of the telescopic structures. The design variables include the geometric shape parameters of the cross-sections and the integrated structural parameters of the telescopic boom. The constraints include the maximum allowable equivalent stresses and the flexure displacements at the tip of the assembled boom structure in both the vertical direction and the circumferential direction of the rotating plane. Compared with the conventional design, the optimization design has achieved a significant weight reduction of up to 24.3%.

Optimization Design of Pressure Shell in Underwater Vehicle Based on Response Surface Model

2009 ◽  
Vol 419-420 ◽  
pp. 89-92
Author(s):  
Zhuo Yi Yang ◽  
Yong Jie Pang ◽  
Zai Bai Qin
Keyword(s):  
Finite Element ◽  
Response Surface ◽  
Optimization Design ◽  
Engineering Application ◽  
Element Model ◽  
Response Surface Model ◽  
Design Stage ◽  
Surface Model ◽  
Design Variables ◽  
Structure Strength

Cylinder shell stiffened by rings is used commonly in submersibles, and structure strength should be verified in the initial design stage considering the thickness of the shell, the number of rings, the shape of ring section and so on. Based on the statistical techniques, a strategy for optimization design of pressure hull is proposed in this paper. Its central idea is that: firstly the design variables are chosen by referring criterion for structure strength, then the samples for analysis are created in the design space; secondly finite element models corresponding to the samples are built and analyzed; thirdly the approximations of these analysis are constructed using these samples and responses obtained by finite element model; finally optimization design result is obtained using response surface model. The result shows that this method that can improve the efficiency and achieve optimal intention has valuable reference information for engineering application.

Free Vibration Analysis for Tapered Cross-Section Steel-Concrete Composite Material Beam

2017 ◽  
Vol 893 ◽  
pp. 380-383
Author(s):  
Jun Xia ◽  
Z. Shen ◽  
Kun Liu
Keyword(s):  
Finite Element ◽  
Composite Material ◽  
Cross Section ◽  
Vibration Analysis ◽  
Free Vibration Analysis ◽  
Element Model ◽  
Composite Beams ◽  
Shear Connection ◽  
The Common ◽  
Interlayer Slip

The tapered cross-section beams made of steel-concrete composite material are widely used in engineering constructions and their dynamic behavior is strongly influenced by the type of shear connection jointing the two different materials. The 1D high order finite element model for tapered cross-section steel-concrete composite material beam with interlayer slip was established in this paper. The Numerical results for vibration nature frequencies of the composite beams with two typical boundary conditions were compared with ANSYS using 2D plane stress element. The 1D element is more efficient and economical for the common tapered cross-section steel-concrete composite material beams in engineering.

Optimization design of titanium alloy connecting rod based on structural topology optimization

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Bin Zheng ◽  
Yi Cai ◽  
Kelun Tang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Topology Optimization ◽  
Optimization Design ◽  
Equivalent Stress ◽  
Connecting Rod ◽  
Element Analysis ◽  
Content Type ◽  
The Finite Element Analysis ◽  
Maximum Equivalent Stress

Purpose The purpose of this paper is to realize the lightweight of connecting rod and meet the requirements of low energy consumption and vibration. Based on the structural design of the original connecting rod, the finite element analysis was conducted to reduce the weight and increase the natural frequencies, so as to reduce materials consumption and improve the energy efficiency of internal combustion engine. Design/methodology/approach The finite element analysis, structural optimization design and topology optimization of the connecting rod are applied. Efficient hybrid method is deployed: static and modal analysis; and structure re-design of the connecting rod based on topology optimization. Findings After the optimization of the connecting rod, the weight is reduced from 1.7907 to 1.4875 kg, with a reduction of 16.93%. The maximum equivalent stress of the optimized connecting rod is 183.97 MPa and that of the original structure is 217.18 MPa, with the reduction of 15.62%. The first, second and third natural frequencies of the optimized connecting rod are increased by 8.89%, 8.85% and 11.09%, respectively. Through the finite element analysis and based on the lightweight, the maximum equivalent stress is reduced and the low-order natural frequency is increased. Originality/value This paper presents an optimization method on the connecting rod structure. Based on the statics and modal analysis of the connecting rod and combined with the topology optimization, the size of the connecting rod is improved, and the static and dynamic characteristics of the optimized connecting rod are improved.

Electric Bus Body Lightweight Design Based on Multiple Constrains

2012 ◽  
Vol 538-541 ◽  
pp. 3137-3144 ◽  
Author(s):  
Wen Wei Wang ◽  
Cheng Jun Zhou ◽  
Cheng Lin ◽  
Jiao Yang Chen
Keyword(s):  
Finite Element ◽  
Lightweight Design ◽  
Element Model ◽  
The Body ◽  
Body Frame ◽  
Electric Bus ◽  
Free Model ◽  
Bus Body ◽  
The Finite Element Model ◽  
Torsion Condition

The finite-element model of pure electric bus has been built and the free model analysis, displacement and stress analysis under bending condition and torsion condition have been conducted. Optimally design the pure electric bus frame based on multiple constrains. Reduce the body frame quality by 4.3% and meanwhile meet the modal and stress requirements.

Analysis on sealing performance of VL seals based on mixed lubrication theory

2019 ◽  
Vol 71 (1) ◽  
pp. 54-60 ◽  
Author(s):  
Shixian Xu ◽  
Zhengtao Su ◽  
Jian Wu
Keyword(s):  
Finite Element ◽  
Film Thickness ◽  
Finite Element Model ◽  
Friction Factor ◽  
Contact Pressure ◽  
Element Model ◽  
Mixed Lubrication ◽  
Content Type ◽  
Deformation Mechanics ◽  
The Finite Element Model

Purpose This paper aims to research the influence of pressure, friction factors, roughness and actuating speed to the mixed lubrication models of outstroke and instroke. Design/methodology/approach Mixed lubrication model is solved by finite volume method, which consists of coupled fluid mechanics, deformation mechanics and contact mechanics analyses. The influence of friction factor on the finite element model is also considered. Then, contact pressure, film thickness, friction and leakage have been studied. Findings It was found that the amount of leakage is sensitive to the film thickness. The larger the film thickness is, the greater the influence received from the friction factor, however, the effect of oil film on the friction is negligible. The friction is determined mainly by the contact pressure. The trend of friction and leakage influenced by actuating velocity and roughness is also obtained. Originality/value The influence of friction factor on the finite element model is considered. This can make the calculation more accurate.

Sign in / Sign up

Export Citation Format

Share Document