Multifunctional modified cotton fabric by one-step process using eco-friendly phytic acid and 1, 2, 3, 4-butanetetracarboxylic acid

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Yinchun Fang ◽  
Xinhua Liu ◽  
Hailong Liu ◽  
Qian Wang
Keyword(s):  
Phytic Acid ◽  
Cotton Fabric ◽  
Flame Retardancy ◽  
Cotton Fiber ◽  
Oxygen Index ◽  
Step Method ◽  
Limiting Oxygen Index ◽  
Content Type ◽  
One Step ◽  
Butanetetracarboxylic Acid

PurposeCotton is one of the most common nature textile fiber that is widely used in clothing, bedding and decorative fields due to its comfort. However, the cellulosic cotton fiber has its own drawbacks. Cotton fiber belongs to flammable material with the limiting oxygen index (LOI) value about 18% that restricts its applications. Cotton fiber is easy to crease during the repeat wearing and laundering process that will influence the wearability. Therefore, it is very important to improve the flame retardancy and anticrease performance of cotton fabric.Design/methodology/approachIn this study, flame retardant and anticrease multifunctional modifications of cotton fabric were conducted by one-step pad–dry–cure process using eco-friendly phytic acid and 1, 2, 3, 4-butanetetracarboxylic acid.FindingsThe results of limited oxygen index (LOI) values and vertical burning test indicate that the flame retardancy of modified cotton fabric was greatly improved. The LOI value of modified cotton fabric reached 30.8% when the usage of phytic acid was 12%. The crease recovery angle was over 250° of the modified cotton fabric revealing good anticrease performance.Originality/valueThis research provides a novel feasible cost-effective one-step method for the multifunctional modified cellulosic fiber using eco-friendly chemical agents.

Development of thermally stable and hygienic colored cotton fabric made by treatment with natural coconut shell extract

2017 ◽  
Vol 48 (1) ◽  
pp. 87-118 ◽  
Author(s):  
MD Teli ◽  
Pintu Pandit
Keyword(s):  
Fourier Transform ◽  
Flame Retardant ◽  
Cotton Fabric ◽  
Oxygen Index ◽  
Fourier Transform Infrared ◽  
Cotton Fabrics ◽  
Energy Dispersive ◽  
Coconut Shell ◽  
Flame Resistance ◽  
Limiting Oxygen Index

As far as the value addition of textile is concerned, flame retardancy of textile materials is considered to be one of the most important properties in textile finishing by both industries as well as academic researchers. Flame-retardant property with thermal stability was imparted to cotton by using green coconut ( Cocos nucifera Linn) shell extract, a natural waste source of coconut. Coconut shell extract was analyzed by high-performance liquid chromatography, Fourier transform infrared spectroscopy, energy-dispersive spectrometry and its phytochemical analysis was also carried out. The coconut shell extract (acidic after extraction) was applied in three different pH (acidic, neutral, and alkaline) conditions to the cotton fabric. Flame-retardant properties of the untreated and the treated cotton fabrics were analyzed by limiting oxygen index and vertical flammability. The study showed that all the treated fabrics had good flame resistance property compared to that of the untreated fabric. The limiting oxygen index value was found to increase by 72.2% after application of the coconut shell extract from alkaline pH. Pyrolysis and char formation behavior of the concerned fabrics were studied using thermogravimetric analysis and differential scanning calorimetric analysis in a nitrogen atmosphere. The physicochemical composition of the untreated and coconut shell extract treated cotton fabrics were analyzed by attenuated total reflection–Fourier transform infrared, scanning electron microscope, and energy-dispersive X-ray spectroscopy. Also, treated cotton fabric showed natural brown color and antibacterial property against both Gram-positive and Gram-negative bacteria. The durability of the flame-retardant functionality to washing with soap solution has also been studied and reported in this paper.

scholarly journals Influence of mica mineral on flame retardancy and mechanical properties of intumescent flame retardant polypropylene composites

2021 ◽  
Vol 19 (1) ◽  
pp. 904-915
Author(s):  
Merve Kahraman ◽  
Nilgün Kızılcan ◽  
Mehmet Ali Oral
Keyword(s):  
Synergistic Effect ◽  
Flame Retardancy ◽  
Oxygen Index ◽  
Mechanical Tests ◽  
Efficiency Enhancement ◽  
Cost Performance ◽  
Limiting Oxygen Index ◽  
Polypropylene Composites ◽  
Polymeric Compounds ◽  
Ul 94

Abstract In many plastic applications, improvement of the flame retardancy is a very significant topic. Polypropylene (PP) is used in many applications such as housing industry due to its cost performance efficiency. Enhancement of flame retardancy properties of PP is necessary in many applications. In this study, the investigation focuses on the synergistic effect of mica mineral and IFR in enhancing the flame retardancy properties of PP in order to achieve cost competitive solution, so as to provide that different/various ratios of IFR and mica mineral were added into PP to compose 30 wt% of the total mass of the polymeric compounds. The synergistic effect of mica mineral with IFR in PP was investigated by limiting oxygen index (LOI), glow wire test (GWT), UL-94 test, thermal gravimetric analyses (TGA), and mechanical tests. The results from LOI, UL 94, and GWT tests indicated that mica added to PP/IFR compound has a synergistic flame retardancy effects with the IFR system. When the content of mica was 6 wt%, LOI value of PP compound reaches to 34.9% and becomes V-0 rating (3.2 mm) in UL 94 flammability tests and compounds pass GWT tests both at 750 and 850°C.

The Flammability of Polyacrylonitrile and Its Copolymers I. The Flammability Assessment Using Pressed Powdered Polymer Samples

1993 ◽  
Vol 11 (5) ◽  
pp. 442-456 ◽  
Author(s):  
Jun Zhang ◽  
Michael E. Hall ◽  
A. Richard Horrocks
Keyword(s):  
Flame Retardant ◽  
Flame Retardancy ◽  
Flame Retardants ◽  
Oxygen Index ◽  
Char Residue ◽  
Acrylic Polymer ◽  
Limiting Oxygen Index ◽  
Convenient Means ◽  
Burning Rates ◽  
Polymer Flammability

This paper is the first in a series of four which investigates the burning behaviour and the influence of flame retardant species on the flam mability of fibre-forming polymer and copolymers of acrylonitrile. A pressed powdered polymer sheet technique is described that enables a range of polymer compositions in the presence and absence of flame retardants to be assessed for limiting oxygen index, burning rate and char residue deter minations. The method offers a rapid, reproducible and convenient means of screening possible flame retardant systems, and LOI values compare favourably with those of films and fabrics comprising the same polymeric type. Burning rates, however, are sensitive to changes in physical sample character such as form (film vs. powder sheet) and density. Thus the technique forms an excellent basis for the generation of burning data which will enable comprehensive studies of acrylic polymer flammability and flame retardancy to be undertaken.

scholarly journals Enhancement of Flame Retardancy of Colorless and Transparent Semi-Alicyclic Polyimide Film from Hydrogenated-BPDA and 4,4′-oxydianiline via the Incorporation of Phosphazene Oligomer

Polymers ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 90
Author(s):  
Xiao Wu ◽  
Ganglan Jiang ◽  
Yan Zhang ◽  
Lin Wu ◽  
Yanjiang Jia ◽  
...  
Keyword(s):  
Heat Release ◽  
Flame Retardancy ◽  
Oxygen Index ◽  
Composite Films ◽  
Optical Transmittance ◽  
Polyimide Film ◽  
Total Heat Release ◽  
Limiting Oxygen Index ◽  
Biphenyltetracarboxylic Dianhydride ◽  
Thermal Stability Of

Enhancement of flame retardancy of a colorless and transparent semi-alicyclic polyimide (PI) film was carried out by the incorporation of phosphazene (PPZ) flame retardant (FR). For this purpose, PI-1 matrix was first synthesized from hydrogenated 3,3′,4,4′-biphenyltetracarboxylic dianhydride (HBPDA) and 4,4′-oxydianiline (ODA). The soluble PI-1 resin was dissolved in N,N-dimethylacetamide (DMAc) to afford the PI-1 solution, which was then physically blended with PPZ FR with the loading amounts in the range of 0–25 wt.%. The PPZ FR exhibited good miscibility with the PI-1 matrix when its proportion was lower than 10 wt.% in the composite films. PI-3 composite film with the PPZ loading of 10 wt.% showed an optical transmittance of 75% at the wavelength of 450 nm with a thickness of 50 μm. More importantly, PI-3 exhibited a flame retardancy class of UL 94 VTM-0 and reduced total heat release (THR), heat release rate (HRR), smoke production rate (SPR), and rate of smoke release (RSR) values during combustion compared with the original PI-1 film. In addition, PI-3 film had a limiting oxygen index (LOI) of 30.9%, which is much higher than that of PI-1 matrix (LOI: 20.1%). Finally, incorporation of PPZ FR decreased the thermal stability of the PI films. The 10% weight loss temperature (T10%) and the glass transition temperature (Tg) of the PI-3 film were 411.6 °C and 227.4 °C, respectively, which were lower than those of the PI-1 matrix (T10%: 487.3 °C; Tg: 260.6 °C)

Flammability and thermal properties of cotton fabrics modified with a novel flame retardant containing triazine and phosphorus components

2016 ◽  
Vol 87 (11) ◽  
pp. 1367-1376 ◽  
Author(s):  
Chaohong Dong ◽  
Zhou Lu ◽  
Peng Wang ◽  
Ping Zhu ◽  
Xuechao Li ◽  
...  
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Cotton Fabric ◽  
Flame Retardancy ◽  
Decomposition Temperature ◽  
Cotton Fabrics ◽  
Cone Calorimetry ◽  
Limiting Oxygen Index ◽  
Untreated Cotton ◽  
Index Value

A novel formaldehyde-free flame retardant containing phosphorus and dichlorotriazine components (CTAP) for cotton fabrics was synthesized. As an active group, the dichlorotriazine could react with cotton fabric via covalent reaction. The addition of 20.7 wt% CTAP into the cotton fabric obtained a high limiting oxygen index value of 31.5%, which was 13.5% higher than the pure cotton fabric. The results of heat release rate, total heat release and effective heat combustion indicated that CTAP effectively imparted flame retardancy to cotton fabric by the cone calorimetry test. With respect to the untreated cotton fabrics, the treated cotton fabrics degraded at lower decomposition temperature and form a consistent and compact char layer, which could be observed by thermogravimetric analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. Compared to the untreated cotton fabrics, CTAP performed an effective role in flame retardancy for treated cotton fabrics. Meanwhile, it stimulated the formation of char and promoted the thermal stability of treated cotton fabrics during combustion.

Flame Retardant Effect of a Modified Intumescent Flame Retardant on a Rigid Polyurethane Foam

2017 ◽  
Vol 748 ◽  
pp. 51-54
Author(s):  
Pei Bang Dai ◽  
Lin Ying Yang ◽  
Ting Zheng ◽  
Chang Qin ◽  
Qi Chen Tang
Keyword(s):  
Flame Retardant ◽  
Flame Retardancy ◽  
Oxygen Index ◽  
Intumescent Flame Retardant ◽  
Limiting Oxygen Index ◽  
Composite Foam ◽  
Composite Foams ◽  
Suitable Amount ◽  
Ul 94 ◽  
Pu Foams

A rigid polyurethane (PU) flame retardant composite foam was prepared by the compounding of polyols and diisocyanates with a modified intumescent flame retardant (MIFR). The MIFR was based on the three components of intumescent flame retardant normally used and was modified in a surfactant TX-10 solution. The flame retardancy of the PU flame retardant composite foams were evaluated by using the limiting oxygen index (LOI), the UL-94 (vertical flame) test and scanning electron microscopy (SEM). When MIFR was fixed at 20.0 wt% in PU/MIFR composite foams, the MIFR could enhance the flame retardancy and pass V-0 rating of UL-94 test. The microstructures observed by SEM demonstrate that a suitable amount of MIFR can promote formation of compact intumescent charred layers in PU foams.

Study on the Synthesis and Characterization of a Novel Phosphorus-Nitrogen Containing Intumescent Flame Retardant

2011 ◽  
Vol 399-401 ◽  
pp. 1376-1380
Author(s):  
Li Hua You ◽  
Yin Yin Hui ◽  
Xiang Ning Shi ◽  
Zhi Han Peng
Keyword(s):  
Molecular Structure ◽  
Thermal Properties ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Oxygen Index ◽  
Phosphinic Acid ◽  
Intumescent Flame Retardant ◽  
Synthesis And Characterization ◽  
Limiting Oxygen Index

In this study, a novel phosphorus-nitrogen containing intumescent flame retardant (P-N IFR) poly(melamine 2-carboxyethyl(phenyl) phosphate)(PMCEP) was prepared via the reaction of 2-carboxyethyl (phenyl) phosphinic acid (CEPPA) and melamine (MEL) in two-steps. Meanwhile, the molecular structure of the chemical compound was determined by FTIR,1H-NMR and elemental analysis; and the thermal properties was investigated by means of TGA. Combustion studies revealed high limiting oxygen index (LOI) indicative of better flame-retardancy properties for PBT resin.

scholarly journals Preparation and Test of UV Resistant and Flame Retardant Cotton Fabric With Phytic Acid, Tannic Acid and Diethylenetriamine as Raw Materials

2021 ◽  
Author(s):  
Xiang Zhou ◽  
Yankun Yin ◽  
Zhiyu Huang ◽  
Lu Fu ◽  
Shaohua Chen ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Phytic Acid ◽  
Cotton Fabric ◽  
Tannic Acid ◽  
Photoelectron Spectroscopy ◽  
Raw Materials ◽  
Cone Calorimetry ◽  
Limiting Oxygen Index ◽  
Ultraviolet Resistance ◽  
Ultraviolet Protection

Abstract Although cotton fabric is widely used in various fields because of its unique advantages, it has the disadvantages of flammability and poor ultraviolet protection. By combining diethylenetriamine(DETA)、phytic acid (PA) and tannic acid(TA) on cotton fabric, a chemical reaction intumescent flame retardant cotton fabric with anti-ultraviolet and anti-flame retardant was developed. The flame retardant and ultraviolet resistance of cotton fabric were characterized by limiting oxygen index (LOI) test, vertical combustion test, cone calorimetry test and ultraviolet resistance test. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR) and other tests were used to analyze the chemical composition, surface morphology and residual carbon after combustion of the cotton fabric, and it was confirmed that the modified cotton fabric has good ultraviolet resistance and flame retardant performance. In this study, an eco-friendly cotton fabric treatment method was proposed, which made cotton fabric have anti-ultraviolet and flame retardant properties, and a new application of tannic acid and phytic acid in ultraviolet protection and flame retardant of fabric was put forward.

scholarly journals Application of modified phytic acid as flame retardant in cellulosic paper

BioResources ◽  
2021 ◽  
Vol 16 (4) ◽  
pp. 7953-7965
Author(s):  
Qijie Chen ◽  
Zhi Rong ◽  
Zhuo Liu ◽  
Na You ◽  
Guangyang Xie
Keyword(s):  
Flame Retardant ◽  
Phytic Acid ◽  
Oxygen Index ◽  
Impregnation Method ◽  
X Ray Diffraction ◽  
Limiting Oxygen Index ◽  
X Ray ◽  
Char Length ◽  
Cellulosic Paper ◽  
Scanning Electron

A flame retardant containing phosphorus and nitrogen was synthesized using phytic acid and dicyandiamide, and it was subsequently used to prepare flame-retardant cellulosic paper via an impregnation method. Vertical flame and limiting oxygen index (LOI) were used to evaluate the flame retardancy of the paper. The paper containing modified phytic acid was characterized with Fourier transform infrared spectroscopy (FTIR), thermogravimetry (TG), X-ray diffraction (XRD), and scanning electron microscopy (SEM). When the concentration of modified phytic acid was 20%, the char length of the treated paper decreased from 12.5 cm to 4.1 cm, the LOI value increased from 19.6% to 41.5%, and the tensile index was only 3.66% lower than that of the control paper. The modified phytic acid was judged to have good flame-retardant effects on the paper.

Sign in / Sign up

Export Citation Format

Share Document