Design of functional cotton fabric via modified carbon nanotubes

2020 ◽  
Vol 49 (1) ◽  
pp. 71-78
Author(s):  
Jia Xu ◽  
Jing Yu Zhang ◽  
Jiahan Xu ◽  
Yuqi Chang ◽  
Feilong Shi ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Heat Release ◽  
Flame Retardant ◽  
Cotton Fabric ◽  
Content Type ◽  
Dimethyl Phosphite ◽  
Untreated Cotton ◽  
Static Contact ◽  
Fabric Surface ◽  
Combustion Calorimeter

Purpose One of the intensively developed in recent years new materials are hybrid textiles modified with carbon nanotubes (CNT). In this paper, CNTs was modified by grafting dimethyl phosphite and perfluorohexyl iodine. It was applied to the cotton to obtain the flame-retardant, water-repellent, ultraviolet-resistant and conductive multifunctional fabric. Design/methodology/approach The modified CNTs were loaded onto cotton fabric by impregnation and drying. The CNTs-multi was synthesized by grafted dimethyl phosphite and perfluorohexyl chain and applied to the cotton by dipping-drying method. The surface chemistry of functionalized CNTs was characterized by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy (XPS). The combustion properties were evaluated using a microscale combustion calorimeter, match test and TGA analysis. Surface hydrophilicity and hydrophobicity of fabric surface was characterized by static contact angle, and the UV resistance of the fabric was represented by the UPF value. Findings Dimethyl phosphite and perfluorohexyl chain were grafted on the surface of CNTs successively. The quantity of each component on the surface of CNTs was calculated according to XPS results. According to miniature combustion calorimeter data, both the value of maximum heat release rate (PHRR) and total heat release (THR) of CNTs -multi/cotton was about 65% lower than that of untreated cotton fabric. The residue after combustion of CNTs -multi/ cotton in the match test was more compact. The electrical conductivity of multi/ cotton is 225.6 kΩ/□, which is better than that of untreated cotton fabric. The UPF value of CNTs-multi/cotton reached 121, which was indicated that the anti-ultraviolet performance of CNTs-multi was greatly improved. Research limitations/implications Modifying method to increase the functional component amuount on the CNTs surface still need to be explored, which could increase the hydrophobicity. How to further improve the functional effect and the general synthetic steps will be of great significance to the preparation of multifunctional modified cotton fabric. Practical implications This modifying method can be used in any of multifunctional textile preparation process. The UV-resistant and flame retardant cotton fabric was revealed as a sample for use in outdoor sports such as clothes and tents. Originality/value To meet the needs of multifunctional cotton fabric, the modification of CNTs with dimethyl phosphite and perfluorohexyl iodine has not been reported. The modified fabric has flame-retardant, UV-resistant conductive and conductive properties.

Synthesis and properties of cotton fabric functionalized by dimethyl phosphite and perfluorohexyl group grafted graphene oxide

2019 ◽  
Vol 48 (6) ◽  
pp. 515-522
Author(s):  
Jia Xu ◽  
Jingyu Zhang ◽  
Jiahan Xu ◽  
Guangyuan Miao ◽  
Long Feng ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Flame Retardant ◽  
Cotton Fabric ◽  
Hydrophobic Effect ◽  
Content Type ◽  
Dimethyl Phosphite ◽  
Untreated Cotton ◽  
Static Contact ◽  
Wide Range ◽  
Fabric Surface

Purpose Nanotechnology has been able to bind to a wide range of functional textiles in recently. This paper aims to modify graphene oxide (GO) by grafting dimethyl phosphite and perfluorohexyl iodine. It was applied to cotton to obtain a flame-retardant, water-repellent and ultraviolet-resistant multifunctional fabric. Design/methodology/approach The GO-multi was synthesized by grafted dimethyl phosphite and perfluorohexyl chain and applied to cotton by the dipping-drying method. The surface chemistry of functionalized GO was characterized by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The thermal stability of the fabric was characterized by thermogravimetric analysis (TGA). The combustion properties were evaluated using a microscale combustion calorimeter, match test and TGA. Hydrophobicity of film and fabric surface was characterized by static contact angle, and the UV resistance of the fabric was represented by the ultroviolet procetion factor (UPF) value. Findings Dimethyl phosphite and perfluorohexyl chains were grafted on the surface of GO successively. In the match test, the GO-multi/cotton kept the original outline of the fabric. According to the micro-scale combustion calorimetry (MCC) data, the value of PHRR and THR of GO-multi/cotton was about 45 per cent lower than that of untreated cotton fabric. It was found from the field-emission scanning electron microscopy (SEM) pictures that the residue of GO-multi/ cotton burned by the match method was more compact and the graphene lamellar structure remained more complete. The hydrophobic effect of GO-multi/cotton was improved compared to untreated cotton, but not better than the fabric treated by the perfluorohexyl chain-grafted GO. The UPF value of GO-multi/cotton reached 253, which indicated that the anti-ultraviolet performance of GO-multi was greatly improved after it was deposited on the cotton fabric. Research limitations/implications Although the hydrophobic effect was much higher than that of untreated cotton fabric, its hydrophobic effect was not satisfied, which may be due to the fact that the content of F element content was low. So, it is still needed to explore the modifying method to increase the functional component amount on the GO nanosheet. Practical implications This modifying method can be used in any of multifunctional textile preparation process. The hydrophobic and flame-retardant cotton fabric revealed a sample for use in outdoor sports such as clothes and tents. Originality/value To meet the needs of multifunctional cotton fabrics, the modification of GO with dimethyl phosphite and perfluorohexyl iodine has not been reported. The modified fabric has flame-retardant, UV-resistant and hydrophobic properties.

Flammability and thermal properties of cotton fabrics modified with a novel flame retardant containing triazine and phosphorus components

2016 ◽  
Vol 87 (11) ◽  
pp. 1367-1376 ◽  
Author(s):  
Chaohong Dong ◽  
Zhou Lu ◽  
Peng Wang ◽  
Ping Zhu ◽  
Xuechao Li ◽  
...  
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Cotton Fabric ◽  
Flame Retardancy ◽  
Decomposition Temperature ◽  
Cotton Fabrics ◽  
Cone Calorimetry ◽  
Limiting Oxygen Index ◽  
Untreated Cotton ◽  
Index Value

A novel formaldehyde-free flame retardant containing phosphorus and dichlorotriazine components (CTAP) for cotton fabrics was synthesized. As an active group, the dichlorotriazine could react with cotton fabric via covalent reaction. The addition of 20.7 wt% CTAP into the cotton fabric obtained a high limiting oxygen index value of 31.5%, which was 13.5% higher than the pure cotton fabric. The results of heat release rate, total heat release and effective heat combustion indicated that CTAP effectively imparted flame retardancy to cotton fabric by the cone calorimetry test. With respect to the untreated cotton fabrics, the treated cotton fabrics degraded at lower decomposition temperature and form a consistent and compact char layer, which could be observed by thermogravimetric analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. Compared to the untreated cotton fabrics, CTAP performed an effective role in flame retardancy for treated cotton fabrics. Meanwhile, it stimulated the formation of char and promoted the thermal stability of treated cotton fabrics during combustion.

scholarly journals Environmentally Benign Phytic Acid-Based Nanocoating for Multifunctional Flame-Retardant/Antibacterial Cotton

Fibers ◽  
2021 ◽  
Vol 9 (11) ◽  
pp. 69
Author(s):  
Eva Magovac ◽  
Bojana Vončina ◽  
Ana Budimir ◽  
Igor Jordanov ◽  
Jaime C. Grunlan ◽  
...  
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Phytic Acid ◽  
Environmentally Benign ◽  
Lower Amount ◽  
Layer By Layer ◽  
Limiting Oxygen Index ◽  
Untreated Cotton ◽  
Microscale Combustion Calorimeter ◽  
Combustion Calorimeter

Environmentally benign layer-by-layer (LbL) deposition was used to obtain flame-retardant and antimicrobial cotton. Cotton was coated with 8, 10, and 12 phytic acid (PA) and chitosan (CH)-urea bilayers (BL) and then immersed into copper (II) sulfate (CuSO4) solution. Our findings were that 12 BL of PA/CH-urea + Cu2+ were able to stop flame on cotton during vertical flammability testing (VFT) with a limiting oxygen index (LOI) value of 26%. Microscale combustion calorimeter (MCC) data showed a reduction of peak heat release rates (pHRR) of more than 61%, while the reduction of total heat release (THR) was more than 54%, relative to untreated cotton. TG-IR analysis of 12 BL-treated cotton showed the release of water, methane, carbon dioxide, carbon monoxide, and aldehydes, while by adding Cu2+ ions, the treated cotton produces a lower amount of methane. Treated cotton also showed no levoglucosan. The intumescent behavior of the treatment was indicated by the bubbled structure of the post-burn char. Antibacterial testing showed a 100% reduction of Klebsiella pneumoniae and Staphylococcus aureus. In this study, cotton was successfully functionalized with a multifunctional ecologically benign flame-retardant and antibacterial nanocoating, by means of LbL deposition.

scholarly journals Environmentally-Benign Phytic Acid-Based Multilayer Coating for Flame Retardant Cotton

Materials ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 5492
Author(s):  
Eva Magovac ◽  
Igor Jordanov ◽  
Jaime C. Grunlan ◽  
Sandra Bischof
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Phytic Acid ◽  
Multilayer Coating ◽  
Layer By Layer ◽  
Limiting Oxygen Index ◽  
Untreated Cotton ◽  
Average Residue ◽  
Microscale Combustion Calorimeter ◽  
Combustion Calorimeter

Chemically bleached cotton fabric was treated with phytic acid (PA), chitosan (CH) and urea by means of layer-by-layer (LbL) deposition to impart flame retardant (FR) behavior using only benign and renewable molecules. Samples were treated with 8, 10, 12 and 15 bilayers (BL) of anionic PA and cationic CH, with urea mixed into the aqueous CH solution. Flammability was evaluated by measuring limiting oxygen index (LOI) and through vertical flame testing. LOI values are comparable to those obtained with commercial flame-retardant finishes, and applying 10 or more bilayers renders cotton self-extinguishing and able to pass the vertical flame test. Microscale combustion calorimeter (MCC) measurements show the average reduction of peak heat release rate (pHRR) of all treated fabrics of ~61% and the reduction of total heat release (THR) of ~74%, in comparison to untreated cotton. Decomposition temperatures peaks (T1max) measured by thermogravimetric analyzer (TG) decreased by approximately 62 °C, while an average residue at 650 °C is ~21% for 10 and more bilayers. Images of post-burn char indicate that PA/CH-urea treatment is intumescent. The ability to deposit such a safe and effective FR treatment, with relatively few layers, makes LbL an alternative to current commercial treatments.

Synthesis and characterization of flame-retardant-wrapped carbon nanotubes and its flame retardancy in epoxy nanocomposites

2021 ◽  
pp. 096739112110245
Author(s):  
Jiangbo Wang
Keyword(s):  
Carbon Nanotubes ◽  
Heat Release ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Total Heat Release ◽  
Pristine Cnts ◽  
Peak Heat Release Rate ◽  
Ep Matrix ◽  
Better Than

A novel phosphorus-silicon containing flame-retardant DOPO-V-PA was used to wrap carbon nanotubes (CNTs). The results of FTIR, XPS, TEM and TGA measurements exhibited that DOPO-V-PA has been successfully grafted onto the surfaces of CNTs, and the CNTs-DOPO-V-PA was obtained. The CNTs-DOPO-V-PA was subsequently incorporated into epoxy resin (EP) for improving the flame retardancy and dispersion. Compared with pure EP, the addition of 2 wt% CNTs-DOPO-V-PA into the EP matrix could achieve better flame retardancy of EP nanocomposites, such as a 30.5% reduction in peak heat release rate (PHRR) and 8.1% reduction in total heat release (THR). Furthermore, DMTA results clearly indicated that the dispersion for CNTs-DOPO-V-PA in EP matrix was better than pristine CNTs.

Fabrication of temperature-regulating functional fabric based on n-octadecane/SWCNTs composite phase change material

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Wei Zhang ◽  
Jiali Weng ◽  
Shang Hao ◽  
Yuan Xie ◽  
Yonggui Li
Keyword(s):  
Thermal Conductivity ◽  
Phase Change ◽  
Latent Heat ◽  
Cotton Fabric ◽  
Screen Printing ◽  
Scanning Calorimetry ◽  
Shape Stability ◽  
Content Type ◽  
Photothermal Conversion ◽  
Fabric Surface

Purpose Fabrics with photothermal conversion functions were developed based on the introduction of shape stable composite phase change materials (CPCMs). Design/methodology/approach Acidified single-walled carbon nanotubes (SWCNTs) were selected as support material to prepare CPCMs with n-octadecane to improve the thermal conductivity and shape stability. The CPCMs were finished onto the surface of cotton fabric through the coating and screen-printing method. The chemical properties of CPCMs were characterized by Fourier transform infrared spectrometer, XRD and differential scanning calorimetry (DSC). The shape stability and thermal conductivity were also evaluated. In addition, the photothermal conversion and temperature-regulating performance of the finished fabrics were analyzed. Findings When the addition amount of acidified SWCNTs are 14% to the mass of n-octadecane, the best shape stability of CPCMs is obtained. DSC analysis shows that the latent heat energy storage of CPCMs is as high as 183.1 J/g. The thermal conductivity is increased by 84.4% compared with that of n-octadecane. The temperature-regulating fabrics coated with CPCMs have good photothermal conversion properties. Research limitations/implications CPCMs with high latent heat properties are applied to the fabric surface through screen printing technology, which not only gives the fabric the photothermal conversion performance but also reflects the design of personalized patterns. Practical implications CPCMs and polydimethylsiloxane (PDMS) are mixed to make printing paste and printed cotton fabric with temperature-regulating functional is developed. Originality/value SWCNTs and n-octadecane are composited to prepare CPCMs with excellent thermal properties, which can be mixed with PDMS to make printing paste without adding other pastes. The fabric is screen-printed to obtain a personalized pattern and can be given a thermoregulatory function.

Mechanical properties of a carbon fabric-reinforced epoxy composite with carbon nanotubes and a flame retardant

2016 ◽  
Vol 7 (5) ◽  
pp. 630-644 ◽  
Author(s):  
Martin Kadlec ◽  
Robin Hron ◽  
Liberata Guadagno
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Carbon Fibre ◽  
Flame Retardant ◽  
Mechanical Test ◽  
Fibre Volume ◽  
Morphological Properties ◽  
Flame Resistance ◽  
Content Type

Purpose The purpose of this paper is to present the mechanical and morphological characterization of new multifunctional carbon fibre-reinforced composites (CFRCs) that are able to overcome two of the main drawbacks of aeronautical composite materials: reduced electrical conductivity and poor flame resistance. Multiwall carbon nanotubes and glycidyl POSS (GPOSS) were used to simultaneously enhance electrical conductivity and flame resistance. The effect of these two combined components on the mechanical and morphological properties of the manufactured CFRCs was analysed. Design/methodology/approach This paper describes the mechanical test results obtained for interlaminar shear strength, three-point bending, and tensile and fracture toughness in mode I tests. Carbon fibre-reinforced epoxy resin plates were manufactured in two series with blank resin and CNT+flame retardant GPOSS-enhanced resin. Findings The mechanical properties were decreased by no more than 10 per cent by combined influence of CNTs and GPOSS. Agglomerates of CNTs were observed using scanning electron microscopy. The agglomerates were large enough to be visible to the naked eye as black spots on the delaminated fracture surface. The decrease of the mechanical properties could be caused by these agglomerates or by a changed fibre volume content that was affected by the difficult infusion procedure due to high resin viscosity. Originality/value If we consider the benefit of CNTs as a nanofiller to increase electrical conductivity and the GPOSS as a component to increase the flame resistance of the resin, the decrease of strength seems to be insignificant.

Interaction of Flame-Retardant and Untreated Cotton Fabrics during Burning

1977 ◽  
Vol 47 (5) ◽  
pp. 351-360 ◽  
Author(s):  
Stanley R. Hobart ◽  
Charles H. Mack
Keyword(s):  
Flame Retardant ◽  
Cotton Fabric ◽  
Flame Retardancy ◽  
Oxygen Index ◽  
Cotton Fabrics ◽  
Transfer Effect ◽  
Geometrical Configuration ◽  
Untreated Cotton ◽  
Phosphorus Containing ◽  
Flame Retarded

Transfer of flame retardancy from fabric treated with THPOH-NH3 to untreated cotton fabric during burning was observed on fabric samples sewed together with glass thread. The transfer effect was evidenced by the development of substantial char and the presence of phosphorus and nitrogen in the char of the untreated fabric. Oxygen-index determinations on multilayered combinations of flame-retarded (FR) and untreated fabrics also supported this observation. The extent of FR transfer varied with the geometrical configuration of the layers and the FR add-on. Tests showed that smoke from combustion of THPOH-NH3-treated fabric, passed through untreated cotton fabric, was the means of transfer of phosphorus, nitrogen, and flame retardancy. The FR transfer effect was also demonstrated for several other phosphorus-containing flame-retardancy treatments.

scholarly journals Preparation and characterization of flame retardant cotton fabrics

2020 ◽  
Vol 10 (2) ◽  
pp. 5296-5300
Keyword(s):  
Flame Retardant ◽  
Cotton Fabric ◽  
Cotton Fabrics ◽  
Curing Temperature ◽  
Sodium Hypophosphite ◽  
X Ray ◽  
Untreated Cotton ◽  
Prepared Glass ◽  
Ray Patterns

An inorganic flame retardant glass was prepared using the melt methods. The prepared glass was characterized using IR, X-ray. The x-ray patterns and IR charts show that the formation of glass without any crystals. Cotton fabric was finished using different percentage of glass 0.5, 1, 1.5 and 2 % (w/w) in the presence of citric acid as crosslinker and sodium hypophosphite as catalyst. The flame retardancy of finished cotton fabric was performed using Limited Oxygen Index (LOI) technique. The results of measurements show that the value of LOI of untreated cotton fabric equals 19.6, when cotton fabrics treated with different amounts of glass ranging from 0.5 to 2 %, the value of LOI increased to become 23.6 at 0.5% and 24.8 for the higher glass concentration. The effect of curing temperature and time on the properties and the LOI of cotton fabric was studied.

scholarly journals Thermal Degradation Behavior of Epoxy Resin Containing Modified Carbon Nanotubes

Polymers ◽  
2021 ◽  
Vol 13 (19) ◽  
pp. 3332
Author(s):  
Xiaohui Bao ◽  
Fangyi Wu ◽  
Jiangbo Wang
Keyword(s):  
Carbon Nanotubes ◽  
Thermal Degradation ◽  
Heat Release ◽  
Flame Retardant ◽  
Epoxy Resin ◽  
Degradation Process ◽  
Degradation Behavior ◽  
Pure Epoxy ◽  
Thermal Degradation Behavior ◽  
Thermal Degradation Process

Via the surface-grafting of carbon nanotubes (CNTs) with a silicon-containing flame retardant (PMDA), a novel flame retardant CNTs-PMDA was synthesized. The flame retardancy was tested by cone calorimeter. Compared with pure epoxy resin, the total heat release (THR) and peak heat release rate (PHRR) of epoxy resin containing CNTs-PMDA were significantly reduced, by 44.6% and 24.6%, respectively. Furthermore, thermal degradation behavior of epoxy resin based composite was studied by the thermogravimetric analysis with differences in heating rates. The kinetic parameters of the thermal degradation for epoxy resin composites were evaluated by the Kissinger method and Flynn-Wall-Ozawa method. The results suggested that activation energy values of epoxy resin containing CNTs-PMDA in thermal degradation process were higher than those of pure epoxy resin in the final stage of the thermal degradation process, which was closely related to the final formation of char layer residues. Finally, the results from Dynamic mechanical thermal analysis (DMTA) and Scanning electron microscopy (SEM) measurements exhibited that the functionalization of CNTs with PMDA obviously improved the dispersion of CNTs in the epoxy resin matrix.

Sign in / Sign up

Export Citation Format

Share Document