scholarly journals Preparation and characterization of flame retardant cotton fabrics

2020 ◽  
Vol 10 (2) ◽  
pp. 5296-5300
Keyword(s):  
Flame Retardant ◽  
Cotton Fabric ◽  
Cotton Fabrics ◽  
Curing Temperature ◽  
Sodium Hypophosphite ◽  
X Ray ◽  
Untreated Cotton ◽  
Prepared Glass ◽  
Ray Patterns

An inorganic flame retardant glass was prepared using the melt methods. The prepared glass was characterized using IR, X-ray. The x-ray patterns and IR charts show that the formation of glass without any crystals. Cotton fabric was finished using different percentage of glass 0.5, 1, 1.5 and 2 % (w/w) in the presence of citric acid as crosslinker and sodium hypophosphite as catalyst. The flame retardancy of finished cotton fabric was performed using Limited Oxygen Index (LOI) technique. The results of measurements show that the value of LOI of untreated cotton fabric equals 19.6, when cotton fabrics treated with different amounts of glass ranging from 0.5 to 2 %, the value of LOI increased to become 23.6 at 0.5% and 24.8 for the higher glass concentration. The effect of curing temperature and time on the properties and the LOI of cotton fabric was studied.

Flammability and thermal properties of cotton fabrics modified with a novel flame retardant containing triazine and phosphorus components

2016 ◽  
Vol 87 (11) ◽  
pp. 1367-1376 ◽  
Author(s):  
Chaohong Dong ◽  
Zhou Lu ◽  
Peng Wang ◽  
Ping Zhu ◽  
Xuechao Li ◽  
...  
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Cotton Fabric ◽  
Flame Retardancy ◽  
Decomposition Temperature ◽  
Cotton Fabrics ◽  
Cone Calorimetry ◽  
Limiting Oxygen Index ◽  
Untreated Cotton ◽  
Index Value

A novel formaldehyde-free flame retardant containing phosphorus and dichlorotriazine components (CTAP) for cotton fabrics was synthesized. As an active group, the dichlorotriazine could react with cotton fabric via covalent reaction. The addition of 20.7 wt% CTAP into the cotton fabric obtained a high limiting oxygen index value of 31.5%, which was 13.5% higher than the pure cotton fabric. The results of heat release rate, total heat release and effective heat combustion indicated that CTAP effectively imparted flame retardancy to cotton fabric by the cone calorimetry test. With respect to the untreated cotton fabrics, the treated cotton fabrics degraded at lower decomposition temperature and form a consistent and compact char layer, which could be observed by thermogravimetric analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. Compared to the untreated cotton fabrics, CTAP performed an effective role in flame retardancy for treated cotton fabrics. Meanwhile, it stimulated the formation of char and promoted the thermal stability of treated cotton fabrics during combustion.

Interaction of Flame-Retardant and Untreated Cotton Fabrics during Burning

1977 ◽  
Vol 47 (5) ◽  
pp. 351-360 ◽  
Author(s):  
Stanley R. Hobart ◽  
Charles H. Mack
Keyword(s):  
Flame Retardant ◽  
Cotton Fabric ◽  
Flame Retardancy ◽  
Oxygen Index ◽  
Cotton Fabrics ◽  
Transfer Effect ◽  
Geometrical Configuration ◽  
Untreated Cotton ◽  
Phosphorus Containing ◽  
Flame Retarded

Transfer of flame retardancy from fabric treated with THPOH-NH3 to untreated cotton fabric during burning was observed on fabric samples sewed together with glass thread. The transfer effect was evidenced by the development of substantial char and the presence of phosphorus and nitrogen in the char of the untreated fabric. Oxygen-index determinations on multilayered combinations of flame-retarded (FR) and untreated fabrics also supported this observation. The extent of FR transfer varied with the geometrical configuration of the layers and the FR add-on. Tests showed that smoke from combustion of THPOH-NH3-treated fabric, passed through untreated cotton fabric, was the means of transfer of phosphorus, nitrogen, and flame retardancy. The FR transfer effect was also demonstrated for several other phosphorus-containing flame-retardancy treatments.

Flame-Retardancy Transfer from FR Cotton Fabric to Cotton/Polyester Blends

1977 ◽  
Vol 47 (6) ◽  
pp. 394-397 ◽  
Author(s):  
Stanley R. Hobart ◽  
Charles H. Mack ◽  
Stanley P. Rowland
Keyword(s):  
Flame Retardant ◽  
Cotton Fabric ◽  
Flame Retardancy ◽  
Cotton Fabrics ◽  
Untreated Cotton ◽  
Phosphorus Containing ◽  
Flame Retarded ◽  
Blend Fabric

Flame-retardancy transfer from cotton fabrics flame-retarded (FR) with phosphorus-containing compounds to adjacent, untreated cotton/polyester blend fabrics was observed during burning. Reduced flammability was found for blends containing 35% or less polyester; this was indicated by the fact that the char weight for burning FR cotton and untreated blend was higher than that for separate burning; however, when the level of polyester was above 35%, there was essentially no evidence of reduced flammability. Transfer of phosphorus from FR to blend fabric was detected by analysis of chars from blends of high cotton content. Preferential pickup of flame retardant by the cotton portion of the blend is indicated.

Development of thermally stable and hygienic colored cotton fabric made by treatment with natural coconut shell extract

2017 ◽  
Vol 48 (1) ◽  
pp. 87-118 ◽  
Author(s):  
MD Teli ◽  
Pintu Pandit
Keyword(s):  
Fourier Transform ◽  
Flame Retardant ◽  
Cotton Fabric ◽  
Oxygen Index ◽  
Fourier Transform Infrared ◽  
Cotton Fabrics ◽  
Energy Dispersive ◽  
Coconut Shell ◽  
Flame Resistance ◽  
Limiting Oxygen Index

As far as the value addition of textile is concerned, flame retardancy of textile materials is considered to be one of the most important properties in textile finishing by both industries as well as academic researchers. Flame-retardant property with thermal stability was imparted to cotton by using green coconut ( Cocos nucifera Linn) shell extract, a natural waste source of coconut. Coconut shell extract was analyzed by high-performance liquid chromatography, Fourier transform infrared spectroscopy, energy-dispersive spectrometry and its phytochemical analysis was also carried out. The coconut shell extract (acidic after extraction) was applied in three different pH (acidic, neutral, and alkaline) conditions to the cotton fabric. Flame-retardant properties of the untreated and the treated cotton fabrics were analyzed by limiting oxygen index and vertical flammability. The study showed that all the treated fabrics had good flame resistance property compared to that of the untreated fabric. The limiting oxygen index value was found to increase by 72.2% after application of the coconut shell extract from alkaline pH. Pyrolysis and char formation behavior of the concerned fabrics were studied using thermogravimetric analysis and differential scanning calorimetric analysis in a nitrogen atmosphere. The physicochemical composition of the untreated and coconut shell extract treated cotton fabrics were analyzed by attenuated total reflection–Fourier transform infrared, scanning electron microscope, and energy-dispersive X-ray spectroscopy. Also, treated cotton fabric showed natural brown color and antibacterial property against both Gram-positive and Gram-negative bacteria. The durability of the flame-retardant functionality to washing with soap solution has also been studied and reported in this paper.

Layer-by-layer Assembly Polyethylenimine/phytic Acid Coating With Gradient Structure for High-Efficiency and Durable Flame Retardant Cotton Fabric With Good Physical and Mechanical Properties

2021 ◽  
Author(s):  
Xinhua Liu ◽  
Hailong Liu ◽  
Yinchun Fang
Keyword(s):  
Physical Properties ◽  
Flame Retardant ◽  
Cotton Fabric ◽  
High Efficiency ◽  
Cotton Fabrics ◽  
Gradient Structure ◽  
Layer By Layer ◽  
Assembly Method ◽  
Lbl Assembly ◽  
Coated Cotton

Abstract In this study, intumescent flame retardant coating of polyethylenimine/phytic acid (PEI/PA) with gradient structure was constructed on cotton fabric through facile layer-by-layer (LBL) assembly method. The LOI value of coated cotton fabric reached over 40% indicating excellent flame retardancy. Reasonable controlling the LBL assembly process of PEI/PA coating brought less influence to the physical properties of cotton fabrics. And the coated cotton fabric revealed good flame retardant washing durability. Thermogravimetric analysis results of coated cotton fabrics showed that PEI/PA flame retardant coating changed the thermal decomposition process and promoted char formation revealing the obviously condensed phase flame retardant action. SEM images of char residues revealed that PEI/PA flame retardant coating promoted to form the intumescent flame retardant (IFR) char layer showing obvious IFR action. This research provides novel strategy for the development of high-efficiency flame retardant cotton fabric with good durability and physical properties using simple LBL assembly method.

scholarly journals Application of Plasma Activation in Flame-Retardant Treatment for Cotton Fabric

Polymers ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 1575
Author(s):  
Huong Nguyen Thi ◽  
Khanh Vu Thi Hong ◽  
Thanh Ngo Ha ◽  
Duy-Nam Phan
Keyword(s):  
Tensile Strength ◽  
Mechanical Strength ◽  
Flame Retardant ◽  
Cotton Fabric ◽  
Photoelectron Spectroscopy ◽  
Curing Temperature ◽  
Sem Images ◽  
Limiting Oxygen Index ◽  
Xps Spectra ◽  
Plasma Activation

Cotton fabric treated by Pyrovatex CP New (PCN) and Knittex FFRC (K-FFRC) using the Pad-dry-cure method showed an excellent fire-retardant effect. However, it needed to be cured at high temperatures for a long time leading to a high loss of mechanical strength. In this study, atmospheric-pressure dielectric barrier discharge (APDBD) plasma was applied to the cotton fabric, which then was treated by flame retardants (FRs) using the pad–dry-cure method. The purpose was to have a flame-retardant cotton fabric (limiting oxygen index (LOI) ≥ 25) and a mechanical loss of the treated fabric due to the curing step as low as possible. To achieve this goal, 10 experiments were performed. The vertical flammability characteristics, LOI value and tensile strength of the treated fabrics were measured. A response model between the LOI values of the treated fabric and two studied variables (temperature and time of the curing step) was found. It was predicted that the optimal temperature and time-to-cure to achieve LOI of 25 was at 160 °C for 90 s, while the flame-retardant treatment process without plasma pretreatment, was at 180 °C and 114 s. Although the curing temperature and the time have decreased significantly, the loss of mechanical strength of the treated fabric is still high. The tensile strength and scanning electron microscopy (SEM) images of the fabric after plasma activation show that the plasma treatment itself also damages the mechanical strength of the fabric. X-ray photoelectron spectroscopy (XPS) spectra of the fabric after plasma activation and energy-dispersive spectroscopy (EDS) analysis of the flame retardant-treated (FRT) fabric clarified the role of plasma activation in this study.

Enzymatic Actions of Acid Cellulase on Cotton Fabrics

2013 ◽  
Vol 798-799 ◽  
pp. 8-11
Author(s):  
Long Yun Hao ◽  
Zong Zhong Qi ◽  
Ya Jing Men ◽  
Peng Jiao ◽  
Jian Wei Tian ◽  
...  
Keyword(s):  
Cotton Fabric ◽  
Cotton Fabrics

In this research, a commercial acid cellulase was used to treat the cotton fabric for investigating its adsorptive and hydrolytic properties. First, it was found that this cellulase could get its optimal reactivity at temperature 50°C and pH 4.5-5.5. Then, at this best condition, the adsorptive and hydrolytic performance of cellulase on cotton fabric was evaluated. The characterization of bio-treated cotton fabrics was analyzed by XRD, which demonstrated that the enzymatic attack would improve the crystallinity of the cotton.

Properties of Cotton Fabrics Crosslinked with Different Molecular Chain Lengths of Aldehyde Agents

1992 ◽  
Vol 62 (9) ◽  
pp. 547-551 ◽  
Author(s):  
Tsang-Yuh Liang ◽  
Jenn-Yann Hwang ◽  
Der-Shiann Ju ◽  
Cheng-Chi Chen
Keyword(s):  
Activation Energy ◽  
Chain Length ◽  
Cotton Fabric ◽  
Crosslinking Agent ◽  
Cotton Fabrics ◽  
Molecular Chain ◽  
Diffusion Resistance ◽  
Adsorption Time ◽  
Untreated Cotton ◽  
Chain Lengths

Adsorption time curves from finite baths have been studied for untreated cotton fabric and cottons treated with differing molecular chain lengths of aldehydes (formaldehyde and glutaraldehyde). Crosslinking reduced the rate constant, structural diffusion resistance constant, and equilibrium adsorption of dyeing. Additionally, these data decreased with increasing agent concentration and with increasing molecular chain length of the crosslinking agent. The dyeing activation energy of the glutaraldehyde treated fabric was lower than that of the formaldehyde treated fabric.

scholarly journals Preparation of BiOCl/Bi2WO6 Photocatalyst for Efficient Fixation on Cotton Fabric: Applications in UV Shielding and Self-Cleaning Performances

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7002
Author(s):  
Jiayi Chen ◽  
Kuang Wang ◽  
Jialong Tian ◽  
Wenhui Yu ◽  
Yujie Chen ◽  
...  
Keyword(s):  
Visible Light ◽  
Cotton Fabric ◽  
Photoelectron Spectroscopy ◽  
Cotton Fabrics ◽  
Diffuse Reflection Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Visible Light Driven ◽  
Blue Solution ◽  
Self Cleaning

In this work, a visible-light-driven BiOCl/Bi2WO6 photocatalyst was obtained via a facile hydrothermal method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive spectrometry (EDS), X-ray photoelectron spectroscopy (XPS), ultraviolet/visible light diffuse reflection spectroscopy (UV/Vis), and photocurrent (PC). BiOCl/Bi2WO6 was modified with (3-chloro-2-hydroxypropyl) trimethyl ammonium chloride to obtain the cationized BiOCl/Bi2WO6. Cotton fabric was pretreated with sodium hydroxide (NaOH) and sodium chloroacetate solution to obtain carboxymethylated cotton fabric, which was further reacted with cationized BiOCl/Bi2WO6 to achieve finished cotton fabric. The cotton fabrics were characterized by Fourier-transform infrared spectroscopy (FT-IR), XRD, SEM, and EDS. The photocatalytic activity of the BiOCl/Bi2WO6 photocatalyst and cotton fabrics was assessed by photocatalytic degradation of MB (methylene blue) solution under simulated visible light. The self-cleaning property of cotton fabrics was evaluated by removing MB solution and red-wine stains. Results revealed that the coated cotton fabrics exhibited appreciable photocatalytic and self-cleaning performance. In addition, anti-UV studies showed that the finished cotton fabrics had remarkable UV blocking properties in the UVA and UVB regions. Therefore, the finished cotton fabric with BiOCl/Bi2WO6 can provide a framework for the development of multifunctional textiles.

Sign in / Sign up

Export Citation Format

Share Document