Channel design for 3D models with applications in powder-bed additive manufacturing

2019 ◽  
Vol 25 (9) ◽  
pp. 1536-1544
Author(s):  
Xiangzhi Wei ◽  
Xianda Li ◽  
Shanshan Wen ◽  
Yu Zheng ◽  
Yaobin Tian
Keyword(s):  
Additive Manufacturing ◽  
3D Model ◽  
3D Models ◽  
Linear Constraints ◽  
Channel Design ◽  
Channel Network ◽  
Content Type ◽  
Powder Bed ◽  
Shortest Network ◽  
Manufacturing Techniques

Purpose For any 3D model with chambers to be fabricated in powder-bed additive manufacturing processes such as SLM and SLS, powders are trapped in the chambers of the finished model. This paper aims to design a shortest network with the least number of outlets for efficiently leaking the trapped powders. Design/methodology/approach This paper proposes a nonlinear objective with linear constraints for solving the channel design problem and a particle swarm optimization algorithm to solve the nonlinear system. Findings Structural optimization for the channel network leads to fairly short channels in the interior of the 3D models and very few outlets on the model surface, which achieves the cleaning of the powders while causing almost the least changes to the model. Originality/value This paper reveals the NP-harness of computing the shortest channel network with the least number of outlets. The proposed approach helps the design of lightweight models using the powder-bed additive manufacturing techniques.

A printability assessment framework for fabricating low variability nickel-niobium parts using laser powder bed fusion additive manufacturing

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Bing Zhang ◽  
Raiyan Seede ◽  
Austin Whitt ◽  
David Shoukr ◽  
Xueqin Huang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Uncertainty Quantification ◽  
Process Optimization ◽  
Powder Bed Fusion ◽  
Assessment Framework ◽  
Laser Powder Bed Fusion ◽  
Content Type ◽  
Powder Bed ◽  
Analytical Thermal Model

Purpose There is recent emphasis on designing new materials and alloys specifically for metal additive manufacturing (AM) processes, in contrast to AM of existing alloys that were developed for other traditional manufacturing methods involving considerably different physics. Process optimization to determine processing recipes for newly developed materials is expensive and time-consuming. The purpose of the current work is to use a systematic printability assessment framework developed by the co-authors to determine windows of processing parameters to print defect-free parts from a binary nickel-niobium alloy (NiNb5) using laser powder bed fusion (LPBF) metal AM. Design/methodology/approach The printability assessment framework integrates analytical thermal modeling, uncertainty quantification and experimental characterization to determine processing windows for NiNb5 in an accelerated fashion. Test coupons and mechanical test samples were fabricated on a ProX 200 commercial LPBF system. A series of density, microstructure and mechanical property characterization was conducted to validate the proposed framework. Findings Near fully-dense parts with more than 99% density were successfully printed using the proposed framework. Furthermore, the mechanical properties of as-printed parts showed low variability, good tensile strength of up to 662 MPa and tensile ductility 51% higher than what has been reported in the literature. Originality/value Although many literature studies investigate process optimization for metal AM, there is a lack of a systematic printability assessment framework to determine manufacturing process parameters for newly designed AM materials in an accelerated fashion. Moreover, the majority of existing process optimization approaches involve either time- and cost-intensive experimental campaigns or require the use of proprietary computational materials codes. Through the use of a readily accessible analytical thermal model coupled with statistical calibration and uncertainty quantification techniques, the proposed framework achieves both efficiency and accessibility to the user. Furthermore, this study demonstrates that following this framework results in printed parts with low degrees of variability in their mechanical properties.

Modeling and analysis of the on-demand spare parts supply using additive manufacturing

2019 ◽  
Vol 25 (3) ◽  
pp. 473-487 ◽  
Author(s):  
Yuan Zhang ◽  
Stefan Jedeck ◽  
Li Yang ◽  
Lihui Bai
Keyword(s):  
Supply Chain ◽  
Additive Manufacturing ◽  
Spare Parts ◽  
Production Optimization ◽  
Arrival Process ◽  
Powder Bed Fusion ◽  
Content Type ◽  
Modeling And Analysis ◽  
Powder Bed ◽  
On Demand

PurposeDespite the widespread expectation that additive manufacturing (AM) will become a disruptive technology to transform the spare parts supply chain, very limited research has been devoted to the quantitative modeling and analysis on how AM could fulfill the on-demand spare parts supply. On the other hand, the choice of using AM as a spare parts supply strategy over traditional inventory is a rising decision faced by manufacturers and requires quantitative analysis for their AM-or-stock decisions. The purpose of this paper is to develop a quantitative performance model for a generic powder bed fusion AM system in a spare parts supply chain, thus providing insights into this less-explored area in the literature.Design/methodology/approachIn this study, analysis based on a discrete event simulation was carried out for the use of AM in replacement of traditional warehouse inventory for an on-demand spare parts supply system. Generic powder bed fusion AM system was used in the model, and the same modeling approach could be applied to other types of AM processes. Using this model, the impact of both spare parts demand characteristics (e.g. part size attributes, demand rates) and the AM operations characteristics (e.g. machine size and postpone strategy) on the performance of using AM to supply spare parts was studied.FindingsThe simulation results show that in many cases the AM operation is not as cost competitive compared to the traditional warehouse-based spare parts supply operation, and that the spare parts size characteristics could significantly affect the overall performance of the AM operations. For some scenarios of the arrival process of spare parts demand, the use of the batched AM production could potentially result in significant delay in parts delivery, which necessitates further investigations of production optimization strategies.Originality/valueThe findings demonstrate that the proposed simulation tool can not only provide insights on the performance characteristics of using AM in the spare parts supply chain, especially in comparison to the traditional warehousing system, but also can be used toward decision making for both the AM manufacturers and the spare parts service providers.

3D printing of clay paste enhanced by scrap polymer from powder bed processes

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Mattia Mele ◽  
Michele Ricciarelli ◽  
Giampaolo Campana
Keyword(s):  
Additive Manufacturing ◽  
Volumetric Flow Rate ◽  
The Body ◽  
Fused Deposition Modelling ◽  
Powder Bed Fusion ◽  
Dimensional Error ◽  
Content Type ◽  
Powder Bed ◽  
Fused Deposition ◽  
Polymer Fraction

Purpose Powder bed additive manufacturing processes are widespread due to their many technical and economic advantages. Nevertheless, the disposal of leftover powder poses a problem in terms of process sustainability. The purpose of this paper is to provide an alternative solution to recycle waste PA12 powder from HP multi jet fusion. In particular, the opportunity to use this material as a dispersion in three-dimensional (3D) printed clay is investigated. Design/methodology/approach A commercial fused deposition modelling printer was re-adapted to extrude a viscous paste composed of clay, PA12 and water. Once printed, parts were dried and then put in an oven to melt the polymer fraction. Four compositions with different PA12 concentration were studied. First, the extrudability of the paste was observed by testing different extrusion lengths. Then, the surface porosities were evaluated through microscopical observations of the manufactured parts. Finally, benchmarks with different geometries were digitalised via 3D scanning to analyse the dimensional alterations arising at each stage of the process. Findings Overall, the feasibility of the process is demonstrated. Extrusion tests revealed that the composition of the paste has a minor influence on the volumetric flow rate, exhibiting a better consistency in the case of long extrusions. The percentage of surface cavities was proportional to the polymer fraction contained in the mix. From dimensional analyses, it was possible to conclude that PA12 reduced the degree of shrinkage during the drying phase, while it increased dimensional alterations occurring in the melting phase. The results showed that the dimensional error measured on the z-axis was always higher than that of the XY plane. Practical implications The method proposed in this paper provides an alternative approach to reuse leftover powders from powder bed fusion processes via another additive manufacturing process. This offers an affordable and open-source solution to companies dealing with polymer powder bed fusion, allowing them to reduce their environmental impacts while expanding their production. Originality/value The paper presents an innovative additive manufacturing solution for powder reuse. Unlike the recycling methods in the body of literature, this solution does not require any intermediate transformation process, such as filament fabrication. Also, the cold material deposition enables the adoption of very inexpensive extrusion equipment. This preliminary study demonstrates the feasibility and the benefits of this process, paving the way for numerous future studies.

Realistic design of laser powder bed fusion channels

2020 ◽  
Vol 26 (10) ◽  
pp. 1827-1836
Author(s):  
Christopher Gottlieb Klingaa ◽  
Sankhya Mohanty ◽  
Jesper Henri Hattel
Keyword(s):  
Surface Roughness ◽  
Prediction Models ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Channel Design ◽  
Conformal Cooling ◽  
Content Type ◽  
Powder Bed ◽  
Cooling Channels ◽  
Conformal Cooling Channels

Purpose Conformal cooling channels in additively manufactured molds are superior over conventional channels in terms of cooling control, part warpage and lead time. The heat transfer ability of cooling channels is determined by their geometry and surface roughness. Laser powder bed fusion manufactured channels have an inherent process-induced dross formation that may significantly alter the actual shape of nominal channels. Therefore, it is crucial to be able to predict the expected surface roughness and changes in the geometry of metal additively manufactured conformal cooling channels. The purpose of this paper is to present a new methodology for predicting the realistic design of laser powder bed fusion channels. Design/methodology/approach This study proposes a methodology for making nominal channel design more realistic by the implementation of roughness prediction models. The models are used for altering the nominal shape of a channel to its predicted shape by point cloud analysis and manipulation. Findings A straight channel is investigated as a simple case study and validated against X-ray computed tomography measurements. The modified channel geometry is reconstructed and meshed, resulting in a predicted, more realistic version of the nominal geometry. The methodology is successfully tested on a torus shape and a simple conformal cooling channel design. Finally, the methodology is validated through a cooling test experiment and comparison with simulations. Practical implications Accurate prediction of channel surface roughness and geometry would lead toward more accurate modeling of cooling performance. Originality/value A robust start to finish method for realistic geometrical prediction of metal additive manufacturing cooling channels has yet to be proposed. The current study seeks to fill the gap.

Effect of nAl2O3 on the part density and microstructure during the laser-based powder bed fusion of AlSi10Mg composite

2020 ◽  
Vol 26 (4) ◽  
pp. 727-735 ◽  
Author(s):  
Zhenglin Du ◽  
Hui-Chi Chen ◽  
Ming Jen Tan ◽  
Guijun Bi ◽  
Chee Kai Chua
Keyword(s):  
Energy Density ◽  
Complex Geometry ◽  
Electron Backscatter Diffraction ◽  
Grain Structure ◽  
Powder Bed Fusion ◽  
Research Attention ◽  
Fusion Technique ◽  
Content Type ◽  
Powder Bed ◽  
Manufacturing Techniques

Purpose In recent years, additive manufacturing techniques have attracted much research attention because of their ability to fabricate customised parts with complex geometry. The range of composites suitable for laser-based powder bed fusion technique is limited, and has not been investigated yet. This paper aims to study the fabrication of AlSi10Mg reinforced with nAl2O3 using the laser-based powder bed fusion technique. Design/methodology/approach An experimental approach was used to investigate the densification of AlSi10Mg–nAl2O3 composites using laser-based powder bed fusion technique. Optimisation of the porosity was performed, and microstructure evolution was evaluated. Findings In this study, laser volumetric energy density (approximately 109 J/mm3) was found to be required for the fabrication of AlSi10Mg–nAl2O3 composites with a relative volumetric density approximating 99%. The use of laser volumetric energy density resulted in larger grains. Columnar grain structure was observed via the use of electron backscatter diffraction mapping. Originality/value This paper examines the processing of new aluminium composite material suitable for the fabrication via the laser-based powder bed fusion technique.

scholarly journals Hybrid additive manufacturing of steels and alloys

2020 ◽  
Vol 7 ◽  
pp. 6
Author(s):  
Vladimir V. Popov ◽  
Alexander Fleisher
Keyword(s):  
Additive Manufacturing ◽  
Energy Deposition ◽  
Modern Trend ◽  
Production Chain ◽  
Direct Energy Deposition ◽  
Powder Bed ◽  
Direct Energy ◽  
Manufacturing Techniques ◽  
Traditional Manufacturing

Hybrid additive manufacturing is a relatively modern trend in the integration of different additive manufacturing techniques in the traditional manufacturing production chain. Here the AM-technique is used for producing a part on another substrate part, that is manufactured by traditional manufacturing like casting or milling. Such beneficial combination of additive and traditional manufacturing helps to overcome well-known issues, like limited maximum build size, low production rate, insufficient accuracy, and surface roughness. The current paper is devoted to the classification of different approaches in the hybrid additive manufacturing of steel components. Additional discussion is related to the benefits of Powder Bed Fusion (PBF) and Direct Energy Deposition (DED) approaches for hybrid additive manufacturing of steel components.

Models partition for 3D printing objects using skeleton

2017 ◽  
Vol 23 (1) ◽  
pp. 54-64 ◽  
Author(s):  
Xiaotong Jiang ◽  
Xiaosheng Cheng ◽  
Qingjin Peng ◽  
Luming Liang ◽  
Ning Dai ◽  
...  
Keyword(s):  
3D Model ◽  
Three Dimensional ◽  
Principal Component ◽  
3D Models ◽  
Sweep Method ◽  
Final Model ◽  
Content Type ◽  
Working Volume ◽  
Minima Rule ◽  
The Greedy Algorithm

Purpose It is a challenge to print a model with the size that is larger than the working volume of a three-dimensional (3D) printer. The purpose of this paper is to present a feasible approach to divide a large model into small printing parts to fit the volume of a printer and then assemble these parts into the final model. Design/methodology/approach The proposed approach is based on the skeletonization and the minima rule. The skeleton of a printing model is first extracted using the mesh contraction and the principal component analysis. The 3D model is then partitioned preliminarily into many smaller parts using the space sweep method and the minima rule. The preliminary partition is finally optimized using the greedy algorithm. Findings The skeleton of a 3D model can effectively represent a simplified version of the geometry of the 3D model. Using a model’s skeleton to partition the model is an efficient way. As it is generally desirable to have segmentations at concave creases and seams, the cutting position should be located in the concave region. The proposed approach can partition large models effectively to well retain the integrity of meaningful parts. Originality/value The proposed approach is new in the rapid prototyping field using the model skeletonization and the minima rule. Based on the authors’ knowledge, there is no method that concerns the integrity of meaningful parts for partitioning. The proposed method can achieve satisfactory results by the integrity of meaningful parts and assemblability for most 3D models.

Labelling additively manufactured parts by microstructural gradation – advanced copy-proof design

2016 ◽  
Vol 22 (4) ◽  
pp. 630-635 ◽  
Author(s):  
Thomas Niendorf ◽  
Florian Brenne ◽  
Mirko Schaper ◽  
Andre Riemer ◽  
Stefan Leuders ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Additive Manufacturing ◽  
Eddy Current ◽  
Computer Aided Design ◽  
Current Method ◽  
Eddy Current Method ◽  
Content Type ◽  
Current Technique ◽  
Manufacturing Techniques ◽  
Electro Magnetic

Purpose As additive manufacturing techniques, such as selective laser melting, allow for straightforward production of parts on basis of simple computer-aided design files only, unauthorized replication can be facilitated. Thus, identification and tracking of individual parts are increasingly vital in light of globalized competition. This paper aims to overcome the susceptibility of additive manufacturing techniques for product piracy by establishing a method for introducing and reading out product identification markers not visible by naked-eye inspection. Design/methodology/approach Lasers of different nominal power were used for altering the solidification mechanisms during processing in distinct areas of the samples. The resulting local microstructural characteristics and mechanical properties, respectively, were determined by scanning electron microscopy and hardness measurements. The applicability of an advanced eddy current technique for reading out local differences in electro-magnetic properties was examined. Findings The findings show that distinct microstructural features are obtained in dependence of the locally applied laser power. These features manifest themselves not only in terms of grain morphology, texture and hardness but also induce changes in the local electro-magnetic properties. The inscribed pattern can be non-destructively visualized by using an advanced eddy current technique. Originality/value Conventional copy protection basically consists in supplementary labelling or surface modification. In the present study, a new method is proposed for additively manufactured parts, overcoming the drawbacks of the former methods through process-induced microstructure manipulation. Slight alterations in the electro-magnetic material properties can be detected by advanced eddy current method allowing for identification of arbitrary and inimitable component information in additively manufactured parts.

scholarly journals Laser powder bed fusion additive manufacturing of copper wicking structures: fabrication and capillary characterization

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Adnen Mezghani ◽  
Abdalla R. Nassar ◽  
Corey J. Dickman ◽  
Eduardo Valdes ◽  
Raul Alvarado
Keyword(s):  
Additive Manufacturing ◽  
Design Methodology ◽  
Heat Pipes ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Content Type ◽  
Powder Bed ◽  
Published Report ◽  
Secondary Manufacturing ◽  
Design Freedom

Purpose An integral component in heat pipes (HPs) and vapor chambers (VCs) is a porous wicking structure. Traditional methods for manufacturing wicking structures within HPs and VCs involve secondary manufacturing processes and are generally limited to simple geometries. This work aims to leverage the unprecedented level of design freedom of laser powder bed fusion (LPBF) additive manufacturing (AM) to produce integrated wicking structures for HPs and VCs. Design/methodology/approach Copper wicking structures are fabricated through LPBF via partial sintering and via the formation of square, hexagonal and rectangular arrangements of micro-pins and micro-grooves, produced in multiple build directions. Wicks are characterized by conducting capillary performance analysis through the measurement of porosity, permeability and capillary rate-of-rise. Findings Copper wicking structures were successfully fabricated with capillary performance, K/reff, ranging from 0.186–1.74 µm. The rectangular-arrangement micro-pin wick presented the highest performance. Originality/value This work represents the first published report on LPBF AM of copper wicking structures for HPs/VCs applications and represents foundational knowledge for fabricating complete assemblies of copper VCs and HPs through LPBF AM.

Sign in / Sign up

Export Citation Format

Share Document