A review of 3D concrete printing systems and materials properties: current status and future research prospects

2018 ◽  
Vol 24 (4) ◽  
pp. 784-798 ◽  
Author(s):  
Suvash Chandra Paul ◽  
Gideon P.A.G. van Zijl ◽  
Ming Jen Tan ◽  
Ian Gibson
Keyword(s):  
Three Dimensional ◽  
Current Status ◽  
Future Research ◽  
Structural Elements ◽  
Construction Time ◽  
Content Type ◽  
Three Dimensional Printing ◽  
Materials Research ◽  
Printing System ◽  
Dimensional Printing

Purpose Three-dimensional printing of concrete (3DPC) has a potential for the rapid industrialization of the housing sector, with benefits of reduced construction time due to no formwork requirement, ease of construction of complex geometries, potential high construction quality and reduced waste. Required materials adaption for 3DPC is within reach, as concrete materials technology has reached the point where performance-based specification is possible by specialists. This paper aims to present an overview of the current status of 3DPC for construction, including existing printing methods and material properties required for robustness of 3DPC structures or structural elements. Design/methodology/approach This paper has presented an overview of three categories of 3DPC systems, namely, gantry, robotic and crane systems. Material compositions as well as fresh and hardened properties of mixes currently used for 3DPC have been elaborated. Findings This paper presents an overview of the state of the art of 3DPC systems and materials. Research needs, including reinforcement in the form of bars or fibres in the 3D printable cement-based materials, are also addressed. Originality/value The critical analysis of the 3D concrete printing system and materials described in this review paper is original.

Applications of 3D printing in critical care medicine: A scoping review

2021 ◽  
pp. 0310057X2097665
Author(s):  
Natasha Abeysekera ◽  
Kirsty A Whitmore ◽  
Ashvini Abeysekera ◽  
George Pang ◽  
Kevin B Laupland
Keyword(s):  
Critical Care ◽  
Scoping Review ◽  
A Priori ◽  
Three Dimensional ◽  
Critical Care Medicine ◽  
Future Research ◽  
Care Practice ◽  
Three Dimensional Printing ◽  
Wide Range ◽  
Dimensional Printing

Although a wide range of medical applications for three-dimensional printing technology have been recognised, little has been described about its utility in critical care medicine. The aim of this review was to identify three-dimensional printing applications related to critical care practice. A scoping review of the literature was conducted via a systematic search of three databases. A priori specified themes included airway management, procedural support, and simulation and medical education. The search identified 1544 articles, of which 65 were included. Ranging across many applications, most were published since 2016 in non – critical care discipline-specific journals. Most studies related to the application of three-dimensional printed models of simulation and reported good fidelity; however, several studies reported that the models poorly represented human tissue characteristics. Randomised controlled trials found some models were equivalent to commercial airway-related skills trainers. Several studies relating to the use of three-dimensional printing model simulations for spinal and neuraxial procedures reported a high degree of realism, including ultrasonography applications three-dimensional printing technologies. This scoping review identified several novel applications for three-dimensional printing in critical care medicine. Three-dimensional printing technologies have been under-utilised in critical care and provide opportunities for future research.

A three-dimensional shoulder protector based on ergonomics for workers

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ran-i Eom ◽  
Yejin Lee
Keyword(s):  
Body Shape ◽  
Three Dimensional ◽  
Health And Safety ◽  
The Body ◽  
Construction Sites ◽  
Content Type ◽  
Three Dimensional Printing ◽  
Functional Studies ◽  
Work Posture ◽  
Dimensional Printing

PurposeThe use of shoulder protectors is strongly recommended when carrying objects on the shoulder to ensure the health and safety of workers. Thus, this study aimed to develop and verify an ergonomic shoulder protector that considers human body shape and carrying posture from an ergonomic perspective. Ultimately, this study will present a shoulder protector with enhanced fit and safety for carrying workers at construction sites.Design/methodology/approachThe shoulder protector was designed and printed using three-dimensional printing technology with variable side neck points and shoulder point heights to reflect the human body's shoulder line shape and to position the carried object stably on the shoulder. The developed shoulder protectors were evaluated in terms of their fit according to the work posture of the carrier, adherence upon motion and durability through structural analysis.FindingsThe design of the shoulder protector for carrying workers followed the shoulder line. It is best placed above the side neck point by 1.0 cm and above the shoulder point by 2.0 cm. Its length is slightly shorter than the human shoulder for superior fit and safety.Originality/valueThe final shoulder protector (FSP) for carrying workers reflects the body curvature while enhancing fit and safety by considering activity and protective factors. As functional studies and evaluations on the need for protectors are scarce, this study provides fundamental data in the evaluation of protective gears.

Rapid manufacturing of copper-graphene composites using a novel rapid tooling technique

2020 ◽  
Vol 26 (4) ◽  
pp. 765-776 ◽  
Author(s):  
Gurminder Singh ◽  
Pulak Mohan Pandey
Keyword(s):  
Electrical Conductivity ◽  
Electrical Properties ◽  
Wear Rate ◽  
Coefficient Of Friction ◽  
Rate Coefficient ◽  
Three Dimensional ◽  
Rapid Tooling ◽  
Content Type ◽  
Three Dimensional Printing ◽  
Dimensional Printing

Purpose The purpose of this study is to study the mechanical, tribological and electrical properties of the copper-graphene (Cu-Gn) composites fabricated by a novel rapid tooling technique consist of three-dimensional printing and ultrasonic-assisted pressureless sintering (UAPS). Design/methodology/approach Four different Cu-Gn compositions with 0.25, 0.5, 1 and 1.5 per cent of graphene were fabricated using an amalgamation of three-dimensional printing and UAPS. The polymer 3d printed parts were used to prepare mould cavity and later the UAPS process was used to sinter Cu-Gn powder to acquire free-form shape. The density, hardness, wear rate, coefficient of friction and electrical conductivity were evaluated for the different compositions of graphene and compared with the pure copper. Besides, the comparison was performed with the conventional method. Findings Cu-Gn composites revealed excellent wear properties due to higher hardness, and the lubrication provided by the graphene. The electrical conductivity of the fabricated Cu-Gn composites started increasing initially but decreased afterwards with increasing the content of graphene. The UAPS fabricated composites outperformed the conventional method manufactured samples with better properties such as density, hardness, wear rate, coefficient of friction and electrical conductivity due to homogeneous mixing of metal particles and graphene. Originality/value The fabrication of Cu-Gn composite freeform shapes was found to be difficult using conventional methods. The novel technique using a combination of polymer three-dimensional printing and UAPS as rapid tooling was introduced for the fabrication of freeform shapes of Cu-Gn composites and mechanical, tribological and electrical properties were studied. The method can be used to fabricate optimized complex Cu-Gn structures with improved wear and electrical applications.

scholarly journals Main Clinical Use of Additive Manufacturing (Three-Dimensional Printing) in Finland Restricted to the Head and Neck Area in 2016–2017

2019 ◽  
Vol 109 (2) ◽  
pp. 166-173 ◽  
Author(s):  
A.B.V. Pettersson ◽  
M. Salmi ◽  
P. Vallittu ◽  
W. Serlo ◽  
J. Tuomi ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Computer Aided Design ◽  
Three Dimensional ◽  
Patient Specific ◽  
Future Research ◽  
Imaging Data ◽  
University Hospitals ◽  
Three Dimensional Printing ◽  
Dimensional Printing ◽  
Head Area

Background and Aims: Additive manufacturing or three-dimensional printing is a novel production methodology for producing patient-specific models, medical aids, tools, and implants. However, the clinical impact of this technology is unknown. In this study, we sought to characterize the clinical adoption of medical additive manufacturing in Finland in 2016–2017. We focused on non-dental usage at university hospitals. Materials and Methods: A questionnaire containing five questions was sent by email to all operative, radiologic, and oncologic departments of all university hospitals in Finland. Respondents who reported extensive use of medical additive manufacturing were contacted with additional, personalized questions. Results: Of the 115 questionnaires sent, 58 received answers. Of the responders, 41% identified as non-users, including all general/gastrointestinal (GI) and vascular surgeons, urologists, and gynecologists; 23% identified as experimenters or previous users; and 36% identified as heavy users. Usage was concentrated around the head area by various specialties (neurosurgical, craniomaxillofacial, ear, nose and throat diseases (ENT), plastic surgery). Applications included repair of cranial vault defects and malformations, surgical oncology, trauma, and cleft palate reconstruction. Some routine usage was also reported in orthopedics. In addition to these patient-specific uses, we identified several off-the-shelf medical components that were produced by additive manufacturing, while some important patient-specific components were produced by traditional methodologies such as milling. Conclusion: During 2016–2017, medical additive manufacturing in Finland was routinely used at university hospitals for several applications in the head area. Outside of this area, usage was much less common. Future research should include all patient-specific products created by a computer-aided design/manufacture workflow from imaging data, instead of concentrating on the production methodology.

scholarly journals Three-Dimensional Printing Strategies for Irregularly Shaped Cartilage Tissue Engineering: Current State and Challenges

2022 ◽  
Vol 9 ◽  
Author(s):  
Hui Wang ◽  
Zhonghan Wang ◽  
He Liu ◽  
Jiaqi Liu ◽  
Ronghang Li ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Cartilage Tissue Engineering ◽  
Three Dimensional ◽  
Cartilage Tissue ◽  
Future Research ◽  
Engineering Construction ◽  
Three Dimensional Printing ◽  
Current State ◽  
Dimensional Printing

Although there have been remarkable advances in cartilage tissue engineering, construction of irregularly shaped cartilage, including auricular, nasal, tracheal, and meniscus cartilages, remains challenging because of the difficulty in reproducing its precise structure and specific function. Among the advanced fabrication methods, three-dimensional (3D) printing technology offers great potential for achieving shape imitation and bionic performance in cartilage tissue engineering. This review discusses requirements for 3D printing of various irregularly shaped cartilage tissues, as well as selection of appropriate printing materials and seed cells. Current advances in 3D printing of irregularly shaped cartilage are also highlighted. Finally, developments in various types of cartilage tissue are described. This review is intended to provide guidance for future research in tissue engineering of irregularly shaped cartilage.

scholarly journals Remanufacturing of end-of-life glass-fiber reinforced composites via UV-assisted 3D printing

2019 ◽  
Vol 26 (6) ◽  
pp. 981-992
Author(s):  
Andrea Mantelli ◽  
Marinella Levi ◽  
Stefano Turri ◽  
Raffaella Suriano
Keyword(s):  
Mechanical Properties ◽  
Circular Economy ◽  
Three Dimensional ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Content Type ◽  
Three Dimensional Printing ◽  
Glass Fiber Reinforced ◽  
Complex Shapes ◽  
Dimensional Printing

Purpose The purpose of this study is to demonstrate the potential of three-dimensional printing technology for the remanufacturing of end-of-life (EoL) composites. This technology will enable the rapid fabrication of environmentally sustainable structures with complex shapes and good mechanical properties. These three-dimensional printed objects will have several application fields, such as street furniture and urban renewal, thus promoting a circular economy model. Design/methodology/approach For this purpose, a low-cost liquid deposition modeling technology was used to extrude photo-curable and thermally curable composite inks, composed of an acrylate-based resin loaded with different amounts of mechanically recycled glass fiber reinforced composites (GFRCs). Rheological properties of the extruded inks and their printability window and the conversion of cured composites after an ultraviolet light (UV) assisted extrusion were investigated. In addition, tensile properties of composites remanufactured by this UV-assisted technology were studied. Findings A printability window was found for the three-dimensional printable GFRCs inks. The formulation of the composite printable inks was optimized to obtain high quality printed objects with a high content of recycled GFRCs. Tensile tests also showed promising mechanical properties for printed GFRCs obtained with this approach. Originality/value The novelty of this paper consists in the remanufacturing of GFRCs by the three-dimensional printing technology to promote the implementation of a circular economy. This study shows the feasibility of this approach, using mechanically recycled EoL GFRCs, composed of a thermoset polymer matrix, which cannot be melted as in case of thermoplastic-based composites. Objects with complex shapes were three-dimensional printed and presented here as a proof-of-concept.

Alignment Algorithm for Nano-scale Three-dimensional Printing System

2014 ◽  
Vol 31 (12) ◽  
pp. 1101-1106 ◽  
Author(s):  
Ki-Hwan Jang ◽  
Hyun-Taek Lee ◽  
Chung-Soo Kim ◽  
Won-Shik Chu ◽  
Sung-Hoon Ahn
Keyword(s):  
Three Dimensional ◽  
Alignment Algorithm ◽  
Three Dimensional Printing ◽  
Nano Scale ◽  
Printing System ◽  
Dimensional Printing

Development of 3D printing sustainable mortars based on a bibliometric analysis

2021 ◽  
pp. 146442072199521
Author(s):  
J Teixeira ◽  
CO Schaefer ◽  
B Rangel ◽  
J Lino Alves ◽  
L Maia ◽  
...  
Keyword(s):  
Portland Cement ◽  
Construction Industry ◽  
Bibliometric Analysis ◽  
Ecological Footprint ◽  
Cement Content ◽  
Three Dimensional ◽  
Construction Time ◽  
Three Dimensional Printing ◽  
Material Deposition ◽  
Dimensional Printing

In construction, three-dimensional concrete printing technology is an innovative method that opens new design possibilities, reducing the construction time process. The incremental material deposition allows organic shapes without formwork, a mandatory constraint in preparatory phases of conventional complex concrete structures. Nowadays, in three-dimensional printing for construction industry, concrete is the most used material due to its workability, extrudability, and pumpability properties favorable for the printing conditions. Hence, this composition still has a poor sustainable efficiency due to the high levels of Portland Cement. In this research, a reduction of this material was studied and experimented searching for a mortar composition with better ecological footprint, with the objective of decreasing the CO2 emissions. A bibliometric analysis was made to study the constituents of a mortar for three-dimensional printing and respective dosage. The knowledge acquired in the analysis of the compositions contributed to the development of mortars with lower Portland Cement content. A mechanical extruder was used to check the extrusion capacity of the developed mortars, and the best compositions are presented.

Sign in / Sign up

Export Citation Format

Share Document