Adaptation of CAD-system Creo for Development of Individual Spinal Implant

2021 ◽  
Author(s):  
Olga Gladkova ◽  
Anzhelika Parkhomenko ◽  
Nadiia Myronenko ◽  
Andriy Parkhomenko ◽  
Yaroslav Zalyubovskiy ◽  
...  
Keyword(s):  
Spinal Implant ◽  
Cad System

Analysing Mechanical Systems in Domestic and Foreign CAD Systems

2018 ◽  
pp. 10-17
Author(s):  
V. A. Martynyuk ◽  
V. A. Trudonoshin ◽  
V. G. Fedoruk
Keyword(s):  
Sheet Material ◽  
The Finite Element Method ◽  
Cad Systems ◽  
Cad System ◽  
Software Products ◽  
Foreign Products ◽  
Nonlinear Algebraic Systems ◽  
Software Product ◽  
Pipeline Design ◽  
The Mathematical Model

The article considers applications of foreign CAD-systems in creating the challenging projects at domestic enterprises and design bureaus. As stated in the article "... presently, there is no domestic CAD-system that could completely replace such foreign products as NX, CATIA, Credo". Besides, due to international cooperation in creating the challenging projects (for example, the project to create a modern wide-body aircraft, proposed jointly with China), it makes sense to use the worldwide known and popular CAD systems (the aforementioned NX, CATIA, Credo). Therefore, in the foreseeable future, we will still have to use foreign software products. Of course, there always remains a question of the reliability of the results obtained. Actually, this question is always open regardless of what software product is used - domestic or foreign. This question has been haunting both developers and users of CAD systems for the last 30 to 40 years. But with using domestic systems, it is much easier to identify the cause of inaccurate results and correct the mathematical models used, the methods of numerical integration applied, and the solution of systems of nonlinear algebraic systems. Everything is much more complicated if we use a foreign software product. All advertising conversations that there is a tool to make the detected errors available to the developers, remain only conversations in the real world. It is easily understandable to domestic users, and, especially, to domestic developers of similar software products. The existing development rates and competition for potential buyers dictate a rigid framework of deadlines for releasing all new versions of the product and introducing the latest developments into commercial product, etc. As a result, the known errors migrate from version to version, and many users have accepted it long ago. Especially, this concerns the less popular tools rather than the most popular applications (modules) of a CAD system. For example, in CAD systems, the "Modeling" module where geometric models of designed parts and assembly units are created has been repeatedly crosschecked. But most of the errors are hidden in applications related to the design of parts from sheet material and to the pipeline design, as well as in applications related to the analysis of moving mechanisms and to the strength or gas dynamic analysis by the finite element method.The article gives a concrete example of a moving mechanism in the analysis of which an error was detected using the mathematical model of external influence (a source of speed) in the NX 10.0 system of Siemens.

Reliability-Driven CAD System for Deep-Submicron VLSI Circuits

1998 ◽  
Author(s):  
S. M. Kang ◽  
E. Rosenbaum ◽  
Y. K. Cheng ◽  
L. P. Yuan ◽  
T. Li
Keyword(s):  
Deep Submicron ◽  
Vlsi Circuits ◽  
Cad System

Breast Cancer Image Classification: A Review

2020 ◽  
Vol 16 ◽  
Author(s):  
Pooja Pathak ◽  
Anand Singh Jalal ◽  
Ritu Rai
Keyword(s):  
Breast Cancer ◽  
Early Detection ◽  
Treatment Options ◽  
Breast Cancer Diagnosis ◽  
Conventional Approach ◽  
Learning Networks ◽  
Cad System ◽  
Ultrasound Computed Tomography ◽  
Core Concepts ◽  
Magnetic Resonance Imaging Mri

Background: Breast cancer represents uncontrolled breast cell growth. Breast cancer is the most diagnosed cancer in women worldwide. Early detection of breast cancer improves the chances of survival and increases treatment options. There are various methods for screening breast cancer such as mammogram, ultrasound, computed tomography, Magnetic Resonance Imaging (MRI). MRI is gaining prominence as an alternative screening tool for early detection and breast cancer diagnosis. Nevertheless, MRI can hardly be examined without the use of a Computer-Aided Diagnosis (CAD) framework, due to the vast amount of data. Objective: This paper aims to cover the approaches used in CAD system for the detection of breast cancer. Method: In this paper, the methods used in CAD systems are categories in two classes: the conventional approach and artificial intelligence (AI) approach. The conventional approach covers the basic steps of image processing such as preprocessing, segmentation, feature extraction and classification. The AI approach covers the various convolutional and deep learning networks used for diagnosis. Conclusion: This review discusses some of the core concepts used in breast cancer and presents a comprehensive review of efforts in the past to address this problem.

Review of Various Tasks Performed in the Preprocessing Phase of a Diabetic Retinopathy Diagnosis System

2020 ◽  
Vol 16 (4) ◽  
pp. 397-426
Author(s):  
Muhammad Nadeem Ashraf ◽  
Muhammad Hussain ◽  
Zulfiqar Habib
Keyword(s):  
Diabetic Retinopathy ◽  
Blood Vessels ◽  
Early Stage ◽  
Spherical Shape ◽  
Cost Effective ◽  
Lesion Detection ◽  
Diabetic Patients ◽  
Cad System ◽  
Non Invasive ◽  
Optic Discs

Diabetic Retinopathy (DR) is a major cause of blindness in diabetic patients. The increasing population of diabetic patients and difficulty to diagnose it at an early stage are limiting the screening capabilities of manual diagnosis by ophthalmologists. Color fundus images are widely used to detect DR lesions due to their comfortable, cost-effective and non-invasive acquisition procedure. Computer Aided Diagnosis (CAD) of DR based on these images can assist ophthalmologists and help in saving many sight years of diabetic patients. In a CAD system, preprocessing is a crucial phase, which significantly affects its performance. Commonly used preprocessing operations are the enhancement of poor contrast, balancing the illumination imbalance due to the spherical shape of a retina, noise reduction, image resizing to support multi-resolution, color normalization, extraction of a field of view (FOV), etc. Also, the presence of blood vessels and optic discs makes the lesion detection more challenging because these two artifacts exhibit specific attributes, which are similar to those of DR lesions. Preprocessing operations can be broadly divided into three categories: 1) fixing the native defects, 2) segmentation of blood vessels, and 3) localization and segmentation of optic discs. This paper presents a review of the state-of-the-art preprocessing techniques related to three categories of operations, highlighting their significant aspects and limitations. The survey is concluded with the most effective preprocessing methods, which have been shown to improve the accuracy and efficiency of the CAD systems.

scholarly journals Accuracy of New Deep Learning Model-Based Segmentation and Key-Point Multi-Detection Method for Ultrasonographic Developmental Dysplasia of the Hip (DDH) Screening

Diagnostics ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1174
Author(s):  
Si-Wook Lee ◽  
Hee-Uk Ye ◽  
Kyung-Jae Lee ◽  
Woo-Young Jang ◽  
Jong-Ha Lee ◽  
...  
Keyword(s):  
Deep Learning ◽  
Intraclass Correlation ◽  
Alpha Angle ◽  
Learning Model ◽  
Developmental Dysplasia ◽  
Human Observer ◽  
Intraobserver Variability ◽  
Cad System ◽  
Deep Learning Model ◽  
Dysplasia Of The Hip

Hip joint ultrasonographic (US) imaging is the golden standard for developmental dysplasia of the hip (DDH) screening. However, the effectiveness of this technique is subject to interoperator and intraobserver variability. Thus, a multi-detection deep learning artificial intelligence (AI)-based computer-aided diagnosis (CAD) system was developed and evaluated. The deep learning model used a two-stage training process to segment the four key anatomical structures and extract their respective key points. In addition, the check angle of the ilium body balancing level was set to evaluate the system’s cognitive ability. Hence, only images with visible key anatomical points and a check angle within ±5° were used in the analysis. Of the original 921 images, 320 (34.7%) were deemed appropriate for screening by both the system and human observer. Moderate agreement (80.9%) was seen in the check angles of the appropriate group (Cohen’s κ = 0.525). Similarly, there was excellent agreement in the intraclass correlation coefficient (ICC) value between the measurers of the alpha angle (ICC = 0.764) and a good agreement in beta angle (ICC = 0.743). The developed system performed similarly to experienced medical experts; thus, it could further aid the effectiveness and speed of DDH diagnosis.

A student oriented CAD system in APL

1987 ◽  
Vol 11 (4) ◽  
pp. 483-495
Author(s):  
Uday G. Gujar ◽  
Joseph W.P. So
Keyword(s):  
Cad System

A multiparametric MRI-based CAD system for accurate diagnosis of bladder cancer staging

2021 ◽  
Vol 90 ◽  
pp. 101911
Author(s):  
K. Hammouda ◽  
F. Khalifa ◽  
A. Soliman ◽  
M. Ghazal ◽  
M. Abou El-Ghar ◽  
...  
Keyword(s):  
Bladder Cancer ◽  
Cancer Staging ◽  
Multiparametric Mri ◽  
Accurate Diagnosis ◽  
Cad System ◽  
Bladder Cancer Staging

scholarly journals Method for assessment of matching of total ankle joint endoprostheses based on CT data

2020 ◽  
Vol 6 (3) ◽  
pp. 396-397
Author(s):  
Heiner Martin ◽  
Josephine Wittmüß ◽  
Thomas Mittlmeier ◽  
Niels Grabow
Keyword(s):  
Cross Sections ◽  
Spline Functions ◽  
Moments Of Inertia ◽  
Cad System ◽  
Principal Moments Of Inertia ◽  
Principal Axes ◽  
Ct Data ◽  
The One ◽  
Relative Differences ◽  
Systemic Design

AbstractThe investigation of matching of endoprosthesis tibial components to the bone cross section is of interest for the manufacturer as well as for the surgeon. On the one hand, a systemic design of the prosthesis and the assortment is possible, on the other hand, a better matching implantation is enabled on the basis of experience of this study. CT sections were segmented manually using a CAD system and fitted by spline functions, then superseded with cross sections of the tibial component of a modified Hintermann H3 prosthesis. The principal moments of inertia, the direction of the principal axes and the area of the section were evaluated. Based on the relative differences of the principal moments of inertia, recommendations for application of the different prosthesis size and its selection with the surgery can be made.

Sign in / Sign up

Export Citation Format

Share Document