Analysing Mechanical Systems in Domestic and Foreign CAD Systems

2018 ◽  
pp. 10-17
Author(s):  
V. A. Martynyuk ◽  
V. A. Trudonoshin ◽  
V. G. Fedoruk
Keyword(s):  
Sheet Material ◽  
The Finite Element Method ◽  
Cad Systems ◽  
Cad System ◽  
Software Products ◽  
Foreign Products ◽  
Nonlinear Algebraic Systems ◽  
Software Product ◽  
Pipeline Design ◽  
The Mathematical Model

The article considers applications of foreign CAD-systems in creating the challenging projects at domestic enterprises and design bureaus. As stated in the article "... presently, there is no domestic CAD-system that could completely replace such foreign products as NX, CATIA, Credo". Besides, due to international cooperation in creating the challenging projects (for example, the project to create a modern wide-body aircraft, proposed jointly with China), it makes sense to use the worldwide known and popular CAD systems (the aforementioned NX, CATIA, Credo). Therefore, in the foreseeable future, we will still have to use foreign software products. Of course, there always remains a question of the reliability of the results obtained. Actually, this question is always open regardless of what software product is used - domestic or foreign. This question has been haunting both developers and users of CAD systems for the last 30 to 40 years. But with using domestic systems, it is much easier to identify the cause of inaccurate results and correct the mathematical models used, the methods of numerical integration applied, and the solution of systems of nonlinear algebraic systems. Everything is much more complicated if we use a foreign software product. All advertising conversations that there is a tool to make the detected errors available to the developers, remain only conversations in the real world. It is easily understandable to domestic users, and, especially, to domestic developers of similar software products. The existing development rates and competition for potential buyers dictate a rigid framework of deadlines for releasing all new versions of the product and introducing the latest developments into commercial product, etc. As a result, the known errors migrate from version to version, and many users have accepted it long ago. Especially, this concerns the less popular tools rather than the most popular applications (modules) of a CAD system. For example, in CAD systems, the "Modeling" module where geometric models of designed parts and assembly units are created has been repeatedly crosschecked. But most of the errors are hidden in applications related to the design of parts from sheet material and to the pipeline design, as well as in applications related to the analysis of moving mechanisms and to the strength or gas dynamic analysis by the finite element method.The article gives a concrete example of a moving mechanism in the analysis of which an error was detected using the mathematical model of external influence (a source of speed) in the NX 10.0 system of Siemens.

Digital education: Using electronic resources in psychological support of the educational process

2020 ◽  
pp. 55-61
Author(s):  
Ju. A. Tikhonova
Keyword(s):  
Preschool Education ◽  
Educational Process ◽  
Psychological Support ◽  
Diagnostic Methods ◽  
Practical Application ◽  
Software Products ◽  
School Year ◽  
Psychological Service ◽  
Software Product ◽  
The City

The article discusses the development trends of the modern preschool education system in the aspect of the activity of the teacherpsychologist of the preschool educational organization. The experience of using 1C software products in the practical work of the psychological service of kindergarten 318 of the city of Perm in the aspects of psychological monitoring of children’s readiness to study at school and correctional and developmental work with preschool children is presented. The components of the child’s psychological readiness for school are described. On practical examples, diagnostic methods for determining the level of readiness of children for schooling are analyzed. The data of testing kindergarten pupils at the beginning of the 2019/2020 school year on the parameters allowing to identify urgent problems and determine the direction of the necessary correctional development work are presented. Features of the practical application of the software product 1C:Preschool Psychodiagnostics in the process of psychological support of preparing children for school are considered. Methods are described, the scope of which is aimed not only at the study of personality traits, but also at its development. The possibilities of using games of the 1C:Educational Collection in the correctional and developmental work are disclosed. The description of game collections is given, options for their use are presented.

THEORETICAL PRINCIPLES OF FORECASTING THE COST OF A SOFTWARE PRODUCT

2017 ◽  
Author(s):  
Pavlo Rodionov ◽  
◽  
Anna Ploskonos ◽  
Lesya Gavrutenko ◽  
◽  
...  
Keyword(s):  
Selection Process ◽  
Individual Characteristics ◽  
Successful Implementation ◽  
Software Products ◽  
Software Product ◽  
Continue Research ◽  
Cocomo Model ◽  
Factors Of Influence ◽  
The Individual ◽  
The Cost

The paper analyzes the factors that affect the amount of effort required to create a mobile application and its cost. It is established that the main factors of influence are the design of the application, its functionality, the type of mobile platform, the availability and level of testing and support, as well as the individual characteristics of the developer. Based on the analysis of information sources, the main methods and approaches to forecasting the cost of software products are identified, which include the COCOMO model, Price-to-win method, expert evaluation, algorithmic methods and the method of analogies. It is proposed to consider the method of analogies as a tool that allows you to make predictions about the cost of resources required for the successful implementation of IT projects based on the experience of similar projects. It is proved that the advantages of this method are the simplicity of its implementation and the clarity of the results obtained, which follows from the practical orientation of this tool. Among the limitations of the method of analogy is the mandatory need for reliable data relating to similar projects, as well as the difficulty of taking into account unspecified indicators. Taking into account the mentioned limitations of the method of analogies and on the basis of the analysis of scientific sources the possible directions of its optimization are determined. Thus, among the ways to improve the effectiveness of this method are those aimed at optimizing the project selection process, the data for which are used as a basis for forecasting. Attempts to improve the method of analogies by including parameters that were previously ignored by this technique seem promising. This in turn can lead to an expansion of the scope of the method of analogies and increase the accuracy of forecasts. As prospects for further research, the need to continue research in the field of optimization of the method of analogies with the subsequent practical verification of theoretical positions on the data of real projects.

PROBLEMATIC ISSUES OF THE GEOGRAPHIC INFORMATION SYSTEMS USE IN SOCIO-HYGIENIC MONITORING AND RISK-BASED SUPERVISION

2019 ◽  
pp. 31-36 ◽  
Author(s):  
Е.М. Studenikina ◽  
Yu.I. Stepkin ◽  
O.V. Klepikov ◽  
I.V. Kolnet ◽  
L.V. Popova
Keyword(s):  
Information Systems ◽  
Technology Implementation ◽  
Geographical Information Systems ◽  
Geographical Information ◽  
Electronic Library ◽  
Information Portal ◽  
Software Products ◽  
Stage Of Development ◽  
Software Product ◽  
Information Systems Use

The paper considers the problematic issues of the geographical information systems (GIS) use in the sociohygienic monitoring (SHM). We analyzed scientific and practical publications on this subject that are freely available on the largest Russian information portal of scientific electronic library eLIBRARY.RU during 2014- 2018, which allowed us to formulate the principles of organization and requirements for effective operation of geographic and information systems in the socio-hygienic monitoring. An analysis of the implementation of these principles at the present stage of development for the socio-hygienic monitoring system is presented, the results of which were used in formulating priority tasks in the area of geographic and information technology implementation into socio-hygienic monitoring and risk-based planning of control and supervisory measures: to determine the necessary level of detail and an information list depicted on electronic maps for the implementation of risk-based control planning; to provide organizational and regulatory and methodological support for the hierarchical principle of GIS within Rospotrebnadzor operating on a single software product of domestic developers for organizations and institutions; to work out the need to combine GIS with similar systems of other departments involved in the data collection of social and hygienic monitoring (Rosstat, Roshydromet, Rosprirodnadzor, Ministry of Health, etc.) to enable automated data export and import; to solve staffing issues to ensure customization and subsequent GIS operation; to provide budget funding for the purchase of licensed software products for GIS in SHM, preferably of Russian developers.

Damping characteristics of a magneto-rheological damper with dual independent controllable ducts

2021 ◽  
pp. 1045389X2110188
Author(s):  
Jianqiang Yu ◽  
Xiaomin Dong ◽  
Tao Wang ◽  
Zhengmu Zhou ◽  
Yaqin Zhou
Keyword(s):  
Dynamic Range ◽  
Fluid Flows ◽  
Mr Damper ◽  
Viscous Damping ◽  
The Novel ◽  
The Finite Element Method ◽  
Damping Force ◽  
Damping Characteristics ◽  
Magneto Rheological ◽  
The Mathematical Model

This paper presents the damping characteristics of a linear magneto-rheological (MR) damper with dual controllable ducts based on numerical and experimental analysis. The novel MR damper consisting of a dual-rod cylinder system and a MR valve is used to reduce the influences of viscous damping force and improve dynamic range. Driven by the dual-rod cylinder system, MR fluid flows in the MR valve. The pressure drop of the MR valve with dual independent controllable ducts can be controlled by tuning the current of two independent coils. Based on the mathematical model and the finite element method, the damping characteristics of the MR damper is simulated. A prototype is designed and tested on MTS machine to evaluate its damping characteristics. The results show that the working states and damping force of the MR damper can be controlled by the two independent coils.

Knowledge-Based System for Supporting the Design of a Plate-Press

2012 ◽  
Vol 12 (2) ◽  
Author(s):  
David Potočnik ◽  
Miran Ulbin ◽  
Bojan Dolšak
Keyword(s):  
Material Selection ◽  
Compressive Load ◽  
The Finite Element Method ◽  
Design Quality ◽  
Suitable Material ◽  
Improve Design ◽  
Knowledge Based System ◽  
Cad System ◽  
Design Time ◽  
Knowledge Based

This paper presents a knowledge-based system capable of giving the designer quality support when making decisions from the aspect of modeling the reinforcement of a plate-press within a position of maximum compressive load, and by choosing suitable material for the plate. Based on the selected combination of reinforcement and material, this system acquaints the user with the size and position of the largest comparative stress, and the greatest nodal displacement in the load-direction. This system operates based on the implemented knowledge of experts in the execution of design, material selection, and numerical analysis based on the finite-element method (FEM), which was written with the help of parameters within the knowledge-base of the CATIA V5 CAD-system. Using this system gives the user an opportunity to reach conclusions that are crucial for designing a plate-press or pressure-loaded die-elements, in general. The results reveal that the system can dramatically shorten design time and improve design quality in comparison to manual design process.

Design of an Induction Glass Melting Furnace by Means of Mathematical Modelling Using the Finite Element Method

2007 ◽  
Vol 553 ◽  
pp. 124-129 ◽  
Author(s):  
Isaac Arellano ◽  
Gabriel Plascencia ◽  
Elías Carrillo ◽  
Miguel A. Barrón ◽  
Adolfo Sánchez ◽  
...  
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Glass Melting ◽  
Melting Furnace ◽  
The Finite Element Method ◽  
Glass Melting Furnace ◽  
High Frequencies ◽  
Harmful Emissions ◽  
The Mathematical Model ◽  
Element Method

In this paper we propose the design of a novel induction furnace for glass melting. The design is based on a mathematical analysis and performed numerically by means of the Finite Element Method. Several induction coils configurations were tested. The results from the mathematical model show that it is possible to melt glass in a furnace whose hearth is no larger than half a metre by using axial induction coils and high frequencies. This furnace configuration may result in increased glass melting rates along with the elimination of harmful emissions.

An adaptable software quality model

2018 ◽  
Vol 27 (1) ◽  
pp. 31-35
Author(s):  
MARA HAJDU-MACELARU ◽  
◽  
IOANA ZELINA ◽  
Keyword(s):  
Software Quality ◽  
Quality Evaluation ◽  
Quality Model ◽  
Accurate Evaluation ◽  
Software Products ◽  
Software Product

Just about everything changes, and so should a software quality model in order to provide a better understanding of quality for any software product to which is applied. But how can we develop such a software quality model? A software quality model pattern that can be adapted to different software products, and provide an accurate evaluation of the overall software quality. This paper presents an adaptable software quality model which is intended to be used for the quality evaluation of different software products.

scholarly journals Fragment-oriented programming: a framework to design and implement software product line domain components

DYNA ◽  
2018 ◽  
Vol 85 (207) ◽  
pp. 74-83 ◽  
Author(s):  
Daniel Correa ◽  
Raúl Mazo ◽  
Gloria Lucia Giraldo Goméz
Keyword(s):  
Software Product Line ◽  
Preliminary Evidence ◽  
Product Line ◽  
Software Systems ◽  
Software Components ◽  
Product Lines ◽  
Reusable Software ◽  
Software Products ◽  
Manual Intervention ◽  
Software Product

Software product lines facilitate the industrialization of software development. The main goal is to create a set of reusable software components for the rapid production of a software systems family. Many authors have proposed different approaches to design and implement the components of a product line. However, the construction and integration of these components continue to be a complex and time-consuming process. This paper introduces Fragment-oriented programming (FragOP), a framework to design and implement software product line domain components, and derive software products. FragOP is based on: (i) domain components, (ii) fragmentations points and (iii)fragments. FragOP was implemented in the VariaMos tool and using it we created a clothing stores software product line. We derivedfive different products, integrating automatically thousands of lines of code. On average, only three lines of code were manually modified;which provided preliminary evidence that using FragOP reduces manual intervention when integrating domain components.

scholarly journals The Connection between Czc and Cad Systems Involved in Cadmium Resistance in Pseudomonas putida

2021 ◽  
Vol 22 (18) ◽  
pp. 9697
Author(s):  
Huizhong Liu ◽  
Yu Zhang ◽  
Yingsi Wang ◽  
Xiaobao Xie ◽  
Qingshan Shi
Keyword(s):  
Pseudomonas Putida ◽  
Efflux Pump ◽  
Response Regulator ◽  
Cadmium Stress ◽  
Cadmium Resistance ◽  
Cad Systems ◽  
Cad System ◽  
Considerable Resistance ◽  
High Level ◽  
The Relationship

Heavy metal pollution is widespread and persistent, and causes serious harm to the environment. Pseudomonas putida, a representative environmental microorganism, has strong resistance to heavy metals due to its multiple efflux systems. Although the functions of many efflux systems have been well-studied, the relationship between them remains unclear. Here, the relationship between the Czc and Cad systems that are predominantly responsible for cadmium efflux in P. putida KT2440 is identified. The results demonstrated that CzcR3, the response regulator of two-component system CzcRS3 in the Czc system, activates the expression of efflux pump genes czcCBA1 and czcCBA2 by directly binding to their promoters, thereby helping the strain resist cadmium stress. CzcR3 can also bind to its own promoter, but it has only a weak regulatory effect. The high-level expression of czcRS3 needs to be induced by Cd2+, and this relies on the regulation of CadR, a key regulator in the Cad system, which showed affinity to czcRS3 promoter. Our study indicates that the Cad system is involved in the regulation of the Czc system, and this relationship is important for maintaining the considerable resistance to cadmium in P. putida.

scholarly journals NECESSITY OF A SOFTWARE PRODUCT DEVELOPMENT FOR PREPARATION OF PROJECTS FOR FOREST ROAD CONSTRUCTION ORGANIZATION IN THE CONTEXT OF BIM-TECHNOLOGIES

2021 ◽  
Author(s):  
Andrey Manukovskiy ◽  
I. Efremov
Keyword(s):  
Road Construction ◽  
General Purpose ◽  
Structural Elements ◽  
Forest Road ◽  
Automated Generation ◽  
Software Products ◽  
Functional Capabilities ◽  
Software Product ◽  
The Russian Federation ◽  
Construction Organization

This article discusses the features of the development and applicationBIM technologies in the preparation of BIM projects for timber roads in the Russian Federation. The main types of software products used in the preparation of BIM-projects of forest roads have been established. The procedure for using software products is given, their main types are established and functional capabilities are analyzed. The drawbacks and limitations of software products for general-purpose project management in the context of the use of BIM technologies are identified. The necessity of developing a specialized software product for the preparation of elements of projects for the organization of construction «Planworks», in order to increase the efficiency of the use of BIM-technologies in the preparation of projects of timber haul roads. The article describes the proposed procedure for using the developed software product, and also formulates the main stages of developing a project for organizing construction in it. The main list of the initial data required for the preparation of the organization’s project in the developed software product is disclosed. The features of the automated generation of a network model of tasks for the construction of structural elements of a timber road are described, the main types of generated tasks, as well as the features of automated task linking, are given. The advantages of using the developed software product at the stages of development of a technical design and construction of a timber road have been determined.

Sign in / Sign up

Export Citation Format

Share Document