Robust TSV via-middle and via-reveal process integration accomplished through characterization and management of sources of variation

2012 ◽  
Author(s):  
Niranjan Kumar ◽  
Sesh Ramaswami ◽  
John Dukovic ◽  
Jennifer Tseng ◽  
Ran Ding ◽  
...  
Keyword(s):  
Process Integration ◽  
Sources Of Variation

Materials Issues and Characterization of Low-k Dielectric Materials

MRS Bulletin ◽  
1997 ◽  
Vol 22 (10) ◽  
pp. 49-54 ◽  
Author(s):  
E. Todd Ryan ◽  
Andrew J. McKerrow ◽  
Jihperng Leu ◽  
Paul S. Ho
Keyword(s):  
Process Integration ◽  
Dielectric Materials ◽  
Propagation Delay ◽  
Thermomechanical Properties ◽  
General Criterion ◽  
Crosstalk Noise ◽  
Total Delay ◽  
Interlayer Dielectrics ◽  
Performance Improvements ◽  
And Performance

Continuing improvement in device density and performance has significantly affected the dimensions and complexity of the wiring structure for on-chip interconnects. These enhancements have led to a reduction in the wiring pitch and an increase in the number of wiring levels to fulfill demands for density and performance improvements. As device dimensions shrink to less than 0.25 μm, the propagation delay, crosstalk noise, and power dissipation due to resistance-capacitance (RC) coupling become significant. Accordingly the interconnect delay now constitutes a major fraction of the total delay limiting the overall chip performance. Equally important is the processing complexity due to an increase in the number of wiring levels. This inevitably drives cost up by lowering the manufacturing yield due to an increase in defects and processing complexity.To address these problems, new materials for use as metal lines and interlayer dielectrics (ILDs) and alternative architectures have surfaced to replace the current Al(Cu)/SiO2 interconnect technology. These alternative architectures will require the introduction of low-dielectric-constant k materials as the interlayer dielectrics and/or low-resistivity conductors such as copper. The electrical and thermomechanical properties of SiO2 are ideal for ILD applications, and a change to material with different properties has important process-integration implications. To facilitate the choice of an alternative ILD, it is necessary to establish general criterion for evaluating thin-film properties of candidate low-k materials, which can be later correlated with process-integration problems.

Artificial intelligence and the management transformation

2020 ◽  
Vol 16 (4) ◽  
pp. 600-612
Author(s):  
L.F. Nikulin ◽  
V.V. Velikorossov ◽  
S.A. Filin ◽  
A.B. Lanchakov
Keyword(s):  
Artificial Intelligence ◽  
Social Life ◽  
Soft Power ◽  
Process Integration ◽  
Management Practice ◽  
Scientific School ◽  
Strategic Culture ◽  
Analysis And Synthesis ◽  
And Training

Subject. The article discusses how management transforms as artificial intelligence gets more important in governance, production and social life. Objectives. We identify and substantiate trends in management transformation as artificial intelligence evolves and gets more important in governance, production and social life. The article also provides our suggestions for management and training of managers dealing with artificial intelligence. Methods. The study employs methods of logic research, analysis and synthesis through the systems and creative approach, methodology of technological waves. Results. We analyzed the scope of management as is and found that threats and global challenges escalate due to the advent of artificial intelligence. We provide the rationale for recognizing the strategic culture as the self-organizing system of business process integration. We suggest and substantiate the concept of soft power with reference to strategic culture, which should be raised, inter alia, through the scientific school of conflict studies. We give our recommendations on how management and training of managers should be improved in dealing with artificial intelligence as it evolves. The novelty hereof is that we trace trends in management transformation as the role of artificial intelligence evolves and growth in governance, production and social life. Conclusions and Relevance. Generic solutions are not very effective for the Russian management practice during the transition to the sixth and seventh waves of innovation. Any programming product represents artificial intelligence, which simulates a personality very well, though unable to substitute a manager in motivating, governing and interacting with people.

1239 Sources of variation in dry matter content and particle size distribution in total mixed rations in dairy farms in Argentina

2016 ◽  
Vol 94 (suppl_5) ◽  
pp. 596-597
Author(s):  
P. Turiello ◽  
M. Ruiz de Huidobro ◽  
F. Bargo ◽  
A. Larriestra ◽  
A. Relling
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Dry Matter ◽  
Dairy Farms ◽  
Matter Content ◽  
Dry Matter Content ◽  
Sources Of Variation

Genetic Sources of Variation in the Gestation Length of the Horse

1951 ◽  
Vol 10 (4) ◽  
pp. 797-806 ◽  
Author(s):  
W. C. Rollins ◽  
C. E. Howell
Keyword(s):  
Gestation Length ◽  
Sources Of Variation

The role of aromatic microbial metabolites

2018 ◽  
pp. 97-108
Author(s):  
Н.В. Белобородова ◽  
В.В. Мороз ◽  
А.Ю. Бедова
Keyword(s):  
Process Integration ◽  
Biological Effects ◽  
Clinical Findings ◽  
Multiple Organ ◽  
Critical Conditions ◽  
Clear Understanding ◽  
Microbial Metabolites ◽  
Blood Concentrations

Интеграция метаболизма макроорганизма и его микробиоты, обеспечивающая в норме симбиоз и саногенез, нарушается при заболеваниях, травме, критическом состоянии, и вектор взаимодействия может изменяться в пользу прокариотов по принципу «метаболиты бактерий - против хозяина». Анализ литературы показал, что, с одной стороны, имеется живой интерес к ароматическим микробным метаболитам, с другой - отсутствует четкое представление об их роли в организме человека. Публикации, касающиеся ряда ароматических микробных метаболитов (фенилкарбоновых кислот, ФКК), как правило, не связаны между собой по тематике и направлены на решение тех или иных прикладных задач в разных областях биологии и медицины. Цель обзора - анализ информации о происхождении, биологических эффектах ФКК в экспериментах in vitro и in vivo , и клинических наблюдениях. Обобщая результаты приведенных в обзоре исследований на клеточном, субклеточном и молекулярном уровнях, логично предположить участие ароматических микробных метаболитов в патогенезе полиорганной недостаточности при сепсисе. Наиболее перспективным для раскрытия роли ароматических микробных метаболитов представляется изучение механизмов вторичной почечной недостаточности и септической энцефалопатии. Важным направлением для будущих исследований является изучение влияния продуктов микробной биодеградации ароматических соединений на развитие диссеминированного внутрисосудистого свертывания крови, артериальной гипотензии и септического шока. Результаты дальнейших исследований будут иметь не только фундаментальное значение, но и обогатят практическую медицину новыми диагностическими и лечебными технологиями. Significant increases in blood concentrations of some aromatic metabolites (phenylcarboxylic acids, PhCAs) in patients with sepsis have been previously shown. Enhanced bacterial biodegradation of aromatic compounds has been demonstrated to considerably contribute to this process. Integration of macroorganism metabolism and its microbiota, which provides normal symbiosis and sanogenesis, is disturbed in diseases, trauma, and critical conditions. Direction of this interaction may change in favor of prokaryotes according to the principle, “bacterial metabolites are against the host”. Analysis of literature showed a particular interest of many investigators to aromatic microbial metabolites. However, there is no clear understanding of their role in the human body. Publications on PhCAs are generally not thematically interrelated and usually focus on solving applied tasks in different fields of biology and medicine. The aim of this work was to consolidate existing information about origin and biological effects of PhCAs in in vitro / in vivo experiments and some clinical findings. The presented summary of reported data from studies performed at cellular, sub-cellular, and molecular levels suggests participation of aromatic microbial metabolites in the pathogenesis of multiple organ failure in sepsis. Studying mechanisms of secondary renal failure and septic encephalopathy is most promising for discovering the function of aromatic microbial metabolites. Effects of microbial biodegradation products of aromatic substances on development of disseminated intravascular coagulation, hypotension, and septic shock are an important challenge for future studies. Results of further investigations will be not only fundamental, but will also enrich medical practice with new diagnostic and therapeutic technologies.

It Takes Two to Make an Interview Go Right: Round-Robin Designs to Demonstrate Interviewer and Witness Variance

2018 ◽  
Author(s):  
Charlotte A. Hudson ◽  
Liam Satchell ◽  
Nicole M Adams-Quackenbush
Keyword(s):  
Grain Size ◽  
Individual Differences ◽  
Individual Difference ◽  
Round Robin ◽  
Investigative Interviews ◽  
Sources Of Variation ◽  
Interview Performance ◽  
Report Accuracy ◽  
Statistical Demonstration

Purpose: Investigative interviews are complex, dyadic, activities typically studied by focusing on developing techniques to improve witness performance. However, in field settings, interviewers are known to vary in their presentation of good interviewing practice. Thus, it is important to conduct research reflective of complex idiosyncrasies in witnesses, interviewers and unique pairings of both. This study explores such sources of variation in an by making use of a 'round-robin' design. Such methodology allows the statistical demonstration of individual difference and unique partner-generated variance in interview performance. Methods: In our study, a total of 45 witnesses were questioned about five real crime videos. After witnessing each event, witnesses were interviewed by a different interviewer (or a computer self-administered interview). In total, nine 'rounds' of interviews occurred, with five new witnesses being interviewed in the same five interview settings (resulting in 225 interviews). After each interview both interviewers and witnesses were asked to complete subjective interview experience ratings. The quality (grain size) and quantity of information in the statements was coded to index witness report accuracy. Results: Principally, the results demonstrate the degree to which witnesses and interviewers affect statement quality, and highlight the influence of unique interviewer-witness pairs. (Participant personality and interviewer behaviour were also analysed, but with limited effects). Conclusion: This study presents the useful round-robin methodology for studying interviewer-witness behaviour. Whilst the current personality and behavioural measures do not account for these individual differences, we advocate this methodology be adopted more widely to better understand interview performance.

Characterization of Unfilled Tungsten Plugs on a 0.35μm CMOS Multilevel Metallization Process

1996 ◽  
Author(s):  
H. Sur ◽  
S. Bothra ◽  
Y. Strunk ◽  
J. Hahn
Keyword(s):  
Process Development ◽  
Process Integration ◽  
Wafer Level ◽  
Electrical Failure ◽  
Analysis Techniques ◽  
Integration Approach ◽  
Intermetal Dielectric ◽  
Metallization Process ◽  
Section Analysis

Abstract An investigation into metallization/interconnect failures during the process development phase of an advanced 0.35μm CMOS ASIC process is presented. The corresponding electrical failure signature was electrical shorting on SRAM test arrays and subsequently functional/Iddq failures on product-like test vehicles. Advanced wafer-level failure analysis techniques and equipment were used to isolate and identify the leakage source as shorting of metal lines due to tungsten (W) residue which was originating from unfilled vias. Further cross-section analysis revealed that the failing vias were all exposed to the intermetal dielectric spin-on glass (SOG) material used for filling the narrow spaces between metal lines. The outgassing of the SOG in the exposed regions of the via prior to and during the tungsten plug deposition is believed to be the cause of the unfilled vias. This analysis facilitated further process development in eliminating the failure mechanism and since then no failures of this nature have been observed. The process integration approach used to eliminate the failure is discussed.

The Novel TEM Sample Preparation Approach for Targeted via with Barrier/Cu Seed Layer Inspection

2009 ◽  
Author(s):  
Wen-Fei Hsieh ◽  
Shih-Hsiang Tseng ◽  
Bo Min She
Keyword(s):  
Sample Preparation ◽  
Cross Section ◽  
Seed Layer ◽  
Target Location ◽  
Process Development ◽  
Process Integration ◽  
Ion Beam ◽  
Main Tool ◽  
Dual Beam ◽  
Sample Preparation Procedure

Abstract In this study, an FIB-based cross section TEM sample preparation procedure for targeted via with barrier/Cu seed layer is introduced. The dual beam FIB with electron beam for target location and Ga ion beam for sample milling is the main tool for the targeted via with barrier/Cu seed layer inspection. With the help of the FIB operation and epoxy layer protection, ta cross section TEM sample at a targeted via with barrier/Cu seed layer could be made. Subsequent TEM inspection is used to verify the quality of the structure. This approach was used in the Cu process integration performance monitor. All these TEM results are very helpful in process development and yield improvement.

The sugar and alcohol industry in the biofuels and cogeneration era: a paradigm change (part II)

2014 ◽  
pp. 97-104 ◽  
Author(s):  
Electo Eduardo Silv Lora ◽  
Mateus Henrique Rocha ◽  
José Carlos Escobar Palacio ◽  
Osvaldo José Venturini ◽  
Maria Luiza Grillo Renó ◽  
...  
Keyword(s):  
Large Scale ◽  
New Technologies ◽  
Process Integration ◽  
Animal Feed ◽  
Raw Materials ◽  
Biofuel Production ◽  
New Paradigm ◽  
Alcohol Industry ◽  
Feed Production ◽  
Steam Parameters

The aim of this paper is to discuss the major technological changes related to the implementation of large-scale cogeneration and biofuel production in the sugar and alcohol industry. The reduction of the process steam consumption, implementation of new alternatives in driving mills, the widespread practice of high steam parameters use in cogeneration facilities, the insertion of new technologies for biofuels production (hydrolysis and gasification), the energy conversion of sugarcane trash and vinasse, animal feed production, process integration and implementation of the biorefinery concept are considered. Another new paradigm consists in the wide spreading of sustainability studies of products and processes using the Life Cycle Assessment (LCA) and the implementation of sustainability indexes. Every approach to this issue has as an objective to increase the economic efficiency and the possibilities of the sugarcane as a main source of two basic raw materials: fibres and sugar. The paper briefly presents the concepts, indicators, state-of-the-art and perspectives of each of the referred issues.

Sign in / Sign up

Export Citation Format

Share Document