An analysis and implementation of common mode feedback in high-speed fully differential op-amp

2007 ◽  
Author(s):  
Chen Chen ◽  
KangKang Ge ◽  
Lenian He
Keyword(s):  
High Speed ◽  
Common Mode ◽  
Fully Differential ◽  
Op Amp

A High-Speed Fully Differential Telescopic Op-Amp for Active Filter Designs in V2X Applications

2021 ◽  
Author(s):  
Furkan Barin ◽  
Ertan Zencir
Keyword(s):  
High Speed ◽  
Low Voltage ◽  
Supply Voltage ◽  
Active Filter ◽  
Ultra Wideband ◽  
Two Stage ◽  
Fully Differential ◽  
Op Amp ◽  
Current Mirrors ◽  
Design Techniques

In this paper, an ultra-wideband fully differential two-stage telescopic 65-nm CMOS op-amp is presented, which uses low-voltage design techniques such as level shifter circuits and low-voltage cascode current mirrors. The designed op-amp consists of two stages. While the telescopic first stage provides high speed and low swing, the second stage provides high gain and large swing. Common-mode feedback circuits (CMFB), which contain five transistors OTA and sensing resistors, are used to set the first-stage output to a known value. The designed two-stage telescopic operational amplifier has 41.04[Formula: see text]dB lower frequency gain, 1.81[Formula: see text]GHz gain-bandwidth product (GBW) and 51.9∘ phase margin under 5[Formula: see text]pF load capacitance. The design consumes a total current of 11.9[Formula: see text]mA from a 1.2-V supply voltage. Presented fully differential two-stage telescopic op-amp by using low-voltage design techniques is suitable for active filter in vehicle-to-everything (V2X) applications with 120[Formula: see text][Formula: see text]m[Formula: see text]m layout area.

Design of a New Low Power Fully Differential Amplifier with Settling Time Enhancement Characteristics

2015 ◽  
Vol 24 (06) ◽  
pp. 1550078 ◽  
Author(s):  
Seid Jafar Hosseinipouya ◽  
Farhad Dastadast
Keyword(s):  
High Performance ◽  
Settling Time ◽  
Cmos Process ◽  
Output Stage ◽  
Common Mode ◽  
Class Ab ◽  
Fully Differential ◽  
Op Amp ◽  
Transconductance Amplifier ◽  
Adaptive Biasing

High performance of fully differential operational transconductance amplifier is designed and implemented using a 0.18-μm CMOS process. The implemented op-amp uses common mode feedback (CMFB) circuit operating in weak inversion region which does not affect other electrical characteristics due to eliminating common mode (CM) levels automatically leading to improve CM rejection ratio (CMRR) of the amplifier significantly. Moreover, the output stage has class-AB operation so that its current can be made larger due to increasing the output current dynamically using adaptive biasing circuit. Additionally, the AC currents of the active loads have been significantly reduced using negative impedances to increase the gain of the amplifier. The results show the GBW 2.3 MHz, slew rate 2.6 V/μs and 1% settling time 150 ns with a capacitive load of 15 pF. This amplifier dissipates only 6.2 μW from a 1.2 V power supply.

A FAST AND LOW SETTLING ERROR CONTINUOUS-TIME COMMON-MODE FEEDBACK CIRCUIT BASED ON DIFFERENTIAL DIFFERENCE AMPLIFIER

2014 ◽  
Vol 23 (05) ◽  
pp. 1450065 ◽  
Author(s):  
TOHID MORADI KHANESHAN ◽  
SAEED NAGHAVI ◽  
MOJDE NEMATZADE ◽  
KHAYROLLAH HADIDI ◽  
ADIB ABRISHAMIFAR ◽  
...  
Keyword(s):  
Continuous Time ◽  
High Speed ◽  
Cmos Technology ◽  
Common Mode ◽  
Op Amp ◽  
Wide Range ◽  
Differential Difference Amplifier ◽  
Unity Gain ◽  
Folded Cascode ◽  
Speed And Accuracy

A high-speed and high-accuracy continuous-time common-mode feedback block (CMFB) is presented. To satisfy speed and accuracy requirements, some modifications have been applied on differential difference amplifier (DDA) CMFB circuit. The proposed method is applied to a folded cascode op-amp with power supply of 3.3 V. In order to verify the proposed circuit, simulations are done in 0.35 μm standard CMOS technology. In the worst condition when the output common-mode (CM) voltage is initialized to VCC or GND, only 1.1 ns is required to set the output CM voltage on the desired level. Also in a wide range of input CM voltage variations, the deviation of the output CM voltage from reference voltage is less than 6 mV, so simulation results confirm the expected accuracy and speed while simultaneously the proposed CMFB circuit preserves other characteristics of DDA CMFB circuit such as unity gain frequency, 3-dB bandwidth, phase margin and linearity.

scholarly journals Design of PMOS and NMOS Input Folded Cascode Amplifier using 180nm SCL Technology Node for Low Power Application

2020 ◽  
Vol 9 (4) ◽  
pp. 1372-1375
Keyword(s):  
Metal Oxide ◽  
Low Power ◽  
High Speed ◽  
Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Technology Node ◽  
Fully Differential ◽  
Op Amp ◽  
Folded Cascode ◽  
Cascode Amplifier

This paper presents the details design and simulation of the Folded Cascode amplifier using Source-Coupled-Logic (SCL) technology node for both the P-Type Metal Oxide Semiconductor (PMOS) and N-Type Metal Oxide Semiconductor (NMOS) input. The different way to implement the circuit design for a given specification has clearly described including all the design equation has been presented. All the parameter like open loop gain, Unity Gain Bandwidth (UGB) and Phase Margin (PM) are compared for both the NMOS and PMOS input fully differential folded cascode op-amp circuit are discussed and finally we have got after performance analysis that NMOS input fully differential folded cascode op-amp is the best choice for low power high speed application like in pipeline Analog to Digital (ADC). The circuit has been simulated using cadence virtuoso tool in 0.18µm SCL technology node.

Switched-Capacitor Common-Mode Feedback-Based Fully Differential Operational Amplifiers and its Usage in Implementation of Integrators

2020 ◽  
Vol 29 (14) ◽  
pp. 2050223
Author(s):  
Joydeep Basu ◽  
Pradip Mandal
Keyword(s):  
Continuous Time ◽  
High Gain ◽  
Design Guidelines ◽  
Operational Amplifiers ◽  
Switched Capacitor ◽  
Common Mode ◽  
Fully Differential ◽  
Op Amp ◽  
Dc Gain ◽  
Minimum Power Consumption

For stabilizing the common-mode output voltage of fully differential operational amplifiers, switched-capacitor (SC) type of common-mode feedback (CMFB) is a familiar technique. This is appropriate for implementing high-gain wide-swing low-power op-amps due to its benefits of minimum power consumption, superior linearity across a large amplifier output swing range, and improved feedback loop stability in comparison to continuous-time CMFB. However, the usage of SC-CMFB requires careful attention to some realistic aspects, details of many of which are available in literature. Nonetheless, its adverse effect on the op-amp’s differential-mode gain has not been investigated much. The explanation for this effect is the SC-CMFB-induced equivalent resistive loading, and this is particularly significant in amplifiers like folded cascode which are intended to provide a high gain. This issue of drop in op-amp dc gain because of SC-CMFB, and the consequence on the realization of continuous-time and discrete-time forms of integrators utilizing such amplifiers is the topic of discussion in this paper. Relevant analytical derivations and circuit simulations at the transistor level are provided. A couple of design guidelines and circuit topologies for minimizing the loading-induced gain reduction are also presented.

scholarly journals Implementation of Power-Efficient Class AB Miller Amplifiers Using Resistive Local Common-Mode Feedback

2021 ◽  
Vol 11 (3) ◽  
pp. 31
Author(s):  
Anindita Paul ◽  
Mario Renteria-Pinon ◽  
Jaime Ramirez-Angulo ◽  
Ricardo Bolaños-Pérez ◽  
Héctor Vázquez-Leal ◽  
...  
Keyword(s):  
Current Efficiency ◽  
Figure Of Merit ◽  
Small Signal ◽  
Common Mode ◽  
Power Efficient ◽  
Class Ab ◽  
Op Amp ◽  
Class A ◽  
Wide Range ◽  
Quiescent Current

An approach to implement single-ended power-efficient static class-AB Miller op-amps with symmetrical and significantly enhanced slew-rate and accurately controlled output quiescent current is introduced. The proposed op-amp can drive a wide range of resistive and capacitive loads. The output positive and negative currents can be much higher than the total op-amp quiescent current. The enhanced performance is achieved by utilizing a simple low-power auxiliary amplifier with resistive local common-mode feedback that increases the quiescent power dissipation by less than 10%. The proposed class AB op-amp is characterized by significantly enhanced large-signal dynamic, static current efficiency, and small-signal figures of merits. The dynamic current efficiency is 15.6 higher, the static current efficiency is 8.9 times higher, and the small-signal figure of merit is 2.3 times higher than the conventional class-A op-amp. A global figure of merit that determines an op-amp’s ultimate speed is 6.33 times higher than the conventional class A op-amp.

Sign in / Sign up

Export Citation Format

Share Document