The Influence of Crude Oil Carbon Content, Sulfur Content and Density on Absorption Coefficient and Refractive Index in the 0.2-2.5THz Band

2021 ◽  
Author(s):  
Haiqing Huang ◽  
Xuemin Li ◽  
Qiuhong Cao ◽  
Hongmei Lin ◽  
Qingjian Zhang ◽  
...  
Keyword(s):  
Refractive Index ◽  
Absorption Coefficient ◽  
Crude Oil ◽  
Carbon Content ◽  
Sulfur Content

Study of the Effect of Crude Oils on the Metallic Corrosion

2018 ◽  
Vol 5 (1) ◽  
pp. 43-54
Author(s):  
Suresh Aluvihara ◽  
Jagath K Premachandra
Keyword(s):  
Crude Oil ◽  
Sulfur Content ◽  
Salt Content ◽  
Ferrous Metal ◽  
Relative Weight ◽  
Oil Refining ◽  
Crude Oils ◽  
Hardness Tester ◽  
Corrosion Rates ◽  
Ferrous Metals

Corrosion is a severe matter regarding the most of metal using industries such as the crude oil refining. The formation of the oxides, sulfides or hydroxides on the surface of metal due to the chemical reaction between metals and surrounding is the corrosion that  highly depended on the corrosive properties of crude oil as well as the chemical composition of ferrous metals since it was expected to investigate the effect of Murban and Das blend crude oils on the rate of corrosion of seven different ferrous metals which are used in the crude oil refining industry and investigate the change in hardness of metals. The sulfur content, acidity and salt content of each crude oil were determined. A series of similar pieces of seven different types of ferrous metals were immersed in each crude oil separately and their rates of corrosion were determined by using their relative weight loss after 15, 30 and 45 days. The corroded metal surfaces were observed under the microscope. The hardness of each metal piece was tested before the immersion in crude oil and after the corrosion with the aid of Vicker’s hardness tester. The metallic concentrations of each crude oil sample were tested using atomic absorption spectroscopy (AAS). The Das blend crude oil contained higher sulfur content and acidity than Murban crude oil. Carbon steel metal pieces showed the highest corrosion rates whereas the stainless steel metal pieces showed the least corrosion rates in both crude oils since that found significant Fe and Cu concentrations from some of crude oil samples. The mild steel and the Monel showed relatively intermediate corrosion rates compared to the other types of ferrous metal pieces in both crude oils. There was a slight decrease in the initial hardness of all the ferrous metal pieces due to corrosion.

Study the Effect of Heat Treatment and Pressure on some the Optical Properties of the Pure PVA Nano Polymer

2021 ◽  
Vol 900 ◽  
pp. 16-25
Author(s):  
Tabarak Mohammed Awad ◽  
May A.S. Mohammed
Keyword(s):  
Heat Treatment ◽  
Dielectric Constant ◽  
Refractive Index ◽  
Optical Properties ◽  
Absorption Coefficient ◽  
Polyvinyl Alcohol ◽  
Complex Dielectric Constant ◽  
Different Temperatures ◽  
German Origin ◽  
Increasing Temperature

In this study, some optical properties were studied of the pure vinyl polyvinyl alcohol (PVA) nanopolymer (German origin). Under the influence of different temperatures and pressures of PVA. Where 25 samples were prepared for the purpose of conducting the research. Which studied the study of these samples was done by recording the absorbance and transmittance spectra of the wavelengths (200-900) nm. From them, absorbance, transmittance, reflectivity, absorption coefficient, refractive index, extinction coefficient, complex dielectric constant were calculated. At different temperatures (25,40, 80, 120, 160)°C. And with different pressures within the range (7.5,8,8.5,9,9.5) MPa. The results are that the permeability of the polymer (PVA) at different temperatures for each pressure decreases with increasing temperature, and that all other calculated optical properties increase with increasing temperature.

E EVALUASI MUTU MINYAK BUMI DENGAN DISTILASI TRUE BOILING POINT (TBP) BERDASARKAN PARAMETER UJI SIFAT FISIKA SEBAGAI BAHAN BAKU PRODUK KEROSIN DAN AVTUR

2019 ◽  
Vol 10 (01) ◽  
pp. 20-27
Author(s):  
Dian Kurnia Sari ◽  
Rian Ternando
Keyword(s):  
Refractive Index ◽  
Specific Gravity ◽  
Crude Oil ◽  
Boiling Point ◽  
Kinematic Viscosity ◽  
Freezing Point ◽  
Smoke Point ◽  
Flash Point ◽  
Primary Process ◽  
Copper Strip

Minyak bumi dievaluasi guna menentukan potensi minyak bumi sebagai bahan baku kilang minyak untuk menghasilkan fraksi yang dikehendaki. Evaluasi yang dilakukan meliputi pengujian sifat umum minyak bumi, klasifikasi minyak bumi dengan distilasi True Boiling Point (TBP) wide cut (pemotongan jarak lebar) serta analisis fraksi kerosin. Fraksi kerosin yang dihasilkan dari primary process dapat diolah menjadi bahan bakar rumah tangga (minyak  tanah) dan bahan bakar lampu penerangan. Selain itu fraksi kerosin juga dapat dioalah menjadi bahan bakar untuk pesawat terbang jenis jet (avtur). Avtur adalah kerosin yang dengan  spesifikasi yang diperketat, terutama mengenai titik uap dan titik beku. Untuk melakukan pengolahan pada minyak bumi perlu diketahui karakteristik dan spesifikasi minyak  bumi (bahan baku) yang akan diolah untuk mengetahui mutu dan manfaat minyak bumi tersebut. Salah satu parameter uji analisis minyak bumi yaitu parameter sifat fisika. Dari data distilasi TBP diperoleh persentase fraksi kerosin Crude Oil 99 PT HS sebesar 29 % vol sedangkan Crude Oil 165 PT RT sebesar 23 % vol. Berdasarkan analisis sifat fisika yang meliputi Specific Gravity, Refractive Index nD20, Freezing Point, Smoke Point, Flash Point “Abel”, Aniline Point, Copper Strip Corrosion, Kinematic Viscosity dan Characterization KUOP. Crude Oil 99 dan Crude Oil 165 memiliki mutu yang baik serta memenuhi spesifikasi produk kerosin maupun produk avtur.

THEORETICAL MODEL FOR THE CALCULATION OF OPTICAL PROPERTIES OF GOLD NANOPARTICLES

2010 ◽  
Vol 19 (03) ◽  
pp. 427-436
Author(s):  
A. MENDOZA-GARCÍA ◽  
A. ROMERO-DEPABLOS ◽  
M. A. ORTEGA ◽  
J. L. PAZ ◽  
L. ECHEVARRÍA
Keyword(s):  
Gold Nanoparticles ◽  
Refractive Index ◽  
Optical Properties ◽  
Theoretical Model ◽  
Absorption Coefficient ◽  
Molecular System ◽  
Two Dimensional ◽  
Box Models ◽  
Solvent Environment ◽  
Absorption And Dispersion

We have developed an analytical method to describe the optical properties of nanoparticles, whose results are in agreement with the observed experimental behavior according to the size of the nanoparticle under analysis. Our considerations to describe plasmonic absorption and dispersion are based on the combination of the two-level molecular system and the two-dimensional quantum box models. Employing the optical stochastic Bloch equations, we have determined the system's coherence, from which we have calculated expressions for the absorption coefficient and refractive index. The innovation of this methodology is that it allows us to take into account the solvent environment, which induce quantum effects not considered by classical treatments.

scholarly journals The scattering of light by turbid media.–Part II

1931 ◽  
Vol 131 (817) ◽  
pp. 464-475 ◽  
Keyword(s):  
Refractive Index ◽  
Absorption Coefficient ◽  
Spherical Shell ◽  
Direct Observation ◽  
Single Particle ◽  
Unit Volume ◽  
Incident Light ◽  
Parallel Beam ◽  
Photometric Observations ◽  
Transmission And Reflection

In Part I it was shown how the values of the transmission and reflection of a sheet of a medium containing particles in suspension can he calculated. First the amounts of light scattered in the forward and forward directions from a single particle were determined; from these results the transmission 1 and rejection R for diffuse incident light were found for a layer of the disusing medium, when the effects of boundary reflections are negligible. At this stage, the expressions developed apply to a mist or fog consisting of particles suspended in air. Finally it was shown how, if the particles are suspended in some other medium, having a different refractive index from that of air, the transmission and reflection ז and p can be expressed in terms of T and R and the surface rejection coefficients. The more general expressions, for the case when the incident light is a parallel beam, were also developed. We shall now show how the absorption coefficient μ can be determined from photometric observations. As a check on the theory, we shall deduce the diameter D of the particles and the number N present per unit volume and compare these calculated values with those found by direct observation, Finally, the necessary modifications of the theory will be made to cover the case when the diffusing medium is in the form of a spherical shell.

scholarly journals Preparation and Studying the Optical Properties of (Sb2o3) Thin Films

2018 ◽  
Vol 26 (10) ◽  
pp. 249-256
Author(s):  
Waleed Khalid Kadhim
Keyword(s):  
Thin Films ◽  
Dielectric Constant ◽  
Refractive Index ◽  
Optical Properties ◽  
Absorption Coefficient ◽  
Thermal Evaporation ◽  
Glass Slide ◽  
Antimony Trioxide ◽  
Hot Plate ◽  
Different Thickness

In this paper I present the preparation of (Sb2o3) thin films using thermal evaporation in vacuum, procedure with different thickness  (100 ,150 ,200 ,and 250) nm, by using ( hot plate) from Molybdenum matter at temperature in ( 9000c) and the period of time (15mint) ,the prepared in a manner thermal evaporation in a vacuum and precipitated on glass bases, pure Antimony Trioxide (sb2o3 ) thin films with various condition have been successfully deposited by (T.E.V) on glass slide substrates. The substrates temperature of about 100oC and the vacuum of about 10-6 torr, to investigated oxidation of evaporated, measure spectra for prepared films in arrange of wavelength (250 – 1100 nm). The following optical properties have been calculated: the absorption coefficient, the forbidden (Eg) for direct and indirect transitions "absorbance, refractive index,  extinction coefficient, real and imaginary parts" of the dielectric constant.

scholarly journals Deposition Time induced Structural and Optical Properties of Lead Tin Sulphide Thin Films

2021 ◽  
pp. 455-458
Author(s):  
J. Damisa ◽  
J. O. Emegha ◽  
I. L. Ikhioya
Keyword(s):  
Thin Films ◽  
Refractive Index ◽  
Optical Properties ◽  
Absorption Coefficient ◽  
Tin Oxide ◽  
Deposition Time ◽  
Deposition Process ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Prepared Material

Lead tin sulphide (Pb-Sn-S) thin films (TFs) were deposited on fluorine-doped tin oxide (FTO) substrates via the electrochemical deposition process using lead (II) nitrate [Pb(NO3)2], tin (II) chloride dehydrate [SnCl2.2H2O] and thiacetamide [C2H5NS] precursors as sources of lead (Pb), tin (Sn) and sulphur (S). The solution of all the compounds was harmonized with a stirrer (magnetic) at 300k. In this study, we reported on the improvements in the properties (structural and optical) of Pb-Sn-S TFs by varying the deposition time. We observed from X-ray diffractometer (XRD) that the prepared material is polycrystalline in nature. UV-Vis measurements were done for the optical characterizations and the band gap values were seen to be increasing from 1.52 to 1.54 eV with deposition time. In addition to this, the absorption coefficient and refractive index were also estimated and discussed.

scholarly journals Annealing Effect on Some Optical Properties of Cr2O3 Thin Films Prepared by Spray Pyrolysis Technique

2011 ◽  
Vol 8 (2) ◽  
pp. 561-565
Author(s):  
Baghdad Science Journal
Keyword(s):  
Thin Films ◽  
Dielectric Constant ◽  
Refractive Index ◽  
Optical Properties ◽  
Absorption Coefficient ◽  
Spray Pyrolysis ◽  
Annealing Temperature ◽  
Spray Pyrolysis Technique ◽  
Annealing Effect ◽  
Before And After

Cr2O3 thin films have been prepared by spray pyrolysis on a glass substrate. Absorbance and transmittance spectra were recorded in the wavelength range (300-900) nm before and after annealing. The effects of annealing temperature on absorption coefficient, refractive index, extinction coefficient, real and imaginary parts of dielectric constant and optical conductivity were expected. It was found that all these parameters increase as the annealing temperature increased to 550°C.

Sign in / Sign up

Export Citation Format

Share Document