Low-cost CSRR based sensor for determination of dielectric constant of liquid samples

2021 ◽  
pp. 1-1
Author(s):  
Akash Buragohain ◽  
Abu Tahir Talat Mostako ◽  
Gouree Shankar Das
Keyword(s):  
Dielectric Constant ◽  
Low Cost ◽  
Liquid Samples

Optimization of a Spectrophotometric Flow Injection

2020 ◽  
pp. 175-203
Author(s):  
Germán Adán Sánchez Gallegos ◽  
Maria del Pilar Haro Vazquez ◽  
José Manuel Cornejo-Bravo ◽  
Eugenia Gabriela Carrillo-Cedillo
Keyword(s):  
Low Cost ◽  
Flow Cell ◽  
Physical Parameters ◽  
Factorial Designs ◽  
Sample Material ◽  
Real Samples ◽  
Straightforward Application ◽  
Liquid Samples ◽  
Determination Of Copper

This chapter presents the optimization of the hydrodynamic and chemical parameters of the FIA system in the determination of copper and manganese in wine samples by VIS spectrophotometry. This technique has been based on the injection of liquid samples in the non-segmented movement, within a continuous carrier current of a suitable liquid. The injected sample forms a zone that disperses on its way to a detector. The later continuously records the absorbance or other physical parameters, since it continuously passes the sample material through the flow cell, using the factorial designs Plackett-Burman, Box-Behnken, and the factorial design 2^4. The methods have the advantages of low-cost, easy availability of chemicals, and instrumentation and straightforward application to real samples.

Determination of Bovine Lactoferrin in Food by HPLC with a Heparin Affinity Column for Sample Preparation

2017 ◽  
Vol 100 (1) ◽  
pp. 133-138 ◽  
Author(s):  
Yin Zhang ◽  
Fei Lou ◽  
Wei Wu ◽  
Xin Dong ◽  
Jia Ren ◽  
...  
Keyword(s):  
Low Cost ◽  
Great Promise ◽  
Array Detector ◽  
Affinity Column ◽  
Bovine Lactoferrin ◽  
Solid Samples ◽  
Detection Range ◽  
Liquid Samples ◽  
Heparin Affinity

Abstract An HPLC method was developed for the quantitative determination of bovine lactoferrin (bLF) in sterilized milk, modified milk, fermented milk, infant formula, adult formula, rice cereal, vitamin function drink, and protein powder products. bLF was first extracted with a phosphate buffer (pH 8), underwent cleanup in a heparin affinity column, and was detected by HPLC with a C4 column and diode-array detector at a wavelengthof 280 nm. The proposed method provided a linear detection range of 10.0–1000 μg/mL with an LOD of 0.6 mg/100 g in liquid samples and 3 mg/100 g in solid samples and an LOQ of 2 mg/100 g in liquid samples and 10 mg/100 g in solid samples. In addition, the method showed good recovery for various samples, ranging from 76 to 96%. The method had several remarkable advantages, including ease of handling, high sensitivity and accuracy, good reproducibility, and low-cost detection. Based on the distinctive properties presented here, webelieve the proposed HPLC assay holds great promise for the oversight and detection of bLF in testing organizations, dairy enterprises, and regulatory authorities.

Development of a Capacitor Probe to Detect Subsurface Deterioration in Concrete

1997 ◽  
Vol 503 ◽  
Author(s):  
B. K. Diefenderfer ◽  
I. L. Al-Qadi ◽  
J. J. Yoho ◽  
S. M. Riad ◽  
A. Loulizi
Keyword(s):  
Dielectric Constant ◽  
Portland Cement ◽  
Electromagnetic Waves ◽  
Low Cost ◽  
Complex Dielectric Constant ◽  
Life Cycle Costs ◽  
Parallel Plates ◽  
Portland Cement Concrete ◽  
Cement Concrete ◽  
Set Up

ABSTRACTPortland cement concrete (PCC) structures deteriorate with age and need to be maintained or replaced. Early detection of deterioration in PCC (e.g., alkali-silica reaction, freeze/thaw damage, or chloride presence) can lead to significant reductions in maintenance costs. However, it is often too late to perform low-cost preventative maintenance by the time deterioration becomes evident. By developing techniques that would enable civil engineers to evaluate PCC structures and detect deterioration at early stages (without causing further damage), optimization of life-cycle costs of the constructed facility and minimization of disturbance to the facility users can be achieved.Nondestructive evaluation (NDE) methods are potentially one of the most useful techniques ever developed for assessing constructed facilities. They are noninvasive and can be performed rapidly. Portland cement concrete can be nondestructively evaluated by electrically characterizing its complex dielectric constant. The real part of the dielectric constant depicts the velocity of electromagnetic waves in PCC. The imaginary part, termed the “loss factor,” describes the conductivity of PCC and the attenuation of electromagnetic waves.Dielectric properties of PCC have been investigated in a laboratory setting using a parallel plate capacitor operating in the frequency range of 0.1 to 40.1MIHz. This capacitor set-up consists of two horizontal-parallel plates with an adjustable separation for insertion of a dielectric specimen (PCC). While useful in research, this approach is not practical for field implementation. A new capacitor probe has been developed which consists of two plates, located within the same horizontal plane, for placement upon the specimen to be tested. Preliminary results show that this technique is feasible and results are promising; further testing and evaluation is currently underway.

Microextraction and Chromatographic Analysis of Budesonide Epimers in Exhaled Breath Condensate

2020 ◽  
Vol 16 (8) ◽  
pp. 1032-1040
Author(s):  
Laleh Samini ◽  
Maryam Khoubnasabjafari ◽  
Mohamad M. Alimorad ◽  
Vahid Jouyban-Gharamaleki ◽  
Hak-Kim Chan ◽  
...  
Keyword(s):  
Biological Fluids ◽  
Exhaled Breath Condensate ◽  
Low Cost ◽  
Exhaled Breath ◽  
Chromatography Method ◽  
Extraction Solvent ◽  
Drug Concentrations ◽  
Dispersive Liquid Liquid Microextraction ◽  
Breath Condensate

Background: Analysis of drug concentrations in biological fluids is required in clinical sciences for various purposes. Among other biological samples, exhaled breath condensate (EBC) is a potential sample for follow up of drug concentrations. Methods: A dispersive liquid-liquid microextraction (DLLME) procedure followed by a validated liquid chromatography method was employed for the determination of budesonide (BDS) in EBC samples collected using a homemade setup. EBC is a non-invasive biological sample with possible applications for monitoring drug concentrations. The proposed analytical method is validated according to the FDA guidelines using EBC-spiked samples. Its applicability is tested on EBC samples collected from healthy volunteers receiving a single puff of BDS. Results: The best DLLME conditions involved the use of methanol (1 mL) as a disperser solvent, chloroform (200 μL) as an extraction solvent, and centrifugation rate of 3500 rpm for 5 minutes. The method was validated over a concentration range of 21-210 μg·L-1 in EBC. Inter- and intra-day precisions were less than 10% where the acceptable levels are less than 20%. The validated method was successfully applied for the determination of BDS in EBC samples. Conclusion: The findings of this study indicate that the developed method can be used for the extraction and quantification of BDS in EBC samples using a low cost method.

Development and Validation of an Eco-Friendly and Low-Cost Method for the Quantification of Cefepime Hydrochloride in Powder for Injectable Solution Using Infrared (IR) Spectroscopy

2020 ◽  
Vol 16 (4) ◽  
pp. 456-464
Author(s):  
Danilo F. Rodrigues ◽  
Hérida R.N. Salgado
Keyword(s):  
Ir Spectroscopy ◽  
Low Cost ◽  
Pharmaceutical Preparations ◽  
Potassium Bromide ◽  
Pharmaceutical Products ◽  
Injectable Formulation ◽  
Ich Guidelines ◽  
Lactam Ring ◽  
Development And Validation

Background: A simple, eco-friendly and low-cost Infrared (IR) method was developed and validated for the analysis of Cefepime Hydrochloride (CEF) in injectable formulation. Different from some other methods, which employ organic solvents in the analyses, this technique does not use these types of solvents, removing large impacts on the environment and risks to operators. Objective: This study aimed at developing and validating a green analytical method using IR spectroscopy for the determination of CEF in pharmaceutical preparations. Methods: The method was validated according to ICH guidelines and the quantification of CEF was performed in the spectral region absorbed at 1815-1745 cm-1 (stretching of the carbonyl group of β- lactam ring). Results: The validated method showed to be linear (r = 0.9999) in the range of 0.2 to 0.6 mg/pellet of potassium bromide, as well as for the parameters of selectivity, precision, accuracy, robustness and Limits of Detection (LOD) and Quantification (LOQ), being able to quantify the CEF in pharmaceutical preparations. The CEF content obtained by the IR method was 103.86%. Conclusion: Thus, the method developed may be an alternative in the quality control of CEF sample in lyophilized powder for injectable solution, as it presented important characteristics in the determination of the pharmaceutical products, with low analysis time and a decrease in the generation of toxic wastes to the environment.

Graphene Modified Molecular Imprinting Electrochemical Sensor for Determining the Content of Dopamine

2019 ◽  
Vol 15 (6) ◽  
pp. 628-634
Author(s):  
Rong Liu ◽  
Jie Li ◽  
Tongsheng Zhong ◽  
Liping Long
Keyword(s):  
Electrochemical Sensor ◽  
Molecular Imprinting ◽  
Neurological Disorders ◽  
Room Temperature ◽  
Low Cost ◽  
Differential Pulse ◽  
Current Response ◽  
Specific Selectivity ◽  
Pulse Voltammetry

Background: The unnatural levels of dopamine (DA) result in serious neurological disorders such as Parkinson’s disease. Electrochemical methods which have the obvious advantages of simple operation and low-cost instrumentation were widely used for determination of DA. In order to improve the measurement performance of the electrochemical sensor, molecular imprinting technique and graphene have always been employed to increase the selectivity and sensitivity. Methods: An electrochemical sensor which has specific selectivity to (DA) was proposed based on the combination of a molecular imprinting polymer (MIP) with a graphene (GR) modified gold electrode. The performance and effect of MIP film were investigated by differential pulse voltammetry (DPV) and cyclic voltammetry (CV) in the solution of 5.0 ×10-3 mol/L K3[Fe(CN)6] and K4[Fe(CN)6] with 0.2 mol/L KCl at room temperature. Results: This fabricated sensor has well repeatability and stability, and was used to determine the dopamine of urine. Under the optimized experiment conditions, the current response of the imprinted sensor was linear to the concentration of dopamine in the range of 1.0×10-7 ~ 1.0×10-5 mol/L, the linear equation was I (µA) = 7.9824+2.7210lgc (mol/L) with the detection limit of 3.3×10-8 mol/L. Conclusion: In this work, a highly efficient sensor for determination of DA was prepared with good sensitivity by GR and great selectivity of high special recognization ability by molecular imprinting membrane. This proposed sensor was used to determine the dopamine in human urine successfully.

Non-enzymatic determination of purine nucleotides using a carbon dot modified glassy carbon electrode

2019 ◽  
Vol 11 (30) ◽  
pp. 3866-3873 ◽  
Author(s):  
R. Karthikeyan ◽  
D. James Nelson ◽  
S. Abraham John
Keyword(s):  
Glassy Carbon ◽  
Low Cost ◽  
Phosphate Buffer Solution ◽  
Purine Nucleotides ◽  
Buffer Solution ◽  
Solution Ph ◽  
Carbon Dot ◽  
Enzymatic Determination ◽  
Sensitive Determination

Selective and sensitive determination of one of the purine nucleotides, inosine (INO) using a low cost carbon dot (CD) modified glassy carbon (GC) electrode in 0.2 M phosphate buffer solution (pH 7.2) was demonstrated in this paper.

scholarly journals Using seed respiration as a tool for calculating optimal soaking times for ‘on-farm’ seed priming of barley (Hordeum vulgare)

2021 ◽  
pp. 1-9
Author(s):  
Javier Carrillo-Reche ◽  
Adrian C. Newton ◽  
Richard S. Quilliam
Keyword(s):  
Morphological Changes ◽  
Low Cost ◽  
Germination Rate ◽  
Seed Priming ◽  
Embryonic Axes ◽  
Seedling Vigour ◽  
Soaking Time ◽  
On Farm ◽  
Seed Respiration

Abstract A low-cost technique named ‘on-farm’ seed priming is increasingly being recognized as an effective approach to maximize crop establishment. It consists of anaerobically soaking seeds in water before sowing resulting in rapid and uniform germination, and enhanced seedling vigour. The extent of these benefits depends on the soaking time. The current determination of optimal soaking time by germination assays and mini-plot trials is resource-intensive, as it is species/genotype-specific. This study aimed to determine the potential of the seed respiration rate (an indicator of metabolic activity) and seed morphological changes during barley priming as predictors of the priming benefits and, thus, facilitate the determination of optimal soaking times. A series of germination tests revealed that the germination rate is mostly attributable to the rapid hydration of embryo tissues, as the highest gains in the germination rate occurred before the resumption of respiration. Germination uniformity, however, was not significantly improved until seeds were primed for at least 8 h, that is, after a first respiration burst was initiated. The maximum seedling vigour was attained when the priming was stopped just before the beginning of the differentiation of embryonic axes (20 h) after which vigour began to decrease (‘over-priming’). The onset of embryonic axis elongation was preceded by a second respiration burst, which can be used as a marker for priming optimization. Thus, monitoring of seed respiration provides a rapid and inexpensive alternative to the current practice. The method could be carried out by agricultural institutions to provide recommended optimal soaking times for the common barley varieties within a specific region.

scholarly journals Revisiting Electrochemical Biosensing in the 21st Century Society for Inflammatory Cytokines Involved in Autoimmune, Neurodegenerative, Cardiac, Viral and Cancer Diseases

Sensors ◽  
2020 ◽  
Vol 21 (1) ◽  
pp. 189
Author(s):  
Susana Campuzano ◽  
Paloma Yáñez-Sedeño ◽  
José Manuel Pingarrón
Keyword(s):  
Point Of Care ◽  
Low Cost ◽  
Accurate Determination ◽  
Test Time ◽  
Electrochemical Biosensing ◽  
Recent Developments ◽  
Inflammatory Processes ◽  
Human Skills ◽  
Cancer Diseases

The multifaceted key roles of cytokines in immunity and inflammatory processes have led to a high clinical interest for the determination of these biomolecules to be used as a tool in the diagnosis, prognosis, monitoring and treatment of several diseases of great current relevance (autoimmune, neurodegenerative, cardiac, viral and cancer diseases, hypercholesterolemia and diabetes). Therefore, the rapid and accurate determination of cytokine biomarkers in body fluids, cells and tissues has attracted considerable attention. However, many currently available techniques used for this purpose, although sensitive and selective, require expensive equipment and advanced human skills and do not meet the demands of today’s clinic in terms of test time, simplicity and point-of-care applicability. In the course of ongoing pursuit of new analytical methodologies, electrochemical biosensing is steadily gaining ground as a strategy suitable to develop simple, low-cost methods, with the ability for multiplexed and multiomics determinations in a short time and requiring a small amount of sample. This review article puts forward electrochemical biosensing methods reported in the last five years for the determination of cytokines, summarizes recent developments and trends through a comprehensive discussion of selected strategies, and highlights the challenges to solve in this field. Considering the key role demonstrated in the last years by different materials (with nano or micrometric size and with or without magnetic properties), in the design of analytical performance-enhanced electrochemical biosensing strategies, special attention is paid to the methods exploiting these approaches.

Metal-organic framework derived metal oxide/reduced graphene oxide nanocomposite, a new tool for the determination of dipyridamole

2021 ◽  
Author(s):  
Naeime Salandari-Jolge ◽  
Ali A. Ensafi ◽  
Behzad Rezaei
Keyword(s):  
Myocardial Infarction ◽  
Graphene Oxide ◽  
High Performance ◽  
High Selectivity ◽  
Low Cost ◽  
Metal Organic Framework ◽  
Heart Patients ◽  
Reduced Graphene ◽  
Metal Organic

Dipyridamole is a prescribed medication used to treat cardiovascular diseases, angina pectoris, imaging tests for heart patients, and myocardial infarction. Therefore, high selectivity and sensitivity, low cost, and high-performance speed...

Sign in / Sign up

Export Citation Format

Share Document