scholarly journals Program Kitar Semula: Persepsi Masyarakat Terhadap ReDMac

2016 ◽  
Vol 8 (4-2) ◽  
Author(s):  
Ezanee Mohamed Elias ◽  
Zakirah Othman ◽  
Norlila Mahidin ◽  
Mohd Nasrun Mohd Nawi ◽  
Santhirasegaran S.R Nadarajan

The issue of solid waste management through recycling programs in Malaysia have long been discussed in the mainstream media. However, the issue is still not taken seriously since until today the recycling rate is still low about 11 percent compared to developed countries, which already exceeds 70 percent. The situation is alarming because of its implications on the health and size of landfill is increasingly limited. Therefore, this study aimed to investigate the level of customer awareness campaign supermarkets to recycle through the reward system through the use of automatic machines discharge bottle called Deposited Recycle Machine (ReDMac). Data were collected through a questionnaire and interviews. A number of respondents involved were 362 people and they were randomly selected from five different locations. The study found that 73.2% of respondents were aware of the recycling campaign held out of which 59.7% were admitted to participate in the recycling campaign, while 77.1% of respondents agreed with the reward system to encourage consumers to practice recycling. This study convinced that the best alternative is to recycle plastic bottle through the use ReDMac, as a new way to educate the society to love environmental.

2019 ◽  
Vol 4 (33) ◽  
pp. 162-182
Author(s):  
Oi Min Chong ◽  
Mohammad Tahir Mapa

The issue of solid waste management through recycling programs in our country has long been debated. However, the issue is still not taken the proper attention. recycling rate is still low at only 11 per cent compared to developed countries has reached 70 percent. The situation is alarming because its impact on health and sanitation as well as an area of the landfill is increasingly limited. Therefore, one of the steps that can be taken to solve the problem is through the implementation of various recycling programs in schools. This study was conducted to identify the perception and involvement of various recycling programs. Recycling is an effort to collect, process and reuse of materials use. This study uses a design review by applying the quantitative approach. Data were analyzed using SPSS by using the questionnaire. Descriptive statistics with the percentage obtained for use in the analysis of the study. The sample involves four students who were randomly selected in a secondary school in order to get feedback on the implementation of a recycling program. The results showed that students know the various recycling programs and they are well aware of the importance of recycling for analyzing the theories, but this practice is quite difficult. The overall analysis shows that perception and involvement of the recycling program is low. Therefore, all parties should school their energy and effort to make students aware of the importance of the implementation of recycling programs in order to solve the garbage problem in the school which in turn foster the practice of recycling among students. It is expected that the school can design a comprehensive new approach to attract the attention and interest of students to the various recycling programs, as well as to educate students to love the environment and maintain the cleanliness of the school grounds.


2020 ◽  
Vol 12 (12) ◽  
pp. 5111
Author(s):  
Oluwatobi Owojori ◽  
Joshua N. Edokpayi ◽  
Ratshalingwa Mulaudzi ◽  
John O. Odiyo

The present decade of Sustainable Development Goals has influenced higher educational institutions to assess and harness their great potential for waste diversion, recovery, and recycling. Institutional solid waste management in South Africa as a developing economy is yet to receive the required attention compared to developed countries. The measurement of the characteristics, and composition of solid waste is a fundamental pre-requisite towards creating a sustainable and viable process of solid waste management systems across institutions as this provides adequate and reliable information on the waste generated. This study aimed to determine the variations of waste components in the University of Venda (UNIVEN) by characterisation of the waste generated. Solid waste samples were collected from key activity areas and characterised using the ASTM D5321-92 method for unprocessed municipal solid waste. The recyclable, compostable, and non-recoverable components of the waste generated were found to be 61.7%, 34.4%, and 3.9%, respectively. The results of the waste audit revealed a strong potential for recycling in the institution (61.7%). This would decrease the amount of waste sent to landfills and enable the monetisation of the recyclable waste recovered from the waste stream, in this manner prompting a circular economy and a sustainable campus thereby lowering the waste footprint of higher education institutions.


Recycling ◽  
2019 ◽  
Vol 4 (3) ◽  
pp. 28 ◽  
Author(s):  
Nikhat Parvez ◽  
Avlokita Agrawal ◽  
Akhilesh Kumar

The rates of waste generation in India have been increasing with increasing population and urbanization. Since higher education campuses are like mini autonomous cities, they can act as a model for solid waste management (SWM) and enhance sustainable development. SWM is the controlled generation, storage, collection, transport, processing, and disposal of solid waste considering public health, conservation, economics, and environmental conditions. A SWM program on campus will benefit the campus through reduced resource consumption and waste diversion. Developing countries like India are lacking behind in SWM from the developed countries which are using advanced technologies along with efficient management. This paper will analyze the issues related to SWM at IITR (Indian Institute of Technology Roorkee) campus and provide feasible solutions to be implemented at IITR campus for becoming zero waste campus. The SWM at the IITR campus is disorganized and incompetent. Lack of awareness and improper collection, imprecise segregation, exposed transportation, inefficient processing and disorganized disposal of solid waste are the major reasons for it. IITR has the potential to manage its waste properly through various techniques discussed in this paper. These would reduce the amount of waste diverted to landfills and the problems arising on campus due to solid waste, thus leading to a zero waste campus. Other campuses like IITR with similar context and issues can learn from this case study and work towards a zero-waste campus. This paper identifies a need to implement a robust SWM at the IITR campus in India.


Author(s):  
Günay Kocasoy

Handling of solid waste has been a serious problem for countries all over the world. Increase in population, change in life standard and life style, industrialization and production of new products contribute to the increase in the amount of solid wastes and consequently the problems generated by them. Developed countries, being aware of the significance of the problems, established regulatory programs, while economically developing countries continued to handle the solid wastes in a very primitive way, such as dumping them into “open dumps.” In these countries recycling activities are mostly carried on by scavengers in a very primitive way. For the protection of the environment and sustainable development, economically developing countries should establish solid waste management policies, plan recycling programs and publish related regulations and by-laws, and strictly control the application of them. This is explored in this chapter.


2021 ◽  
Vol 16 (3) ◽  
pp. 974-988
Author(s):  
Vishnu J. Menon ◽  
Antony Palackal

Waste has always been a part of human life settlement and we have been either very careless with our waste by discarding it into the streets, the air, water, and in our backyards, or consciously dumping it close to those least powerful segments of the society at all times. Waste has been a problem for human beings and people have been least concerned about its eco-friendly disposal. Developed countries came up with many programmes, regulations and policies to address the municipal solid waste crisis, but still it is an unresolved problem. Municipal solid waste management is still a complex issue everywhere in the globalized and techno scientific world due to the carefree mindset, rapid urbanization process, unscientific development process and lack of social responsibility. In these circumstances, municipal solid waste managementcannot be addressed by mere technological innovations or adoptions. Moreover, the responsibility of municipal solid waste managementcannot be left to the Government alone. Instead, participation of various stakeholders needs to be ensured and coordinated for achieving sustainability. Taking Thiruvananthapuram Municipal Corporation in the state of Kerala, India as a case, this paper discusses the extent and ways in which various stakeholders engage in the two main approaches for municipal solid waste management, namely- centralized approach and decentralized approach. The research study was conducted during the period June, 2020 to December, 2020.


Author(s):  
Dr. Shweta Mathur

An appropriate technology for waste management in developing countries not only reflects the concern over the operation and cost of machines imported from developed countries but also entails the social and environmental goals of sustainable development based on techniques appropriate to specific settings. In connection with much of the published data, the information is of only partial benefit to a designer or planner, since the national averages presented are applicable only very broadly to the entire nation; that is, to adequately design a solid waste management system for a particular locality comprehensive information about the solid waste in that locality must be obtained. Since solid waste reflect the life-style of the generating populace, the character and amounts of various components in the solid waste stream will vary from locale to locale in Kota city. This paper presents the findings of a study carried out in economically different localities in Kota city to determine the solid waste composition based on field surveys and its management.


Author(s):  
Agamuthu Pariatamby ◽  
Mehran Sanam Bhatti

Malaysia, an upper-middle class country, populated with approximately 31 million people generated nearly 13.9 million tonnes of municipal solid waste (MSW) at per capita of 1.23 kilogram per day in 2016. Landfills and open dumps, being the absolute opposite of sustainable waste management, received about 80% of this generated MSW. Waste collection is on a par with developed nations, and almost all urban MSW is being collected for disposal. However, illegal dumping still occurs sporadically, and it can account for 10% of the total MSW generated. Hence, Malaysia is facing a stiff challenge in reducing the amount of waste sent to landfills and adopting sustainable waste management. National Solid Waste Management Department of Malaysia targets to divert 40% of MSW from landfills by 2020. There are total 296 landfills in Malaysia, and only 165 landfills are currently functional whereas the number of sanitary landfills is 8 out of 165 operating landfills. The national recycling rate of MSW was 17% in 2016 and the national recycling target in 11th Malaysian Plan is 22% by 2020.


2017 ◽  
Vol 2 (1) ◽  
pp. 48
Author(s):  
Adhikarla Baba Srinivas ◽  
Santosh Kumar Sar ◽  
Shweta Singh ◽  
Santosh Yadav

- Production of steel in steel Industry is accomplice for the generation of solid waste materials like sludge, slag, dust etc. In recent days most part of wastes are generated from steelmaking process which is a focus point now-a-days. The solid waste generation, presently in Indian steel industry is in the range of 400 - 500 kg/t of crude steel and recycling rate varies between 40 - 70 % which lead to higher production costs, lower productivity and further environmental degradation. It is very essential not only for recycling of the waste valuable metals and mineral resources but also to protect the environment. I Solid waste management in steel industry is broadly classified in “4 R” i.e. reduce, reuse, recycle and restore the materials. The aim of the paper is to explore the various developments for total recycling of solid waste generated from steel industry, so that the vision for making “clean & green steel with zero waste” can be achieved for survival and growth of steel business in future. Keywords—Steel, Reuse, recycle, solid waste, sustainable development.


2020 ◽  
Vol 3 (1) ◽  
pp. 135-150
Author(s):  
Sarmistha Biswas ◽  
Ananya Nandy ◽  
Nafisa Islam ◽  
Nazifa Rafa

Abstract Chattogram city is grappling with problems caused by inadequate solid waste management (SWM). Because the successful policy intervention regarding proper SWM depends on the intrinsic motivation of the city dwellers along with government intervention, the objective of this paper was to conduct an attitudinal study of the residents of Chattogram regarding their roles and responsibilities towards the SWM, and thus, the sustainable development of the city. It is a cross-sectional study based on a sample size of 150. Data was collected using a structured, pretested questionnaire. The result showed that the residents were unable to prioritize the city’s environmental problem over other problems due to the lack of knowledge and awareness about the environmental problems and its impacts on the Chattogram. However, in respect of SWM in the city, their eagerness for participation is appreciable, even though they are more dependent on government policy initiatives. An attitudinal gap was also observed here among the respondents pertaining to the vacuum of knowledge and awareness. Therefore, strong policy decisions and the awareness campaign can make people aware of their roles and responsibilities for a sustainable city and intrinsically motivate them to participate in SWM.


Sign in / Sign up

Export Citation Format

Share Document